Used Channel for sale (950)

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 350 kg, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, input voltage: 400 V, input current: 16 A, overall weight: 2,300 kg, warranty duration: 6 months, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2026, transport width: 1,059 mm, transport length: 1,838 mm, protection type (IP code): IP54, input frequency: 50 Hz, stroke length: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of statutory value-added tax, ex works and without packaging. Crsdov Rzwmspfx Aiisi The press has been cleaned, functionally tested, repaired and equipped with a new control system in accordance with EN16500. All replacement parts used are original parts from Strautmann. Technical details: Manufacturer: Strautmann Umwelttechnik Type: PP 1207 Bale dimensions (L x W x H): 1180 x 700 x 800 mm External dimensions (L x W x H): 1838 x 1059 x 2871 mm Transport height: 2050 mm Feed opening: 1190 x 600 mm Pressing force: 59 tons / 580 kN Throughput: 1 - 2 bales / hour Number of belt channels: 4 Binding material: Wire Weight of the press: 2,300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: indoors / outdoors, covered Includes starter kit for bale strapping, 19mm Serial number: 610.00.184 Year of manufacture: 2003

Condition: new, Factory-new electrically heated 1150L stainless steel agitator tank with insulation and propeller agitator, including operating manual and CE declaration of conformity. Type: EBB1150RWP Also available with alternative agitators and in other sizes. Volume: 1150L Dimensions approx.: Internal Ø 1190mm x cylindrical height 1000mm External Ø: 1390mm Total height: approx. 1300mm plus agitator drive Material: 1.4301 / AISI304 stainless steel Surface: IIIc/IIId / satin finish Internal welds ground smooth Max. operating temperature: 110°C Max. operating pressure: atmospheric - Upright design on four tubular legs with forklift channels Crsdew Dy D Dspfx Aiiji - Top: Central traverse with two hinged covers - Bottom: Flat sloped base with lateral outlet DN50 DIN11851 and butterfly valve, EPDM gasket - Insulation: 50mm mineral wool around the cylinder, hermetically welded stainless steel 1.4301 cladding Equipment: 1x Top traverse with two hinged cover halves, clamp function for the lid Stainless steel grating below the hinged lid, bolted and removable 1x Agitator flange on the top 1x Inlet port DN50 DIN11851 on the top 1x Outlet fitting with butterfly valve DN50 DIN11851, EPDM gasket 1x nameplate Propeller agitator for low-viscosity media Power: 0.75 kW Speed: 1410 rpm Operating voltage: 3PH 400V

Condition: used, This listing is for the Agilent 34970a Data Loger Switch Unit The unit is in full working condition and is ready for immediate use Key Features: 3-slot mainframe: Supports up to 60 2-wire channels using plug-in modules. Built-in 6½-digit DMM (Digital Multimeter): Measures voltage, current, resistance, frequency, and temperature. Plug-in Modules Available: e.g. 34901A (20-channel multiplexer), 34902A (16-channel actuator), 34908A (40-channel single-ended multiplexer), etc. Interfaces: GPIB and RS-232 standard (USB via adapter). Logging Capabilities: Can log data over time for test/monitoring applications. Scan Rates: Up to 250 channels/sec depending on configuration. User Interface: Front-panel controls with LCD display. Remote control via SCPI commands. Typical Applications: Environmental monitoring (temperature, humidity) Functional test systems Data logging in labs Automotive and aerospace test setups Csdpfx Aexhfcdjiiori Industrial process monitoring

Condition: good (used), Approx. 8 units of mobile flow rack shelving from Creform, FiFo system, assembly frame with flow levels – used: Price per unit, ex works: €400.00 (net)! Manufacturer: Creform Crsdezp Rn Iopfx Aiioi Type: Pipe and joint system Year of manufacture: unknown Dimensions: approx. 180x180x200cm 2 channels 9 swivel casters with brakes Roller rails Condition: good Available: immediately Location: Leipzig

Condition: excellent (used), Year of construction: 2010, operating hours: 40,000 h, functionality: fully functional, Used Tornos MultiSigma 8/24 Year 2010 40,000 operating hours Chip conveyor Robobar MSF-522-8 bar feeder, year 2010 Chip conveyor High-pressure pump Kraft and Bauer fire suppression system Machine in very good condition with dual pick-up Set of collets Set of bar feeder channels Crsdpfx Aiozpxk Reiei

Condition: excellent (used), MECALSA Continuous Industrial Fryer with Thermal Oil – Stainless Steel MECALSA continuous industrial fryer with a thermal oil heating system, designed for the continuous frying of food products in medium and high-capacity production lines. The equipment features a longitudinal process tank and a transport system that allows the product to remain in the oil for a controlled residence time. Indirect heating via a thermal oil circuit provides the necessary energy to the process while keeping the thermal fluid separate from the frying oil. Its construction, primarily in stainless steel, along with vapor extraction and process control systems, makes it particularly suitable for professional installations in the food industry. MAIN FEATURES -Manufacturer: MECALSA -Type: Continuous industrial fryer -Heating system: thermal oil -Continuous frying process -Longitudinal frying tank -Automatic product transport -Adjustable residence time depending on configuration -Circulation and control of frying oil -Independent thermal oil circuit -Indirect heat exchange -Temperature control -Piping and valve system -Vapor extraction system -Extraction hoods and ducts -Control electrical panel -Construction primarily in stainless steel -Industrial structure for continuous operation -Access points for inspection, cleaning, and maintenance -Integrable into automatic processing lines PROCESS Cedpszxwxxefx Aiijri The product is continuously fed into the MECALSA fryer and guided through the frying zone by the internal transport system. During this process, the product remains in contact with the frying oil at a controlled temperature for the time needed to achieve the required final characteristics of cooking, color, and texture. Heat is supplied through a thermal oil circuit, which transfers energy to the system without directly mixing with the oil used for frying the product. The vapors generated during frying are collected by the hoods and channeled to the extraction system. APPLICATIONS Especially suitable for manufacturers of pre-fried products, processed vegetables, potatoes, snacks, breaded products, and other food preparations that require a continuous frying process. Depending on the installed configuration, it can be used for: Potatoes and related products Vegetables Breaded or battered products Prepared meat products Fish and fish products Snacks Pre-cooked products Other specialties compatible with continuous frying It can be integrated with feeding systems, scalding units, dryers, conveyors, excess oil removal systems, coolers, IQF freezers, and packaging equipment. The combination of MECALSA technology, continuous process, and thermal oil heating provides an industrial solution for lines requiring uniform and controlled frying. Machine available for inspection. Additional technical information, production capacity, operating temperatures, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), functionality: fully functional, ABB Robotics IRB 6600 Robot 1 x ABB Robotics IRB6600 robot, serial number 66-68813 1 x ABB Robotics IRB6600 robot, serial number 66-68814 Cjdszm E Rrjpfx Aiijri 1 x ABB Robotics IRB6600 robot, serial number 66-68815 1 x ABB Robotics IRB6600 robot, serial number 66-68816 The IRB 6600 is a powerful 6-axis industrial robot for demanding applications that require flexibility, reach, and reliability. It is available in various configurations and supports payloads from 125 kg to 225 kg with arm lengths of up to 3.2 m. This makes it versatile for use in production environments. Its rear-inclined geometry enables improved accessibility and space-saving integration, especially in machine tending, spot welding, and material handling. The robot features advanced safety technologies such as collision detection, active braking, and path stabilization through the ABB TrueMove and QuickMove systems. Integrated monitoring tools support predictive maintenance, while the robust, IP67-certified design and reinforced structure make it suitable for harsh industrial environments. Note: The IRB 6600 model is no longer manufactured. Service and spare parts are still available for existing installations. -Payloads from 125 kg to 225 kg, reaches from 2.55 m to 3.20 m. -Rear-inclined design for better access and compact integration. -Equipped with active/passive safety: collision detection, path guidance, dual-channel stop. -Integrated load/motion monitoring for preventative maintenance. -0.1 mm repeatability and full IP67 protection for harsh environments. Maximum payload (kg): 225 Maximum reach (m): 3.2 Applications Spot welding, machine tending, material handling Mounting: Floor Environment: Foundry, standard industry Used item – normal signs of wear and tear. Further details, article numbers, and images available upon request. "Sample photos. The actual product may vary." Two-week commissioning guarantee. No further warranty. Spare parts are constantly available in stock. The robot is fully functional and can be inspected upon request. Free loading / ex works. The stated amount is net and applies per robot. The legally required VAT of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or forwarding costs vary depending on the number of items, weight, and desired delivery conditions. Shipping costs abroad on request – please specify country, city, and postal code. Forwarding costs on request – please specify delivery address.

Year of construction: 2008, operating hours: 12,897 h, condition: ready for operation (used), travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,600 mm, overall weight: 34,000 kg, total width: 11,000 mm, total height: 6,450 mm, product length (max.): 12,500 mm, spindle speed (max.): 2,500 rpm, tool weight: 25,000 g, number of axes: 5, This 5-axis SHW UFZ 6L Bed Type Milling Machine was manufactured in 2008. It features an impressive X-axis travel of 6000 mm, Y-axis travel of 2100 mm, and Z-axis travel of 1600 mm. The machine includes an automatic tool changer with a capacity for 150 tools and a robust clamping plate surface of 3600 x 3750 mm. If you are looking to get high-quality milling capabilities, consider the SHW UFZ 6L machine we have for sale. Contact us for further details. Spindle operating time: 12,897 hoursHydraulic operating time: 43,912 hours • W-axis travel: 1500 mm • Digital feed drives • X-axis: 2–20000 mm/min • Y-axis: 2–24000 mm/min • Z-axis: 2–24000 mm/min • Rapid traverse • X-axis: 20000 mm/min • Y-axis: 24000 mm/min • Z-axis: 24000 mm/min • Spindle • Head: Automatic universal milling head • Main spindle motor: Siemens 1PH7 167 Csdpfx Aijy Nzdcjiori • Gearbox: ZF 2K300 / SEW FF37 / FA47 B / KA Z37 • Repeatability: ±0.002 mm • Spindle Speed (60 min Max): 3200 rpm • Spindle Speed (15 min Max): 4000 rpm • Tool changer • Type: Automatic • Capacity: 150 tools • Max tool length: 400 mm • Max tool weight: 25 kg • Tool taper: SK50 DIN 69871 • Station: Pickup-station • Table/plates • Clamping plate surface: 3600 x 3750 mm • Electronics and control • Control panel: Integrated CNC in work platform • Servo motors: Siemens 1FT6 series • Drives/regulators: Indramat ECOdrive 3 • Measuring systems: Heidenhain LS 186C / LB 382C / ROD 480 / ROQ 425 • Electronic pressure switch: ifm PN 5, PN 7 • Power supply • Voltage: 400 V, 3-phase, 50 Hz • Power connection: approx. 80 kVA • Main fuse: 160 A (slow-blow) • Conductor cross-section: 70 mm² • Pneumatics and hydraulics • Pressure: 4–6 bar • Connection: G1/4 • Air consumption: approx. 320–400 l • Valve terminal: Festo CP10+ • Hydraulic system: Bosch with 1 x 50 l accumulator Additional equipment • CNC rotary table unit: Demmeler DRTN • Table surface: 2000 x 1800 mm • Max rotation speed: 4 min^-1 • Collision monitoring: Brankamp Typ CMS (1-channel) • Safety brake: Mayr Typ 891... • Cooling unit: Schimpke DK 38 V / BKW SK 250D • Coolant filter: Knoll KF110/1100 • Oil filter: ARGO D 062-156 • Chip conveyor: Richter SP 250/63 (x2) • Measurement system: m&h 20.10 Set Multi SK50 / m&h 35.10 TS plug • Lubrication: Automatic • Machine enclosure: 3-sided Technical Specification Taper Size SK 40

Condition: used, mileage: 186,635 km, power: 120 kW (163.15 HP), first registration: 03/2023, fuel type: diesel, overall weight: 3,050 kg, next inspection (TÜV): 05/2027, color: black, gearing type: automatic, emission class: euro6, number of seats: 6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle number (for inquiries): 66 Mercedes-Benz VITO MIXTO 116 LANG 9G-TRONIC Paint code: * 9197 Paint color Obsidian Black metallic MB 9197 Equipment: * 9197 Paint color Obsidian Black metallic MB 9197 * A1O Rear axle shaft manufacturer IFA * BB7 CO2-optimized brake system * C447 - * C70 Pedestrian protection * CF0 Basic chassis * CL1 Steering wheel adjustable in inclination and height * CL4 Multifunction steering wheel with trip computer * D57 Partition extending to pillar C with window * E07 Hill-start assist * E1D Digital radio (DAB) * E2R Radio generation 2 * E34 Buffer battery for start process * EA4 Audio 40 * ED4 Fleece battery 12 V 92 Ah * EL8 Two-way speakers in front * EW6 Pre-installation for Remote Services Plus * EY2 Pre-installation for Live Traffic Information * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F447 - * F48 Heater for windshield washer system * F61 Interior mirror * F66 Lockable glove compartment * FKB Combination vehicle * FR1 Rear camera, not foldable * FR8 Rear view camera * FY7 Multi-button remote control * G43 9G-Tronic * H00 Warm/cold air channel to the passenger compartment * H16 Seat heating for driver * H20 Heat-insulating glass all around * HH9 Semi-automatic controlled air conditioning system Tempmatic * HI1 Climate zone 1 (cold/comfort) Credpfx Aszhdw Toiiji * I52 HU Map Data Country Set 3 * IB6 Model series C447 Vito/V-Class * IG5 Basic * IK0 Complete vehicle * IL1 Domestic (Germany) * IL4 Region EU/EFTA * IL5 Left-hand drive * IL6 Metallic paint * IN2 Wheelbase 3200 mm, long overhang * J55 Seatbelt warning system for passenger seat * JA1 Warning light for windshield washer fluid level * JH3 Communication module (LTE) for Digital Services * JK3 Instrument cluster with pixel-matrix display * JW8 Attention Assist * JX2 Service interval 40,000 km * KB5 Main tank 70 liters * KP7 Exhaust gas purification SCR generation 4 * L Left-hand drive * LA2 Driving light assistant * LD9 Interior light(s) in the rear * LE1 Adaptive brake light * LX5 Europe * M60 Generator 14 V/250 A * M72 Vehicle compatible with HVO * MG9 Generator management * MJ8 ECO Start-Stop function * MK8 Speed limiter 210 km/h * MS1 Cruise control * MT6 Emission class Euro 6D N1 * MU4 Engine OM654 DE 20 LA 120 kW (163 hp) * MX0 BlueEFFICIENCY package * Q22 Trailer coupling, fixed ball head * R21 Wheel size group 1 * RF1 Tire manufacturer Continental (10) * RG7 Tires 225/55 R17 * RM1 M + S tires * RR6 Spare wheel with jack * RS7 Steel rims 6.5 J x 17 * S00 Airbag control unit generation AB12 * S23 Passenger seat, two-seater * SA1 Seat cushion depth adjustment for driver * SA6 Airbag passenger * SA8 Seat comfort package * SB1 Driver seat comfort * SE5 Lumbar support for driver seat * T14 Active locking mechanism for sliding door * T70 Childproof lock on doors in passenger compartment * U71 3-seater bench seat in the 1st row with foldable outer seat * V20 Interior lining, cargo compartment, panels at the top * V30 Side wall interior lining in the cargo/passenger compartment * V3L All-weather floor mats * V42 Tie-down rails on side wall at anchor strap * V43 Wooden floor * VD2 Roof lining standard * VF4 Fabric Caluma black * VV0 Welded nuts side wall for conversions * VV9 Attachment points in the roof frame * W16 Window in front left, fixed in side wall/sliding door * W17 Window

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 1,625 kg, product height (max.): 50 mm, product length (max.): 3,080 mm, product width (max.): 2,500 mm, TECHNICAL DETAILS Print Head Technology: Piezo inkjet technology with variable drop size Drop Size: 6–42 pl Ink Type: UV-curing inks Canon IJC357 or IJC358 Color Channels: 8 Standard Color Configuration: CMYK, White, Varnish, Light Cyan, and Light Magenta Maximum Media Area: max. 308 × 250 cm Maximum Printable Area: max. 309 × 251 cm Maximum Media Thickness: max. 50.8 mm Maximum Media Weight: max. 34 kg/m² Vacuum System: Independent vacuum zones for secure hold without taping Edge-to-edge printing possible RMO Specifications Maximum Roll Width: max. 220 cm Minimum Roll Width: min. 90 cm Maximum Roll Diameter: max. 24 cm Maximum Roll Weight: max. 50 kg Core Diameter: 3 inches Core Diameter approx.: 7.6 cm Speed and Productivity Maximum Throughput: max. 52.8 m²/h Production Mode: approx. 27.0 m²/h Quality Mode: approx. 19.8 m²/h MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 3,830 x 4,660 x 1,300 mm Weight: approx. 1,625 kg Power Supply: 2 × 200–240 V Frequency: 50/60 Hz Fuse Rating: 16 A Credpfx Ajzy Ngdsiiei Compressed Air: 6 bar EQUIPMENT RMO for roll media UV-curing inks Canon IJC357 or IJC358 Independent vacuum zones Edge-to-edge printing function Compressed air connection for cleaning and static control

Condition: used, maximum load weight: 32,090 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2027, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,685 mm, Year of construction: 2023, Equipment: ABS, Kässbohrer Tank Trailer STC 30 Code L4BH, for chemicals First registration: 01/2023 German registration, from first owner Approximate unladen weight: 6,910 kg Stainless steel chassis, highly polished BPW axles with large disc brakes, 430 mm 1st axle: lift axle Crank-operated support legs, steel, for full load 6 tires, size 385/65 R 22.5, tread depth 70 to 80% Aluminum rims KNORR trailer EBS Tank: 30,000 liters, made of stainless steel 1.4571 AISI 316 Ti Operating pressure: 3.0 bar / Test pressure: 4.0 bar Insulation: 100 mm glass wool 1 compartment with 3 bulkheads 4 manhole covers 1 venting valve, Fort Vale 1 safety valve 1 check valve Air line on the right side, DN 50, with TW 50 connection at the front right Heating preparation for 4-channel hot water 1 outlet, DN 100, uninsulated, with sampling tap at the rear right and TW 80 coupling 1 purging device Cedjzkybmepfx Aiijri Pneumatic bottom valve Hoses, left and right, DN 150, approx. 6 m long RENTING is the new BUYING; with us, it is also available as a full-service rental.

Condition: good (used), Year of construction: 2006, Previously installed on a Gildemeister TWIN 65 Maximum bar length: 3,300 mm Material feed slide length: XLL Maximum slide extension: 1,670 mm (with the shortest intermediate tube) Capacity: Credpszk E Irofx Aiioi Multi-surface magazine: 4 x 400 mm (1,600 mm contact area) including guide channels: Ø 46 + 66 mm

Condition: excellent (used), Double Vibratory Feeder / Positioner – Length 3.40 m – Stainless Steel Industrial double vibratory feeder/positioner, designed for feeding, distributing, orienting, and controlled transferring of products to the next stage of an automatic processing or packaging line. The unit incorporates two independent vibratory channels, each driven by its own vibration system, allowing the product to be distributed in a progressive and regular manner. This principle is particularly useful for preventing accumulation and achieving a more uniform feed to downstream equipment. With an approximate length of 3.40 m, the equipment features a robust industrial construction, primarily in stainless steel, suitable for professional lines in the food industry. MAIN FEATURES -Type: Double vibratory feeder / positioner -Approximate length: 3.40 m -Configuration: Double vibratory channel -Two independent feeding systems -Driven by electric vibrators -Controlled product distribution Crjdpozxmf Uefx Aiioi -Advancement by vibration -Continuous and uniform feeding -Positioning / orientation function depending on the product -Construction primarily in stainless steel -Open channels for easy access -Robust support structure -Design for continuous industrial operation -Suitable for integration into automatic lines -Can be used as a buffer between different stages PROCESS The product is received in the feed channels and, through the action of the vibratory motors, advances progressively along the equipment. The vibration allows the product to be distributed and spaced, providing a more regular feed to the machine located downstream. The double configuration allows the flow to be divided into two independent paths, which is particularly interesting when it is necessary to feed two inlets simultaneously, distribute a production, or improve the distribution of the product before a subsequent operation. It can be integrated with: Elevators Receiving hoppers Selection and sorting systems Slicers Weighers Dosers Fillers Packagers Conveyors Complete processing lines APPLICATIONS Especially suitable for food industries, fruit and vegetable processors, frozen food products, and packaging lines that need to regulate, distribute, or position the product before another machine. Depending on the configuration and characteristics of the product, it can be used with different solid or particulate products compatible with vibratory feeding. The combination of a double channel, 3.40 m in length, and independent vibratory drive provides a practical solution for achieving a continuous and organized feed within industrial lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2002, condition: good (used), Complete Desoutter screwdriver system consisting of: 1 x Transducer controlled angle screwdriver Desoutter ERA40J Art.Nr .: 6151650800 Torque range: 8 to 40 Nm Output: 3/8 " Number of revolutions. 900 min-1 Length: 458 mm Weight: 2.1 kg 1 x Transducer controlled angle screwdriver Desoutter ERA60J Art.Nr .: 6151650810 Torque range: 15 to 60 Nm Output: 3/8 " Number of revolutions. 570 min-1 Length: 469 mm Weight: 2.2 kg 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Moeliche screw strategies: Torque control with angle control Rotation angle control with torque control Crjdpfx Aiodcmizsisi Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 2 x motor cable for hand screwdriver 5 m length Art.Nr .: 6159170720 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Condition: used, machine/vehicle number: 313/5, Channel folding machine, folding machine, folding former, seam locking machine, folding former, sheet metal bending machine, profiling machine -Number: 14 pieces rolls -various: versions Cedpsd Sikfofx Aiiori -Recording: Ø 28 mm -Price: complete -Weight: 22.5 kg

Condition: new, Year of construction: 2025, Entry-level fiber laser metal sheet&tube cutting machine One machine with two uses. AT series cuts both metal sheets and metal tubes. The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Crodpfx Aiohv U Ucsisi Fast air cutting efficiency increases by 37% when cutting carbon steel. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Angle steel and channel steel cutting are standard with no need fior additional installation. Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3048*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.03mm Repositioning accuracy: ±0.02mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), Cable duct, cable tray, cable channel, cable route, cable profile, protective conduit, protective profile -Cable duct: 61 pieces -Dimensions: 3000 x 50 x 37 mm -Material: Steel, galvanized -Price: complete Crjdpfogxgl Nex Aiiei -Dimensions: 3000/820/H120 mm -Weight: 212 kg

Condition: good (used), Year of construction: 2010, Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners -EX: protected -Manufacturer: Nilfisk, ultra-compact industrial vacuum cleaner with side channel blower -Type: CTS22 H Z22 -Connection: 400 volts -Power: 2.2 kW -Number: 3 devices available Csdpfsgl Duzex Aiiori -Price per piece -Dimensions: 1100/770 / H1270 mm -Weight: 127 kg / piece

Condition: used, PTC thermistor relay, contactor, semiconductor contactor, contactor, relay, fiber optic converter, DIN rail power supply, rail power supply, power supply terminal, digital input terminal, digital output terminal, potential feed terminal, supply module, power supply, feed terminal -Manufacturer: Beckhoff, 8-channel digital input terminal Crjdpfjhr Suyox Aiioi -Type: EL1018 -Number: 7 pieces available -Price per piece -Dimensions: 15/70/H100 mm -Weight: 0.1kg/pcs

Condition: used, BHT INNOVA E3 – Professional Bronchoscope Washing Machine INNOVA – Professional Endoscope Washing Machine for Practices and Small Clinics The INNOVA™ E3s is the world’s best-selling BHT endoscope washing machine. This endoscope washing machine is compact and offers a high capacity for endoscopes or bronchoscopes. Depending on the reprocessing requirements, a total of 10 to 20 endoscope reprocessing cycles are possible per day. This makes it the perfect solution for private practitioners and small clinics that value safe hygiene, efficiency, and reliability. Reliability and the highest level of cleanliness in every cycle: Achieved by complying with DIN EN ISO 15883-1/-4 and the guidelines of the RKI, as well as numerous additional functions, e.g., thermal self-disinfection at 90°C in accordance with DIN EN ISO 15883-4, 4.8.1. - Flexible combination with another INNOVA® E2 or E3 for 30 to 40 reprocessing cycles per day. - Suitable for both glutaraldehyde and peracetic acid from a variety of suppliers. - Suitable for commercially available endoscopes from Fuji, Olympus, Pentax, Storz, and Wolf. - Single-channel connection or patented pressure chamber possible. - Option for thermal reprocessing of instruments, e.g., multiple biopsy forceps, polypectomy snares, etc. - Thermal disinfection of the final rinse water, as recommended by the RKI, in the DH version. - Secure documentation and traceability via batch control. Recording of user and endoscope via barcode scanner. - Data output via printer, data logger, or computer interface. Easy integration into existing computer systems. Codpfx Aein Edweiiori Number of endoscopes: For 2 endoscopes or 4 ENT endoscopes. Hygiene concept: Hygienic workflow, single-door. Channel connection system: Single-channel connection or patented pressure chamber system possible. Single-channel monitoring (CMS): No. Chemistry: Glutaraldehyde / Peracetic acid: Both possible: DH version (with boiler, for glutaraldehyde) or DC (filter solution, for glutaraldehyde or peracetic acid). Documentation and integration: Yes, interface for printer/data logger standard. Printer standard. Optional scanner/computer interface. Thermal reprocessing of instruments at 90°C: Possible with additional equipment. Electrical installation: 3-phase 400 V / 50 Hz AC+N+PE. Connected load: 11 kW. Fuse: 3 x 20 A. Year of manufacture: 19.01.2013 Item condition: used You can find more new and used items in our shop! International shipping costs on request!

Condition: used, Year of construction: 2007, machine/vehicle number: LC385, Used Complete Line for PET and Glass 2007 Rinsing Machine: Manufacturer: Dipran Model: Marea 12P Year: 2007 The used complete line for PET and glass bottles includes a high-quality rinsing machine. Manufactured by Dipran in 2007, the model is Marea 12P. This machine ensures thorough and efficient rinsing of the bottles, preparing them for the filling process. Filling Monoblock: Manufacturer: NELDEN Model: Giove FC VA 20-1 Big Year: 2010 The line also features a reliable filling monoblock manufactured by NELDEN. The model is Giove FC VA 20-1 Big, and it was produced in 2010. Using a gravity filling method, this monoblock precisely fills the bottles with the desired product, ensuring accuracy and consistency. Labeling Machine: Crjdpfxsvgufvo Aiioi Manufacturer: Newtec Model: Fix S2 E2 Year: 2007 Included in the line is a Newtec labeling machine, model Fix S2 E2, manufactured in 2007. With its mechanical cam, this machine efficiently applies labels to the bottles, providing clear and professional branding for the products. Case Erector: Manufacturer: SistAI Model: HM 2000 Year: 1995 To complete the packaging process, a case erector by SistAI is included in the line. The HM 2000 model, manufactured in 1995, is a reliable machine that swiftly erects cases for efficient packaging and transportation of the bottles. Additional Details: The line’s production speed with 5-liter containers is 1800 to 2000 pieces per hour. The rinsing machine utilizes microfiltered water for treatment. The capper of the filling monoblock is equipped with interchangeable heads and channels based on production requirements. Cap sizes for screw caps include aluminum caps measuring 35 x 18 and plastic caps measuring 48 x 17. Used Complete Line for PET and Glass 2007, this complete line is in excellent condition and ready immedately for sale

Condition: used, Year of construction: 1999, Overview  The Sensometic vacuum filler was built by Krones in 1999. The offer also includes rinser, Alcoa cappers and a blocked labeler. The machines can be inspected at any time.   Technical details  Output  12,000 bottles/h with 0.7l glass bottle  10,000 bottles/h with 1.0l glass bottle  6,000 bottles/h with 1.5l PET bottle  Formats  0.7l glass bottle  1.0l glass bottle  1.5l PET bottle  Plastic closure  Screw cap 28 mm  Push-on cap  Label  Body, back, neck loop, neck ring  Bottling product  Raspberry and various fruit syrups   Special hesperide vinegar   Filling temperature: 25°C   Running direction: L-R   Siemens S5   Scope of delivery  Rinser | Krones | Variojet | 3-channel rinser; steam, sterile water, air  Vacuum filler | Krones | Sensometic |   Capper | Alcoa | PP 10 / 360   Capper | Alcoa | K 10 / 360  Cold glue labeler | Krones | Prontomatic   Csdsukkvnepfx Aiisri

Condition: used, Tool holder, tool holder, milling holder, milling tool, chuck, milling cutter holder -Manufacturer: Eroglu, cutter holder with coolant channel in original packaging -Type: HSK 63-12-80-K .: A63.04.12.K -Transport dimensions. 470/100/H95mm -Weight: 1.2 kg Cjdpor Dgi Tjfx Aiijri

Condition: used, Year of construction: 1991, machine/vehicle number: R58, Used isobaric filler Machine Bertolaso 11000 bph year of the remark of isobaric filler 2021 suitable for bottling sparkling and semi-sparkling wines entrance on the left completely overhauled isobaric filler in all its parts with original Bertolaso spare parts (documentable) bottle sizes 85, 88, 90, 112 6 sets of channels with isobaric filler to make the levels the electrical panel of the Used Isobaric Filling Machine according to CE standards use and maintenance manual, spare parts manual available for this isobaric filler the production speed of isobaric filler is 9000 BPH with the sparkling wine the production speed is 7000 BPH with spumante. This isobaric filler is immediately available and delivered in case of purchase. We can assist the buyer in each step of the commissioning and testing operation of the Used Isobaric Filling Machine. How to build one isobaric triblock: The isobaric filler can be connected either to an automatic rinsing machine or to one or more cappers. We have 40 Bertolaso SBR grippers and two series of Bertolaso mushroom and satin cappers. One has 6 heads and reaches 9.000b / h, and one has 10 heads and reaches 14.000 BPH We can introduce all the machines in a sterile clean room with a filtration system. Cjdpfjvguv Usx Aiiori You can have the performance of an isobaric triblock with a Used Isobaric Filling Machine for natural cork and mushroom. Productivity can be from 11,000 to 14,000 BPH. It is possible to foresee a periodic maintenance program for isobaric filler to always have excellent efficiency. This involves both having spare parts in stock and foreseeing machine stops for a week/10 days. In case of purchase of the isobaric filler triblock, at least 9.00 meters by 2.50 meters, H 4.00 meters are required. The creation of a clean room guarantees the absence of contamination in the bottling phase.

Year of construction: 2015, condition: ready for operation (used), 1) Eccentric screw pump Johstadt AFJ 70.1 S, year of manufacture: 2011. 2) Eccentric screw pump Johstadt FJ 70.1 S, year of manufacture: 2015. 3) Eccentric screw pump Stöber/HEW/Netzsch DC30-2061-200-U/EEXF100L/U/NE40B, year of manufacture: 1989. 4) Centrifugal pump Stork CN32-200G1S3L1, year of manufacture: 1997. 5) Centrifugal pump Siemens&Hinsch m.b.H/Loher&Söhne AKHK6101/eA132 MA-U, year of manufacture: 1970. 6) Centrifugal pump with electric motor EMK/SPX EC2-HS160M1-2/CC40-200 R6S2L2. 7) Electric motor Siemens 1LA2 130-2CA60, year of manufacture: 1997. 8) Electric motor VEM. VEM electric motor. 9) Electric motor with gearbox Nord SK 132 S/4-2 TF, SK 33-132S/4-2 TF, year of manufacture: 2011. 10) Blower Gebhardt Ventilatoren KEM 61-0200-4 X-14-11. 11) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 Dex 80L/4K, year of manufacture: 2015. 12) Side channel pump SERO/VEM SVM 111 K,V,60-2,32 kPER 80G4 FDS, year of manufacture: 2013. 13) Electric motor with gearbox Getriebebau Nord SK 132 S/4 TF, SK 472-132 S/4 TF. 14) Electric motor with gearbox Getriebebau Nord SK 25-100 L/4 ED, SK 100 L/4 ED. 15) Electric motor with gearbox Getriebebau Nord SK 100 L/40, SK 25-100 L/40. 16) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 DCEx 80L/Ur, year of manufacture: 2015. 17) Centrifugal fan Hürner-Funken GmbH/MM Antriebstechnik HF R160-17D/FY 71 A-4 T, year of manufacture: 2001. 18) Centrifugal fan Konz Lufttechnik/ABB Motors MPR 351/M2V AD 80 B-2, year of manufacture: 2006. 19) Axial fan Helios HRFD 35/4 TK. 20) Centrifugal pump Bedu CRT 70/3, year of manufacture: 2015. 21) Electric motor with gearbox and magnetic field coupling Nord Drivesystems/Varisco SK 33-132MP/4 TF, V 60-2 STGTRM+X+Y, year of manufacture: 2017. 22) Pneumatic agitator PTM. 23) Pneumatic agitator. 24) Pneumatic agitator WP ARO MRV050A/6150051-14-P. Including various stators for progressive cavity pumps. Documentation available. On-site inspection is possible. Individual sale possible. Crodpfjv Extbsx Aiiei