Used Bundle Turner for sale (517)

Year of construction: 2026, condition: new, functionality: fully functional, pallet changer: manual, Samzon Pile-turner 104L is a stationary machine used for changing the pallet under a product. This model is often used in the paper-industry. A major advantage with this machine is that the platforms can close-down to 320mm, which means the Samzon Pile-turner can handle very low products. Samzon Pile-turner closes around the product with platforms, tilts back by 90 degrees, the tower is released and is rotated manually 180 degrees and once again locked. The bottom platform is then lowered back down, the platforms open, and the products has been placed on a new pallet. The pallet is fed into the machine using a pallet truck or pallet jack. The pallet turner can be delivered with a variety of extra equipment and surface treatments. Duodpfx Aajxyuqzsajp

Condition: ready for operation (used), Year of construction: 1995, functionality: limited functionality, total length: 12,000 mm, overall weight: 10,000 kg, total width: 2,400 mm, total height: 2,500 mm, Heavy-duty bundle crosscut saw with powered roller table and vibration automatic system. Video available via WhatsApp upon request. Dedpfx Aaoymnifjasup

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 5103230002, functionality: fully functional, power: 3.7 kW (5.03 HP), cutting height (max.): 360 mm, cutting width (max.): 500 mm, control type: manual, actuation type: hydraulic, total height: 1,410 mm, total length: 2,200 mm, total width: 2,385 mm, overall weight: 2,100 kg, table height: 660 mm, table height: 660 mm overall dimensions (W x D x H): 2385 x 2200 x 1410 mm band dimensions: 4420 x 34 x 1.1 mm Dusdpfx Aaoyml Tzeaep weight: 2,100 kg cutting speed: 20–100 m/min cutting capacity (square): 360 x 360 mm cutting capacity (round): 360 mm main drive motor power: 3.7 kW hydraulic pump motor power: 1.5 kW coolant pump motor power: 0.1 kW bundle cutting: 180–280 x 50–160 mm

Condition: refurbished (used), Year of construction: 2007, operating hours: 400 h, functionality: limited functionality, machine/vehicle number: 256777, saw blade diameter: 370 mm, feed rate X-axis: 250 m/min, total length: 10,800 mm, total height: 1,600 mm, total width: 2,700 mm, overall weight: 4,000 kg, type of input current: three-phase, cutting length (max.): 3,050 mm, High-performance circular saw - PEDRAZZOLI brand Year 2022: FULLY REFURBISHED by ORIGINAL PEDRAZZOLI Dusdpfx Aajxd T T Aeaep New bearings, hydraulics, covers, 100% precision Approximately 400 machine hours since refurbishment. For tubes and profiles with diameter: 12 - 122 mm Profiles: 12 - 95 mm Length: 25 mm - 3050 mm Bundle loader 6.5 m / max. 4 tons Machine can be powered up again (for inspection) Assistance available for loading outside the hall and onto truck. We are NOT machinery dealers.

Condition: used, CUT-TO-LENGTH LINE IPM 1250x1.5x15 Technical data Thickness range: 0.4 – 1.5 mm Coil Width: 350 - 1250 mm Coil weight: 15 Tn Coil outer diameter: max. 1580 mm Coil inner diameter: 508 - 610 mm End sheet length: 400 - 5000 mm Scope of supply 1. Uncoiling cantilevered mandrel with hold down roll 2. Guiding table 3. Levelling machine 4. Loop pit with tiltable covers 5. Start-stop shear 6. Band conveyor Dusdsymb Aropfx Aaaop 7. Stacker for 400 – 5000 length bundles 8. Switch cabinets & control desks 9. Hydraulics 10. Existing documentation 11. Hydraulics Thickness range: 0.4 – 1.5 mm Coil Width: 350 - 1250 mm Coil weight: 15 Tn Coil outer diameter: max. 1580 mm Coil inner diameter: 508 - 610 mm End sheet length: 400 - 5000 mm

Condition: used, Year of construction: 2015, TUBE LASER CUTTING MACHINE, Model LT8, made by ADIGE This tube laser cutting machine is in excellent working condition. Manufactured in 2015, it has been meticulously maintained, ensuring optimal performance. Technical data: - Round profiles diameter: 20 - 220 mm - Square profiles: Max. 200x200 mm - Max length: 8500 mm - Max tube weight: 32 kg/m - Laser Source: CO2 - Laser Power: 3 kW - Lens holders for: 5 & 7.5 “ - Bundle loader & Loading module: with 5 arms - Tube length loading: 8500 mm - Cutting head: 3D Tilt head - Max tube length unloading: 8500 mm - Unloading modules for tube lengths: 4500mm / 6500mm / 8500 mm - Front unloading conveyor for short parts: Up to 500 mm Scope of supply: - TRUMPF TruLaser Tube 5000 - Tube LoadMaster - Bundle loader with 8.5 m step loader - Finished part 8.5 m collecting table - Chiller Dusdpjyma Itefx Aaasp - Extractor Special features - Machine integration Rofin - Rear scrap conveyor - Capable for open profiles - Handling option for delicate tubes - High speed pierce boost - Weld seam detection - Artube modules second licenses + USB hardware key - CAD – CAM - Artube adv CAM features - Direct import steps / Iges files - Post Processor LT8 for Artube (1st license) - Production time and Cost calculation - Artube Service Contract Annual Fee - Advanced edit - Part viewer - Cut and fold library - Booster drilling process - Remote tele-diagnostic - Siemens 12 months full warranty - Auto focusing head - Protube Express off line nesting and scheduling - Protube Enterprise productivity & machine monitor - Whole nbar processing software - Pierce booster edge detection Round profiles diameter: 20 - 220 mm Square profiles: Max. 200x200 mm Max length: 8500 mm Max tube weight: 32 kg/m Laser Source: CO2 Laser Power: 3 kW Lens holders for: 5 & 7.5 “ Bundle loader & Loading module: with 5 arms Tube length loading: 8500 mm Cutting head: 3D Tilt head Max tube length unloading: 8500 mm Unloading modules for tube lengths: 4500mm / 6500mm / 8500 mm Front unloading conveyor for short parts: Up to 500 mm

Condition: used, Automatic packing machine Manufacturer: MAIR Model: .90.D.6.SL Automatic strapping machine with automatic wood support insertion Dsdoyma Adjpfx Aaaoup Manufacturer: ITIPACK Model: SKE_M_TS-31J-WILT_4MR Working range Diameter round: 16 - 90 mm Thickness range: 0.8 - 5.0 mm Length: 4 - 12 m INCLUDING - Rollway (aprox.24m) with 2 sections - MAIR .90/D/6/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles - Bundle weighting and emulsion draining station - Bundles transversal chain for storage section - Electrical control and operator control panel Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 4 – 12 m Square bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 2 Tn

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/7/CAR + RA1 SCOPE OF SUPPLY 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Single collecting cradle RA1, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. 4 Main electrical cabinet and operator control panel 5 Safety barriers around the machine & photelectric barriers & emergency line. Note: Safety barriers were installed by owner to have the machine under “safety conformity” TECHNICAL SPECIFICATIONS Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Spain Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Duodpfx Aajymax Ejajp Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/8 Scope of supply: 1 Loading table with: - Motorised slings loader, to load the complete bundle Duedpfxoymaw Us Aaasp - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Double collecting cradle RA3, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Note: with the double craddle system, it is possible to make the bundling and strapping in collecting craddle nº1, while production continues, without machine stop. 4 Main electrical cabinet and operator control panel NOTE:  This machine has worked very few hours.  Mechanical condition is very good.  It only requires cleaning & repainting to be “as new” Max. input tube length: 8000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Thickness Min.-Max.: 0.8 - 3.0 mm (depending on yield) Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motors power: 2.2 kW Cutting disc diameter: 300 mm

Year of construction: 2025, condition: refurbished (used), OFF-LINE Packing line .90.4.F Made by MAIR Djdpsymav Rjfx Aaasup Revamped 2025 Scope of supply: 1 New chain transport system, with 4 lifting chains, to collect the tubes from the roller conveyor. 2 Automatic tube by tube feeding unit 3 Single Row preparation section 4 Automatic bundle formation unit, with interchangeable: - 4 Bundle holding support for square bundle - 4 Bundle holding supports for hexagonal bundle 5 Strapping bridge with manual strapping unit Signode 6 Movable carriage for frontal extraction of finished bundle 7 Finished bundle storage unit 8 New Electrical control panel with operator control desk 9 New emulsion draining & bundle weighting system Tube diameter (Round): 16 - 90 mm Tube diameter (Square): 16×16 – 80×80 mm Tube diameter (Rectangular): 20×16 – 80×40 mm Squares bundles: 250×250 – 500×500 mm Hexagonal bundles (size of side): 150mm – 350mm Bundle weight: Max. 2Tn

Year of construction: 2019, condition: used, Automatic high-precision tube cutting machine TS72, made by ADIGE Cuts round, square, rectangular, and flat-oval tubes up to 102 mm in diameter. Efficient production: - Program up to 4 different cut lengths per tube - Continuous measurement changes for small batches Organized unloading: - Program up to 3 different unloading positions plus a scrap container. Non-Stop unmanned production: - Automatic production changes without tools. - High-capacity bundle loader holds up to 4000 kg of material. Superior Cutting Quality: High precision, efficiency, and versatility for tube cutting - Independently operated hydraulic material clamps ensure precise clamping and high cut accuracy. - Blade and clamps detach during return movement to prevent wear. TECHINCAL DATA Working range - Round tube cutting: from 8 to 102 mm - Square tube cutting: from 10x10 to 80x80 mm Dusdpfxsymangs Aaaep - Bar cutting: Up to 40 mm - Cutting length: From 20 mm to 3.000 mm Loading - Loading from bundle: Fully automatic - Unloading positions: 3 + 1 (scrap) Tools - Cutting blade diameter: From 200 to 350 mm General - Total installed power: 20 kW Round tube cutting: from 8 to 102 mm Square tube cutting: from 10x10 to 80x80 mm Bar cutting: Up to 40 mm Cutting length: From 20 mm to 3.000 mm Loading from bundle: Fully automatic Unloading positions: 3 + 1 (scrap) Cutting blade diameter: From 200 to 350 mm Total installed power: 20 kW

Condition: used, MAIR Automatic packaging machine MPS RH150/D/4/SL & SIGNODE Automatic strapping unit M400 1. MAIR PACKAGING MACHINE, model MPS RH150/D/4/SL Model MPS RH150/D/4/SL Pat. automatically packs round tubes in hexagonal bundles. The Machine allows the strapping operation to be carried out automatically in a fix position, with the bundle moving sideways and stopping automatically at the programmed strapping positions. It is composed of: - Four tube lift chain conveyors with carrier teeth and intermittently driven for the lifting of one tube at a time, coming from the threading machine, to the aligning area; - One driven rollway to align the tube against an adjustable end-stop, before the row formation; - Two storage areas for the tube row; necessary during the bundle evacuation cycle; - One sturdy structure in welded structural steel, forming a bridge; - Tube row handling system which picks up a row of tubes at a time from the second row storage and places it down onto the bundle forming brackets. - Handling is performed by a series of electromagnets which perform a rotary movement during the row transfer cycle; - Four driven vertical brackets for bundle formation and holding. They are provided of adjustable blades according to the required bundle size and shape and they will be lowered in order to allow the bundle laying down on the evacuation trolley. - Driven evacuation trolley, sliding on rails fixed to the floor and equipped with lower driven rollers and pairs of retaining vertical loose rolls. - Driven flat conveyor to transport the bundle after the strapping area. - Driven storage chains suitable to approach bundles at the selected quantity. - Drainage station for bundle lifting, to allow the coolant outlet from tubes; it is equipped with two hydraulic devices driven by a hydraulic power pack. - Control switch cabinet. 2. SIGNODE AUTOMATIC STRAPPING STATION, model M400 The formed bundle is automatically transferred, by the driven rollers of the evacuation trolley, to the automatic Strapping Station. The bundle will be stopped at the programmed strapping positions to allow the automatic application of the steel strap. It is composed of: - SIGNODE automatic Strapping Machine Model M400/PA/TSM for vertical strapping, - Pneumatic strapping floating head for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness; - 450 kg. jumbo coil dispenser with electrical unwinding; - Switchboard. Djdpfjymahysx Aaasup 3. WEIGHING STATION Model KG8/DY The weighing station weighs tube bundles by means of load cells. Bundles are transferred by the driven storage chains to the weighing position. The Weighing Station is located under the pneumatic lifting devices which will lift the bundle in order to allow the weighing operation. It is composed of: - Bottom frame to be fixed to the floor, complete with four supports, linkages and loading cells. - Top holding frame, able to receive the bundle lifting devices. - Compact weight transmitter. 4. MANAGEMENT INFORMATION SYSTEM Model DATAPACK 3/T The Datapack Management System software allows the operator : - To control and monitor tube production in real time. - To set the a new bundle configuration with its strap application positions. - To store the various bundle configurations and strap application positions into an archive where they can be easily retrieved. - To create batches of different bundle configurations and then load them into one production sequence. - Monitor all alarm and fault messages (trouble...

Condition: reconditioned (used), Year of construction: 2016, functionality: fully functional, Length 1.50 m - PLC-controlled Formats up to B4 Various distances between carriers possible Duedpfx Aajch Iv Neaop Preset counter, total counter Control via reading possible (e.g., bundle change)

Condition: excellent (used), Year of construction: 2009, PRATTO Mesh Welding line for 3D fence panels (and light mesh for construction use) Model Starweld POB-36-2100; Dsdpsudipfsfx Aaajup production of mesh panels and 3D/bent mesh panels; mesh width: 2100mm; wire dia. longitudinal + cross wires: 3-6mm; line wire spacing min.: 50mm; cross wire spacing min.: 25mm; SPM: up to 140; 5 x 250 KVA transformers; max. number line wires: 42 with 50mm wire spacing; max. length of panels: 6000mm (20′); line consists of: payoff system; straightening-propulsion for longitudinal wires; loop LAR; powered straightening; cross wire payoff unit; cross wire loop; auto cross wire feed; welder; mesh trimming shear; mesh bending press; mesh ejection + stacking-turner; exit rolls

Condition: refurbished (used), Year of construction: 2005, 1.) Pallet production line "Delta" 2.) Year of manufacture: 2005 3.) Year of repair and modification: 2024 Dedpsvzw Hfjfx Aaasup 4.) Condition: Excellent 5.) Capacity: 960 europallets/8h (Possibilities of production of various types of pallets) 6.) Power: 42KW 7.) Modifications: Complete new wiring with new "Schneider" PLC and new control program. New hydraulic pump and oil etc. 8.) Description: a) HYDRAULIC NAILER b) STAMP BURNER c) CORNER CUTTER d) PALLET TURNER (2 pallet stacking options: pallet in pallet or pallet on pallet) e) PALLET STACKER 9.) Upon agreement, the possibility of disassembling and assembling the machine at the customer's place. Possibility of agreement on maintenance and servicing of the machine. LOCATION - CROATIA ADDITIONALLY FOR SALE: Complete Croatian company with EPAL license, Cube sawing machine, "Toyota" gas forklift, complete equipment for a 40m3 wood drying chamber, multi-blade circular saw for longitudinal cutting of wooden elements, "Brugger" gasoline sawmill up to 70cm diameter, machine for cutting edges at 45 degrees, "ABAC B7000/10/500 FT10" piston compressor (7,5KW, 2023 year), air intake: 1210 l/min, "Posch" machine for sawing and splitting firewood.

Condition: excellent (used), Year of construction: 1999, FULLY AUTOMATIC - EVG G55/102 MESH WELDING LINE Construction year – 1999. Line is refurbished 4-5 years ago. Electrical cabinet completelly updated in software, PLC S7-405 and electrical systems in DECEMBER 2018. Line + cross wires from coils Mesh width: min. 1200mm to max. 2500mm Mesh length: min. 2000mm to max. 6000mm Separations between AT: 50mm – 1000mm stepless Separations between AL: 100mm, 150mm, and multiples Diameter AT: min. 3,8mm to max. 8mm Diameter AL: min. 3,8mm to max. 8mm Machine speed: max. 150 QD/min. Reel weight: max. 3000 kg Stack height: max. 700mm Panel weight: max. 150 kg Power rating of welding transformers at 50% intermittent duty: 960 KVA Drive power: 153kW Tension de red: 3 x 400V Network frequency: 50 Hz Dimensions (approx. mm) Machine: L x W x H Weight: G55L/102-RV 4900mm x 1800mm x 2300mm 15,000 kg T6B/102 7500mm x 2200mm x 1800mm 6,000 kg T6B/102 5200mm x 1700mm x 2200mm 4,200 kg Dedpfoxvmamsx Aaaoup Main Voltage: 3 x 400 V Frequency: 50 Hz Connection power: 960 kVA (50% S.I.) 192 kVA (drive force) 24 longitudinal wire straightener Longitudinal wire dragger Lars loop Longitudinal straighteners Longitudinal feed Welding head Shears Mesh extraction Turner stacker Exit table of 7m Cross feeders Cross wire drag

Condition: good (used), Busch Model B Label Puncher Professional machine made in Germany. Busch is a leader in the production of pallet turners and pushers. Very good condition, ready for production. The machine is equipped with a quick-action hydraulic unit. Safety guards, die-cutting clamps with micro-adjustment in every plane, and additional rotational adjustment. Quick and convenient die-cutting leveling. Adjustable feed table in every plane. Long delivery tail. Maximum format 230x230mm Weight 850kg 400V power supply Dusdpoyi Daxefx Aaaop The machine can be used to produce labels, calendars, sample cards, etc.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 12345, cutting length (max.): 7,000 mm, overall weight: 3,200 kg, height adjustment type: electric, total height: 2,800 mm, total width: 2,500 mm, saw blade width: 100 mm, tooth pitch: 40 mm, cutting width (max.): 950 mm, saw band length: 6,000 mm, Ecoline This saw was developed on the basis of the BN 110, which has been tried and tested hundreds of times over for decades. The base frame has a lower beam and is therefore suitable for heavy logs. The saw is equipped with a joystick for saw head control as standard. The feed is infinitely adjustable and is driven by a cable on both sides. The height is adjusted via a two-stage brake motor. This sawmill includes: 2x clamp turners - 1x log support arm 4x vertical fences - 1x manual fence (for short logs) 3x level compensation - 1x log roller with drive 3x log lifting arms with 4 holders 1x pre-cutter - 1x saw blade lubrication 1x water lubrication Siemens positioning control Basic cutting length: 7 m Log passage: 100 cm Ø Cutting width: 95 cm Hydraulic pump: 16 l Standard motor power: 22 kW Saw blade width standard: 100 mm Dedpfsq Tti Hox Aaasup This is a new sawmill with undercarriage. Non-binding offer with delivery time on request. Price only valid within Germany Export prices on request

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Pressing force: 532 kN Voltage: 400 V Max. bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 119.5 cm x 65 cm Condition: Excellent! Inspected and fully operational. FLITS Rental & Sales service: With every machine, we supply a bundle of tying wire (120 wires). Need more bundles of tying wire? Feel free to request a quote. At FLITS Rental & Sales, you choose speed, transparency, and reliability. We think along with you, respond immediately, and ensure you receive the right machine quickly. You are very welcome to view the machines on site. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment so that we have plenty of time to inform you properly and show you the right machines. Dujdpfxeylv Efo Aaajp We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile press Waste Waste processing

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, compressed air connection: 5 bar, Curd crushing, packing and transportation Line set The line is designed to simplify the ouverturning, crushing, weighing andtransport of finished products to the warehouse.With this equipment you can safely transport and weigh the product, whichsimplifies the work process and saves human resources that are essentialfor the company and use human resources in another essential place. Packing ~ up to 35 Pack / min Power ~ 3,2kW Air pressure in operation ~ 5 Bar Block form tipping ~ 2.5pcs / min !!! You can send separate parts: Form turner Weighing head Duedpfjv Diu Tex Aaaop Conveyor Z

Condition: good (used), functionality: fully functional, Year of construction: 2014, laser type: fiber laser, laser power: 4,000 W, CNC Laser Cutting System TruLaser Robot 5020 LW01 4000 Watt Max. working area (X x Y x Z) mm: 2000 x 1000 x 700 Laser power: 4000 watts Operating hours: 19,975 h Beam on hours: 10,353 h Standard equipment Machine: - KUKA Robot KR30 HA (High Accuracy) - Robot working area (according to layout) - Software bundle Laser Robot Tech - Documentation in hardcopy - Basic media supply equipment - Robot media guide - Robot elevation kit - KTL adjustment set - Mobile operator trolley for KCP - Compact dust extractor 3000 m³/h, plate filter, extinguishing device - Laser safety cabin - Extraction ducting - Laser protection window - Cable channels Robot: - Magnetic coupling Workpiece positioner: - Tilting rotary positioner DKP400.1 - Energy supply for DKP 400.1 - Actuator/sensor interface for DKP 400.1 - 3D clamping plate 800x100 mm Demmeler system - Two-station rotary table - Active safety for rotary table partition - Energy supply for rotary table Dodpfx Aaeyifr Hoaoup - Actuator/sensor interface for rotary table - Flexible fixture mount rotary table - Modular clamping system - Stand for modular clamping system incl. counterholder Extended laser equipment: - TruDisk 4002 - Chiller for TruDisk 4002 - 30m fiber optic cable Technology package: - Laser welding technology package - Option: motorized focus adjustment - Option: TeachLine - Gas supply block for argon shielding gas Laser safety cabin: - Automatic sliding door - Video monitoring with camera

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Akebono banding machine OB 360, year 2018, workshop tested. Bundle width: approx. 20 - 420 mm. Bundle height: 2 - 210 mm. Band width: 29 mm. Machine dimensions: 57 x 28 x 49 cm. Weight: 26 kg. Voltage: 230 Volt, 50 Hz. Material: film, white or brown paper. Activation via foot switch, start button, or automatically via photo sensor. Band tension can be continuously adjusted from 0.5 – 3.0 kg. Includes operating manual, spare parts list, and wiring diagram. Dsdpfx Aoylmb Reaaeup

Condition: used, RSA RASACUT SC 3000 – Complete automatic tube cutting, deburring, measuring, cleaning & drying line This is a complete RSA high-performance tube processing line for continuous production, from stock tube to finished fixed-length tube sections up to 3,000 mm. The system integrates the full workflow: Dujdoyllvyjpfx Aaaop Bundle Loader → Cutting → Deburring → Measuring → Cleaning (washing) → Drying, with automatic transfer between stations. KEY FEATURES · Fixed length cutting up to 3,000 mm · Complete RSA line: Bundle Loader + Cutting + Deburring + Measuring + Cleaning (washing) + Drying · Automatic tube singulation from bundle magazine · Servo-controlled saw forward feed with programmable cutting parameters · Automatic interlinking between stations (no manual adjustment required) · Deburring with 360° rotation, inside + outside edges · 100% length measuring with automatic rejection · Integrated washing and drying system for finished tube preparation · Siemens control: S7-300 + OP17 · Supplied with a large set of wrap-around jaws TECHNICAL DESCRIPTION 1. Bundle loader magazine The tube bundle is loaded by crane or forklift into the magazine. The system automatically singulates the tubes and feeds them into the roller infeed, allowing continuous production from stock tubes up to 8,000 mm. 2. Cutting | RSA RASACUT SC 3000 Automatic sawing unit with servo-controlled saw feed and electronically controlled length stop. Tubes are clamped and cut to the programmed fixed length, with programmable cutting parameters for repeatable cutting results. 3. Deburring | RSA RASAPLAN XY 3000 Automatic end deburring system using high-performance brushes on both sides. Each tube rotates 360° during brushing, enabling simultaneous inside and outside deburring of both end faces. Automatic adjustment is performed from the central control. 4. Measuring | RSA RASACHECK 3000 A Integrated length measuring station providing 100% control of finished parts. Workpieces outside the programmed tolerance limits are automatically rejected, ensuring only compliant parts proceed to the next stages. 5. Cleaning | RSA RASACLEAN ET 3000 Washing system designed for thorough removal of swarf and dirt particles. Workpieces pass through a sealed washing zone where the cleaning medium is applied under pressure and contaminants are collected in a swarf filter. 6. Drying | TURBODRY Hot-air drying station with adjustable air volume and temperature. Removes droplets and condensation after washing, delivering dry tube sections for downstream handling. 7. Tooling | Large set of wrap-arount jaws Supplied with a large set of wrap-around jaws covering multiple tube diameters, enabling quick changeovers without additional tooling. WORKING RANGE · Round tube diameter: 10 to 90 (101) mm · Wall thickness: 0.6 to 6 mm · Stock length (incoming tubes): 8,000 mm · Fixed cut length (finished parts): 150 to 3,000 mm (Up to 2,000 mm for Ø 10–14 mm) · Tube weight: Max.10 kg/m · Length/diameter ratio: 2:1 · Length tolerance: Ø10–49 mm ±0.2 mm | Ø50–74 mm ±0.25 mm | Ø75–90 mm ±0.3 mm Can be inspected in production (seen running). Contact us for a quote, full details and inspection arrangements. Round tube diameter: 10 to 90 (101) mm Fixed cut length (finished parts): 150 to 3,000 mm (Up to 2,000 mm for Ø 10–14 mm) Length tolerance: Ø10–49 mm ±0.2 mm | Ø50–74 mm ±0.25 mm | Ø75–90 mm ±0.3 mm Wall thickness: 0.6 to 6 mm Tube weight: Max.10 kg/m Length/diameter ratio: 2:1 Stock length (inc...

Condition: new, Year of construction: 2026, type of input current: AC, input voltage: 400 V, overall weight: 66 kg, Our electric chain saw with 5kw is ideal for sawing bundles of meter wood in connection with our sawhorse. Dsdpfx Ajfnrx Toaaeup By sawing whole bundles of firewood meter wood an enormous amount of manual work is not necessary! In a 1-man operation, up to 1 ster of wood and approx. 5 ster per hour can be processed within a few minutes. The average time per cut is 1.5 minutes.

Condition: new, Year of construction: 2026, Oy Foudila Ab is a company, in Kaskinen, Finland with over 45 years of experience in equipment for timber handling. For the past 15-20 years, we have also been active in pallet industry and have developed a lot of machines over the years for nailing, automatic timber feeding and stacking. We manufacture both standard machines and customized solutions for the customer's purposes as stand-alone machines or machine lines. Duodpfx Aaoyk Tlgsajp This machine is a flexible and efficient automatic board feeder developed for pallet production machines, but also well suited for other applications within the wood industry. The machine is specifically designed to integrate with both deck nailing machines and leg nailing machines, regardless of brand or capacity. We have supplied automatic board feeding systems to nailing machines from, among others, Cape, Corali, Storti, IMH, IM Hart, Viking and Mychrome. Thanks to the reliable vacuum system and the simple maintenance-free one-piece feeder – based on our own patented solution developed more than 40 years ago – only minimal adjustments are required when changing dimensions. This results in short changeover times and high operational reliability. The machine equipment also includes a tilting package lift that tilts the package approximately 10 degrees. This ensures that the boards remain stable and do not fall apart when the straps are removed, even if the boards are not perfectly aligned in the package. As optional equipment, the system can be complemented with: - Automatic turner - Vision/Camera system - Automatic removal of sticks between board layers The end result with this type of feeders is a reliable and flexible high-quality solution that enables more productive and cost-efficient pallet manufacturing. Material dimension of a standard machine: Board length: 600-1600mm, board width: 60-150mm, board thickness: 16-32mm Package length: 800-1600mm (packages with boards shorter than 800 should be on a EUR-pallet), package width 800-1200mm, package height: 0-1400mm Feeding capacity: 50 boards/min (with board width 100mm) Machine dimensions (LxWxH): 4300x3700x2800mm The machines is CE-marked. Do not hesitate to contact us for more information, pictures and videos.