Used Bundle Machine for sale (64,725)

Condition: used, Year of construction: 2003, Manufacturer: Pester pac automation Model: PEWO-pack 450 (with PEWO-therm tunnel) Year: 2003 Type: PE shrink wrapper/band wrapper with shrink tunnel Application: bottles, vials, vertical cartons, etc. Maximum speed: 60 products/min Passage width: 450 mm Configurable batch sizes Product guidance via upper belts and support rails Film type: PE Film width: 50–250 mm Film thickness: 0.025–0.10 mm Max. roll diameter 300 mm. Power supply: 3×400 V + N + PE, 50–60 Hz. Installed power: 10 kW (≈ 19.0 A) Air pressure: ≈ 5–10 bar Rbodpex R D Adjfx Ahvow The machine is sold with a dual-position feed conveyor: Feeding system for shrink wrapper Accumulation conveyor feeder for manual packaging Various formats available Complete documentation

Year of construction: 1998, condition: excellent (used), Machine available short-term (end of March) Rsdjyt Iznspfx Ahvobw Film wrapping system

Condition: ready for operation (used), functionality: fully functional, cutting length (max.): 3,550 mm, cutting width (max.): 530 mm, overall weight: 9,000 kg, stroke length: 100 mm, TECHNICAL DETAILS Usable cutting length (as double guillotine): 3,200 mm Usable cutting length (as single plate shear): 3,550 mm Press stroke: 100 mm Press width: 550 mm Min. cutting width: 18 mm Max. cutting width: 530 mm Scrap setting range: 0/50 mm Operating pressure: 6/7 bar Redpfoyf Eucsx Ahvsbw MACHINE DETAILS Installed total power: 13.9 kW Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,700 x 1,800 mm Weight: 9,000 kg EQUIPMENT Robust steel construction Blade beam made of cast iron Self-lubricating prismatic guides Adjustable rear support Press for holding the veneer package during cutting Photoelectric cells Electronic programming device Perimeter safety guards

Condition: used, Fully automatic packaging machine for products such as cans, glass bottles, and plastic bottles in shrink film, where the final output is multi-pack bundles with a defined number of products. The machine features robust Italian construction, high reliability, and quick format changeover for various product dimensions. Manufacturer: ZVT Model: PSP 032 S Maximum output: 30 cycles/min (two lanes) Output for 1.5 L bottles: up to 21,000 bph (multipacks 2x3) Rjdpfx Ahexpn Edovobw Output for 0.5 L bottles: up to 43,000 bph (multipacks 4x3) Electrical power: 94 kW Air consumption: 7 l/min/cycle Dimensions: Installation length approx. 10,000 mm, width approx. 1,700 mm, height: 2,000 mm. Complete and original technical documentation. Technical condition: used machine

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, overall weight: 5,000 kg, input current: 44 A, table width: 1,200 mm, table length: 2,700 mm, The compactor is designed to compact the bottoms and tops of pallets. After one cycle one pallet is nailed. Nailing is carried out mechanically. The machine automatically takes nails from the storage bins, where they are in bulk. The pallet components are taken from the external magazines by two people . The XP 1000 nailing machine is designed to produce industrial pallets in the 800-1200/1200-2600 size range . The nailing cycle is adjustable from the control panel , takes a minimum of 10 seconds . Hammer plates adjustable on the full range of hammer . Standard equipment of the nailing machine includes 16 hammers on eight plates and one set of 800/1200 pallet molds . Other molds on request for an additional fee . Rjdpfx Ajt Tyn Sshvebw The performance of the machine depends on the workers and their speed in stacking the parts.

Condition: used, Year of construction: 2001, ATS-CE 340/30 bundling machine Banding machine with temperature welding Band width 30mm Paper and film can be used as banding material Cooling time setting Extras: Jumbo dispenser Rbjdpfsvthwfjx Ahvjw 2x available. Price plus VAT EXW. All information without guarantee. Subject to prior sale. Dealer business. The sale is made without any warranty.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, rotational speed (max.): 2,500 rpm, swing diameter over bed slide: 470 mm, center width: 1,000 mm, TECHNICAL DETAILS Distance between centres: 1,000 mm Swing diameter over bed: 470 mm Spindle speed ranges 1: 50–270 rpm 2: 150–850 rpm 3: 450–2,500 rpm MACHINE DETAILS Redpjywg Rdsfx Ahvjbw Electrical supply Mains voltage: 415 V Phases: 3 Frequency: 50 Hz Control voltage: 24 V Main motor power: 7.5 kW Main motor current draw: 13 A Auxiliary motor power: 0.173 kW Auxiliary motor current draw: 1.55 A Total motor power: 7.673 kW Total current draw: 14.55 A

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine. -The TFON Leveltech® is a robust and precise leveling machine designed to handle a wide range of material thicknesses with efficiency and ease. Engineered for reliability and performance, it ensures flat, smooth surfaces on metal sheets and strips to meet stringent quality standards Key Specifications: -Material Thickness: 1 mm – 30 mm. -Maximum Material Width: 1,600 mm -Minimum Material Length: 145 mm Redpfxskyrpho Ahvebw -Quick Change System for Straightening Rollers: Standard -Flattening Gap Adjustment: Servo Hydraulic with PLC Control. -Machine Dimensions (L × W × H): 5,465 × 6,735 × 2,300 mm. -Total Weight: 40.000 kg

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine Series. -Model: L-9060. -Material Thickness: 1.0 mm – 30.0 mm. -Maximum Material Width: 600 mm. -Minimum Material Length: 145 mm. -Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 26.000 kg. Machine Dimensions (L × W × H): 4,400 × 7,185 × 2,260 mm Model: L-9011 Material Thickness: 1.0 mm – 30.0 mm. Maximum Material Width: 1,100 mm. Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 31.000 kg Machine Dimensions (L × W × H): 4,600 × 7,185 × 2,260 mm Model: L-9013 Material Thickness: 1.0 mm –30.0 mm Rbsdjhwb U Tepfx Ahvsw Maximum Material Width: 1,300 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 35,000 kg Machine Dimensions (L × W × H): 5,000 × 7,185 × 2,260 mm Model: L-9016 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,500 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Weight: 40.000 kg Machine Dimensions (L × W × H): 5,200 × 7,185 × 2,260 mm Model: L-9020 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 2,000 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Dimensions (L × W × H): 5,700 × 7,185 × 2,260 mm.

Condition: new, Year of construction: 2025, *TFON Leveltech® Leveling Machine Series. -Models: M-5560, M-5511, M-5513, M-5516. -Engineered for precise leveling of materials with a thickness range from 1.0 mm to 15.0 mm, these models offer flexibility in material width and advanced control features for optimal performance -Material Thickness: 1.0 mm – 15.0 mm -Maximum Material Width: M-5560: 600 mm. M-5511: 1.100 mm. M-5513: 1,300 mm. M-5516: 1,500 mm. Minimum Material Length: 110 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Machine Weight: M-5560: 12.000 kg M-5511: 15.000 kg M-5513: 18,000 kg M-5516: 19.000 kg Machine Dimensions (L × W × H): Rbsdpshwb Uwjfx Ahvew M-5560: 2,800 × 2,905 × 1,950 mm M-5511: 3,300 × 2,905 × 1,950 mm M-5513: 3,500 × 2,905 × 1,950 mm M-5516: 3,700 × 2,905 × 1,950 mm

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Rodpfxeyahv Ss Ahvjbw Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Semi­au­to­ma­tic machi­ne Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Capa­ci­ty: Up to 10 pou­ches / min. Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling. Redjx Utd Eopfx Ahvobw

Condition: used, Year of construction: 2014, Technical details: Rbedpfx Ahjyv Erdovow max. turning diameter: 350 mm turning length: 540 mm control: 0i-TD swing dia.: 510 mm bar material dia.: 66 mm spindle bore diameter: 76 mm travel -x axis: 200 mm travel -z axis: 560 mm Spindle 1 RPM: 4000 1/min Spindle 1 Power: 18,5 kW turret stations / rotary tool stations: 12/0 BMT 55 Rapid traverse feeds x/z: 24/ 24 m/min tailstock quill taper MT: MK4 (Live) Tailstock Travel: 490 mm tailstock quill stroke: 80 mm tailstock quill diameter: 75 mm dimensions of the machine ca.: 3500 x 1400 x 1850 mm total power requirement: 32 kW weight of the machine ca.: 4 t Accerories Chip conveyor Parts catcher Spindle 1 Chuck 200 mm manual tool eye Samsung turning center in excellent condition with rotary tools, y-axis and subspindle for complete manufacturing of components. *

Condition: used, Year of construction: 2015, Technical details: max. turning diameter: 350 mm turning length: 540 mm control: 0i-TD swing dia.: 510 mm bar material dia.: 52 (66) mm spindle bore diameter: 61 (76) mm travel -x axis: 200 mm travel -z axis: 560 mm Spindle 1 RPM: 4000 1/min Spindle 1 Power: 18,5 kW turret stations / rotary tool stations: 12/12 BMT 55 Power rotary tools: 3,7 /2,2 kW RPM of rotary tools: 6000 1/min torque rotary tools: 26,2 Rapid traverse feeds x/z: 24/ 24 m/min tailstock quill taper MT: MK4 (Live) Tailstock Travel: 400 mm tailstock quill stroke: 80 mm tailstock quill diameter: 75 mm dimensions of the machine ca.: 3500 x 1400 x 1850 mm total power requirement: 32 kW weight of the machine ca.: 4 t Accerories Chip conveyor Parts catcher Rbodpfsyv En Sox Ahvow Spindle 1 Chuck 200 mm manual tool eye Samsung turning center in excellent condition with rotary tools, y-axis and subspindle for complete manufacturing of components. *

Condition: new, Year of construction: 2026, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. Rbedpoq N Ud Isfx Ahvjw 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, We are selling our Knuth Werkzeugmaschinen GmbH lathe. High-quality centre lathe with leadscrew and feedshaft, equipped with a 3-axis position display. We are relocating and no longer require the machine, so it is available for sale. It is currently still in operation and can be inspected on-site. Proven classic with gear transmission: - Cost-effective and retains its value - Clearly arranged control panel with ergonomically positioned selector levers - Camlock spindle mount D1-6 - Wide, ground and hardened bed with a solid one-piece cast base - Tailstock can be offset laterally for taper turning - Large selection of thread pitches - Removable gap bridge for machining large diameters - Stop spindle with four adjustable length stops - Optional: quick-change toolpost system, among others 3-axis position display: - Higher machining accuracy - Reduced error rate - Greater production reliability - Significant time savings - Increased productivity - Optimal legibility of the display - User-friendly functions - Clearly arranged keypad - Resolution 0.01 / 0.005 mm - Pre-setting of coordinate values - Retains axis position when display is switched off - Bolt hole circle calculation - Integrated calculator function - Memory for 10 tools - Switch between radius/diameter display - mm/inch conversion - Easy mounting, maintenance-free operation - Display of cross slide (Z0) and carriage (Z1) both individually or as a differential/sum value on lathes Technical data – Turnado 230/1500 – Centre lathe with leadscrew and feedshaft Working area - Centre distance: 1500 mm - Max. swing over bed: 460 mm - Max. swing over cross slide: 270 mm - Max. swing over gap bridge: 690 mm - X-axis travel: 285 mm - Z1-axis travel: 128 mm - Gap bridge length: 165 mm - Bed width: 300 mm - Top slide swivel range: ±52° Main spindle - Spindle speed (12 steps): 25–2000 rpm - Spindle bore: 58 mm - Spindle mount: Camlock D1-6 - Spindle taper: MT 6 Feed - X-axis feed: 0.014–0.784 mm/rev - Z-axis feed: 0.031–1.7 mm/rev Rbodpfx Ahsyxfuqsvew Thread cutting - Metric threads (41): 0.1–14 mm - Diametral pitch threads (50): 4–112 DP - Module threads (34): 0.1–7 mm - Whitworth threads (60): 2–112 TPI Tailstock - Tailstock quill diameter: 60 mm - Tailstock taper: MT 4 - Tailstock quill travel: 120 mm - Tailstock lateral adjustment: ±13 mm / ±0.5" Drive capacities - Main drive motor power: 5.5 kW - Supply voltage: 400 V Dimensions and weight - Dimensions: 2750 x 1080 x 1340 mm - Weight: 1970 kg

Condition: not inspected (used), Year of construction: 2014, machine/vehicle number: 12097, CNC Milling Machine XYZ SMX3500 The machine is in very well-maintained condition. ● Condition: Not inspected ● Delivery terms: Free on truck (FOT) ● Location: 42477 Radevormwald, Germany ● Availability: By arrangement – Collection date for the item is set for 06.05.2026. Unfortunately, collection outside of this timeframe cannot be accommodated. ● Payment terms: Advance payment by bank transfer ● Internal ID: DÄ10 ● Power-on demonstration possible: Yes Technical specifications: ● Control: PROTO TRAK SMX ● Table dimensions: 1200 x 300 mm ● Spindle speed: 5,000 rpm ● Main drive power: 3.75 kW ● 400 V ● 50 Hz Scope of delivery: ● Available manuals (completeness not guaranteed) ● Hoffmann vice, jaw width: 125 mm ● Machine lamp Dimensions & weights: ● Installation dimensions (L x W x H approx.): 2000 x 2000 x 2500 mm ● Weight approx.: 2,500 kg Redpfxsyvi Enj Ahvjbw If you have any questions or would like to arrange an inspection, please feel free to contact us! Additional notes: ► On request, we can offer transport to the destination ► The quoted price is net, plus VAT ► The goods are sold under exclusion of any warranty ► Technical data provided without guarantee ► Subject to prior sale ❗Sale of the item is exclusively to businesses❗

Condition: not inspected (used), Year of construction: 2014, machine/vehicle number: SL375, CNC Lathe XYZ SLX355 ● Condition: Unchecked ● Delivery terms: Free loaded on truck ● Location: 42477 Radevormwald, Germany ● Availability: By arrangement – The pickup period for the equipment is set for 06/05/2026 and 07/05/2026. Unfortunately, collection outside this timeframe cannot be accommodated. ● Payment terms: Advance payment – by bank transfer ● Internal reference number: DÄ5 ● Inspection under power: Yes Technical specifications: ● Control system: PROTO TRAK SLX ● Drive power: 5.5 kW ● Spindle speed: max. 4000 rpm ● Turning length approx.: 750 mm ● Swing over bed approx.: 400 mm ● Swing over cross slide approx.: 180-200 mm Equipment: ● Three-jaw chuck (diameter: 200 mm) ● Tailstock ● Quick-change tool post Scope of delivery: Rbsdjyvi A Tjpfx Ahvew ● Available manuals ● Set of quick-change tool holders with turning tools ● Four-jaw chuck (Röhm, diameter: 160 mm) ● Toolbox with accessories as shown in the images Dimensions & weight: ● Footprint (L x W x H) approx.: 2300 x 1400 x 1900 mm ● Weight approx.: 2000 kg If you have any questions or wish to arrange an inspection, please do not hesitate to contact us! Additional notes: ►Transport to the destination can be offered upon request ►The offer price is net plus VAT ►The equipment is sold with exclusion of any warranty ►Technical data provided without guarantee ►Subject to prior sale ❗Sale exclusively to business customers❗

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: SOP10107, travel distance X-axis: 355 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 455 mm, table width: 381 mm, table length: 457 mm, spindle speed (min.): 10,000 rpm, number of slots in tool magazine: 8, XYZ Machine Tools XYZ 2-OP (2020 Model) Upgrade your workshop with this reliable and high-performance CNC machine from XYZ Machine Tools Ltd, a trusted name in precision engineering. Machine Specifications: Feature Spec / Capability Travel (X × Y × Z) ~ 355 mm × 305 mm × 455 mm Table size ~ 457 mm × 381 mm Max work load ~ 250 kg Spindle BT30 taper, 10,000 rpm, ~ 3 hp (≈ 2.2–2.3 kW) motor Tool changer 8-station automatic tool changer Rapid traverse ~ 15 m/min (X/Y/Z) Control ProtoTRAK TMX conversational CNC (menu-driven, with G-code compatibility), USB file transfer Accuracy / repeatability Positioning accuracy typically around ±0.005 mm (varies with condition), repeatability ±0.003 mm Footprint ~ 760 × 1,220 mm, ~ 2.5 m tall Machine weight ~ 1,100 kg • Year of Manufacture: 2020 • Rated Voltage: 400V Rsdpfx Asxd Dgyshvsbw • Full Load Current: 15A • Short Circuit Rating: 10kA • Phase: 3 • Cycle: 50Hz • Main Motor Power: 2.2 kW • Max Spindle Speed: 10,000 RPM • Pneumatics: 6 bar / 100 L/min • CE Certified _____ Practical machining use • High-speed drilling, tapping, and small-tool milling: The 10k rpm spindle makes it much better for smaller cutters (Ø3–10 mm) and aluminium machining compared to the older 6k rpm version. • Secondary ops & light milling: Great for “clean-up” cuts, bolt holes, chamfers, flat milling, and side ops after turning. • Batch work with multiple ops: The 8-station tool changer is limiting, but with smart tooling (spot, drill, tap, end mill, chamfer, face) you can cover a lot. • Compact footprint: It can be placed near lathes or VMCs to absorb “2-op” bottlenecks. Condition: • Excellent working order • Lightly used, well-maintained. Has only been used to make Aluminium and Nylon shop fittings. • Ready to go straight into production Why Choose the XYZ 2-OP? • Precision engineering and durability • High spindle speed and robust motor for versatile machining • Compact and efficient design • Backed by XYZ’s reputation for service and reliability Don’t miss this opportunity to own a top-quality XYZ 2-OP machine—perfect for workshops, tool rooms, and production facilities looking to boost their machining capabilities.

Condition: used, Year of construction: 2002, functionality: limited functionality, machine/vehicle number: 2123, FAMAR AP60, including one size part for tablets and one size part blister PVC-ALU, 10 cells, for capsules size “0” Redpfx Aov S Eurjhvebw Sold as seen

Condition: used, Year of construction: 1995, functionality: limited functionality, bar diameter (max.): 75 mm, cnc old machine spindle hole 75 mm Rsdpfx Ahjyv Uplevebw

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Built-in Becker compressor Rbjdpfjyur Nljx Ahvsw Weight: 2800kg 380V power supply Additional air supply: 6 bar Power consumption: 18kW Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm Rbjdpfxjxdmgvo Ahvew We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: good (used), Year of construction: 2015, operating hours: 250 h, functionality: fully functional, For Sale: Guideway Grinding Machine (Retrofitted from Metal Planing Machine) Rbodpfx Ahjxx Uudevew We offer a robust guideway grinding machine, which has been professionally converted from an original metal planing machine. The main advantage lies in its relatively compact footprint in relation to the workpiece capacity. Technical Specifications: • External dimensions (LxWxH): 4,800 x 2,500 x 2,000 mm • Required floor space: 4,800 x 3,500 x 2,700 mm (+ control cabinet, coolant tank, access) • Table size: 2,000 x 800 mm • Distance between columns: 1,000 mm • Travel paths (X/Y/Z): 2,000 / 1,000 / 600 mm Upgrades & Features: • New ball screw spindles and bearings • 2 new motors + 2 overhauled motors • 3 new frequency inverters • New Siemens SINUMERIK 802C baseline CNC system • Large grinding spindle: 2,840 rpm – refurbished + new motor • Small grinding spindle: 18,000 rpm – refurbished • Including control cabinet, coolant tank with pump, and separate, wall-mounted inverter for small spindle Inspection and trial run possible by appointment. Please contact us for more information.

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: 27042010, TICAB (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair of asphalt concrete surfaces. A portable asphalt recycling plant / recycler RA-800 from TICAB with its own engine and hydraulic drive produces 800 kg of high-quality asphalt mixture for every 20-30 minutes from asphalt scrap, milling, bitumen, crushed stone, sand. It also allows you to warm up the material and work with it within the area of laying or replacing asphalt. Equipment is ideal for emergency road repairs. Technical Specifications: ● Diesel engine with electric starter (10hp). ● Recycler productivity - 1800 - 2500 kg/hour. ● Drum capacity 800 kg (0,6 m3). ● Product heating temperature - 120 – 160 °C. ● Product heating time up to 15-20m (160°C). ● Fuel tank for 100 l (equipped with a fuel level indicator). Redsvrw Anjpfx Ahvjbw ● Power of burner 100-130 KW. ● Burner diesel powered by a generator with a voltage stabilization system. ● The recycler drum is equipped with a heating distribution system (on the whole surface). ● Side flaps construction provides light access to servicing drum rollers. ● Control panel with indicators and at least one 220V power outlet on this panel (can be used for charging tools or lighting). ● Control panel, power block equipped with locks protection