Used Stirrup Bending Machine for sale (64,423)

Year of construction: 1997, condition: ready for operation (used), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible. Gbedpfxjuwrv Ds Af Uji

Condition: new, functionality: fully functional, Year of construction: 2025, throat depth: 400 mm, warranty duration: 24 months, Model: GB-4016E Bending pressure (KN): 400 Bending length (mm): 1600 Distance between columns (mm): 1320 Maximum opening height (mm): 430 Slider stroke (mm): 180 Throat depth (mm): 400 X-axis stroke (mm): 400 X-axis speed (mm/s): 400 R-axis stroke (mm): 140 R-axis speed (mm/s): 200 Z-axis stroke (mm): 1040 Z-axis speed (mm/s): 400 Machine power (kw): 17.2 Gbedpfx Afewzqx Ho Uji Dimensions (mm): 2090*1265*2290 Weight (kg): 3500

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Godpfxewk Rlxo Af Ujbi Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR Gbodpfx Astrd T Tsf Usi

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, machine/vehicle number: 10659, roller (bottom) diameter: 300 mm, roller (top) diameter: 350 mm, working width: 3,000 mm, sheet thickness (max.): 25 mm, empty load weight: 24,000 kg, TECHNICAL DETAILS Godpfx Aeyua Ezsf Uobi Number of rollers: 4 pcs Max. sheet thickness: 25 mm Max. working width: 3,000 mm Upper roller diameter: 350 mm Lower roller diameter: 300 mm MACHINE DETAILS Control: Conventional Dimensions & Weight Dimensions (L x W x H): 6,300 x 2,000 x 1,800 mm Unladen weight: 24,000 kg Transport packages: 1 pc.

Condition: used, Year of construction: 1997, tube diameter / mm wall strength / mm bending radius min. / mm CNC wire bending machine ROBOMAC 206 General information Machine designation: ROBOMAC 206 Manufacturer: LATOUR / NUMALLIANCE (France) Machine type: CNC wire bending machine / wire forming machine Year of manufacture: 22 December 1997 Serial number / registration: 9711026 CE marking: present Weight Machine weight: approx. 4000 kg Working range Wire diameter: approx. 2 – 6 mm Material feed: wire from coil (ring) Bending heads: 2 bending heads Max. wire strength: approx. 600 N/mm² Mechanical data Feed length / feed arm: approx. 600 mm Tools: interchangeable tools for different wire diameters Control: automatic wire bending control Gsdpsyt R Sisfx Af Ujbi Machine dimensions (approx.) Machine depth: approx. 2000 mm Machine height: approx. 1720 mm Electrical power Electrical connection: approx. 6.3 kVA Typical areas of application - Wire bending parts - Wire hangers - Metal hooks - Springs - Technical wire moulded parts for industrial applications Disclaimer All information is provided without guarantee. No liability is assumed for the accuracy, completeness and up-to-dateness of the technical data.

Condition: excellent (used), Year of construction: 1992, Shaft diameter: 40 mm Bending capacity: Flat bar edgewise at 500 mm Ø: 60 x 10 mm Flat bar flatwise at 400 mm Ø: 100 x 15 mm Square bar at 500 mm Ø: 35 mm Angle iron, leg outwards at 450 mm Ø: 50 x 50 x 6 mm Angle iron, leg inwards at 600 mm Ø: 50 x 50 x 6 mm T-section, T outwards/inwards at 600 mm Ø: 60 x 60 x 7/50 x 50 x 6 mm Gbjdsx Anpvjpfx Af Uoi Round bar at 500 mm Ø: 35 mm Shaft speed: 7.5 rpm Electrical connection: 380 V, approx. 1.7 kW Space requirement: 910 x 640 x 1400 mm Weight: approx. 480 kg

Condition: good (used), functionality: fully functional, Year of construction: 1997, Used profile bending machine from Sahilner Gsdoytb Afspfx Af Uobi Model: PK 40 Shaft diameter: 40 mm 3 driven rolls Including various tools Year of manufacture: 1997

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 925307, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: roundo, number of rollers: 3, input current: 380 A, input frequency: 50 Hz, Equipment: CE marking, emergency stop, hardened rollers, Roundo R5S used condition , working 100% . Base in Thailand . Gsdpfx Aoyqxmvsf Uobi

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, control type: manual, Maximum bending length: 2000 mm Maximum sheet thickness: 1.5 mm Segmented upper bending edge. Manual adjustment of the bending angle up to the stop. Bending: manually operated Manually adjustable rear stop. Weight: 990 kg Gbedpsyr Rcfsfx Af Usi

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Max. bending diameter: Ø 76 mm Max. pipe wall thickness: 3.0 mm Max. bending length: 6000 mm Gedpfx Aoyr N Erjf Ujbi Min. bending angle: 0.1° Max. bending angle: 190° Max. bending radius: 260 mm Operating speed Rotation speed: 200°/second Bending speed: 30°/second Feed speed: max. 1000 mm/second Tolerances: Rotation (°): ±0.1° Bending (°): ±0.1° Feed (°): ±0.1° Hydraulic system: Hydraulic motor power: 7.5 kW Max. hydraulic pressure: 180 bar Hydraulic oil: 120 liters Rated power: 44 kW Voltage: 400 V AC Dimensions L x W x H: 8900 x 1200 x 1850 mm Weight: 4850 kg Description: Materials: Steel | Stainless steel | Aluminum | Brass | Copper and other flexible materials for simple to complex shapes Display: Portable 15-inch color touchscreen monitor Control panel: Servo and hydraulic motion control, plus selectable servo axis speed Foot pedal User-friendly AKYAPAK control software Hydraulic system: Bosch, Parker Operating modes: Manual, semi-automatic, and fully automatic Programming: Y-B-C or X-Y-Z mode Cooling system: Hydraulic oil cooler Pipe clamp: Hydraulic Industrial PC: Pentium processor, 256 MB RAM, hard drive, and floppy disk drive Lubrication system: Automatic Control: PLC-based Rotary axis: Servo-controlled Bending system: Hydraulic Auxiliary axes: Hydraulic Forward and reverse movement: Manual Pipe length calculation: Automatic, according to program Workpiece display: 3D 360° graphic display

Condition: used, 1 piece CNC wire bending machine ROBOMAC 206 with various accessories, as per photos and inspection. Colour: grey/red. Condition: used. Storage location: production hall / right side. Payment method: advance payment by bank transfer. Shipping: Collection only – shipping is not offered for this item! Godpsyr H Nhsfx Af Ujbi

Year of construction: 2001, condition: ready for operation (used), overall weight: 3,750 kg, total height: 1,600 mm, product length (max.): 4,700 mm, number of axes: 6, General Data Machine weight 3750 kg Measurements height 1600 mm Main Drive Number of axis 6 Bending length 3000 mm Dimensions Machine Length 4700 mm This 6-axis PEDRAZZOLI Bend Master 42 MRV IMS CNC was manufactured in 2001. It features a max tube diameter of 42 mm, a min tube diameter of 6 mm, and a max bending radius of 270 mm. With a power of 22 kW and a bending length up to 3000 mm, consider the opportunity to buy this PEDRAZZOLI Bend Master 42 MRV IMS CNC roll bending machine. Contact us for more information about this machine. Gjdpfxex Hbk Rj Af Usbi Application Types Bending

Year of construction: 2004, condition: used, functionality: fully functional, Machine for cutting and 2D bending of aluminium tubes with a wall thickness of 7 and 8 mm. Gbjdpjyt Sp Njfx Af Uji

Condition: good (used), Year of construction: 1999, overall weight: 2,900 kg, total length: 1,800 mm, total width: 1,900 mm, total height: 2,200 mm, Length:1800mm Width:1900mm Gbsdpfx Afoycu E Ej Uji Height:2200mm Weight:2900kg

Condition: excellent (used), Year of construction: 2013, controller manufacturer: ELFRAN Digital Read Out, number of rollers: 3, shaft diameter: 130 mm, overall weight: 5,800 kg, total length: 2,200 mm, total width: 2,400 mm, total height: 2,000 mm, Profile bending machine FACCIN - RCMI 130 MACH-ID 9451 Make: FACCIN Type: RCMI 130 Control: ELFRAN Digital Read Out Year: 2013 3 rolls driven 2 lateral guide rolls Digital readout for position rolls Set hardned universal rolls Set hardned profile rolls Horizontal and vertical:|Horizontal and Vertical Shaft Ø: 130mm Number of rolls: 3 Capacity flat: 240 x 30 x 1000mm Capacity Tube: 140 x 5 x 1500Ø x mm Capacity bar: 80 x 80 x 900mm Gsdpfx Afsyrq Dvj Usbi Capacity T-Profile: 140 x 15 x 1400mm Capacity HEA-Profile: 160 x 1700mm Working speed: 0 - 6000mm/min. Side supports: 2 x Hydraulic side arms Length: 2200mm Width: 2400mm Height: 2000mm Weight: 5800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Gjdpfxshmmfks Af Uebi Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: like new (used), functionality: fully functional, control type: manual, actuation type: hydraulic, roller (bottom) diameter: 255 mm, roller (top) diameter: 255 mm, roller diameter: 255 mm, roller length: 2,500 mm, sheet thickness (max.): 17 mm, power: 5.5 kW (7.48 HP), input voltage: 380 V, Dear Sir, We can offer you a ROUNDO (Sweden) electro-hydraulic plate roller Model: PS-255 Prebending capacity: 2500 x 8 mm Bending capacity (diameter 3 x top roll dia.): 2500 x 14 mm Gsdpsyt Hqnofx Af Uebi Bending capacity (diameter 5 x top roll dia.): 2500 x 15 mm Bending capacity (diameter 3–5 meter): 2500 x 17 mm Machine no.: 976504 Delivered: 04-1997 Dimensions: 4 x 1.18 x 1.4 m Net/Gross weight: 6200 / 6800 kg Diameter of all rolls: Ø 255 mm Motor power: 5.5 kW Hydraulic machine 3 driven rolls Including: Push button control Digital readout (DRO) Dutch manual Price of the ROUNDO hydraulic plate roller, model PS-255: on request by e-mail This offer remains valid as long as the machine is unsold. The machine has original paint and has seen very little use. Offer is valid subject to prior sale. You can find other machines on our website. We are happy to provide additional information or answer any questions. If you would like to inspect the machines, please schedule an appointment, as we are frequently visiting customers. Delivery terms: Delivery time: from stock Delivery: ex works Baarle-Nassau Payment: prior to collection Prices are net, excluding VAT. Machinehandel De Leeuw BV is one of the few companies in Europe specialising in stocking and selling mainly used Kardex Remstar automatic lift and rotary storage systems. We have been assembling and/or dismantling these systems safely with VCA-certified technicians for over 33 years. Best regards, Antoine de Leeuw Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Condition: used, Year of construction: 2011, Press capacity approx.: 360 kN Bending length approx.: 1020 mm Distance between side frames: 932 mm Effective open height: 295 mm Throat depth: 150 mm Working speed: 25 mm / sec feeding speed: 220 mm / sec Control: TASC 6000 Working hours machine: 41422 h working time jacking beam: 4713 h Length: 1805 mm Width: 1330 mm Height: 2380 mm Weight of machine approx.: 2600 mm Standard configuration Machine - Stable machine frame - Optimized in terms of deformation - Highly-dynamic electro-mechanical direct drive (torque motor) - Inductive linear measurement system with temperature compensation - Switch cabinet air-conditioning- Ergonomic Machine designBack Gauge System - Highly-dynamic safety backgauge system - Gauge fingerControl - Integrated Machine controller TASC 6000 - Numerical workshop programming - Windows XPe, Pentium M with 1.1 GHz clock frequency - 1 GB RAM memory - 15 " Touch screen Gbedpfx Afoyrf Dke Uji - Network capability - TeleserviceSafety - Safety doors, can be swung sideways - Rear cover - 2-button footswitch, for seated or standing operationOptions for ergonomy - Comfort supporting table (front)- Comfort foot rest - LED work area lighting, front - Operating unit, swivel-mounted - 1 shelf bracket and 2 document repositoriesOptions for productivity - BendGuard (with block laser) - Graphic workshop programming - Automatic tool clamps Extended machine accessories Extended Machine Accessoires Backgauge System - Backgauge system 6-axes Automation

Condition: good (used), Technical data: 2 hydraulically adjustable rollers 3 driven rollers Roller diameter: 225 mm Shaft diameter: 75 mm Round steel: diameter 50 mm Square steel: 45 x 45 mm Flat steel: 200 x 20 mm Angle steel: 75 x 15 mm Bending speed: 7 m/min Motor power: 4 kW Machine can work horizontally or vertically Dimensions (L x W x H): approx. 1200 x 1100 x 1200 mm Gbsdeytyf Sspfx Af Usi Weight: approx. 1.3 t Accessories: various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are appropriate for its age; used machines are sold without any warranty.

Year of construction: 1987, condition: ready for operation (used), A four-roll plate bending machine Kramer is available. Working width: 2000mm, max. plate thickness: 3mm, power: 3kW. An on-site inspection is possible. Godpfx Afjyttv Ro Uobi

Year of construction: 2017, condition: ready for operation (used), An asymmetrical three-roll plate bending machine MG is available. Working width: 2000mm, roller diameter: 130mm, max. plate thickness: 3mm, power: 6kW, weight: approx. 2000kg. An on-site inspection is possible. Gsdpsyttwbefx Af Uebi

Condition: excellent (used), Year of construction: 2008, Technical data: Working width: 3100 mm Bending capacity: 16.0 mm Pre-bending: 12.0 mm Top roll diameter: 310 mm Center roll diameter: 320 mm Side roll diameter: 240 mm Gbodpfeytr Rmsx Af Uji Conical bending device via tilting of both side rolls Hardened rolls Mobile control panel with digital display Motor power: 15 kW CE marking Dimensions (L x W x H): approx. 5100 x 2100 x 1800 mm Weight: approx. 12.5 t The seller is not liable for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 1997, functionality: fully functional, Equipment: documentation/manual, LiSEC, BSV-30/K + A1RL Autom. Frame Bending Machine BSV-45NK + Desiccant Filling Machine for Bent Spacer Frames Year: 1997. Processing of aluminum profiles. Bending tools included. Gjdoytrvvjpfx Af Uobi Connection: 3/N/PE-50 Hz, 400 V, (BSV-30/K = 5,5 kW + A1RL = 1,1 kW) In good technical condition. Inspection is possible by appointment. Available: NOW

Year of construction: 2026, condition: new, functionality: fully functional, Technical data: Working width: 2540 mm Maximum sheet thickness: 2.5 mm Maximum bending angle: 135° Length: 2880 mm Width: 1020 mm Height: 1450 mm Weight: 1300 kg Delivery to the customer is possible. The delivery cost is determined individually according to the quotation of the transport company. Gbodoytparspfx Af Uei If you are interested in other machines, we encourage you to visit our website.