Used Ctx 510 Ecoline for sale (2,071)

Condition: excellent (used), Year of construction: 2008, DMG CTX 510 Nwedpfxor Ak S Ne Ah Hsb Sinumerik 840D Machine in perfect condition, equipped with bar feeder and C axis Spindle operating hours: 6720 Spindle bore: 95 mm Collet chuck Forkardt D=100 mm max; I also have a brand new Hainbuch SK100 collet chuck for this machine Tool holder VDI 40

Condition: used, Year of construction: 2004, operating hours: 60,425 h, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Diameter of rotation: max. 465 mm Length of rotation: 1050 mm Diameter when turning: 680 mm Diameter of the chuck: 325 mm Travel x: 300 mm Travel z: 1050 mm Control: Fanuk Series 21I-TB Speed range: Max 3500 rpm Nodpfsv Epzvjx Ah Hjwb Drive power: 33 kW Torque: max. 630 Nm Diameter of the bearing in the spindle: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Pin stroke: 150 mm Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, DMG MORI Horizontal Turning Machine CTX -310V3 ecoline - Year 2010 Controller : MAPPS (Mitsubishi) Nwjdpfx Ahex Ty S Ts Hob Max swing dia.330mm Max swing over slide dia. 260mm Max. Turn dia. 200mm Length 450mm Chuck 8" Turret 12 (6 driven tools) C axis indexing Power driven Tools 4,500rpm Tool setter tail Stock Chip conveyor --- Video upon request

Condition: good (used), Year of construction: 2004, Gildemeister CTX 510, year of manufacture 2004, Siemens 840 D control with Shop Turn, travel range X/Z 300/1050 mm, 12-position turret, VDI 40, tailstock, coolant pressure 20 bar, spindle speed up to 3,500 rpm, three-jaw chuck Ø 315 mm, bar capacity 90 mm, quill travel 150 mm, 14,000 spindle hours, only small batch sizes of 0 - 5 produced on the machine, programming was carried out directly on the machine, no driven tools. Nwjdpsx Ux Tfjfx Ah Heb

Condition: excellent (used), Year of construction: 2013, operating hours: 30,000 h, functionality: fully functional, Control: Siemens 840 D Country of origin: EU – Poland Voltage: 400V Dimensions: 3082x2260x1775 mm (with chip pan), 4228x2260x1775 mm (with chip conveyor) Net machine weight: 3400 kg TECHNICAL DATA CTX 310 ecoline V1/V3 New Design Working range - Max. swing over bed: 330 mm - Max. swing over cross slide (X-axis): 260 mm - Max. turning diameter: Ø 200 mm - Chuck diameter: Ø 210 mm - X-axis travel: 182.5 mm - Z-axis travel: 455 mm - Centre height: 190 mm - Distance between centres: 581 mm Feed drives - Rapid traverse speed X/Z: 30 m/min - Control: Siemens Sinumerik 840D Slim Line - C-axis with Siemens control Nwedpfsxdiarjx Ah Heb - Speed: 0 – 100 rpm - Torque: 112 Nm - Accuracy: < 0.04° Spindle - Spindle nose: 140 h5 mm - Front bearing inner diameter: 100 mm - Spindle bore: Ø 74.3 mm - Max. bar capacity: 51 mm - Main drive with Siemens control - Drive power (40% / 100% DC): 16.5 / 11 kW - Torque (40% / 100% DC): 166.5 / 112 Nm - Max. spindle speed: 5000 rpm Turret - Number of tool stations: 12 - Tool holder: DIN69880 (VDI 3425) - Shank diameter: 30 mm - Tool change (with indexing lock): 0.95 s - Tool change (without indexing lock): 0.4 s - Turret with Siemens control - Number of driven tools: 12 - Drive power (40% DC) at 4000 rpm: 8.4 kW - Torque (40%): 20 Nm - Max. speed: 4500 rpm Tailstock - Automatic stroke: 396 mm - Quill type: flange-mounted - Max. quill axial force: 400 daN Hydraulic unit - Tank capacity: 50 l - Max. pressure: 50 bar Cooling system - Tank capacity: 175 l - Capacity with conveyor: 200 l - Pump power: 0.85 kW - Pump output at 5 bar: 30 l/min Electrical connection - Max. power: 21 kVA - Voltage: 400V - Frequency: 50–60 Hz - Fuses: 33 A Pneumatics - Compressed air connection: 6 bar

Condition: ready for operation (used), Year of construction: 2014, operating hours: 3,324 h, functionality: fully functional, turning diameter: 465 mm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,050 mm, rotational speed (max.): 3,250 rpm, TECHNICAL DETAILS Max. swing diameter: 680 mm Max. swing diameter over cross slide: 465 mm Max. turning diameter: 465 mm X-axis travel: 300 mm Z-axis travel: 1,050 mm CNC control: SIEMENS SINUMERIK 840D Main Spindle Spindle head: 220h5 mm Bar capacity: 76/90 mm Spindle diameter at front bearing: 140 mm Chuck sizes: 250 mm Drive power (40/100% DC): 33/22 kW (AC) Max. torque (40/100% DC): 630/420 Nm Max. speed: 3,250 rpm Tool Turret Number of tool stations: 12 Nedpfx Aoww E Ibsh Hjwb Driven tools: 6 Tool holder: VDI 40 Shank diameter: 40 mm Drive power (40% DC): 8.4 kW Max. torque: 20 Nm Max. speed driven tools: 4,000 rpm Tailstock Tailstock quill stroke: 850 mm Center taper: MK 4 Tailstock quill force: 1,200 daN Guides Ball screw X/Z axis (D x P): 40 x 10 mm MACHINE DETAILS Machine weight with chip conveyor: 8,100 kg Ergonomic control panel: SlimlinePanel Chip conveyor: hinged belt chip conveyor Coolant pressure: 5 bar High-performance coolant pump: 12 bar Connected load: 50 kVA Frequency: 50 Hz Operating hours: 14,828 h Spindle hours: 3,324 h EQUIPMENT - 12-position tool turret, VDI 40 mount - Hydraulic hollow clamping device - Sandvik tool kit - Chip conveyor - Self-centering, hydraulic steady rest SLU 3.1 - Mechanical oil mist separator type AFS 600 - Electric sliding door actuation - Tropical package for ambient temperatures up to 50°C

Condition: good (used), Year of construction: 2012, DMG CTX 510eco CNC lathe with C-axis and driven tools Year: 2012 CNC controller: SINUMERIK 810D with ShopTurn X-axis travel mm: 300 Z-axis travel mm: 1.050 Turning length mm: 1.050 Nwjdpfexqq Nbox Ah Heb Max. turning diameter mm: ø 465 Swing over bed mm: ø 680 Swing over cross-slide mm: 465 Bar work capacity mm: ø90 Turret head capacity .: 12 positions (6x driven) Speed ​​driven tools rpm: 4000 Main spindle Max Speed ​​spindle rpm: 3.250 Drive power spindle kW: 33/22 (40%/100% DC) Spindle bore mm: 102,5 Spindle nose: Flat flange (220h5) Maximun torque Nm: 420 (100% DC) Tailstock Tailstock travel mm: 850 Tailstock cone: MK5 Length x width x height, mm: 5300x2230x2010 Weight kg: 8100 Accessories/options: Foot switch for chuck open/close Driven tool holders Static tool holders Swarf conveyor Documentations Under power in our warehouse.

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Njdpfx Aevvkipsh Hjwb

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Nwodswhqprepfx Ah Hjb

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Nsdpfswhqplsx Ah Hswb

Condition: excellent (used), CATALOG NUMBER 7571 Technical specifications: - Roller width: 510 mm - Table length: 3040 mm - Noise reduction comb - Roller guard - Cast iron tables - Both tables adjustable - Original adjustable cast iron fence with angle setting - Motor: 3 kW - Extraction port diameter: 130 mm - Dimensions (L/W/H): 3040x850x1000 mm - Weight: 1032 kg ADVANTAGES – German-made – Possibility to mount profile knives – Long tables – Used jointer – Very good condition Net price: 8,900 PLN Net price: 2,120 EUR (based on exchange rate 4.2 EUR) (Prices may vary with significant fluctuations) Nwedpfov H Dugox Ah Heb

Condition: excellent (used), Faceplate diameter 510 mm KKG 8 Weight 111 kg Nwedofm Tquspfx Ah Hob

Condition: excellent (used), Faceplate diameter 510 mm Height 100 mm Diameter centering flange 90 mm Nwedpfxefm Tp Sj Ah Hob thread pitch 5,2 mm Weight 68 kg

Condition: refurbished (used), Year of construction: 2012, operating hours: 2,134 h, Hako Scrubmaster B45 TB 510 Refurbished scrubber-dryer with new batteries, new suction turbine, and more – includes 6 months warranty and new DGUV V3 electrical inspection with test certificate. Working width without suction bar: 51 cm Working width with suction bar: 86 cm Max. area performance: 2000 sqm/h Fresh water tank: 45 L Recovery tank: 45 L Drive type: Electric 24V Battery: 2 x 12V 85Ah GEL batteries Installed new parts / repairs carried out: - Suction motor 24V 400W new - 2 x 12V 85Ah GEL batteries new - Brush deck / brush motors overhauled including new ball bearings, carbon brushes, and bumper strip - All hoses new - Disc brushes new - Support wheels new - Squeegee blades new - Fresh water filter new Nwsdpfju Sr U Nex Ah Heb Additionally, we offer: Servicing, repair, and sales for all common Hako models.

Condition: refurbished (used), Year of construction: 2020, operating hours: 1,181 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, input voltage: 24 V, water tank capacity: 42 l, battery voltage: 24 V, battery capacity: 105 Ah, brushing unit diameter: 510 mm, operation weight: 230 kg, Hako Scrubmaster B45 CL TB 510 Refurbished scrubber-dryer with new batteries, new suction turbine, and more – includes 6 months warranty and a new DGUV V3 electrical inspection with test certificate. Working width without squeegee: 51 cm Working width with squeegee: 86 cm Max. area performance: 2,700 m²/h Fresh water tank: 45 L Recovery tank: 45 L Drive: Yes Drive type: Electric 24V Battery: 2 x 12V 105 Ah GEL batteries Installed new parts / performed repairs: - Suction motor 24V 400W (new) - 2 x 12V 105 Ah GEL batteries (new) - Brush deck / brush motors reconditioned incl. new ball bearings, carbon brushes, and bumper bar - All hoses replaced (new) - Disc brushes (new) - ACLA rubber wheels (new) - Squeegee rubbers (new) - Fresh water filter (new) Nedpfx Aeyanpfsh Hjwb In addition, we offer: Service, repair, and sales for all common Hako models.

Condition: good (used), Year of construction: 2004, spindle speed (min.): 3,500 rpm, travel distance Z-axis: 1,000 mm, Model Year: 2004 Chuck Diameter: 12" Number of Axes: 3 Length: 1000 mm Swing Over Bed: 350 mm Spindle Speed (RPM): 3500 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek Nsdpfx Ahox Nvr Ue Hswb

Condition: good (used), Year of construction: 2001, functionality: fully functional, spindle speed (min.): 3,500 rpm, travel distance Z-axis: 2,000 mm, rotational speed (min.): 4,500 rpm, feed length Z-axis: 500 mm, fuel type: electric, fuel: electricity, throat depth: 350 mm, Year of manufacture: 2001 Nedpfxsx Nvqdj Ah Howb Chuck diameter: 12" Number of axes: 2 Length: 1000 mm Neck diameter: 350 mm Spindle speed (rpm): 3500 Machinable material types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek.

Year of construction: 2022, condition: used, Number of sanding units 6 st. sanding width 45-165 mm Sanding height max. 45-92 mm weight 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer ----- Long text as PDF attachment! Brief description: The machine has automatic height detection for the pass-through. It has 2 sanding discs at the top and 2 sanding discs at the bottom, each connected to a brush unit. Technical manufacturer's description: Ecoline Q-Sand: the ideal sander for scantlings and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, Q-Sand guarantees maximum precision and uniformity. It is equipped with sanding discs, lamellar brushes, and a Nsdpfxexyafks Ah Hswb double disc for more effective material removal, which improves adhesion for subsequent treatments. Q-Sand can be installed in a line or, thanks to its complete operational autonomy, can also be used independently. It is also ideal for window frames, beams, and custom-made products, and optimizes processing times with automated systems and advanced production control. ----- Price of the above machine on request! ----- (Technical data according to manufacturer - without guarantee!) All prices quoted are net. Plus statutory VAT.

Year of construction: 2013, condition: used, machine/vehicle number: 6012, Etikettiergerät / Labeling machine EcoLine 100-XSR Baujahr / Year 2013 - Serial-No. 6012 Durchlassbreite / bandwidth 100mm Stoppgenauigkeit / stopping accuracy +/- 0.5mm Etikettenlänge / label length min. 10mm Etikettenbreite / label width min. 10mm Innen-Durchmesser Etikettenrolle / Inside diameter of label roll 40/76mm Aussen-Durchmesser Etikettenrolle / Outer diameter of label roll 300mm Netzspannung / Voltage 115/230V, 50/60Hz Leistungsaufnahme / power consumption 400 VA Zertifizierung / Certification CE IP-Schutz IP44 (optional IP54) Online-Video-Inspection by Skype-Video Nedpfslgz U Sjx Ah Howb We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, CTX Toastmaster Z55 conveyorised pizza oven stainless two level pizza oven on mobile frame, stainless mesh belt, 450mm wide belt, variable speed, adjustable temp control Nwodpfxedmn D Us Ah Hsb

Year of construction: 2006, condition: good (used), CNC FUSION 640 M, crs 1050 x 510 x 510 mm, table 1300 x 550 mm, spindle speed 12.000 rpm, magazine 30 tools CAT 40, spindle center coolant, chip conveyor. Nwedpfeiwkfzsx Ah Hob

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, spindle speed (min.): 25 rpm, spindle speed (max.): 500 rpm, spindle bore: 79 mm, travel distance X-axis: 220 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, chuck outer diameter: 200 mm, spindle nose: 170 h5, Equipment: documentation/manual, rotational speed infinitely variable, Machine is from first owner (government institution) and is very well equipped. This CTX 400 is set up at our premises and can be inspected in operation if required. This machine comes standard with: - Chip conveyor - IFM oil mist extraction system - TurnPlus control - Collet chuck for 185E and 3-jaw chuck KH 200/68 with top jaws - Conversion kit for collet 173E - Overload clutch for X and Z axes Nwodpfx Ahjydpdxs Hob - Double foot pedal (chuck + tailstock) - Original Gildemeister and Heidenhain documentation - Approx. 20 VDI-30 tool holders, of which 2 are driven

Condition: ready for operation (used), Year of construction: 2004, controller manufacturer: HEIDENHAIN, controller model: CNC Pilot 4290, number of axes: 3, This 3-axis Gildemeister CTX 520 linear was manufactured in 2004. It's a horizontal turning machine designed for precision and efficiency in metalworking. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 520 linear machine we have for sale. Contact us for more information. Additional equipment • Chip conveyor included • Forkardt lathe chuck Ø400 with several sets of jaws (approx. 100 sets) Machine Benefits Technical Machine Benefits • Rotation diameter: max. 680mm • Turning length: max. 1300mm • 21x driven tools (seven of which are angled) • Tailstock available Extra Information Machine is under power, it is functional and can be inspected. Njdpfx Ahjx D H E Ej Hswb

Condition: used, Year of construction: 1995, Gildemeister CTX-200 - CNC Lathe - Gildemeister/DMG CNC control system - 3-jaw chuck, Ø 140 mm - 12-position tool turret with driven tools - Work area lighting - Chip conveyor - 10,810 operating hours - Including various tools - Including operating manuals and documentation - Year of manufacture: 1995 Technical specifications Working area: - Swing diameter over bed cover: 440 mm - Swing diameter over cross slide cover: 210 mm - Cross travel: 160 mm - Longitudinal travel: 350 mm Nodpfxsxy R Uio Ah Howb Spindle: - Spindle nose diameter: 120 mm h5 - Spindle nose diameter at front bearing: 85 mm - Spindle bore: 56 mm - Chuck diameter: 140 mm Main drive: - Drive power (100/50% duty cycle): 7.5 / 11 kW - Max. torque: 58 / 84 Nm - Speed range: 25 - 5,000 rpm Feed system: - X-axis feed force: 200 daN - Z-axis feed force: 300 daN - X-axis rapid traverse: 12 m/min - Z-axis rapid traverse: 16 m/min - Measuring system: incremental rotary encoder Tool turret: - Universal disc turret, automatic indexing, directional logic - Number of tool stations: 12 - Tool holder shank (DIN 69880): 20 mm - Tool indexing time per station (30°): 0.48 s Universal disc turret with driven tools: - Number of tool stations: 12 - Max. number of driven tools: 12 - Max. clamping diameter for driven tools: 12 mm - Drive power (100/50% duty cycle): 2.5 / 3.0 kW Tailstock: - Quill diameter: 50 mm - Quill stroke: 120 mm - Quill taper: MT 3 - Max. quill pressure: 300 daN Machine dimensions: - Dimensions with chip conveyor (W x H x D): 3930 x 1690 x 1651 mm - Weight without chip conveyor: 2,950 kg Noise emission: - Constant workplace sound pressure level: 77 dBA

Condition: ready for operation (used), Year of construction: 2014, operating hours: 13,252 h, spindle speed (max.): 4,000 rpm, spindle motor power: 17,500 W, controller manufacturer: SIEMENS, controller model: 840D SL, number of axes: 2, This DMG CTX 450 V3 horizontal turning machine was manufactured in 2014. It features a Siemens 840D SL CNC control, a 12-position VDI 40 tool turret with driven tools, and a high-torque main spindle. The compact design includes side chip discharge and a heavy-duty hydraulic tailstock. Ideal for high-precision turning, it also has a bar machining capability with a maximum bar diameter of 65 mm. Contact us for more information about this machine. • Control: Siemens Sinumerik 840D SL with ShopTurn; Ergonomic SlimlinePanel; Ethernet and USB data transfer; graphical support; ProgressLine & PlanOnLight; electronic cycle-time and part-count display • Tool system: 12-position servo turret, VDI 40; 12 driven tool stations (DIN 5480 coupling); possibility to mount 6 BT toolholders on turret periphery • Measuring systems: Direct measuring systems on X and Z with air-purge protection • Spindle & workholding: Main spindle 17.5 kW / 370 Nm (40% ED), up to 4000 rpm; bar machining through spindle; max. bar diameter 65 mm; chuck with through-hole clamping mechanism • Tailstock: Heavy-duty hydraulic tailstock, programmable with two selectable feed speeds • Axes/guides: Linear guides on all axes, width 45 mm; rigid machine bed; high positioning accuracy • Footprint/chips: Compact footprint; chip discharge from the side • Lighting: Integrated LED work area lighting Nwedpfx Ajx E Eaash Heb • Coolant: High-pressure coolant pump 12 bar; manual coolant flushing gun 5 bar Additional equipment • Chip conveyor (included)