Used Brokk 40 for sale (57,345)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, empty load weight: 8,500 kg, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Pjdpfx Aew U Dt Nodnegw Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), For sale: a robust hydraulic press from the renowned manufacturer Vogel & Co Pressenfabrik Berlin-Borsigwalde. Pgsdpfx Adow Rc Hmjnjw Model: 40×250 Machine number: 1715 Maximum pressure: 40 tons Oil capacity: 150 liters The machine is in good technical condition, complete, and comes with a control panel. Sturdy, stable construction – ideal for industrial applications in pressing, forming, or assembly. Electric power supply, hydraulic drive. Mounted on a pallet for easy loading. Condition: used, fully operational, with normal signs of wear.

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter A very rare model on the market. Pgedpfxowmy Rij Adnew The machine is ready to work, in very good technical condition. After inspection. Suitable for die-cutting. Central lubrication. Format 40×57 cm Weight 3500 kg Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks.

Condition: excellent (used), Year of construction: 2001, For sale are operational and very well-maintained dual-fuel oil/gas burners of the brand Weishaupt RGL40/1-B (2550 kW), including gas valve Dungs DN 65, year of manufacture 2001, with control cabinet. Pgjdpfx Adewgk Rasnow

Condition: excellent (used), Year of construction: 2012, Meyn Deboner Type: D40 Deboner type: poultry thighs and drumsticks Performance: up to 2400 pieces per hour depending on application Dimensions: 1500x1300x2000 Weight: 500 kg Year : 2012 Pgsdsqwguyspfx Adnew We encourage a personal inspection, where you can assess the machine on-site, evaluate its performance, and confirm its high quality Preview Video

Condition: used, Year of construction: 2008, Cinch Mill 40 milling center ( L et W Machine Tools , Taiwan ) Year 2008 Fagor control X Y Z 1700x820x700 Spindle 6000 rpm Spindle taper BT40 Magazine 24 tools Pgodpjvwg Tmofx Adnew

Condition: excellent (used), Year of construction: 2008, GRASSAIR RLR 40 8B Screw Compressor Atlas Copco screw module Technical specifications: Capacity: 5.30 m³/min (5,300 L/min); Motor power: 30 kW; Max pressure: 8 bar; Operating hours: 12,847 h; Year: 2008; Compressor is fully operational. Net price: 12,200 PLN Gross price: 15,006 PLN Podpfow Niprjx Adnogw Link to video below.

Condition: excellent (used), For sale: SK40 holders, tool holders, milling heads, drill chucks, and cutting tools. Condition: used, in good technical condition. Offered brands: Haimer, Wohlhaupter, Schunk, Sandvik, Iscar, Garant, Fahrion, Gewefa, WTE, Kelch, WNT, Atorn, Bahmüller, Eroglu, Holex, LLambrich, Weldon, i-tec, Zurn Germany. Available: drill chucks, face milling heads, coolant-fed holders, and many more. 🛠️ Some with cutters, drills, turning tools. Price given per holder from photos 1-2, Haimer 60€/pc. Pgjdpfx Adew Hl Sxensw

Condition: used, various tool holders from , mazak, sandvik, mimatic, gerardi, ews, nikken and others. turning-milling tools with the VDI 40 holder Pgjdpsvry T Nsfx Adnsw only for sale per pallet pallet5 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc pallet 6 euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 7 euro 2640 total 3x driven tools vdi 40 euro 580/pc 10x tool holder vdi 40 euro 90/pc pallet 8 euro 2730 total 3x driven tools vdi 40 euro 580/pc 11x tool holder vdi 40 euro 90/pc

Condition: used, -KOM 3100- Offered here is a lot of VDI 40 tool holders. The lot consists of 12 items in total. Pgjdpfx Adswuq E Henjw Contents: - 1x VDI 40 tool holder + internal turning tool from 50 mm diameter - 1x VDI 40 tool holder + internal turning tool from 19 mm diameter - 1x VDI 40 tool holder + internal turning tool from 15 mm diameter - 1x VDI 40 tool holder + internal turning tool from 10 mm diameter - 1x VDI 40 tool holder + drill bit from 16 mm diameter - 1x VDI 40 tool holder + axial parting tool - 1x VDI 40 tool holder + rear turning tool from 47 mm diameter - 1x VDI 40 tool holder + rear turning tool from 40 mm diameter - 1x VDI 40 special tool holder - 2x VDI 40 tool holders - 1x VDI 40 plug

Condition: excellent (used), Weishaupt RGMS 40 dual fuel burner gas+heavy oil. 2600w Pjdpomnqbtofx Adnogw

Condition: excellent (used), 40 running meters pallet rack Stow Used, very good condition, see pictures height 4 m depth 100 cm beam length 2,70 m Load / compartment 3000 kg Frame blue Carrier orange Negotiable price: € 2.570,-- net ex stock Offer consists of: + 14 pcs. frames pre-assembled, 12t field load, depth 100 cm, height 4 m + 52 pcs. beams, length 2,7 m, 3000 kg payload/slot + 108 pcs. suspension locks + 56 pcs. concrete anchors Load plate Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. Pjdpoiwlpfofx Adnjgw (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: used, -KOM 3099- CNC lathe VDI 40 tool holder set A set of VDI 40 tool holders consisting of 10 pieces is offered here. Contents: - 1x VDI 40 holder + internal turning tool from 50 mm diameter - 1x VDI 40 holder + internal turning tool from 23 mm diameter - 1x VDI 40 holder + internal turning tool from 16 mm diameter - 1x VDI 40 holder + drill 38 mm diameter - 1x VDI 40 holder + back turning tool from 47 mm diameter - 1x VDI 40 holder + axial parting-off tool - 3x VDI 40 holder Pgsdowuq A Eopfx Adnew - 1x VDI 40 plug Weight: 30kg

Condition: like new (used), 40 running meters pallet rack Nedcon New goods, see pictures! A top racking system of the major manufacturer NEDCON- this is a subsidiary of Voestalpine AG with headquarters in Holland. Height 5,5 m Depth 110 cm, blue beam length 2,7 m orange girder with load /shelf 3050 kg Negotiable price: € 6.290,-- net ex stock Offer consists of: + 15 pcs. frames pre-assembled, depth 110 cm, height 5,5 m + 84 pcs. beams, length 2,7 m, 3050 kg payload/shelf +168 pcs. suspension locks + 30 pcs. Concrete anchor Load plates documents etc. are self-evident. Pjdpfxofkgpws Adnjgw Further accessories can be found in the accessories catalog. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Bay load 12 tons, higher bay loads available on request. Beams orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and assembly possible on request. Other composition on request. Over 2000 meters available. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Fast - flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: used, Year of construction: 1987, total height: 2,500 mm, total width: 2,000 mm, total length: 2,200 mm, Empty weight: 4.500 kg Price: On request - Year: 1987 - Documentation available: No - CE certificate present: No - Serial number: 23300448 - Drive system: Conventional - Power [kW]: 11.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 450 Pgedpfxow Duc Us Adnew - Z-axis travel [mm]: 400 - Table length [mm]: 1450 - Table width [mm]: 400 - Tool holder: ISO50 - Min. spindle speed [rpm]: 8 - Max. spindle speed [rpm]: 2000 - Options: Digital readout - └ Type of digital readout: Mitutoyo - Transport dimensions: 2200mm x 2000mm x 2500mm (l x w x h) - Transport weight [kg]: 4500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2005, operating hours: 60,000 h, condition: ready for operation (used), Main Drive Number of axis 4 Additional Equipment Hydraulic clamping Psdpfexy Ti Nex Adnsgw Easy Form angle measuring system No tools required This 4-axis LVD PPEB 220/40 press brake was manufactured in 2005. It features hydraulic clamping and the Easy Form angle measuring system for enhanced precision. Ideal for those looking to enhance their metal forming capabilities. Contact us for more information about this machine. Application Types Bending

Year of construction: 2006, condition: excellent (used), Description to follow! Pgjdpfoxy S Ecjx Adnow

Condition: good (used), Year of construction: 2018, Used machine UNO 20/40 Machine type: Tool presetting device Model: UNO20/40 Manufacturer: Haimer Year of manufacture: 2018 Location: Germany Including documentation as far as available Pgedpfx Ajxyt S Rjdnew

Condition: used, 40' High Cube Insulated Container equipped with a 3.5 kW single-split air conditioning unit, with adjustable temperature range from +16 to +30 °C. CONDITION ON DELIVERY: • Wind and watertight • Interior made of stainless steel and aluminium, food-grade suitable • Floor: T-profile ----- DIMENSIONS: External: • Length: 12,192 mm Podpfx Aoxz Ehgsdnjgw • Width: 2,438 mm • Height: 2,896 mm Internal: • Length: 11,599 mm • Width: 2,290 mm • Height: 2,545 mm ----- ADDITIONAL OPTIONS (ON REQUEST): • Complete LED lighting installation kit • PVC strip curtains (sliding/fixed) • Installation of a deep-freeze side door • Installation of an aluminium flat floor • Custom shortening to desired dimensions • Access ramp (solid steel construction) • Further individual conversions upon request ----- TRANSPORT: We deliver throughout Germany – by standard truck or crane vehicle. Contact us for a customized transport quote! ----- Feel free to contact us – we offer personalised advice! BIMICON Container Service – Your specialist from Hamburg. Since 1996, your partner for refrigerated and sea containers in Germany and worldwide.

Condition: ready for operation (used), Year of construction: 1996, Used Comafer 50/40 briquetting press. The briquetting press has undergone a complete overhaul. Podpfx Adexzu Rdjnjgw

Condition: excellent (used), functionality: fully functional, CURVAPROFILI GAIANI DIAMETER 40 Psdsxzgnnjpfx Adnjgw 3 ROLLERS HORIZONTAL USED MACHINE INTERNAL CODE: SVR 370

Condition: excellent (used), Year of construction: 1991, A very well-preserved milling machine, make: TOS KURIM, model: FGS 32/40, machine no.: 23304040, equipped with digital readout and milling cutters. Pgodpoxzdnxsfx Adnew Table clamping area: 320x1400 mm Longitudinal table travel: 1000 mm Transverse travel of milling head: 400 mm Vertical table travel: 450 mm Table taper: ISO 50 Spindle diameter at front bearing: 100 mm Maximum spindle torque: 1500 Nm With vertical milling head Video available on request Weight: 4400 kg

Condition: used, BAZ Mori Seiki NV 5000A/40 is available for sale. Psdpfexywwwsx Adnjgw The machine can be inspected under power at any time.

Year of construction: 1989, condition: excellent (used), Article number: MA1060 Manufacturer: Fasti Type: 509/40/6 Year of construction: 1989 Psdpjd Ac D Rsfx Adnogw Machine number: 5888 Control: Omron was renewed in 2012 Length [mm]: 4850 Width [mm]: 2450 Height [mm]: 2100 Weight [kg]: 10900 Power supply: 380V / 16.5 KW Working range [mm]: 4000 Maximum sheet thickness [mm]: 6 Blade length: 4000 Length stop: front 5000 mm / rear gauge 1000 mm Accessories: manuals / schematics

Condition: new, sheet thickness: 40bending length: 3100upper roll diameter: 460 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered Pgodpfxod Ab Rfs Adnjw - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- - oil coiler STD - center support EURO 18.750,-- - side supports EURO 15.000,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!