Used Lh 54 for sale (3,878)

Condition: used, Year of construction: 2000, table length 1160 mm table width 710 mm daylight 650 mm Control WENZEL ME 5007 total power requirement kW weight of the machine ca. 800 kg dimensions of the machine ca. m Ljdpfxot Hw S Ie Aiisrn 3-D-coordinate measuring machine with METROLOG II-Software

Condition: used, Year of construction: 2003, Coordinate Measuring Machine Wenzel LH 54 (Year of Manufacture 2003) in well-maintained and fully functional condition. The machine is built on a stable granite structure combined with air-bearing guides. This allows the portal and axes to move almost frictionlessly and smoothly over the granite—a proven foundation for high measurement accuracy and repeatability. The LH 54 is designed for reliable use in quality assurance as well as in series production and delivers consistent measurement results even during continuous operation. Before delivery, the machine is inspected and test-run by our service technicians in Remscheid, ensuring full functionality. The system is currently powered on and can be viewed and demonstrated at any time. PC System (modernized): After purchase, a completely new PC system will be installed, meeting WENZEL’s current requirements. This system is fully up to date and thoroughly tested before the machine is finally handed over to the buyer. Optional Services (upon agreement): - Installation and commissioning of the measuring machine within NRW - Issuance of a factory calibration certificate - Determination of length measurement uncertainty - Determination of probing uncertainty - Determination of repeatability range - Execution in accordance with DIN EN ISO 10360-2:2010-06 - Maximum measuring volume diagonal: 4,660 mm - Determination of probing uncertainty according to DIN EN ISO 10360-5:2020-11 - Including full documentation - DAkkS calibration by the accredited Klostermann calibration laboratory - Accreditation number: D-K-17518-01-00 - Accredited according to DIN EN ISO/IEC 17025:2018 - Training for the WM | Quartis measuring software - Custom programming for your components Additional Information: On request, the machine can be retrofitted with the proven Renishaw SP25M probe. The retrofit includes additional service work and complementary hardware components, which will adjust the purchase price accordingly. Lodpfxjy Dcive Aiiorn Additional software modules, custom adaptations, as well as individual accessories and clamping systems are available on request—optimally tailored to your specific measurement requirements. Measuring range X: 500 mm Measuring range Y: 1.000 mm Measuring range Z: 400 mm Measurement uncertainty: Eo = 2,5 + L/300 [μm] Installed software: WM | Quartis R2026-1 Controller: WPC2040 Basic PC System: Windows 11 (current configuration) Probing system: TP20 Probe head: PH10T Probe module: 1 × TP20 Standard Force Module head interface: PHC10-3 PLUS Probe interface: PI200 (Combi) Joystick: HT400 Exchange bridge: MCR20 (empty) Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck Included transport frame: On loan

Condition: ready for operation (used), Year of construction: 2003, travel distance X-axis: 500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 400 mm, number of axes: 5, This 5-axis Wenzel LH 54 CMM machine was manufactured in 2003. It features a measuring range of 500 mm in the X-axis, 1000 mm in the Y-axis, and 400 mm in the Z-axis. The machine includes a granite structure base, air bearing guideways, and a portal design, making it suitable for quality assurance and series production applications. If you are looking to get high-quality measurement capabilities, consider the Wenzel LH 54 CMM machine we have for sale. Contact us for further details. Ljdpfx Aeyxqfusiiorn • Condition: completely checked and retrofitted; new software • Machine design: granite structure base; air bearing guideways; portal design • Applications: quality assurance; series production • Availability: currently powered and available for demonstration • Calibration/verification: factory calibration certificate available; determination of length measurement uncertainty, probing uncertainty, and repeatability range • Measuring range: maximum space diagonal 4660 mm • Measurement uncertainty: E0 = 2.5 + L/300 µm • Controls and software: controller WPC2040 Basic; installed software WM Quartis R2026-1 • Probe system: TP20; probe head PH10T; probe head interface PHC10-3 PLUS; probe interface PI200 Combi; joystick HT400 • Options and services: measurement program creation for customer parts available; optional upgrade with Renishaw SP25M probe system (additional hardware and service included with upgrade); additional software modules on request; custom accessories and fixturing systems available Additional equipment • PC system with Windows 11 (compliant with current Wenzel requirements) and WM Quartis R2026-1 installed • 2 × 24" TFT monitors (new) • Mouse and keyboard • Probe change rack MCR20 (unpopulated/empty) • 1 × TP20 Standard Force Module • Stylus kit M2

Condition: ready for operation (used), Year of construction: 2001, Travel X/Y/Z: 500mm/600mm/400mm, max. length measurement error: 2.9 + L/350, max. single-point error: 2.9, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Ledpfxsw H Auqs Aiisrn

Condition: like new (used), This type of machine is suitable for dispensing the following products: mustards, baby food, sauces, pastes, jams, etc. With their filling device, these machines are equipped for dispensing viscous products. Ledszbi Ewspfx Aiijrn The output varies depending on the product, format, and filling capacity. Features: Spindle feed.

Condition: used, Year of construction: 2025, machine/vehicle number: LH202501080228, Weight 560 kg, output 8.7 kW; NOTE: The wheel loader is located at a construction yard on Wankelstraße, 41352 Korschenbroich, Germany! Lsdpfsy Rvqasx Aiiern

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Format: 540x720mm The machine is ready for die-cutting. Lsdpszgc Ubefx Aiisrn Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: ready for operation (used), LH SOGEV / LEYBOLD-HERAEUS Membranovac 1VS pressure gauge, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Lredpfx Aisi Ebykoisn

Condition: used, mileage: 454,000 km, power: 324 kW (440.52 HP), first registration: 10/2012, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Year of construction: 2012, Equipment: ABS, air conditioning, crane, MERCEDES ACTROS 2544 HOOKSYSTEM + CRANE Imported / Accident-FREE IN GOOD CONDITION! Lodpfx Asv Shq Njiisrn ? YEAR OF PRODUCTION: 2012 ? MILAGE: 454 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL. MIRRORS ? AIRCONDITION ? ENGINE BRAKE ? POWER STEERING ? TACHOGRAPH CAPACITY: 12 000 kg TOTAL WEIGHT: 26 000kg WHEELBASE: 480/135 cm TIRE SIZE: 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR CRANE: LHO L190Z (78) TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 88597

Condition: used, Year of construction: 2001, machine/vehicle number: 20010329, Offer 17500 Technical data approx.: - Nominal power approx. 100 kVA - Projection approx. 350 mm - Arm distance approx. 200 mm - Arm diameter approx. 50 mm - Double stroke cylinder type X - Z force at 10 bar approx. 2400 daN Lsdsv Eak Iopfx Aiijrn - Working stroke approx. 20 mm - Arm distance approx. 200 mm - Separate control cabinet HARMS + WENDE - Total weight approx. 250 kg

Condition: used, Centrifugal fan, dust extractor, fan, exhaust, dust fan, welding fume extractor -Motor power: 0.65 kW -Speed: 2840 rpm Lsdpfecuauyjx Aiisrn -max. volume flow: 0.41 m³/h -max. pressure: 804 kp/m² -Connection input: Ø 65 mm -Connection output: Ø 62 mm -Impeller: Ø - mm -Connection: 400 volts -Dimensions: 580/540/H450 mm -Weight: 30 kg

Condition: used, Manufacturer: EuroProjet - Studio 54 Lrjdex R Dhtspfx Aiijn Model : Armadio Oasis 1400 Type : Refrigerated cabinet Material: 304 stainless steel Capacity : 1315 L Working temperature: +2°/+8°C Digital temperature control Inside dimensions : W 54 x H 150 x D 70 cm Outside dimensions : W 145 x H 205 x D 85 cm Weight: 300 kg

Condition: used, functionality: fully functional, machine/vehicle number: 6412185, Year of construction: 2016, operating hours: 1,547 h, load capacity: 2,000 kg, fuel type: electric, construction height: 1,300 mm, fork length: 1,150 mm, drive type: Elektro, Low lift truck Chassis number: 6412185 Condition: Ready for use and fully functional Technical condition: good Description: BT LWE 200 No.: R0513 Year of manufacture: 2016 Operating hours: 1,547 Devices are sold without UVV and in their current condition! Charger on request. Fast and uncomplicated transport possible by arrangement! The advertisement is only for identifying the device! A precise description of the condition and possible equipment is provided individually on request! Errors and prior sale reserved, sale only to traders.. all sales of used goods are made without warranty and/or guarantee. If you have not found your forklift, contact us. We have a large selection of other devices on site. Initial lift, Lodpfx Aievthuqoiern Initial lift

Condition: used, functionality: fully functional, machine/vehicle number: W40155B01081, Year of construction: 2011, operating hours: 2,154 h, load capacity: 2,000 kg, fuel type: electric, construction height: 1,350 mm, fork length: 1,200 mm, drive type: Elektro, Low lift truck Fahrgestellnummer: W40155B01081 Condition: Ready for use and fully functional Technical condition: good Ljdpouhxw Hofx Aiijrn Description: Still EXU 20 No.: M0570 Year of construction: 2011 Operating hours: 2,154 The device is visually and technically in good condition. Subject to errors and prior sale. If you have not found the stacker you are looking for, please contact us. We have a large selection of other trucks on site. Initial lift,

Condition: good (used), geared motor, electric motor -Speed: 54 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 65 -Brake: -Number: 2x geared motors available -Price: per piece -Dimensions: 580/260/H200 mm Lrsdpfsci N Hbox Aiijn -Weight: 40 kg

Year of construction: 2023, condition: new, New Refrigeration Dryer Year of Manufacture: 2023 User-friendly operation concept Efficient design for cost-effective and safe operation Cooling fan with 0 - 100% variable speed control, eliminating the need for the usual pressure switch and thermostat for fan control Fewer wear parts with a consistently stable pressure dew point Control panel displays five different alarm statuses and retains them in memory Refrigeration compressor switches off below 15°C ambient temperature when no compressed air is flowing through Clear layout and easy access to all serviceable components Equipped with an integrated automatic condensate drain Key Advantages at a Glance • High efficiency • Excellent price-performance ratio • No unnecessary compressed air losses thanks to integrated electronic condensate drain • Connected tools and machinery are optimally protected • User-friendly operation concept TECHNICAL DATA General Information Airflow rate: 900 l/min Airflow rate: 54 m³/h Maximum pressure: 16 bar Air connection: ½" Power consumption: 0.18 kW Dimensions and Weights Length (approx.): 325 mm Width/Depth (approx.): 430 mm Height (approx.): 445 mm Net weight (approx.): 24 kg Lrodpfow I U H Tex Aiien Availability: short term Location: Hochheim

Condition: good (used), machine/vehicle number: 3102, Year of construction: 2005, load capacity: 42,000 kg, lifting height: 6,610 mm, mast type: duplex, fork carriage width: 300 mm, fork length: 2,400 mm, total length: 8,500 mm, total width: 4,150 mm, operation weight: 57,000 kg, additional equipment features: Weight indicator, Equipment: lighting, SveTruck 42120-54 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Lrodpfx Aioyuh Nzoien Wheel size – Drive wheel: 18.00-25 Wheel size – Steering wheel: 18.00-25

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 14008455, Fehlmann Picomax 54 model with Heidenhain TNC 320 control, in very good condition. Technical specifications: - Year of manufacture: 2008 - Travel in X, Y, and Z axes: 500/260/480 mm Lrjdjzgwiyspfx Aiien - Travel of the drilling spindle: 160 mm - Table dimensions (L x W): 880 x 320 mm - Maximum table load: 250 kg - Distance from table to spindle nose: 0 - 605 mm - Feed rate in X/Y: 1 - 2000 mm/min - Feed rate in Z: 1 - 1200 mm/min - Rapid tool change system: SF 32 - Spindle speed range, infinitely variable: 7100 rpm - Machine dimensions (W x D x H): 1850 x 2550 x 2400 mm - Weight: 2150 kg Accessories: - Heidenhain TNC 320 control - 4th axis with tailstock and Rohm 140mm 3-jaw chuck - Various holders - Microscope - Heidenhain probe - Machine lamp - Cooling system

Condition: used, Year of construction: 2014, operating hours: 4,848 h, Liebherr Engine D934 A7 – 140 kW (EPA) Weight: 43 tons Undercarriage EW - Width: 3,800 mm - Track gauge: 4,500 mm - Track pads, triple grouser, 600 mm, D6C, 56 links Lodeyffm Sepfx Aiijrn - Two-piece track guide Industrial monoblock boom, straight, Z1, 9.10 m Industrial stick, tip slightly angled, 7.50 m Hoist cylinder damping Active lowering of hoist cylinder Rod protection for piston rods, energy recovery cylinder Auto-lift Engine automatic shutdown Travel alarm, acoustic, non-deactivatable Proportional control (left): medium pressure circuit Joystick hand rest (raised) Roof window wiper Hydraulic cab elevation LHC 255 (from 3.24 m continuously adjustable up to 5.25 m) Narrow platform for LHC 255 Comfort radio Comfort driver's seat Cab floor window with armored glass Rear area surveillance with camera Work lights cabin front, 2 units, LED 1300 lumens Work lights cabin rear, 2 units, LED 1300 lumens Rotating warning beacon on cab, 1 unit Bypass filter, Liebherr

Condition: used, Year of construction: 1999, machine/vehicle number: 73240904, functionality: limited functionality, power: 1.95 kW (2.65 HP), input voltage: 400 V, input frequency: 50 Hz, actuation type: electric, rotational speed (max.): 802 rpm, rotational speed (min.): 88 rpm, total length: 3,430 mm, Scheppach bandsaw with saw blade. Good condition. Band length 3430mm. Band width 6-25mm. CE certified. Lsdpezggk Hjfx Aiiern

Year of construction: 2000, condition: used, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control WENZEL WPC 2040/FW31.351 total power requirement kW weight of the machine ca. 5500 kg dimensions of the machine ca. m Coordinate measuring m/c, software QUARTIS R12/16, Renishaw PH10Mplus Ledpfx Aiet Hw Nyeijrn

Condition: used, power: 155 kW (210.74 HP), fuel type: diesel, color: yellow, mast type: duplex, Year of construction: 2018, operating hours: 11,999 h, Year of manufacture: 2018 Intended use: Construction Drive type: Wheeled Number of cylinders: 4 GVWR: 46,000 kg Superstructure brand: LIEBHERR LH 50 LITRONIC CE marking: Yes LIEBHERR LH 50 M LITRONIC MATERIAL HANDLER YEAR 2018 TOTAL WEIGHT 46,000 KG REACH 20.0M CE-MARKED MACHINE ENGINE D934 A7-04 POWER 155 KW / 210 HP WHEELBASE CM GROUND CLEARANCE CM Lrjdpfx Aoy T Rdgeiisn WIDTH OF UNDERCARRIAGE CM 4-POINT OUTRIGGERS HYDRAULICALLY RAISABLE CABIN 3RD AND 4TH HYDRAULIC LINE INDUSTRIAL STRAIGHT MONOBOOM Z INDUSTRIAL STICK, STICK END WITH ANGLE 5-TINE GRAB MULTI-TINE GRAB CAPACITY 1.10 - 1.70 M3 CRANE IS READY FOR WORK WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: excellent (used), HEIDENHAIN TNC-310 Working travels 500x260x480 mm (+ spindle stroke 160 mm) Lrsdpfxsfrbtdj Aiion cross table 880x320mm additional with Manual hand wheels Spindle speeds 100-9000 Rpm Misc accessories MARCELS MASCHINEN CH

Condition: new, Thread rolling dies for various rolling machines, including UPW, UPWS, P10, P60, and ORT, with bores of 28 mm, 54 mm, 63 mm, 69 mm, 85 mm, 80 mm, 100 mm, and 110 mm. The dies can be ground to the desired thread profile. A list of available dies can be found in the image gallery. Price in EUR per set (2 pieces). Lredszfybcspfx Aiijn

Condition: used, offer consists of: Horizon MKU-54 mobile knife unit - installation: height automatically adjustable - usage: online and offline workable - sheet size: max. 540x360mm; min. 160x100mm; - infeed height: 570-970mm - capacity: 20.000 Takte; 230m/min - power: 230V / 50Hz - 0,7kW - dimensions: 1.060x750x1.300mm Lodpfxjx T Aymj Aiiorn - weight: 280kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs