Used Paul Kme 2 for sale (46)

Condition: refurbished (used), hydraulic feed drive unit, fully reconditioned, stepless variable; 1 unit for KME 2 or BM - right execution - without additional pump - type 56-009 Bwsdpfx Abeirmulebeh

Condition: new, new spacer rings of different thickness for PAUL KME 2 and BM, with bore 75 mm, new carbide tipped saw blades 300 Ø and 380 Ø x 75 Ø, new CV saw blades hard-chrome plated different Ø Bwedpjh Anyfsfx Abbsh

Condition: good (used), Original spacer rings PAUL in various widths for edging saw KME 2 or BM, outside-Ø 120 mm, bore-Ø 75 mm, with 2 keyways Bodpoiimz Ajfx Abbjwh

Condition: good (used), Year of construction: 1987, functionality: fully functional, Besaumer Paul Kme 2/750 Left, fully hydraulic, 22 kW, with electrical system Bsdpfx Aexq Hlrjbbewh

Condition: reconditioned (used), functionality: fully functional, cutting height (max.): 125 mm, • 750 mm passage width • 125 mm cutting height • 18.5 kW saw motor • Mechanical quick width adjustment • Saw shaft newly mounted • 1 fixed bushing • 1 adjustable bushing • 50 mm saw shaft • Manual upper roller height adjustment • 2 used saw blades • Stepless feed speed 0–50 m/min Bwsdpfowt N N Uox Abbjh • Machine workshop inspected

Condition: reconditioned (used), functionality: fully functional, cutting height (max.): 125 mm, • 125 mm cutting height • 750 mm passage width • Saw shaft newly fitted with bearings • 18.5 kW drive motor • 1 fixed bushing • 1 slatted bushing, approx. 300 mm usable clamping length Bwodjw Slwkjpfx Abbjh • 1 adjustable bushing • 50 mm saw shaft diameter • Mechanical height adjustment of upper rollers • Vibratory chute in the machine • 10 curved saw blades • 0 – 50 m/min stepless feed speed • Machine workshop inspected • Machine newly painted • Approx. 5 m long roller table in front of the saw • Approx. 4 m long roller table after the saw

Condition: excellent (used), Year of construction: 1995, For sale: Paul KME 2/750R edger, 30 kW power Bwjdpfx Abjygnq Neboh

Condition: refurbished (used), Year of construction: 2015, operating hours: 2,500 h, We are selling a Paul KME2 1000 R edger. The machine has worked for 3 years in single-shift operation, shows signs of use, is mechanically sound, and has passed a technical inspection by the company. 1000 mm cutting width, 120 mm cutting height, control from the operator panel. Bwjdpfx Abjv N Rv Asboh

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press Bwsdpjtrpiisfx Abbsh No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 8293250, Multirip Saw PAUL K 4 G/1200 - Model: K4G/1200, - Year of manufacture: 1982, Bwjdeyfh I Sepfx Abbsh - Machine number: 8293250, - Working width: 1200 mm, - Variable feed speed: 2–48 m/min, - Max. saw blade diameter: 270 mm, - Installed power: 33 kW, - Machine in operation. Good condition. Additional shaft included.

Year of construction: 2003, condition: used, Paul AB 920 feed table Bwedpfx Aeiauhzobbeh

Condition: good (used), Year of construction: 1994, The feed hydraulic pump is missing. Otherwise, the machine is operational. Bwodpfx Absxn Ukkebjh

Condition: excellent (used), Edging line edger with optimization PAUL AB920 - in a warehouse - German production - DTR - optimization of the cutting width - cross cut saw - automatic disc spacing TECHNICAL PARAMETERS: - max. workpiece width 920 mm - max. workpiece height 90 mm - max. workpiece length 6000 mm - main engine power 37 kW - disc diameter max. 300 mm - spindle diameter 60 mm - sleeve diameter 70 mm - fixed sleeve 60 mm long - floating sleeve for 1 disc Bwedpfx Abeia Nypsbjh - floating sleeve with a spindle 100 mm long - number of measuring heads 15 - spacing of measuring heads 350 mm - distance between the measuring heads - total feeder power 10 kW - cross-cut saw for cutting the material to a length of 2630 mm - saw leveling the material - cascade for transporting the board - hydraulic feed with smooth speed regulation - hydraulic material pressure - hydraulic material height adjustment

Condition: like new (used), Year of construction: 2021, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 5800, Satellite blasting system for cleaning with nutshell granules (our application: capacitor coils). Bwjdevnrymjpfx Abboh Other blasting media available

Year of construction: 1993, condition: used, - working width (mm): 2200 - engine power (kW): 22 - top rollers: with PU rings - bottom rollers: knurled Bsdpfx Abjn I Twyobowh - Saw shaft: included

Condition: excellent (used), Circular saw flat motor KATT 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second stub shaft for hydraulic pump drive with pulley 150 mm Ø, tested and with new bearings. Bwedpfxjh D Rt Ao Abbsh

Year of construction: 2014, condition: good (used), 700bar Bodskytdgopfx Abbswh 400V 32A 7,5kW

Year of construction: 2006, condition: ready for operation (used), Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible. Bwedet Amc Iepfx Abbeh

Condition: ready for operation (used), Year of construction: 2003, operating hours: 601 h, functionality: fully functional, machine/vehicle number: C/70001, workpiece height (max.): 42 mm, edge thickness (max.): 3 mm, product length (min.): 160 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Workpiece height: 8 - 42 mm Workpiece width: min. 70 mm Workpiece length (strip edges): min. 160 mm Workpiece length (endless roll): min. 60 mm Workpiece length (with double end-cutting device): min. 150 mm Edge parameters Edge thickness: max. 3 mm Edging thickness: 0.2 - 12 mm Working height and speed Working height: 800 mm Feed speed: 12 m/min Adhesive application Adhesive application: via application roller Process: Hot melt adhesive, hot-cold process, single-sided, right-hand design Heating time of adhesive tank: 8 min MACHINE DETAILS Total connected load: 12.5 kW Total weight: 2,100 kg Total length: 5,300 mm Total width: 900 mm Total height: 1,300 mm Operating voltage: 400 V, 50 Hz Input current: 400 A Compressed air connection: 6 bar Air connection: 6 bar, 1/4" Extraction connection: 1 x central extraction nozzle, diameter: 160 mm UNITS - Jointing unit with 2 HF motors, 1.5 kW each, 12,000 rpm, automatically controlled, including DIA MAX DIA jointing set Ø 85 x 30 x 42 mm, 3 teeth (LEUCO system), for panel thicknesses up to 42 mm - Double cross-cutting unit with 2 HF motors, 0.3 kW each, 12,000 rpm, 2 automatic positions (0° / 3°), 2 carbide saw blades Ø 140 x 3.2 x 16 mm Z 36 - Flush trimming machine with 2 HF motors, 0.43 kW each, 12,000 rpm, for solid and plastic edges, single-sided scanning, 2 carbide insert heads Ø 70 x 20 x 16 mm, Z 4 - Fine trimming machine with 2 HF motors, 0.3 kW each, 12,000 rpm, double-sided scanning, quick-change device, 2 AT 73 carbide rounding cutter heads Ø 73 x 16 x 16 mm, Z 3, profile knives R2 – R5 - Scraper with double-sided scanning, automatic control, for PVC and plastic edges - Corner rounding machine with 2 motors, 0.35 kW each, 12,000 rpm, 200 Hz, double-sided scanning, 1 work spindle each top/bottom AR 73 radius cutter heads Ø 73 x 16 x 16 mm, 3 teeth, profile cutters R2 – R5 EQUIPMENT Bwsdpfx Aewlquvobboh - Double-roll top pressure with electronic positioning - Single feed for strip and solid edges - Automatic roll magazine for rolls up to 800 mm in diameter, with pneumatic cutting device up to 3 mm thick - Rapid heating tank for hot melt adhesive granules, with electronic temperature control - Automatic reversal of adhesive dosing via PLC (same and counter-rotating) - Automatic infeed guide, no manual adjustment of edge thickness required - Central control via PLC-controlled control panel, including plain-text error display - Program memory with name and number programs

Condition: excellent (used), functionality: fully functional, - Paul 15 AO under-table crosscut saw Well-maintained machine with low operating hours Bwedpfxjyf Uppe Abbeh - Hydraulic saw stroke - 150 mm cutting height - Approx. 590 mm max. cutting width - Left roller conveyor 2 m with 3 pneumatic stops - Right roller conveyor 4 m

Condition: used, tank capacity: 270 l, GENERAL Design: vertical Remarks: Handhole diameter approx. 260 mm (handhole cover plated); deposits and metallic discoloration inside the vessel Internal diameter: 690 mm Total height: 2,120 mm Max. overpressure: 2.0 bar Location: Bremen Nameplate: Bsdpfeyciydox Abbowh Volume: 270 liters Product-contact material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 670 mm Last intended use: biochemistry VESSEL Support type: feet Number of feet: 4 pcs EQUIPMENT Manhole / dome: handhole Outlet: 52 mm MATERIAL SPECIFICATION Flange material: steel Foot material: steel

Condition: refurbished (used), C11 MKL Cross-Cut Optimization Line, offered by Wood Expert Industry, is a state-of-the-art technological solution designed specifically for industrial wood processing and operational workflow optimization in woodworking facilities. All equipment comprising the processing line is manufactured by Paul Germany and was completely overhauled in July 2025 with zero operating hours. Paul C11 MKL Lumber Optimization Line Components Bwsdow Emf Ropfx Abboh - 9.0 m / 230 mm Inclined Conveyor Belt Ideal for the automatic and efficient handling of wood pieces towards the processing area, equipped with a guided belt and robust clamping parts for stable transport. - Measuring Station with Luminescent Scanner and Photocell Allows precise identification of the start and end of workpieces, featuring dedicated lower rollers for high-accuracy measurements. - Pressure Roller Unit Ensures correct alignment and pressing of pieces between 250 and 4200 mm, with manual adjustment available according to the material thickness. - Reinforced Marking Rails, Left and Right Automatically pre-marks cutting positions for increased efficiency and accuracy in subsequent processing. - C11 MKL Optimizer – CNC Cross-Cut Saw Station Includes a robust welded steel frame, 500 mm TCT blade, 5.5 kW servo-driven motor, variable speed, and an advanced feeding system with lower/upper rollers for precise piece guidance. Electric adjustment of the upper rollers allows automatic adaptation to wood thickness. The system features automatic waste extraction, extraction ports, CE safety compliance, and advanced cutting quality options (blade with 132 conical teeth). - Waste Extraction System Comprises an 11.5 m / 230 mm conveyor belt and ascending waste belt (3.0 m / 500 mm with collection hopper), optimizing material flow and disposal of residues. - Length Sorting System With pneumatic ejectors and basic sorting equipment, this facilitates automatic organization and discharge of pieces to two outfeed positions, increasing line productivity. - Maxi8 Premium Operator Terminal and Optimization Software 17” touchscreen terminal, dust-protected, remote diagnostics, Linux-based, with dedicated optimization software (up to 60 cutting lists, 9 grading options, 400 preset lengths/list), advanced statistics, network integration capability. Includes data import/export options via USB. - Control and Automation Equipment Standardized electric cabinets, control panels, complete installation and wiring performed with high-quality components for intensive industrial use. Benefits of integrating this line: - Fully automated cross-cutting process, significantly reducing human error. - Increased efficiency and yield through cutting list optimization and automatic length sorting. - Adaptability to various thicknesses and sizes of workpieces. - Advanced digital control and remote diagnostics for quick interventions. - High reliability, reduced maintenance costs, and adherence to strict CE safety standards. This optimization line can be customized for different types of wood processing facilities, ensuring efficient operation tailored to every client’s requirements.

Condition: used, Two roller conveyors from Paul, suitable for the sub-table crosscut saw AO or similar machines. Roller conveyor length 1: 340 cm Roller conveyor length 2: 190 cm Bwodpfjyarm Usx Abbeh Roller width: 56 cm

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, saw blade diameter: 500 mm, cutting height (max.): 89 mm, cutting width (max.): 200 mm, Optimizing cross-cut saw PAUL C11 MKL Bsdpfex H Uaxsx Abbjwh Year of manufacture: 2014 The machine is equipped with a measuring station and 5 ejectors. Technical specifications: Cutting height: 3 - 89 mm Width: 30 - 200 mm Minimum workpiece length: 300 mm Saw blade diameter: 500 mm Saw motor power: 5.5 kW

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 99-908.06, feed rate X-axis: 199 m/min, working height: 100 mm, Crosscutting System PAUL Model 14 Year of manufacture: 1997 Saw motor: 7.5 kW Bwsdpfxeybbnqo Abbeh Feed motor: 4 kW Driven lower rollers: 6 pcs Non-driven upper rollers: 6 pcs Minimum cutting time: 0.2 sec Max. feed speed: 3.33 m/sec Cuts per minute: 120 Min. infeed length: 300 mm Max. infeed length: 7000 mm Max. timber thickness: 100 mm Timber width: 380 mm Min. timber cross-section: 12 x 40 mm Max. timber cross-section: 45 x 380 / 100 x 200 mm Max. timber weight: approx. 70 kg Min. fixed length: 140/30 mm Infeed conveyor: 5200 mm Outfeed conveyor: 6100 mm with 4 ejectors (1000 mm, 500 mm ...) Max. stock length: 5000 mm Video of the running machine available upon request.