Used Boston Wire Stitcher for sale (3,578)

Condition: excellent (used), Year of construction: 2007, operating hours: 16,906 h, functionality: fully functional, Sodick AQ 300 L in good condition Operating hours: 16,906 Year of manufacture: 2007-11 Linear servo control X, Y, Z: 300 x 200 x 200 mm U, V: 80 mm Isdoxpu I Eopfx Ah Neal Wire diameter: 0.15–0.3 mm (0.25 mm installed) Max. workpiece dimensions: 740 x 440 x 200 mm (X, Y, Z) Max. workpiece weight: 300 kg Chiller Deionization cartridge Complete documentation Machine is powered for inspection

Year of construction: 1997, condition: ready for operation (used), Müller Martini cover feeder 1528, year of manufacture 1997 Ijdpewvmqbofx Ah Nsal

Condition: used, Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, Travel X 350 mm / Y 250 mm / Z 220 mm incl. chiller Isdpex Hghuofx Ah Nsal Automatic wire threading Water bath

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm Iajdpjw Ucyusfx Ah Nsl TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: ready for operation (used), 1 x Stitching unit 380 with Amrys 2 x Stitching headsd HK75 1 x Caliper control with reject 1 x Obluque sheet saddle monitor 1 x Remote control jogger inch Ijdpfx Ahsxya Eqj Njal 5 x Section feeders 370 with Amrys 1 x Cover folder feeder 554 with Amrys 1 x Three knife trimmer 449 with Amrys 1 x Muller Martini Perfetto stacker delivery 450

Year of construction: 2015, condition: ready for operation (used), General Data Machine weight 3000 kg Iasdpfox D Duqox Ah Nol Control Unit Brand FANUC Model RoboCut α-C600iA Main Drive Number of axis 5 Min. Wire Diameter 0.1 mm Max. Wire Diameter 0.3 mm Movement X-Axis Movement 600 mm Z-Axis Movement 310 mm Y-Axis Movement 400 mm This 5-axis FANUC RoboCut alpha C600iA was manufactured in 2015, featuring X/Y axis travel of 600 mm × 400 mm and a Z-axis option up to 410 mm. It supports a maximum workpiece weight of 1000 kg and utilizes a FANUC Series 31i-W MODEL B CNC for precise control. Equipped with AI technology for enhanced accuracy and automatic wire threading, it's ideal for detailed machining tasks. Consider the opportunity to buy this FANUC RoboCut alpha C600iA wire edm machine. Contact us for more information. Application Types EDM

Year of construction: 2007, condition: ready for operation (used), Saddle stitcher Heidelberg flat pile feeder DHU 450 Iodpoxw Iryefx Ah Noal

Condition: used, Year of construction: 2015, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, Travel: X 600 / Y 400 / Z 310; Water bath machine; Automatic wire threading; Chiller. Iasdpfx Aox Hgg Dsh Nel

Condition: ready for operation (used), 1 x stitching unit 380 with Amrys 2 x stitching heads HK75 Iedpfxjvpaubo Ah Noal 6 x section feeders 370 with Amrys ASIR3 1 x cover folder feeder 1554 with Amrys 1 x three knife trimmer 449 with Amrys 1 x OMG stacker delivery

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 3030 mm Measurements depth 2687 mm Measurements height 2150 mm Machine weight 3500 kg Main Drive Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 310 mm V-Axis Movement 150 mm U-Axis Movement 150 mm Workpiece Workpiece weight 1500 kg Additional Equipment Cooling/Temperature Control: Cooling system with temperature regulation Generator: Transistor pulse generator Output Current: 50 A Generator Size: 600 x 650 x 1765 mm Iasdpfx Ahsx D Rqfe Njl Generator Size: 600 x 650 x 1765 mm This 5-axis Mitsubishi MV2400S wire EDM machine was manufactured in 2015. It features X, Y, Z movements of 600 x 400 x 310 mm and U, V axes at 150 x 150 mm, supporting a maximum workpiece weight of 1,500 kg. Equipped with an advanced Mitsubishi M700 controller with 3D CAD/CAM capabilities, it ensures precise machining. Consider the opportunity to buy this Mitsubishi MV2400S wire EDM machine. Contact us for more information about this machine. Application Types EDM

Year of construction: 1998, condition: ready for operation (used), Steel saddle stitcher ST 100.1, year of manufacture 1998 1,223 operating hours. Manual system (expandable to 2) 4 double feeders Stitching station with lateral measuring control Isdeq Rw Exjpfx Ah Njal 2 Hohner 52/8 standard stitching heads 2 Hohner 52/8 eyelet stitching heads Lateral measuring control Three-knife trimmer with center cutting device transfer marking table shingle delivery 2 pumps documentation

Condition: ready for operation (used), 1 x stitching unit - 380 Iaedpoxxnlpofx Ah Nsl 2 x stitching heads HK75Q 1 x remote control jogger inch 1 x oblique sheet saddle monitor 6 x section feeders 370 1 x cover folder feeder 1529 1 x three knife trimmer 449 1 x stacker delivery - Perfetto 450   Optional if needed; Centre cut for double production small size attachment for feeders additional stitching heads 

Year of construction: 2013, condition: ready for operation (used), General Data Machine weight 3500 kg Control Unit Brand MITSUBISHI Main Drive Number of axis 3 Movement X-Axis Movement 600 mm Ijdpfsx D Iv Sex Ah Nsal Y-Axis Movement 400 nmm Z-Axis Movement 310 mm Workpiece Workpiece X 820 mm Workpiece Y 305 mm Workpiece Z 1050 mm Workpiece weight 1500 kg Additional Equipment Wire diameter: 0.1 – 0.3 mm This 3-axis Mitsubishi Electric MV2400R wire EDM machine was manufactured in 2013. It features a PC-based control unit with a 15" LCD touchscreen, supporting 2D/3D CAM and graphics verification. Capable of handling workpieces up to 1050 x 820 x 305 mm and 1500 kg, it offers a machining travel of 600 x 400 x 310 mm. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi Electric MV2400R machine we have for sale. Contact us for more information. Application Types EDM

Year of construction: 2017, condition: ready for operation (used), Saddle stitcher Iajdpfjlucypex Ah Njl Hohner horizontal flat pile feeder (solo) for HSB 9000

Year of construction: 2013, condition: ready for operation (used), General Data Measurements width 2720 mm Measurements depth 2520 mm Measurements height 2290 mm Machine weight 4400 kg Main Drive Number of axis 5 Movement X-Axis Movement 650 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm V-Axis Movement 160 mm U-Axis Movement 160 mm Workpiece Workpiece weight 800 kg Isdpfx Aox D Rczsh Neal This 5-axis EXCETEK V 650 G was manufactured in 2013. It's a wire EDM machine capable of handling workpieces up to 1000 × 700 × 345 mm and 800 kg. Features include X, Y, Z travels of 650 mm, 400 mm, and 400 mm respectively, plus U/V-axis travel of 160 × 160 mm. It boasts a solid cast-iron construction and a stainless steel worktable for enhanced durability and precision. Contact us for more information about this machine. Application Types EDM

Year of construction: 1997, condition: ready for operation (used), Müller Martini flat pile feeder 370, year of manufacture 1997 Iasdpfx Aewvmp Rsh Nol 6x

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 4500 kg Main Drive Number of axis 3 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 256 mm Workpiece Workpiece weight 200 kg Additional Equipment Ijdpfx Ahsx D Sb Ee Neal Wire System: Wire diameter 0.1-0.33 mm, Wire speed 60-300 mm/s, Wire tension 0-25 N, Wire spool up to 25 kg, Threading system up to 250 mm height, nozzles 1 mm and 2 mm This 3-axis AGIE Challenge 2 eCut wire EDM machine was manufactured in 2006. It offers precision electrical discharge machining capabilities, ideal for detailed and intricate metal work. Consider the opportunity to buy this AGIE Challenge 2 eCut wire EDM machine. Contact us for more information about this machine. Application Types EDM

Year of construction: 1997, condition: ready for operation (used), Müller Martini complete control cabinet, year of manufacture 1997 Iaodpfxowvmp Dj Ah Njl

Year of construction: 1991, condition: ready for operation (used), Main Drive Number of axis 3 Movement X-Axis Movement 500 mm Z-Axis Movement 270 mm Iaedpfx Asx D Iakjh Njl Y-Axis Movement 350 mm This 3-axis Sodick A500L wire edm machine was manufactured in 1991. It features a 500 mm X-axis, 350 mm Y-axis, and 270 mm Z-axis, providing precise and efficient operations. If you are looking to get high-quality wire EDM capabilities, consider the Sodick A500L machine we have for sale. Contact us for more information. Application Types EDM

Year of construction: 2007, condition: ready for operation (used), This Sodick AQ537L was manufactured in 2007. It operates optimally between 20°C and 25°C ambient temperatures, with a full load current of 43 A and a rated capacity of 15 kVA. It requires a supply voltage of 200 V and is designed for three-phase power. Contact us for more information about this machine. Application Types EDM Iajdpsx D Iplofx Ah Nel

Year of construction: 2015, operating hours: 3,600 h, condition: ready for operation (used), General Data Machine weight 3400 kg Measurements height 2070 mm Ijdpfsx D Enxox Ah Njal Measurements depth 1915 mm Main Drive Number of axis 3 This 3-axis SEIBU M50AG wire EDM machine was manufactured in 2015. It supports workpiece dimensions up to 800x650x300 mm and a maximum weight of 800 kg. Features include a rapid traversing speed of 1200 mm/min and a fine increment capability of 0.0001 mm for precise machining. If you are looking to get high-quality EDM capabilities, consider the SEIBU M50AG machine we have for sale. Contact us for more information about this machine. Application Types EDM

Year of construction: 2018, condition: ready for operation (used), General Data Machine weight 2722 kg Control Unit Brand MITSUBISHI Model M800 Main Drive Number of axis 5 Isdpfx Ahsx D Ryyo Njal This 5-axis Mitsubishi MV1200R was manufactured in 2018 and features advanced capabilities such as X-Axis Travel of 15.7", Y-Axis Travel of 11.8", and Z-Axis Travel of 8.7". It includes a Mitsubishi M800 control, Auto Wire Threading, and a Chiller for enhanced performance. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200R machine we have for sale. Contact us for more information about this machine. Application Types EDM

Year of construction: 2008, condition: ready for operation (used), General Data Machine weight 3800 kg Measurements height 2220 mm Measurements depth 3200 mm Movement X-Axis Movement 370 mm Z-Axis Movement 250 mm Y-Axis Movement 270 mm Main Drive Number of axis 5 Dimensions Iaodex D Dv Iepfx Ah Nol Machine Length 3200 mm This 5-axis Sodick AQ 327 L wire EDM machine was manufactured in 1995. It features a table/work tank of 570 × 420 mm, supports a maximum workpiece weight of 500 kg, and offers a taper angle of ±25° for 80 mm cutting height. If you are looking to get high-quality precision cutting capabilities, consider the Sodick AQ 327 L machine we have for sale. Contact us for more information about this machine. Application Types EDM

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 530 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, wire diameter (max.): 0.35 mm, number of axes: 5, wire diameter (min.): 0.1 mm, Main Drive Number of axis 5 Min. Wire Diameter 0.1 mm Max. Wire Diameter 0.35 mm Movement X-Axis Movement 530 mm Z-Axis Movement 400 mm Y-Axis Movement 350 mm Isdjx D D Taepfx Ah Nsal This 5-axis ONA KE350 wire EDM machine was manufactured in 2002. It features X/Y/Z travels of 530 × 350 × 400 mm and U/V travels of 140 × 140 mm, supporting a maximum workpiece size of 1050 × 800 × 400 mm and weight up to 3000 kg. It includes high-precision closed diamond guides and capabilities for automatic wire threading and water temperature control. Consider the opportunity to buy this ONA KE350 wire EDM machine. Contact us for more information. Application Types EDM

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1860 mm Measurements depth 1400 mm Measurements height 1800 mm Machine weight 1900 kg Main Drive Number of axis 5 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 220 mm V-Axis Movement 32 mm U-Axis Movement 32 mm Workpiece Workpiece weight 500 kg Additional Equipment Iaedpfx Ahex D Iifo Nsl Water purifier tank Central lubrication Paper filtration Working light This 5-axis Mitsubishi FX10K wire EDM machine was manufactured in 2001. It features a 32-bit CNC control, automatic wire threading, and a generator for brass wire cutting. Capable of handling workpieces up to 630 × 530 mm and 500 kg, it includes a water purifier tank and central lubrication. Reach out for more information about this machine. Application Types EDM