Used Belt Press for sale (20,792)

Condition: good (used), Tranklein BP bookbinding press for pad/block pressing The machine is in very good condition, fully functional, and ready for production. Power supply: 380V. Fast operation. Hydraulic power unit. Format: 340 x 260 mm. Stack height: 820 mm. Adjustable pressing force, max. 2500 kg. Weight: 250 kg. Mounted on casters for easy movement. Dkodpez S Utlsfx Aiisw

Condition: new, Specifications: capacity up to 600 kg/h power: drive motor 0,75 (1,02) kW (PS) brush cleaning 0,37 (0,5) kW (PS) high pressure cleaner 4,7 (6,4) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 825 mm width 1 085 mm height 1 290 mm insertion resp. discharge height 1 290 mm belt width 420 mm spread width 300 mm spread height 10 - 50 mm weight (belt press) 550 kg material 1.4301 / AISI 304 juice yield up to 75 % belt speed (continuously) 2,1 - 5,5 m/min Dksdpfed Nrakex Aiisw lead time 0,4 - 1 min water connection min. G ½ “, min. 12 l/min juice discharge height 305 mm pomace discharge height 780 mm suitable for pomaceous and stone fruit scope of delivery high-pressure cleaner, compressor

Year of construction: 2026, condition: new, Our systems can be dismantled down to the base frame in just a few minutes for effective cleaning. Our belt presses are suitable for pressing fruit and vegetables. Effective belt cleaning is done with the help of brushes and a belt washing system. You only need an air compressor to operate the system. Technical Information • Rated output: 650 kg/h • Power consumption: 1 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and infinitely variable belt speed control • Operator friendly • Easy to clean • Rolling machine feet Dimensions: Length: 2,230 mm Width: 1,250 mm Height: 1,250 mm Height assumptions: 1,240 mm Height of pomace discharge: 500 mm Height of juice outlet: 370 mm Weight: 480 kg Optional: Juice collection tank ISW 100 Automatic juice draining Djdpfx Asv Sq Rxsiijkw

Year of construction: 2026, condition: new, Specifications: - Performance: 1400 kg/h - Electric demands: 3 kW, 400 V, 6 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 2500x1330x1230 mm Dksdpfxjd Aqzno Aiisw - Input height: 1250 mm - Output height: 370 mm - Weight: 1150 kg - IP65 certified electronics - Food industrial, massive polyester belt - Belt: 2mm thick, density: 6x16 filament/cm^2, ½ rate (suitable for large fiber-free juice) - High yield: 75% - depends on the freshness and quality of the fruits - High-pressure washer demand: 500 L/h - Compressed air demand: 50 L/h 6 bar - Built-in inverter: steplessly adjustable belt speed Fully automatic operation, with closed work area, reduces the oxidation to the minimum. In the bottom of the machine, there are two spinning washer heads guarantees optimal cleaning during the process. The distance between the press cylinder and the juice collector tray reduced against foaming. Very easy to clean. With 4pcs vibration-free feet. It requires minimal maintenance. High-pressure washer and air compressor are essential for operating.

Condition: new, functionality: fully functional, Equipment: CE marking, documentation/manual, Profi Press: Portal presses, straightening presses, and other custom-made hydraulic presses for large and specialized projects. *Do you have a large workpiece or a specific pressing application? We build the press to meet your requirements.* RHTC supplies custom-made hydraulic portal presses/straightening presses for processing large and heavy workpieces. From an extra-long work table (recently delivered a 200-ton model with a 5000 x 4500 mm table size) to multiple portals and cylinders: we discuss your application and, together with you, develop a suitable design. *Custom-made solutions for your product and process.* Depending on the application, we can customize, among other things: - Press force and table dimensions - Working width, free working height, and cylinder stroke - Number of portals and cylinders - Manual or motorized movement of portal and cylinder - Hydraulics, electrical design, and controls - Software for setting and storing various parameters In this way, we tailor the machine to the dimensions of your product, the required process, and the way you want to work. *From a special portal press to a larger industrial project* Our realized projects include portal presses with long and wide work tables, designs with two portals and two cylinders, and presses for pressing large shafts out of gearboxes. Even with extensive custom-made projects, the design starts with your application. We discuss the requirements, develop the design, and submit the technical drawings for your approval before production begins. *Customization across our entire machine range* Our capabilities extend beyond portal presses. You can also request custom-made solutions for other types of hydraulic presses, from small to large, from our range. We assess each project to determine which modifications are technically feasible and appropriate. This includes hydraulic workshop presses with a wider working width (including a sliding cylinder), C-frame presses for performing tests in a laboratory, production presses for compacting powder, arch presses for shipbuilding, and four-column presses for very precise pressing operations. *Discuss your project with RHTC* Send us your application, workpiece dimensions, and desired press force via the contact request in this advertisement, if known. If possible, include a drawing or photo. This will allow us to assess your request and discuss a suitable design and quote. You can also submit your request via the contact form on the RHTC website. Dodpfx Aj Ah El Ssiiekw The photos show examples of realized custom-made solutions. The design and specifications offered are determined per project.

Year of construction: 1990, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 24066, REFURBISHED MACHINE - NEW CONTROL BOX, SENSORS AND PNEUMATIC CONTROL. double belt press with pneumatic belt tensioning, automatic belt adjustment, integrated belt washing system, infinitely variable speed control, cylinder system ensures gentle pressing, high juice yield and, last but not least, clean juice quality. Easy to clean. Requires minimal maintenance. High-pressure washer and air compressor are essential for operating. Specifications: • Nominal capacity up to 3500 kg/h Djdpfx Aiszp Hd Seiskw • Electric demands: 400 V, triphase • Material: painted carbon steel and WNr. 1.4301, AISI 304 stainless steel • Dimensions (gross): 3600x2000x2200 mm • Input height: 1200-1400 mm • Weight: 2500 kg • IP65 certified electronics • Food industrial, massive polyester belt • High yield – depends on the freshness and quality of the fruits • Compressed air demand: 8 bar • Built-in inverter: steplessly adjustable belt speed The washer/elevator on the pictures is not the part of this offer, can be bought separately

Condition: used, total length: 1,200 mm, total width: 800 mm, total height: 2,200 mm, Year of manufacture: 2026 Colour: Blue Empty weight: 970 kg Price: On request - Year: 2026 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 100 - Max. stroke [mm]: 380 - Table length [mm]: 1000 - Table width [mm]: 300 - Ram width [mm]: 120 - Throat depth [mm]: 1000 - Pressing speed [mm/s]: 10 - Column spacing width [mm]: 1000 - Transport dimensions: 1200mm x 800mm x 2200mm (l x w x h) - Transport weight [kg]: 970kg Dodpfxs Aacybo Aiiekw - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, capacity: up to 7 000 kg/h electric outlet: 3kW 400V 50Hz (3 phases) fuse: 16 A dimensions: length: 4 435 mm width: 2 250 mm height: 2 160 mm insertion resp. discharge height: 1 430 mm belt width: 1 100 mm spread width: 320 - 870 mm spread height (infinitely adjustable setting): 10 - 50 mm weight: 3 400 kg material: 1.4301 / AISI 304 juice yield : up to 80 % belt Speed: 1,2 – 4,5 m/min contact time: 1,5 - 6 min water consumption for cleaning: 20 l/min connections: sewage connection: Ø 75 mm juice discharge connection: DN 40 juice discharge height: 200 mm Dkodpfx Ajdix N Hsiiow sewage discharge height: 100 mm pomace discharge height: 800 mm suitable for pomaceous and stone fruit scope of delivery: high-pressure cleaner, compressor

Condition: new, capacity: up to 1 000 kg/h power: drive Motor: 0,75 kW brush cleaning: 0,37 kW high-pressure cleaner: 4,7 kW electric outlet: 400V 50Hz (3 phases) fuse: 16 A dimensions: length: 2 145 mm width: 1 270 mm height: 1 290 mm insertion resp. discharge height: 1 290 mm belt width: 580 mm spread width: 240 -460 mm spread height (9 stages): 10 - 50 mm weight: 665 kg material: 1.4301 / AISI 304 juice yield up to 75 % Dedpfxsdix Ico Aiijkw belt speed (continuous): 2,1 - 5,5 m/min lead time: 0,6 - 1,6 min water consumption for cleaning: 3 l/min connections: sewage Connection: DN75 juice discharge Connection: 1 ½ “ juice discharge height: 305 mm sewage discharge height : 86 mm pomace discharge height: 745 mm suitable for pomaceous and stone fruit scope of delivery: high-pressure cleaner, compressor

Condition: used, Technical specifications: Throughfeed press with automatic loading and unloading function + integrated shelf heating. Number of cylinders: 6 Cylinder diameter: 70 mm Optional connection to central heating system Integrated heating power supply: 4 x 12 kW heaters Shelf dimensions: 1900x3000 mm Clearance: 130 mm Dkodpfj Ah Ed Iox Aiiew Hydraulic clamping Safety switch Motor power: 2 kW Power supply: 400 V Two tables – loading/unloading Dimensions: 3300x2500 - belt conveyor with 1 kW motor 3300x2500 - roller conveyor Overall dimensions: Length: 11000 mm Width: 4000 mm Height: 1800 mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter Profipress C 2800 P - 6 m gluing press Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Condition: Very good Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of glued wooden panels and elements made of soft timber. The machine was developed for efficient production using PVAC glue in D2 / D3 class and allows processing of material within specified width, thickness and input length ranges. According to the documentation, this model can process timber with widths from 30 to 80 mm, thicknesses from 15 to 40 mm and input lengths from 2100 to 2800 mm. The machine allows the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. The output is up to 10 to 15 infeeds per minute, depending on the entrance width. The Profipress C 2800 P - 6 m is intended for processing soft timber. The permitted bending tolerance is maximum 5 mm per meter. The documentation also specifies recommended operating conditions, including room temperature from 15 to 30 degrees Celsius and air humidity in the range of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 - Performance: max. 10–15 infeeds/min, depending on entrance width - Timber width: 30–80 mm - Timber thickness: 15–40 mm - Timber entrance length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Timber type: soft timber - Permitted bending: max. 5 mm/m - Glue type: PVAC D2 / D3 - Recommended room temperature: 15–30°C - Recommended air humidity: 40–65% Features and advantages: - Press designed for glued panel production - Machine from the renowned Weinig Dimter brand - Output up to 10–15 infeeds per minute - Possibility to produce panels with variable width - Suitable for processing soft timber - Works with common PVAC D2 / D3 glue - Industrial application for woodworking and production plants Dksdeyvgiajpfx Aiiow

Condition: used, total length: 1,200 mm, total width: 800 mm, total height: 2,100 mm, Year of manufacture: 2026 Colour: Blue Djdpfxez U U Dpe Aiiekw Empty weight: 540 kg Price: On request - Year: 2026 - Documentation available: Yes - CE marking present: Yes - Operating hours: 0 - Drive system: Conventional - Press model: Workshop press - Press configuration: Single-acting - Press force [ton]: 60 - Max. stroke [mm]: 380 - Table length [mm]: 1000 - Table width [mm]: 300 - Ram length [mm]: 100 - Throat depth [mm]: 750 - Height adjustment [mm]: 750 - Pressing speed [mm/s]: 10 - Options: Verplaatsbare cilinder - Column spacing width [mm]: 750 - Transport dimensions: 1200mm x 800mm x 2100mm (l x w x h) - Transport weight [kg]: 540kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, capacity: up to 3 000 kg/h electric outlet: 3,5kW 400V 50Hz (3 phases) fuse 16 A dimensions: length: 3 720 mm width: 1 730 mm height: 2 110 mm insertion resp. discharge height: 1 430 mm belt width: 660 mm spread width: 220 - 440 mm spread height (infinitely adjustable setting): 10 - 40 mm weight: 2 200 kg material: 1.4301 / AISI 304 Dkodpfx Aodix I Uoiiew juice yield : up to 80 % belt Speed: 1,2 – 4,5 m/min contact time: 1,4 – 4,2 min water consumption for cleaning: 10 l/min connections: sewage connection: Ø 75 mm juice discharge connection: DN 25 juice discharge height: 130 mm sewage discharge height: 50 mm pomace discharge height: 810 mm suitable for pomaceous and stone fruit scope of delivery: high-pressure cleaner, compressor

Condition: new, Washing machine WA LC40 with centrifugal mill RM40 for belt presses EBP500, EBP650 and EBP820 capacity up to 2 000 kg/h power: elevator 2,2 kW mill 4,0 (5,5) kW (PS) Dksdpob Ncc Djfx Aiiow electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 2 000 mm width 700 mm height 2 400 mm insertion resp. discharge height 800 mm weight 285 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside connection for waste water 2 “ outside mash discharge height 1 500 mm suitable for pomaceous fruit scope of delivery 7, 9 and 12 mm cutting screen

Condition: new, capacity up to 3 000 kg/h power: drive motor 2,2 (3,0) kW (PS) washing machine motor 0,37 (0,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 3 035 mm width 2 085 mm Dsdpfx Aob Nt Irsiiskw height 1 690 mm insertion resp. discharge height 1 690 mm belt width 1 200 mm belt length 9 950 mm spread width 900 mm spread height (5 stages) 0 - 65 mm weight 2 500 kg material 1.4301 / AISI 304 juice yield up to 75 % belt speed 0,5 - 3,5 m/min contact time 2 - 11 min water consumption for cleaning 6 l/min connections: sewage connection Ø 76,1 mm juice discharge connection 1 “ juice discharge height 400 mm sewage discharge height 246 mm pomace discharge height 880 mm suitable for pomaceous and stone fruit scope of delivery high-pressure cleaner, compressor

Condition: new, Specifications: capacity up to 300 kg/h power: drive motor 0,37 (0,5) kW (PS) washing machine motor 0,12 (0,16) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 280 mm width 870 mm height 1 350 mm insertion resp. discharge height 1 265 mm belt width 350 mm belt length 4 900 mm spread width 240 mm spread height (infinitely adjustable setting) 0 - 50 mm weight 350 kg material 1.4301 / AISI 304 juice yield bis zu 75 % belt speed 2 m/min contact time 1 min water consumption for cleaning 2 l/min connections: Dksdpjb Nc Shsfx Aiijw sewage connection Ø 48,3 mm juice discharge connection 1 “ juice discharge height 420 mm sewage discharge height 120 mm pomace discharge height 700 mm suitable for pomaceous and stone fruit

Condition: new, capacity up to 700 kg/h power: drive motor 0,55 (0,75) kW (PS) washing machine motor 0,12 (0,16) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 940 mm width 1 080 mm Dkodpfx Aeb Ndqqeiiew height 1 300 mm insertion resp. discharge height 1 300 mm belt width 500 mm belt length 6 530 mm spread width 300 mm spread height (9 stages) 0 - 50 mm weight 520 kg material 1.4301 / AISI 304 juice yield up to 75 % belt speed: stage 1 1,2 m/min stage 2 2,4 m/min contact time: stage 1 3 min stage 2 1,5 min water consumption for cleaning 3 l/min connections: sewage connection Ø 76,1 mm juice discharge connection 1 ½ “ juice discharge height 300 mm sewage discharge height 170 mm pomace discharge height 480 mm suitable for pomaceous and stone fruit scope of delivery high-pressure cleaner, compressor

Year of construction: 2026, condition: new, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous Capacity: 400 kg/h The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. The juice yield of apples using our belt press is ~75 %. There is a filtration sieve integrated into the juice collection tank. Because of that the belt press 400 filtrates the juice even during the pressing stage providing cleaner and more pure product. The belt presses work automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. The belt press includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. After work, belt press should be manually washed with a water stream. A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. Belt tension is adjustable. Machine is made entirely of stainless steel and has adjustable feet. Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble. Interested in belt press only with different efficiency? Check out our other belt presses: POWERPRESS 800, POWERPRESS 1200, POWERPRESS 1500. Dkedpfx Aieflpnyeiew

Condition: new, capacity up to 1 500 kg/h power: drive motor 0,55 (0,75) kW (PS) washing machine motor 0,12 (0,16) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 2 200 mm width 1 465 mm height 1 460 mm insertion resp. discharge height 1 460 mm belt width 650 mm belt length 7 200 mm Djdpfx Asb Ntp Asiijkw spread width 450 mm spread height (infinitely adjustable setting) 0 - 50 mm weight 1060 kg material 1.4301 / AISI 304 juice yield bis zu 75 % belt speed 0,9 - 1,8 m/min contact time 1,9 - 3,8 min water consumption for cleaning 3 l/min connections: sewage connection Ø 75 mm juice discharge connection 2 “ juice discharge height 435 mm sewage discharge height 250 mm pomace discharge height 810 mm suitable for pomaceous and stone fruit scope of delivery high-pressure cleaner, compressor

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 27 h, one machine directly available *Prior sale expressly reserved *Round silo at extra charge Press can only be supplied with a system component such as a chipper, cutting mill, hammer mill, screw conveyor, conveyor belt with overbelt magnet or suction Hydraulic briquetting press for rectangular briquettes Type R - throughput up to maximum 500 kg / h * depending on the specific weight of material. Based on a bulk weight of 220 kg / m³. + 24h operation possible + Longevity + Low maintenance costs + Compact structure + High energy efficiency thanks to innovative hydraulics + 25 years of experience . * depending on the bulk weight of your raw material * based on a bulk weight of 200 kg per cubic meter Detailed information after a successful test with your material . Drive motor: 22 kW - IE 3 400 V / 50 Hz / 3 phases Oil cooler: 2.2 kW Agitator: 0.55 kW Screw: 1.5 kW . Hopper: 400x800mm Capacity of approx. 150 liters . Soft start for hydraulic motor Siemens PLC S7-1200 . Auto start and stop via a light barrier integrated in the feed hopper Up to 560 briquettes per hour . Specific pressing pressure: 1,700 kg / cm² Up to 300 bar pressing pressure Briquette format 150x60 mm Briquette length: 40 to 110 mm (adjustable) Dimensions: 2.9 x 2.0 x 2.1 m Weight: 3,800 kg. 600 liter hydraulic oil tank The control is designed for operation from + 10 degrees to +35 degrees . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 15% - Maximum chip length: 20 x 2 x 2 mm - Installation temperature: temperature-controlled room at at least + 8 ° C Djdpfx Aiegbpm Tsiokw Otherwise, we recommend heating for an extra charge - The loading must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear can be the result.

Condition: new, capacity up to 6 000 kg/h power: elevator 2,2 (3,0) kW (PS) mill 5,5 (7,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 800 mm width 900 mm height 2 450 / 2 700 mm insertion resp. discharge height 800 mm weight 420 / 450 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside Dedpfx Aob Ncnteiiskw connection for washing bath 2 “ outside mash discharge height 1 480 mm suitable for pomaceous fruit scope of delivery 7, 9 and 12 mm cutting screen

Condition: ready for operation (used), Year of construction: 2016, stroke length: 280 mm, total width: 3,050 mm, total height: 5,000 mm, product length (max.): 4,000 mm, Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-500 features a press capacity of 500 tons and a stroke length of 280 mm. It includes a slide area of 2800 x 1200 mm and a bolster area of 3000 x 1300 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-500 machine we have for sale. Contact us for further details. • Press capacity: 500 ton • Rated tonnage point above BDC: 7 mm • Strokes per minute: 30 SPM • Stroke length: 280 mm • Die height: 550 mm • Slide adjustment: 120 mm • Slide area (L x W): 2800 x 1200 mm • Bolster area (L x W): 3000 x 1300 mm Dsdpfx Aisz Sqiieijkw • Bolster thickness: 235 mm • Working height: 1300 mm • Side opening (W x H): 1200 x 700 mm • Main motor: AC 45 kW x 4 / VS 55 kW x 4 • Slide adjustment motor: 3.7 kW x 6 • Air pressure required: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm Technical Specification Stamping Force 5000 Kn

Condition: ready for operation (used), Year of construction: 2016, stroke length: 350 mm, total width: 3,350 mm, total height: 5,500 mm, overall weight: 100,000 kg, product length (max.): 4,100 mm, Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-600 features a press capacity of 600 tons and a stroke length of 350 mm. It includes a slide area of 2900 x 1300 mm and a bolster area of 3000 x 1400 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-600 machine we have for sale. Contact us for further details. • Press capacity: 600 ton • Rated tonnage point above B.D.C.: 7 mm • Number of strokes: 30 SPM • Stroke length: 350 mm • Die height: 600 mm • Slide adjustment: 120 mm • Slide area (L x W): 2900 x 1300 mm Dkjdjz Sqf Rjpfx Aiisw • Bolster area (L x W): 3000 x 1400 mm • Bolster thickness: 240 mm • Working height: 1300 mm • Side opening: 1450 x 750 mm • Main motor: AC 55 kW x 4 / VS 75 kW x 4 • Slide adjustment motor: 5.5 kW x 6 • Air pressure: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm • Quantity available: 5 units • Pricing note: indicated price is per individual machine Additional equipment • Shuttle transfer robot/system • Included when purchasing the complete package of machines • Available separately at EUR 120,000 Technical Specification Stamping Force 6000 Kn

Condition: used, Year of construction: 2024, functionality: fully functional, In this listing, you are purchasing a second-hand ‘Lotus Press LTS 138’ textile press Item for sale: 1x Lotus Press LTS 138 Dkjdezy U Uyspfx Aiiow Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! For further information, please feel free to contact us directly.

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm Dsdpozrpt Uefx Aiiokw ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication