Belt press buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
5
New Screw compressor ALMIG BELT 11 - 10 bar MADE IN GERMANY Year of construction: 2017 Warranty Terms: 60 months (with ALMiG AIRCARE) technical spezifications: type: BELT 11 Maximum operating pressure: 10 bar Delivery quantity at 10 bar : 1,50 m³/min Installed power: 11 kW Protection class / Insulation class Drive motor: IP 55 / F Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T13) : 69 dB (A) Compressed air connection: G 1" 7g8revn78 Dimensions ... more
4

Belt Press Dewatering Klein BS 20

MauerGermany dealership location
6608 km
1985
good (used)
Zc2i9s0nu Length approx. 5800 mm x width approx. 2400 mm x height approx. 2400 mm Accessories: Control cabinet The plant is expected to be replaced in november 2018 and will then be available. more
10
Manufacturer Paal, Georgsmarienhuette, Germany Type Konti 325 B Year of construction 1991 17527 hours of operation Press power 85 t Drive power 120 kW 9xb7lvblh Subsurface conveyor belt: Effective width 1.480 mm Feeding conveyor length 8.800 mm Elevating conveyor length 11.600 mm Swan neck length 2.400 mm Height of driving axle over bottom 4.500 mm more
5

Belt Filter Press Rompf KRF 1700

DeutschlandGermany
6625 km
1986
ready for operation (used)
Bandwidth: 1700 mm Throughput: Approx. 5 - 12 m3/h Scope of delivery: Control cabinet Powder polymer system Transverse conveyor Pg2ixnrt 2 Eccentric screw pumps The belt filter press is dismantled and immediately available. more
6
"Wide belt sander HEESEMANN MFA 6 IMPRESSION Sanding width mm: 1.350 Workpiece thickness min mm: 3 Passage height max mm: 150 Sanding aggregates entirely: 2 Cross-belts: 1 Sanding rollers: 1 Steel roller: Yes Combination unit: 1 Sanding pads: 1 Bbdjwr8yv0 Segmental pressure pad: electromagnetic Segment width mm: 32 Cleaning brush: Yes Lacquer sanding: Yes Vacuum table: Yes Constant passline height: Yes Main motor power kW: 15 Sanding belt length mm: 2.150 Belt speed max m/s: 20 Adjustable sandi... more
4
3 press rolls bandwidth 400mm stepless speed setting for the screen belt with frequency converter Pneumatic belt regulation and belt tension Stainless steel construction on 4 adjustable feet weight 480kg Working width 338mm Dimensions of equipment 1860x1140x1285mm capacity. 700 kg / h Yield up to 72% Ec7ws0ywk Including belt cleaning without high-pressure cleaner and without compressor Operating side left in material flow more
2
used 132 kW screwcompressor ALMIG Belt 132 Controller: Air Control Premium Year 2016 Hours: 1340 h very good conditon, available immediately. 9x2ca2xpt Technical specifications: type: Belt 132 operating pressure of the system: 10 bar: 18,04 m³/min Installed power: 132 kW Protection class / Insulation class Drive motor: IP23/F Operating voltage / frequency: 400/50 V / Hz Sound pressure (DIN 45635 T13) : 80 dB (A) Compressed air connection: 2 1/2" Dimensions and weight Length : 2300 mm Widt... more
6
Almig Belt 45-8 Screw compressor with v-belt drive Engine power: 45kW Discharge pressure: 8 bar Quantity: 8, 07 m ³/min Used plant just was like new in customer service. M90ib Hours of operation: 439 h Last hour: 183 h Year of construction: 2012 more
6
Manufacturer Bollegraaf, Appingedam/Netherlands Type HBC-110K Year of construction 1992 (overhauled in 1996) Hours of operation 47.573 h Controls by Schneider Telemecanique Press power of main press 100 t Ba3hd8qojr Press power of pre-press 50 t Drive power 75 kW Cycle time approx.19 sec. Feed channel 1.600 x 1.100 mm (l x w) Bale size 1.100 x 1.100 mm (w x h), length adjustable Bale weight up to 1.300 kg, depending on material Tying system 10-fold automated (5 vertical/5 horizontal wires) Tra... more
4

Belt Press Klein BS 20

ÖsterreichAustria
7078 km
1987
ready for operation (used)
Bandwidth: 2000 mm Access.: Control cabinet Polymer system Nbo3x Pump Technical documentation and circuit diagram more


belt press
every day

New machines via email!

Be informed!
3

belt press Passavant Roepress 16.4

D - Nordrhein-WestfalenGermany dealership location
6368 km
2001
used
Facilities: screen belt press Passavant Type: Roepress 16.4 Version: used screen belt press Band width: 1600 mm Flow rate: Max 10 m3/h depending on the medium Year of construction: 2001 Sludge discharge height: 2150 mm Drum number: 1 Wire band width: 1600 mm Drum drive: 0.55 kW Sieve belt drive: 1,50 kW Water pump: 5.50 kW Air compressor: 1,50 kW Filtrate return: 1,10 kW 9iphnndvj Cabinet: optional Empty weight: about 5000 kg Dimensions: Lxwxh approx. 4900 x 2500 x 2730 mm more
6
Beltpress EB800 2doz2h2td Processing performance (depending on layer thickness) Step 1: 1000-1300 kg/Std Step 2: 1500-1800kg/Std Machine dimensions: Machine length: 3350 mm Machine width: 1600 mm Machine height = top of mash box: 1670 mm (on wooden plank) Bandwidth: 800 mm Mica application width: 500 mm Barrel throw height: 1060 mm (on wooden pile) The machine currently stands on 25 cm high wooden poles and can therefore also be lowered. more
1
used Screw compressor ALMIG BELT 90 LK (air cooling) - 10 bar Year of construction: 2016 Hours: 910 h technical spezifications: type: BELT 90 LK Mnvxf Maximum operating pressure: 10 bar Delivery quantity at 10 bar : 13,54 m³/min Installed power: 90 kW speed drive motor: 2965 1/min Protection class / Insulation class Drive motor: IP 55 / F Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T13) : 78 dB (A) Compressed air connection: G 2 ½" Dimensions and weight Leng... more
5

screw compressor Almig Belt 37-8

DE-34414 WarburgGermany dealership location
6527 km
2011
used
screw compressor Bvj8pkd3 more
6
Manufacturer Paal, Georgsmarienhuette, Germany Type Pacomat IS SO Year of construction 1990 Press power 35 t Feed channel 800 x 650 mm Drive power 18,5 kW Tying system 3-fold horizontal, automated Channel cross section 700 x 800 mm Bale size 700 x 700 mm, length adjustable Bale weight up to 300 kg depending on material and bale length Throughput rate up to 45 m³/h using loose material B9rzg3t8i Machine weight approx. 6.000 kg Conveyor belt type KEL 800 Manufacturer Paal Velocity of belt 0,27 m... more
6
(Cat-Nr 09-2060) The advantages of the Pressing station are universal application for several kind of fruits, we have experience with Vd397n9u •Apples, Pears, Grape juice, Cherries, Strawberries, Red currants High yield even with stored fruit Counter – current extraction can be switched on or off Instruction Manual Available Technical Data: Capacity 14 ton/h Length 6646 mm Width 4110 mm Height 5630 mm Weight 8000 kg Width of belt 1500 mm Speed of belt 0-11 m/min available: 1 more
4

Filter Belt Press HEUMESSER WH 800

DeutschlandGermany dealership location
6738 km
1996
used
Output: 2t/h, connnected load: 2kW, length: 3200mm, width: 1400mm, height: 2200mm. 8nkyoppxg more
1
Description: - Fully automatic, continuously working belt press - Open, clear design - Cleaning and speedy servicing - Oscillating belt press cleaning (HD-cleaner connection) - Pneumatic belt tension and Band alignment (oil-free compressed air) - Continuous control of belt speed and belt tension - The main components of stainless steel Technical specifications: Power: about 1500 kg / h (fresh apples Press) LxWxH: 2700x1470x1680 mm Bandwidth: 800 mm Weight: 1400-2000 kg Motor power: 1.1 kW C... more
5
With stainless steel square tube frame Djiyrrb 15 pressing rollers 2 press nipps Electrical powerd with stepless speed regulation Belt width 1500mm High pressure belt cleaning integrated Nominal capacity up to 15.000 kg/h (depending on fruits & operating condition) more
6
Singlebeltpress up to 800 kg/h on fresh apples B3p7x including automatic belttensioning and regulatingsystem integrated highpressure-beltcleaning-system inverter for beltspeed Wash&Grinding Unit with 3,0 Kw full stainless-steel construction more
6
for the pressing of fruit and vegetables Yfj87c3a throughput: up to 1500 kg/h yield up to 75% belt speed continuously adjustable inkl. high pressure cleaner inkl. Air compressor more
3
throughput up to 800 liter juice/h (on Apples) weight: 650 kg 500mm belt width 0palbra8 easy cleaning of the machine EU funding is possible more
2
Nominal capacity 3000kg/h (depending on fruits & operating condition, up to 6000kg/h) Yield up to 75% Belt width/length: 1000mm/approx. 7000mm Working width/high: 900mm/0-50mm continuously Belt speed continuously variable 1,0-5,2m/min Electrical supply: Drive motor 2,2 kW 400V Washing motor: 0,25 kW 400V Waterconsumption for belt cleaning: Approx. 3 l/operating minute Weight approx. 2300kg Dimensions: (lxwxh) 2750x1890x1690mm Thn7zdos without high-pressure cleaner and without compressor more
3
Bfyhljpw Beltpress for fruits and vegetabes Beltwith 1250mm capacity up to 10000 kg/h 27 rollers beltcleaningsystem with brushes and highpressurecleaning more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbuv0ea090 WEIMA TH 714 Briquette Press (Cylindrical):Produces 70 mm dia. x 4" (100 mm) long compacted logs. -- Approx. 1.4 m³ vertical hopper, 18 HP, (13.5 kW) motor. -- Vertical hydraulic ram compacts the material in the extrusion chamber to produce uniform material, extrusion chamber is continually filled via rotary screw type auger. -- Approx. hourly output between 250 - 300 Lbs (115 - 142 kg/Hr). -- Equipped with: Centralized control panel for e... more
2

Press Weingarten XQDHz

AmsterdamNetherlands dealership location
6220 km
1956
used
L. to R.: 1200 mmF. to B.: 600 mmDaylight: 450 mmStroke: 100 mmSpeed: 50-110 mmBed: 1140 x 680 mmRam: 1040 x 460 mmwith ?SOPREM? Coil Feeder SOP/P/275/U-500/B Bbsrt99rta more
5

Press brake, 4000 mm x 110 to EHT EHP 11-40

26215 Wiefelstede, GermanyGermany dealership location
6385 km
1977
used
Qlaqlg3cn more
6
pressure 60 t no. of strokes 80 - 400 Hub/min sheet width 150 mm table-size 700 x 530 mm dimension of ram 700 x 430 mm distance table - lower edge of ram 350 mm ram stroke - adjustable min/max 20 - 80 mm feed length 5 - 150 mm total power requirement 15 kW weight of the machine ca. 9 t Clorsjn dimensions of the machine ca. m - with band-feeding unit - 2 connecting rods - adjustable stroke - strip decoiler - noise absorbing cabine more
6

Impress D130-110-B-5/5-1-6 BOA

ScheemdaNetherlands dealership location
6317 km
2009
used
Hours of operation 15.576  hours Press power main press 127 to Specific press capacity 10,5 kg/cm² Working pressure 280 bar Feed channel 1.620 x 1.000 mm (l x w) Press volume / cycle 4,1 cbm Throughput rate under operating conditions Up to 865 cbm/h Cnfhoqp7 Cycle time under operating conditions 22 sec. Press stroke 2.900 mm Bale size 1.100 x 1.100 mm (w x h) length adjustable Driving motor 2 x 55 kW Connected load 132 kW Tying system 5-fold vertical, 5-fold horizontal, fully automa... more
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Cjezdxwo BALE-X 3.5 COMPRESSION BAGGING SYSTEM --Semi-automatic system, consists of basic machine with fill chute, compression ram and separate hydraulic pump unit with 20 HP motor (starter not included), 25 GPM pump with 50-gallon reservoir; ram pressure adjustable via hydraulic bypass valve. -- Bag size approx. 12" x 16" x 32" long = 3.5 cubic foot (weighs approx. 40 - 50 Lbs depending on moisture content and wood species); small variations in lengt... more
6

Press Helmerding KDH400/2600/2

AmsterdamNetherlands dealership location
6220 km
2002
used
L. to R.: 3100 mmF. to B.: 1300 mmMax Daylight: 800 mmStroke: 80-250 mmSpeed: 15-60 SpMBed: 2500 x 1600 mmRam: 2500 x 1400 mm Bbsrtwol89 more
6
Briquette press SCHUKO Compacto C1100C2 Hydraulic motor 4kW Hydraulic oil quantity approx. 90 litres Briquette diameter 65 mm Throughput performance according to manufacturer's instructions about 60 - 75 kg / h depending on the material To the briquetting of for example wood, polystyrene, foam, and paper PLC control system Briquette length monitoring Without shaving container and feed screw, can be mounted but also under a baghouse or dust Extractor with discharge. Operating instructi... more
5
ram pressure:400 Mp Pressure attenation:200 Mp die cushion:60 Mp Drawing cushion:900 mm Ram stroke:30 mm die cushion stroke:200 mm Installation hight, ram and table:1400 mm Workspace table:1400 x 2000 mm Ram workingspace:1400 x 2000 mm Die cushion workspace:650 x 1500 mm Ik7d80zfi Demand for oil:4000 L Connection value:270 kW voltage:380 V Shipping weight:52 to height:6600 mm width:2010 mm length:3900 mm working feed:60 mm/sec feed up:450 mm/sec feed down:500 mm/sec Year:Überholt 2000 1972 Ser... more
2

Single Column Press - Hydraulic EITEL T 6,3

Bünde bei BielefeldGermany dealership location
6460 km
1962
used
pressure 6,3 t throat 100 mm Vz30oz stroke 160 mm ca. of that pressure stroke 20 mm ram stroke speed ab 6 m/min ram stroke speed auf 16 m/min dayligth 200 mm table-size 250 x 180 mm table height 800 mm total power requirement 1,1 kW weight of the machine ca. 650 kg dimensions of the machine ca. 0,6 x 0,4 x 1,7 m Condition: ready for operation Electric 380 Volt Base Pressure time adjustment Two-hand operation Machine dealer with own stock of 2500 m² and certification of the database... more
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Cybt3xp8 VERVILLE VP405 Pet Size Bag Bagging Equipment: -- Model VP405 - 4-Station bagger -- Finish bag size 8" x 5" x up to 20" -- Complete with holding bin and screw feeding conveyor -- Production up to (4) bags per minute more
3

hydraulic press brake LAMI NOVA G 4360

D - Nordrhein-WestfalenGermany dealership location
6476 km
1992
used
pressure performance 360 to working width 4,100 mm upright width 3,100 mm 37terz9z outreach 355 mm distance table pressing bar 430 mm hydraulic stroke 235 mm number of cylinders 4 retraction force 40 to forward speed 100 mm / sec. bending speed 8 mm / sec. retraction speed 70 mm / sec. working width 900 mm two front support arms depth under flur 900 mm motorized backgauge universal die electrical data 400 V / 24 KW space requirements width - 4,300 x depth - 1,800 x height - 2,9... more
1
pressure:40 t Mskwyo distance between columns:600 mm stroke: mm ram power:40 Mp max. ram stroke:160 mm dayligth:360 mm table-size:560x400 mm T-slots:18 mm ram hole:40 mm table height:950 mm Total height:2540 mm length in width:1440 mm power capacity:5,5 kW centering bore - table plate:100 mm depth:1100 mm column depth:950 mm oil box capacity:250 l total power requirement:ant kW weight of the machine ca.: t dimensions of the machine ca.: m 100 % before loading warranty: none used double colum... more
2

Hydr. pressbrake LVD PPEB 175/30 MNC

D - 77815 BühlGermany dealership location
6593 km
1987
used
pressure 175 t chamfer lenght 3050 mm distance between columns 2550 mm control MNC 85000 stroke of upper beam 250 mm distance beam - table max. 500 mm throat 300 mm table width 180 mm feed down 100 mm/sec E272wst feed up 79,8 mm/sec working feed 12,1 mm/sec tank capacity 260 l engine output 22 kW weight of the machine ca. 14,0 t range L-W-H 5,30 x 2,02 x 3,55 m acc.: upper and lower dies, rear stop more
6

Press HEIDELBERG GTO 52+NP 1 color

More Heidelberg Gto 52
St.Leon-Rot bei HeidelbergGermany dealership location
6602 km
1982
used
M09bf Machine type: GTO 52+NP Condition (technical): 4 (of 5) Condition (appearance): 4 (of 5) Sheet size: 36 x 52 cm Totalizer: 38,5 Million impressions Available from: Immediately available Machine is: on Stock stand... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Bbvstasdim ACCURPRESS 717512 Hydraulic Press Brake -- Capacity 175 ton x 144". -- Distance between housing 124". -- Stroke 8". -- Throat 10". -- Open height 14". -- Closed height 6". -- Speeds 90/17/180 IPM. -- Back gauge range 24". -- Motor 20 HP. -- Dimensions 150" x 52" x 92" high. -- Weight 24,000 [...] with: -- Accurpress AP2 X,Y CNC Control, Manual Z. -- ETS pedestal. -- Die rail. more
4
press force approx. 30 tons passage between the stands 950 mm Crpa0ar installation height max. 900 mm installation height min. 250 mm stroke of ram 250 mm extendable press bed press bed 700 m 700 mm operating pressure max. 450 bar - pressure adjustable diameter of ram 170 mm working height approx. 880 mm electrical data 400 V / 1.1 KW space requirements width - 2,200 x depth - 1,400 x height - max. 2,700 mm weight approx. 1,000 kg more
6

Press Balconi 2DMRF315

AmsterdamNetherlands dealership location
6220 km
1998
used
[...] R.: 1800 [...] B.: 1000 mmMax. Daylight: 590/490 mmStroke: 280 mmSpeed: 8-40 SpMBed: 1780 x 1300 mmRam: 1780 x 1300 mm with ?DIMECO? 2381/DFPS /?SOPREM? S2381/DFPS/B3M Decoiler; ?DIMECO? 1690-11-C-VV-B3MR-TSF-H2/SOPREM 1690/11/BVV Straightener?GPA-JAKOB? TransfersystemT2B-20CNC; Coil Feeder; ?IMCO? Press Control; ?SIEGFRIED? Tool Control Bbsrujqxhb more
2

Hydr. pressbrake MENGELE H 160-3

D - 77815 BühlGermany dealership location
6593 km
1987
used
pressure 160 t chamfer lenght 4000 mm distance between columns 3060 mm control FORTRON CNC 10 H 4 throat 280 mm 7cb0ak3ac stroke 250 mm dayligth 500 mm table length 4050 mm table width 280 mm feed down 70 mm/sec feed up 68,4 mm/sec working feed 9 / 3,5 mm/sec operating pressure max. 205 bar oil volume 400 l total power requirement 19,5 kW weight of the machine ca. 20,8 t Acc.: programmable back gauge, upper and lower dies, table extensions more
6

Press HEIDELBERG GTO 52+NP 1 color

More Heidelberg Gto 52
St.Leon-Rot bei HeidelbergGermany dealership location
6602 km
1991
used
Machine type: GTO 52+NP Condition (technical): 4 (of 5) Condition (appearance): 4 (of 5) Sheet size: 7778tso 36 x 52 cm Totalizer: 43 Million impressions Available from: Immediately available Machine is: on Stock WEKO... more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. H3370cvt ACCURPRESS 7175-12 CNC Press Brake -- Tonnage 175 ton -- Overall length of bed and ram 144" -- Distance between housings 124" -- Ram stroke 0 to 8" -- Throat 10" -- Open height 14" -- Closed height 6" -- Bed height 34" -- Approach speed 90" /minute -- Pressing speed 17" / minute -- Return speed 180" minute -- Motor 20 HP / 1760 RPM -- Approximate dimensions 178" x 66" x 94" high -- Approximate weight 24,000 [...] with: -- Ac... more


belt press
every day

New machines via email!

Be informed!

to

to

Change search
BELT PRESS
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,49 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close