Used Maurer Stages for sale (2,819)

Condition: good (used), functionality: fully functional, Maurer-Atmos Smoking Chamber for 3 Trolleys Manufacturer: Maurer-Atmos Device type: Smoking and cooking chamber with friction smoke generator The Maurer-Atmos smoking chamber is designed for thermal processing (smoking, drying, cooking) of meat, fish, and sausage products. Equipped with a friction smoke generator, this unit allows for both hot and cold smoking, ensuring excellent product quality, color, and aroma. Capacity: 3 smoke trolleys Godpfxsxtvh Io Akyebu Internal dimensions: 3100 × 1100 × 2000 mm Overall dimensions: 4000 × 1800 × 3300 mm Smoke generator type: Friction smoke generator The Maurer-Atmos chamber is a reliable, industrial solution for meat processing plants and food processors, enabling uniform smoking and thermal processing of up to three trolleys simultaneously. The use of a friction smoke generator allows for efficient consumption of smoking material and consistent, high-quality results.

Condition: used, Used approximately 13,400 litre Inox-Maurer AG stainless steel reactor body. Unit has an approximately 770 litre external coil. Unit is rated 2.0 / -1bar internal operating at 200degC. External coil is rated 16.0bar operating at 200degC. Unit has an internal material of construction of 1.4435 and external coil of 1.4306. Specifications: Capacity: 13,400 L Internal Pressure: 2 bar Gedpfjy Ryrnjx Akyebu Internal Temperature: 200°C Jacket Pressure: 16 bar Jacket Temperature: 200°C Legs/Lugs/Mounting Ring: Mounting Ring

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, machine/vehicle number: 755/B, type of input current: three-phase, total width: 1,020 mm, total length: 1,450 mm, total height: 2,050 mm, input current: 5 A, AC 710 industrial cylinder boring and surfacing machine Production era: 1970s–1980s industrial design This is a high-precision engine block cylinder boring and surfacing machine, developed primarily for the reconditioning and oversize boring of internal combustion engine cylinders. The machine belongs to Berco's classic industrial series of engine rebuilding equipment, featuring a massive cast-iron frame and a high-rigidity spindle system. The equipment is suitable for the precise boring of engine blocks, cylinder liners, and industrial cylinders. The stable T-slotted table and long stroke length allow for the machining of large engine blocks. The machine features a mechanical, multi-speed spindle drive and a precision feed system, ensuring uniform bore quality. Key technical specifications: Gbedpfx Aez Rw N Hekysu • Minimum boring diameter: approx. 31 mm • Maximum boring diameter: approx. 180 mm • Spindle speed range: approx. 155 – 873 rpm (multi-stage) • Feed rates: approx. 0.04 – 0.076 – 0.128 mm/rev • Main motor power: approx. 1 HP • Table longitudinal travel: approx. 1000 mm • Table cross travel: approx. 100 mm • Effective table size: approx. 1100 × 400 mm • Head vertical travel: approx. 700 mm • Maximum boring depth: approx. 480 mm • Maximum working height on the table: approx. 820 mm • Distance from spindle centerline to column: approx. 305 mm • Machine weight: approx. 1500 kg • Stable cast-iron machine frame and precision guideways The machine has been thoroughly cleaned, checked and adjusted;ready to work.

Condition: used, Maurer cooking chamber. Twin trolley. 6 trolleys available Gsdpfxjk Uqths Akyobu More photos and full specifications: /

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 8018, type of input current: three-phase, total width: 1,100 mm, total length: 1,460 mm, total height: 2,050 mm, input current: 8 A, AC 400 industrial cylinder boring and surfacing machine Production era: 1970s–1980s industrial design It is a high-precision engine block cylinder boring and surfacing machine, developed primarily for the reconditioning and oversize boring of internal combustion engine cylinders. The machine belongs to Berco's classic industrial series of engine rebuilding equipment, featuring a massive cast-iron frame and a high-rigidity spindle system. The equipment is suitable for the precise boring of engine blocks, cylinder liners, and industrial cylinders. The stable T-slotted table and long stroke length allow for the machining of large engine blocks. The machine features a mechanical, multi-speed spindle drive and a precision feed system, ensuring uniform bore quality. Key technical specifications: • Minimum boring diameter: approx. 31 mm • Maximum boring diameter: approx. 180 mm Gjdpjz Rwkqjfx Akysbu • Spindle speed range: approx. 155 – 873 rpm (multi-stage) • Feed rates: approx. 0.04 – 0.076 – 0.128 mm/rev • Main motor power: approx. 1 HP • Table longitudinal travel: approx. 1000 mm • Table cross travel: approx. 100 mm • Effective table size: approx. 1100 × 400 mm • Head vertical travel: approx. 700 mm • Maximum boring depth: approx. 480 mm • Maximum working height on the table: approx. 820 mm • Distance from spindle centerline to column: approx. 305 mm • Machine weight: approx. 1500 kg • Stable cast-iron machine frame and precision guideways This is a good working machine. If you would like, you can try it at our workshop.

Condition: good (used), There is 5 smokehouse ,cooking and intensive cooling unit. Gbjdpfx Ajz Atnkjkysu

Condition: new, functionality: fully functional, Year of construction: 2026, Equipment: CE marking, Here, you see a pallet rack system designed for space-saving storage of sheet metal in sizes ranging from 1x2 meters to 6x2 meters. This is a heavy-duty steel welded construction. Storage weight: 3000 kg All shelves are 100% load-bearing. Easy loading and unloading of sheet metal. Gbedpfozrgq Rex Akyeu Automation connections to laser and punching machines are possible. Advantages at a glance: - Stores 2.5 times more sheet metal than cantilever racks in the same footprint - Neat and organized appearance - No more damaged sheet metal - Large insertion width between the pallet and the frame - Pallets are open on the side, allowing even thin sheet metal to be removed without a crane - Depalletizer can be moved freely (see video) - Standard hot-dip galvanized - CE marking and static calculation - The fire load in the building is reduced as no more pallet wood is required. Request a non-binding offer. The rack system will be manufactured to your required height and length.

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, type of input current: three-phase, total width: 1,050 mm, total length: 3,800 mm, total height: 1,750 mm, input current: 5 A, Schou L-2500 Heavy duty universal line boring machine Manufacturer: Schou & Co. Ltd., Copenhagen, Denmark Production era: Late 1970s – mid-1980s (Heavy Duty series) Design: Precision bore machining equipment for line boring engine blocks and gear casings Maximum boring length: 2500 mm Boring diameter range: 25 mm – 200 mm (depending on accessories) Table length: 2500 mm Spindle speed: Infinitely variable or multi-stage adjustable hydraulic/mechanical drive Feed: Automatic, fine-adjustable longitudinal feed for micron-level surface finish Frame structure: Vibration-free, special cast-iron bed with integrated support bridges Machine weight: approx. 1800 – 2200 kg (depending on equipment) Gbsdpfxjz Rw T Eo Akyeu 2. Accessories and equipment • Complete boring bar set (in various diameters and lengths) • Precision clamping blocks and support units for block alignment • Centering bridges and dial indicator measuring devices • Tool setting micrometer • Integrated control panel with emergency stop • Boring grinder / milling auxiliary unit (depending on model)

Year of construction: 2013, operating hours: 2,500 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 0445-30/100x4 AA-2, Four-stage cascade system for separating ferrous materials Working width: 1000 mm 4 magnetic drums Gjdpfxez Ap Rbe Akysbu 4 vibrating troughs Base frame As new, immediately ready for use Test run/trial with material possible by arrangement.

Condition: used, Year of construction: 2007, turning diameter 470 mm turning length 2500 mm control Siemens Sinumerik 840 D work height max. 1300 mm swing diameter over bed slide 750 mm swing over bed 780 mm diameter of quill 160 mm taper bore MK 5 tool numbers 48 weight of tools max. 15 kg tool length - max. 500 mm total power requirement 123 kVA weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 3,3 m C-axis: - Speed range - 30 rpm - Max. torque at rotary spindle (60% duty cycle) 930 Nm - Positioning accuracy 0.005 degrees Slide travel: Gedpfxoz R D Hlo Akyobu - X-axis 720 mm - Z-axis 4072 mm Rapid traverse: - X-axis 18 m/min - Z-axis 30 m/min Feed rates: - X-axis mm/min - Z-axis - mm/min Workpiece spindle: - Spindle head according to DIN 55026: A 11 - Through bore: 123 mm - Diameter in front bearing: 200 mm - Oriented spindle stop: 0–359 degrees Workpiece spindle drive with 2-stage gearbox: - Drive power at 100/60% duty cycle: 37/45 kW - Total speed range: 10–2,500 rpm - Number of speed ranges: 2 - Speed range I: 10–775 rpm - Speed range II: 20–2,500 rpm - Max. torque at 60% duty cycle: 2,083 Nm (up to 186 rpm) Equipment/accessories: - Forkardt power chuck with one set of hard and soft jaws each - Hydraulic steady rest - Tailstock with center point - Chip conveyor - Coolant device - 5 HSK 100 A holders - Technical documentation

Condition: used, Industrial Maurer smoking chamber made of stainless steel, designed for thermal processing and smoking of meat products such as sausages, bacon, and ham. The chamber is equipped with a digital control panel used to manage temperature and processing time. The door is large and insulated to maintain a stable temperature during operation. An emergency stop button is also located on the front of the machine for safety. The interior of the chamber is also made of stainless steel and is designed to ensure even distribution of heat and smoke during the smoking process. Inside the chamber there is an air circulation system as well as a unit for generating smoke from sawdust or wood chips. The machine is of industrial construction and is used in the production of smoked meat products. Technical specifications: Gsdpfxsyt E E Ds Akysbu 1 trolley digital control panel insulated door emergency stop button air circulation system smoke generation system for sawdust or wood chips used for smoking and thermal processing of meat products Overall dimensions: 120x130x230cm

Condition: used, Year of construction: 2023, Filter dimensions: 1,220x610mm, air flow rate: 1,550m³/h, cleanroom class: ISO 5 (high-purity working environment), high-efficiency filter: H14 (99.995% filtration efficiency), connected load: 510W, length: 977mm, width: 453mm, height: 374.5mm, weight: 30kg, equipped with EC fan, 8-stage adjustable air flow, regularly maintained, last successfully certified on March 1, 2023, in perfect working condition, ready for immediate operation, no outstanding maintenance, on-site inspection is possible. Gbedpjz R A N Ejfx Akyeu

Year of construction: 2024, condition: used, Max. volume flow rate: 1,260m³/h, possible number of filter stages: 1, 2, operating voltage: 3x 400V, PE, N, frequency: 50Hz, rated power: 1.8-2.9kVA, max. rated current: 2.7-6.6A, upstream fuse: 16A, mains connection three-phase AC: 400V, max. rated power: 2.9kVA, max. rated current: 6.6A, upstream fuse: 16A, control cabinet protection rating: IP54, max. differential pressure: 2,380Pa, compressed air quality: factory-supplied, oil-free, dry, max. inlet operating air pressure: 8bar, operating temperature: 5-40°C, weight: 165kg. On-site inspection is possible. Gbodpfx Aez R A Nljkyou

Year of construction: 2009, condition: used, X-axis travel: 360mm, Z-axis travel: 980/1580mm, rapid traverse X/Z: 15/24m/min, max. turning diameter: approx. 500mm, max. swing diameter: 800mm, spindle nose: A11, bar capacity: 110mm, power (100%/40%): 22/33kW, torque gear stage 1: 175/263Nm, torque gear stage 2: 700/1,050Nm, turret type: servo turret, tool stations: 12, tool holder: VDI 50, number of driven tools: 12, driven tool speed: 4,000rpm, power (100%/40%): 5/9.6kW, axial torque (100%/40%): 18/35Nm, radial torque (100%/40%): 15/28.8Nm, hydraulic tank: 11l, central lubrication reservoir: approx. 2-3l, mains connection: 3/PE~ 400V, frequency: 50/60Hz, operating current (I_B): 63A, rated current (I_N): 80A, length: 3,250mm, width: 1,980mm, height: 2,090mm, weight: 8.5t, operating hours: 27,271h, including Spinner SERVO-LOAD 110 1500 bar feeder and documentation. On-site inspection is possible. Gbsdpjz R A I Ujfx Akyju

Condition: good (used), Year of construction: 1997, For sale are 2 identical Atlas Copco screw compressors. Manufacturer: Atlas Copco Type: ZR 75 / 10 Serial number: AIF 042705 = Compressor 1 Serial number: AIF 053082 = Compressor 2 Operating hours: 94620 h = Compressor 1 Operating hours: 96461 h = Compressor 2 Voltage: 400 V Power (kW): 76 Air flow rate in m³/min: 10.4 Gsdpfx Ajz Rntiskyebu Max. air pressure in bar: 10 Both compressors have been serviced by the manufacturer according to the maintenance schedule (reports available). After approximately 60,000 operating hours, a stage replacement was carried out on both units. The motor was also replaced on both compressors. The units are in good condition. Price: €6,900 per compressor Inspection is possible and encouraged (93499 Zandt). We apologize for the small number and poor quality of the photos; I will provide additional photos of both compressors shortly.

Condition: excellent (used), Year of construction: 2021, operating hours: 4,689 h, functionality: fully functional, machine/vehicle number: 103, overall weight: 32,000 kg, power: 390 kW (530.25 HP), conveyor belt speed: 2,000 mm/s, fuel tank capacity: 950 l, The machine is equipped with a new roller! The following work was carried out on the machine: Machine washed and cleaned Roller disassembled and bearing shield separated from the roller Rack, limiter, and comb attachments disassembled Cooling and air intake system, front door, and soundproofing register disassembled and reassembled Roofs disassembled and reassembled Various brackets repaired and re-welded Oil pan replaced Exhaust system completed Openings in the housing retrofitted with labyrinth sealing New tools mounted on the drum and rack Roller mounted Cable harnesses repaired TECHNICAL DETAILS Type: Size L-C3 VARIOMAT Roller teeth: 42 pieces Limiter: Size L, 20 pieces Roller: New Loading height: 3,307 mm Loading protection: On both sides Longitudinal belt length: 4,450 mm Longitudinal belt width: 1,000 mm Rear belt length: 8,500 mm Rear belt width: 1,200 mm Discharge height: 5,050 mm Conveyor speed: 2 m/s Gsdpez Rqcmjfx Akyebu MACHINE DETAILS Engine type: Diesel-hydraulic Engine: MTU 6R1300 Rated power: 390 kW Engine speed: 1,700 rpm Emission standard: EU Stage V Fuel tank: 950 l Additional hydraulic connection: 30 l/min Additional hydraulic connection: 70 l/min Roller drive: 380 kW Drive system: VARIO Hydraulic system: Load-Sensing system Operating hours: 4,689 h Chassis: 3-axle semi-trailer chassis unit Drive: Hydraulic Dimensions & Weight Dimensions in working position (L x W x H): 16,786 x 2,500 x 5,050 mm Dimensions in transport (L x W x H): 9,971 x 2,500 x 3,893 mm Total weight: 32,000 kg Operating hours: 4,689 h EQUIPMENT Basic package Inventhor Type 9 Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW Load-Sensing system Radio remote control, complete Large side GRP maintenance doors easy-to-maintain engine compartment with LED light hydraulically reversible fan wheel loading protection on both sides Fire extinguisher Maintenance ladder Toolbox acoustic start-up warning Doppstadt telematics system 3-axle semi-trailer chassis unit Shredding system Size "L-C3"-VARIOMAT Size "L" - "Limiter" (20 pieces) hydraulic drive Watering on both sides Rear belt 8.5 m, 1,200 mm wide Overbelt magnet neodymium Frame for overbelt magnet neodymium Central lubrication with pump LED lighting package engine compartment and rear Note: The Doppbasket system can be retrofitted for an additional cost.

Condition: used, mileage: 434,035 km, power: 213 kW (289.60 HP), first registration: 12/2013, fuel type: diesel, number of seats: 38, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until the conclusion of the sale, subject to errors, typos, and prior sale: MAN Lions LE Ü (A78) intercity bus 40+40+1+1 (Vehicle No. 140) First registration: December 16, 2013 431,053 km mileage Engine: 6,871 cc 213 kW / 290 hp Permissible gross vehicle weight: 19,500 kg Unladen weight: 11,225 kg Payload: 8,275 kg Overall length: 11,895 mm x overall width: 2,550 mm x overall height: 3,200 mm Fully automatic transmission Gjdpfez Rrn Djx Akysbu Retarder: 3 stages Cruise control Auxiliary heater Electrically adjustable and heated mirrors Additional heater + auxiliary heater + driver’s climate control Isri comfort driver’s seat, air-suspended Seats: 40+40+1 x wheelchair/pram + 1 driver Lawo ICU 400 with USB Single door in the front Double door in the rear Tires: 295/80R22.5, front approx. 90%, rear approx. 40/40%, drive axle approx. 60/60% Additional headlights Price: €11,000.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties is the local court of Ludwigslust for disputes up to a value of €10,000; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, spindle mount: MK 4, total width: 600 mm, total length: 1,135 mm, total height: 2,460 mm, table width: 600 mm, table length: 600 mm, overall weight: 950 kg, Equipment: documentation/manual, Continuous drilling capacity | steel 45 mm Gsdpfjz Rlkxox Akyebu Maximum drilling capacity | steel 50 mm Maximum drilling capacity | cast iron 60 mm Maximum drilling depth 230 mm Thread cutting | steel M42 Thread cutting | cast iron M50 Overhang 375 mm Work table dimensions 600 × 600 mm Maximum table load 400 kg T-slots | slot size 18 mm Spindle taper MK4 Machine feed of the spindle 6 / 0.05 - 0.3 mm/rev Spindle speed 54 – 2090 rpm Continuously variable speed No Number of speed stages 18 Maximum distance between spindle and table 800 mm Maximum distance between spindle and base 1300 mm Column diameter 200 mm Base dimensions 600 × 520 mm Power input 2400/3000W Electrical connection 400V Dimensions (W × H × D) 600 × 2460 × 1135 mm Weight 950 kg

Condition: excellent (used), Year of construction: 2012, The FORMAX F-6 burger forming machine is an automatic forming machine from the FORMAX brand (Provisur Technologies), designed for producing burgers, patties, and other formed products from meat, poultry, and non-meat ingredients. The set consists of the forming machine and a conveyor that receives the finished products, and includes a wide selection of round and oval molds from 45 to 200 g as well as spare parts. How does the FORMAX F-6 burger forming machine work? Raw material goes into the hopper, from where a feed screw carries it to the forming system. A high-speed mold plate fills the molds with the mass and gives the products the set shape and weight, and a pneumatic knock-out system places the finished portions on the conveyor. Changing the product range means swapping the mold, which allows quick changeovers between round and oval burgers of different diameters and weights. The machine is operated from a simple pushbutton panel. Key advantages of the FORMAX F-6 burger forming machine The compact construction and quick mold changes make the forming machine well suited to plants that produce different products in short runs. High repeatability of burger weight and shape results in uniform quality and easier portioning and packing. The set with a conveyor receiving the finished products allows the forming machine to be connected straight to subsequent stages of the line, such as breading, freezing, or packaging. The wide choice of molds supplied, from 45 to 200 g, and the included spare parts reduce downtime and make it possible to start production immediately. Technical specifications of the FORMAX F-6 burger forming machine Manufacturer: FORMAX Model: F-6 Power supply: 14 kVA, 380 V, 3 phases, 50 Hz Capacity: approx. 450 kg/h Hopper capacity: approx. 136 kg Included: spare parts Dimensions of the whole set: 5000 x 800 x H: 1770 mm Forming machine dimensions: 2700 x 800 x H: 1770 mm Conveyor dimensions: 2040 x 560 x H: 1200 mm Available molds (dimensions and weight) Round molds: Gbjdpfx Akez Rw Shoyju 90 mm (45 g) 90 mm (50 g) 105 mm (80 g) 127 mm (120 g, 150 g, 200 g) 130 mm (190 g) Oval molds: 125 x 107 mm (90 g) 142 x 119 mm (approx. 150 g) 156 x 132 mm (180 g, 200 g) Application of the FORMAX F-6 burger forming machine The FORMAX F-6 forming machine is used in meat and poultry processing plants for producing beef and poultry burgers, patties, formed minced meat, and nuggets. It also works well for non-meat products and in small and medium plants that need a flexible, compact forming machine.

Condition: excellent (used), Year of construction: 2016, operating hours: 1,158 h, functionality: fully functional, machine/vehicle number: 16-020, overall weight: 450 kg, total length: 1,360 mm, total width: 800 mm, total height: 1,800 mm, fuel type: electric, volume flow: 33 m³/h, pressure (min.): 330 bar, Equipment: compressor, This offer concerns a beautiful Comptrade CTP-S-550E3 diving compressor. The compressor comes with an external filling panel for diving cylinders (5 x 300 bar and 1 x 200 bar). The lever valves were replaced in 2025/2026. I am also including a 50-liter air cylinder. This is a great set, practically ready to use. You just need to connect the electrical wires to the filling panel, and you can start working immediately!!! PERFORMANCE: 550 liters/min Engine speed: 1250 rpm Dimensions: 136/80 cm (width/depth), 180 cm (height) Weight: 450 kg Rated power: 11 kW RUNNING HOURS: Only 1158 hours I have my own transport available. Price from 96-100 EUR, starting from Skierniewice, Poland, to your location, plus 0.33 EUR per kilometer one way. TECHNICAL DATA OF THE COMPRESSOR Medium: breathing air according to DIN 3188 / EN 12021: 2014 Inlet pressure (bar, absolute pressure): 1 + 0.2 Nominal working overpressure (max. bar): 420 Number of compression stages: 4 Number of cylinders: 4 Diameter of 1st stage cylinder (mm): 130 Diameter of 2nd stage cylinder (mm): 60 Diameter of 3rd stage cylinder (mm): 32 Diameter of 4th stage cylinder (mm): 14 Piston stroke (mm): 50 Interstage overpressures: 1st stage (approx. bar): 2.5 – 3.5 2nd stage (approx. bar): 15 – 17 3rd stage (approx. bar): 70 – 75 4th stage (approx. bar): 225 – 400 Air-cooled Lubrication: oil pump Oil quantity (l): 3.8 Gjdpjz Rmvcjfx Akysbu Type of oil: synthetic oil Permissible ambient temperature: +5°C to +45°C Permissible inclination: 5° Frequency of condensate removal: every 10–15 minutes DRIVE MOTOR: three-phase induction motor (E3) 3×400 V / 50 Hz, 2900 rpm, B3 design, IP 55 Equipment: compressor and motor mounted on a frame equipped with vibration damping elements; the lightweight frame design allows for easy replacement of the drive unit. micron-type inlet filter forced lubrication (oil pump) interstage coolers, final cooler, final mechanical separator for removing oil-water condensate visual oil level indicator on the compressor block final safety valve (set at 225 bar or 330 bar), check valve, thermal motor protection switch, automatic star-delta starting system FILLING PANEL WITH SIX OUTLETS (5 x 300 OR 1 x 200 BAR) AUTOMATIC SHUT-OFF SYSTEM (AUTO-STOP) AUTOMATIC CONDENSATE DRAIN SYSTEM removal of condensate from all interstage separators and the final separator during compressor operation integrated pressure relief starting system (automatic drain upon each device shutdown) condensate tank with a capacity of approximately 5 liters noise dampers, timer to optimize the frequency of condensate draining FILTRATION SYSTEM F 2400 transparent COMP TRADE filter cartridge with extended life and saturation indicator; three-stage filtration (drying, neutralization, microfiltration) air quality in accordance with DIN 3188 / EN 12021: 2014 standards filling: MS-AC-MS (ensures air quality in accordance with DIN 3188 / EN 12021: 2014) filter capacity (air volume): 2400 m³ (at an ambient temperature of 20°C) COMPTROL 1 oil level control system with automatic shut-off function and reset button (activation when the minimum oil level is reached in the compressor block); oil level indicator located at the front of the frame. COMPTROL 2 temperature control system with automatic shut-off function and reset button (activation when the maximum temperature is reached in the last stage of compression)

Condition: excellent (used), Year of construction: 2018, Storage platform with bolted construction Can be expanded modularly at any time Platform supports made of galvanized Sigma profiles Permissible surface load: 500 kg/m² Storage platform Manufacturer: BITO Gbedpfxsv Nkc Nj Akyou Type: C-slot profile Year of manufacture: 2018 Approx. 187 m² Floor + 1 storage level = approx. 374 m² Footprint: 7,170 x 26,080 mm 38 mm tension plate covering: white/grey Load capacity: 500 kg/m² Level height: 2,540 mm each Passage height: 2,250 mm Stairs and walkways are not included in the platform The lighting is also not included in the scope of delivery You can find more new and used items in our shop! International shipping costs available upon request!

Year of construction: 2002, condition: good (used), functionality: fully functional, An ultra reliable 130 / 160mm OMP Prealpina plastics extruder, supplied by ourselves back in 2002. I have know the extruder history since new as i was the supplying agent originally. Originally supplied to reprocess confectionery Polypropylene films with 100% heavy print on the film , it performed very well in degassing and compounding the plastics materials till that contract expired. The extruder is a cascade version , allowing significant extra gas venting and polymer mixing, by utilizing a second short barrel 160mm extruder to deliver molten and clean plastic to a die face cutter, followed by a centrifuge to dry the pellet. The line has recently been fitted with an ultra efficient FIMIC fully automatic screen filter, providing probably the most efficient filtration available to plastics recyclers. being a cascade configuration , with superior filtration and venting , the line is most suitable for difficult plastics films or fibre recycling. The line has a 7 cu metre silo feeding directly into a force feed conical delivery system to the feed zone of the 130mm extruder. There is a master batch/ additive feeder included. The line was sold to a company in Lituania from its earlier owner in the UK in 2022 , but the plastic feedstock thought to be available in Lithuania never materialised. The line has been stored since, and is still dismantled and able to be shipped immediately to a new buyer. Gjdpfx Aszwhtdskyobu

Year of construction: 2020, condition: excellent (used), Stationary Piston Compressor Aircraft AIRPROFI 703/270/10 V Used: Year of manufacture 2020 - Top condition - Stationary compressors with a vertical 270 l tank offer maximum performance in a compact space. Robust design and best quality Fully automatic on/off operation Equipped with all safety devices Completely ready for connection Fifteen-year guarantee against rust on the internally and externally hot-dip galvanized compressed air tank Gsdpfx Aksz Rq Eusyjbu Quality electric motor High-quality electric motor with high starting torque is equipped with a motor protection switch Starting capacitor and starting relief valve ensure easy starting Standard equipped with a phase inverter for easy manual reversal of the direction of rotation Compressed air compression via high-performance HOS unit The starting relief valve ensures easy, pressure-free starting The two-cylinder high-performance unit made of gray cast iron and the low speed guarantee particularly quiet and low-vibration operation; this ensures a long service life due to minimized wear Optimal lubrication of the compressor for high service life and reliability Equipped with a high-quality intake filter Aftercooler with large cooling fins results in a low tank inlet temperature and less moisture in the compressed air to protect the compressed air tools Additionally with an intercooler to the aftercooler Corrosion-resistant valve plates for improved heat dissipation and longer service life of the compressor Optimal cooling of the compressor by a large fan wheel and a cooling air deflector on the cylinder Stable metal belt guard for optimal protection of the components and for high user safety No vibration breaks in the compressed air supply line to the tank due to flexible armored hose with heat protection High-quality drive belt Powerful and efficient drive The toothed drive belt facilitates starting, improves running smoothness and power transmission, and reduces power consumption by up to 30% Stable metal belt guard Operation on the service block Equipped with a high-quality CONDOR pressure switch with a robust push-button function for fully automatic on/off operation Air outlet on the service block via a comfortable safety quick coupling Only fixed screw connections on the service block, no hose connections High-quality tank with permanent rust protection Air outlet ¾" Length (product) approx. 780 mm Width/Depth (product) approx. 680 mm Height (product) approx. 1870 mm Weight (net) approx. 152 kg Automatic pressure switch CONDOR Drive transmission V-belt, toothed Material of compressed air line Flexible armored hose with heat protection Compressed air outlet Ball valve Condensate drain Condensate drain valve Compressed air tank Internally and externally hot-dip galvanized with a fifteen-year guarantee AD 2000 compliant yes Tank base Vibration dampers Connection plug 400V CEE plug with phase inverter Connection voltage 400 V Mains frequency 50 Hz Output power 4 kW Input power 4.81 kW Sound pressure level Lp 83 dB(A) Explanation of sound pressure level Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Compressor system HOS Intake capacity approx. 650 l/min Filling capacity approx. 520 l/min Explanation of filling capacity at 6 bar working pressure Number of cylinders 2 Number of compression stages 2 Compressor speed 950 min¯¹ Maximum pressure 10 bar Tank capacity 270 l Location: available from stock in 54634 Bitburg - immediately available -

Condition: used, Manufacturer: Maurer Type: Smoke chamber for 3 trolley Electric heating 72 kW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper; Cleaning: foam cleaning Godpfx Ajq E Ry Rokyjbu Smoke feeding: on customer request Smoking material: wood cheaps Without after-burning system Installation dimensions of the machine in cm: Width: 158 Length: 350 Height: 270 Trolley dimensions in cm: 100x100x200

Condition: used, Manufacturer: Maurer Type: Smoke chamber for 4 trolley Gedpfjq E Ry Ujx Akyebu Electric heating 96 kW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper; Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood cheaps Without after-burning system Installation dimensions of the machine in cm: Width: 158 Length: 455 Height: 270 Trolley dimensions in cm: 100x100x200