Used Belt Filter Press for sale (41,471)

Year of construction: 2003, Condition: good (used), Manufacturer: Limus Kft (ALTERRA Kft) Type: LIM-1.5/a Year of manufacture: 2003 Performance: 2-4 m³/h Engine: Manufacturer: Sew-Eurodrive Power: 0.37 kW Electrical data: 50 Hz, 220 V Belt press dimensions: 2150 x 950 x 1900 mm P0Zfo3Lp With stand: 2150 x 1850 x 1900 mm

Year of construction: 2021, Condition: as good as new (ex-display), Functionality: fully functional, Machine/vehicle number: 210712574, Membrane filter presses (3 units) never used. Full set with motors and self-cleaning system. Uobtkpp2V7 Few scratches.

Condition: excellent (used), Year of construction: 2005, Working width: 900 mm, Input voltage: 400 V, Equipment: Compressor, Documentation/Manual, Name: Belt press Manufacturer: Klein Type: SNP900-14 Year built: 2005 Operating voltage: 400 V Bandwidth: 900 mm Engine power: 0,75 kW Throughput: 6 - 9 m3/h and 180 - 300 kg-TR/h Dimensions: L 4540 x W 1740 x H 1920 mm Empty weight: Approx. 4.400 kg Technical doc.: Yes Message: It is practically like new Accessories: Polymer system, control cabinet, washing water pump, compressor, discharge screw and technical documentation Condition: Used very good Uttk7Itk0L Price: On demand

Condition: used, Year of construction: 2023, Operating hours: 1,851 h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Dpkru2 Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2024, Condition: new, Belt press PT-1050 is a device used for pressing apple must. The process takes place between the belt of the device and the appropriately spaced rollers of the press. The squeezed juice is pumped into the pasteurizer tank. The whole device is made of stainless steel AISI304 Cmbgemje TECHNICAL DATA: - capacity : up to 5900kg apples/hour - yield of juice from squeezed apples up to 75% - installed power :3,4 kW 230V - water consumption ; up to 6 l/min - weight ;2000kg - belt width 1200 mm - belt speed adjustable - juice tank with sieve mesh fi= 2mm Ubq2Aqa3Gz - juice pump

Year of construction: 2011, Condition: as good as new (ex-display), Functionality: fully functional, NEW FILTER PRESS WITH AUTOMATIC UNLOADING OF 10M2 OF FILTRANSTE® FABRIC SURFACE AREA Dptfjf

Condition: refurbished (used), Year of construction: 1990, div. Chamber filter presses from Rittershaus & Blecher, Netzsch and Passavant to be handed over, plate format 1200 x 1200 and 1500 x 1500 mm, from 40 - 145 PP plates, content from 1000 - 4500 liters, length approx. 6 - 13.6 m, all presses have to be refurbished are then sold with a 1 year guarantee, a piston Membrane pump for loading can also be offered, location is 58762 Altena O7Yz7

Year of construction: 2024, Condition: new, Our belt presses are equipped with two large pressing rollers, which means that the pressing process takes longer and the machine is pressed more gently. The result is high quality juice that is free of turbidity and foam. Pneumatic belt tensioning and automatic belt control ensure higher quality. The belt press is equipped with an automatic brush cleaning system. You do not need a high-pressure cleaner for belt cleaning, as the belt is cleaned with six special water nozzles. All you need is a compressor with a pressure capacity of 8 bar and a ½" water connection for cleaning. Thanks to the special nozzles, you use less water and have lower operating costs. The open system ensures quick cleaning. The system can be cleaned within a few minutes. Technical data: - Nominal capacity: 950 kg/h - Power requirement: 1 kW, 230 V, 16 A - Material: Wnr. 1.4301, AISI 304 stainless steel - Compressed air requirement: 50 L/h 6 bar - IP65 electronic control cabinet - Juice yield: Up to 75% - Fully automatic and infinitely variable regulation of the belt speed - User-friendly - Easy to clean - Rollable machine feet Dimensions Length: 2230mm Width: 1450mm Height: 1250mm Height of intake: 1240mm Height pomace ejector: 500mm Height juice outlet: 370mm Blox0Ledva Weight: 540 kg

Condition: used, Year of construction: 1992, Filter area: 156 m², Filter pressure: 15 bar, Pressure: 385 bar, Cake thickness: 30 mm, Total width: 1,880 mm, Total length: 8,950 mm, Total height: 1,900 mm, Empty load weight: 13,300 kg, Chambers: 95, Equipment: Documentation/Manual, Name: Industrial filter press used Manufacturer: Netzsch Type: 1000/96 Year built: 1992 Construction form: Bridge beam press Filter pressure: 15 bar Press content: Approx. 2367 liters Cycle: Closed Filter area: Approx. 156 m2 Plate size: 1000 x 1000 mm Number plates: 96 Plate material: Polypropylene Plate transport: Automatic Filter cloth washer: No Cake thickness: 30 mm Closing pressure: 385 bar Dimensions: L 8.950 x W 1.880 x H 1.900 mm Empty weight: 13.300 kg Technical doc.: Yes Accessories: A control cabinet, a hydraulic system Condition: Second hand Dpgqyf Price: On demand

Condition: defective spare-parts repository (used), Year of construction: 1995, Functionality: not functional, Machine/vehicle number: PEE I 400, Pressing force: 400 t, Ram stroke: 140 mm, used eccentric press incl. functional belt device, details according to type plate, inspection possible at any time Cgi0Ahi9Co Main shaft and drive motor are to be replaced/renewed

Year of construction: 2024, Condition: new, Belt press PT-1050 is a device used for pressing apple must. The process takes place between the belt of the device and the appropriately spaced rollers of the press. The squeezed juice is pumped into the pasteurizer tank. The whole device is made of stainless steel AISI304 Cmbgemje TECHNICAL DATA: - capacity : up to 1500kg apples/hour - yield of juice from squeezed apples up to 75% - installed power :1,4 kW 230V - water consumption ; up to 4 l/min - weight ;1000kg - belt width 700mm C93Av8A - belt speed adjustable - juice tank with sieve mesh fi= 2mm - juice pump

Condition: excellent (used), Year of construction: 2023, Functionality: fully functional, Machine/vehicle number: K-SH_E/R2/470-25-20-Z-O-15, Filter area: 7.02 m², Filter pressure: 15 bar, Pressure: 400 bar, Cake thickness: 25 mm, Total width: 980 mm, Total length: 1,860 mm, Empty load weight: 765 kg, Operating pressure: 450 bar, Chambers: 20, Input voltage: 400 V, Clamping force: 313 N, Chamber filter press 470 x 470 with electrohydraulic shutter 20 chambers with open outlet, ( KD 25 ) Operating pressure 16 bar 1. frame Solid steel frame consisting of solid upright plates, lateral round bars and solid pressure plate. pressure plate. The uprights are encased in PVC pipes, which serve as a slideway for the filter plates and the pressure plate. pressure plate. The pressure plate is laterally mounted on plastic rollers. The upright plate is fixed to the floor on the turbidity inlet side. The stand plate is mounted loosely on plastic glides on the hydraulic side. Paint finish: - sandblasted SA 2.5 - Primed with 2-component primer - Top coat with synthetic resin textured paint, silk matt (RAL 6028 pine green) Turbidity inlet: Flange connection to DIN 2501 PN 16 DN 40 2. hydraulic system The chamber filter press is equipped with a hydraulic system for the following functions - Press opening - Closing a) Hydraulic unit Electrically operated compact hydraulic unit with mounted 2/2-way valve for relief. With internal pressure relief valve preset to 480 bar. Closing pressure: 380 bar Delivery volume: approx. 1.9 l/min Motor power: 1.0 kW / 1400 1/min (3 x 400 V / 50 Hz) Dph8Zt b) Hydraulic cylinder Single-acting hydraulic cylinder with spring return, reinforced piston and rod guide for filter press operation. - Piston diam. 95 mm - Stroke 330 mm - Operating pressure 450 bar c) Connections Connecting lines between hydraulic unit and clamping cylinder as high-pressure hose connection. hose connection. 3. plate package Plate package consisting of: 19 chamber plates 1 head plate 1 end plate Filtration pressure 15 bar Press capacity 77.4 l Filter area 7.02 m² Design of the filter plates: Chamber plate 470 x 470 mm PP - with open outlet - with welded handles 4. drip tray and filtrate channel Two-part drip tray designed as a sliding tray with substructure made of stainless steel 1.4301 and support made of plastic PP. Support with edging on three sides. Filtrate channel made of PP (beige) Drain: Horizontal flange connection 5. safety devices The press is equipped with a protective circuit (two-hand circuit) which prevents the press from being automatically The press is equipped with a protective circuit ( two-hand circuit ) which prevents automatic closing of the press and the associated danger to persons. While the press is being closed, the operator is bound locally and cannot intervene in the working area of the filter press. The press can only be closed as long as both buttons remain pressed. If a minimum pressure is reached in the hydraulic circuit, an electrical self-holding function is established. The built-up closing pressure is automatically maintained by the hydraulic unit.

Condition: ready for operation (used), Year of construction: 1995, IMMEDIATELY AVAILABLE, MSE chamber filter press, overhauled in 2012, good condition, ready for immediate use, plate format 1200 x 1200 mm, 100 PP plates, 30 mm cake thickness, contents approx. 3000 liters of sludge content, automatic. Plate transport, center inlet, closed outlet via 4 corner holes Cpvibtldmm

Year of construction: 2024, Condition: new, Functionality: fully functional, Belt press POWERPRESS 300 is designed for pressing fruit, berry and vegetable mash. Fruit mash is supplied on the belt which presses it against shafts. The obtained juice flows into a small collection tank under the press with filtration sieve on top. Then the external pump or juice collection tank with pump transfers the juice from the press to a desired storage tank or straight to ROCKET pasteurizer for further processing. The pressing process is continuous. Capacity: 300 kg/h Dph3X9 The most cost-efficient belt press in the market! The most evolutionary feature of our Belt press POWERPRESS 300 is one huge pressing shaft, which lets the machine to maintain the longer pressing time (belt length is 4900 mm) and huge shaft dimensions squeezes the juice efficiently by saving the costs and space. The juice yield of apples using our belt press is ~65-75 %. The yield highly depends on freshness and variety of fruits. There is a filtration sieve integrated into the juice collection tank. Because of that the belt press 300 filtrates the juice even during the pressing stage providing cleaner and purer product. The belt press includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves service costs. Adjustable fruit inlet lever lets fruit mash supply onto the shaft easily. Crushed fruit mash can be supplied from MAXIMILL or straight from a bucket or basket. After work, belt press should be manually washed with a water stream. A full washing process takes around 15 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. Belt tension is adjustable. The machine is made entirely of stainless steel and has adjustable feet. Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble.

Condition: good (used), Year of construction: 1984, Filter area: 310 m², Filter pressure: 16 bar, Cake thickness: 30 mm, Total width: 2,700 mm, Total length: 9,800 mm, Total height: 3,230 mm, Empty load weight: 39,000 kg, Chambers: 86, Equipment: Documentation/Manual, Safety Light Barrier, Name: Chamber Filter Press Manufacturer: Schenk Type: KFP 1500/80 Year built: 1984 Construction form: Bridge beam press Filter pressure: 16 bar Press content: Approx. 4350 liters Dpgqtz Cycle: Closed Filter area: Approx. 310 m2 Plate size: 1500 x 1500 mm Number plates: 87 Plate material: Polypropylene Plate transport: Automatic Filter cloths: No Filter cloth washer: Yes Plate pack length: 6400 mm Cake thickness: 30 mm Dimensions: L 9800 x W 2100 (2700 with control panel) x H 2860 mm (3230 mm with filter cloth washing system) Empty weight: Approx. 39000 kg Technical doc.: Yes Message: Available from August. The cast steel plates were replaced with polypropylene plates in 2001. Accessories: Control cabinet, hydraulic system, light curtain, filter cloth washing system & 2 replacement plates Condition: Used-good Price: On demand

Condition: reconditioned (used), Overhauled and new painted. The pictures are sample photos of similar machines and are intended to show the execution and quality of the overhaul. All wear parts are renewed. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Plate size: 630 x 630 mm dimensions: approx. 2000 x 1100 x 1500 mm Chamber depth: 25 mm Ckrx83Edp0 Capacity: 210 liters Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", centered Number of plates: 25 plates Material plates: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filtrate trough + drip plate in plastic. Motor hydraulics with single acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator must push back the pressure plates by hand. Optional: Filling pump as piston diaphragm pump or compressed air diaphragm pump.

Condition: ready for operation (used), Year of construction: 1993, Belt width: 2.000 mm, E-drive 11 kW, dimensions: 2,5 x 2,75 x 1,78 m, weight: approx. 2,4 t., material: 1.4571 Sxsx9

Year of construction: 2024, Condition: new, Our belt presses can be dismantled and cleaned in just a few minutes without tools! The belt press is easy to operate. Effective belt cleaning is achieved by three spray nozzles and silicone scrapers. This innovative solution allows the system to be operated economically to produce fruit and vegetable juice. You do not need a high-pressure cleaner and save electricity costs when pressing. All you need is a compressor with a pressure capacity of 8 bar and a ½" water connection. - Fully automatic and infinitely variable regulation of the belt speed - Easy to clean - Easier maintenance - Rollable machine feet - Automatic belt correction Technical data Nominal capacity: 350 kg/h Working width: 400 mm Juice yield: up to 75% Power requirement: 0.55 kW, 400 V, 16 A Material: Wnr. 1.4301, AISI 304 stainless steel Blrh7Ld2P3 Air operating pressure: 6 bar approx. 50 L/h Dimensions Length: 1080mm Width: 1070mm Height: 1320mm Weight: 297 kg Optional: automatic juice emptying

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate format 1200 x 1200 mm, 40 - 145 plates, open or closed spout, 20, 25 or 30 mm cake thickness, pressure max. 15 bar, capacity 1200 - 4500 liters, filter surface 85 - 350 m², dimensions 7000 - 13.500 x 1800 x 2400 mm, weight 10.000 - 28.000 kg, autom. plate transport, engine hydraulics, with or without filter cloths Bgovewfhfg

Condition: used, Plant: Chamber filter press used Type: Netzsch Filter plate format: 1200x1200 Number of plates: 74 pieces Filter plates: PP Filter cloths: optionally available in coordination with the medium Filter area: approx. 204 m2 Press capacity: approx. 2719 dm3 Filter pressure: approx. 15 bar Pump technology: optional Dimensions L 8933x W 2240 x H 1900 mm Dpcnfr Purchase or hire: Viewing of the systems by arrangement at our factory.

Condition: used, Year of construction: 1991, Filter area: 46 m², Filter pressure: 12 bar, Cake thickness: 30 mm, Total width: 1,700 mm, Total length: 5,880 mm, Total height: 2,100 mm, Empty load weight: 7,000 kg, Name: Dewatering filter press used Manufacturer: Netzsch Type: 800/42 Year built: 1991 Construction form: Side beam press Filter pressure: 12 Bar Press content: 630 liters Cdyx8Bgwwy Cycle: Closed Filter area: 46 m2 Plate size: 800 x 800 mm Number plates: 42 Plate material: Polypropylene Plate transport: Automatic Filter cloths: No Filter cloth washer: No Plate pack length: 2670 mm Cake thickness: 30 mm Dimensions: L 5880 x W 1700 x H 2100mm Empty weight: approx. 7000 kg Accessories: A control cabinet, a hydraulic system Condition: Second hand Price: On demand

Condition: reconditioned (used), Overhauled and new painted. The pictures are sample photos of similar machines and are intended to show the execution and quality of the overhaul. All wear parts are renewed. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Plate size: 630 x 630 mm Cfbfrkcr80 dimensions: approx. 2900 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 312 liters Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", centered Number of plates: 40 plates Material plates: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filtrate trough + drip plate in plastic, Motor hydraulics with single acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator must push back the pressure plates by hand. Optional: Filling pump as piston diaphragm pump or compressed air diaphragm pump.

Year of construction: 2024, Condition: new, Our belt presses are equipped with two large pressing rollers, which means that the pressing process takes longer and the machine is pressed more gently. The result is high quality juice that is free of turbidity and foam. Pneumatic belt tensioning and automatic belt control ensure higher quality. The belt press is equipped with an automatic brush cleaning system. You do not need a high-pressure cleaner for belt cleaning, as the belt is cleaned with six special water nozzles. All you need is a compressor with a pressure capacity of 8 bar and a ½" water connection for cleaning. Thanks to the special nozzles, you use less water and have lower operating costs. The open system ensures quick cleaning. The system can be cleaned within a few minutes. Technical data: - Nominal capacity: 950 kg/h - Power requirement: 1 kW, 230 V, 16 A - Material: Wnr. 1.4301, AISI 304 stainless steel - Compressed air requirement: 50 L/h 6 bar - IP65 electronic control cabinet - Juice yield: Up to 75% - Fully automatic and infinitely variable regulation of the belt speed - User-friendly - Easy to clean - Rollable machine feet Dpct32 Dimensions Length: 2230mm Width: 1450mm Height: 1250mm Height of intake: 1240mm Height pomace ejector: 500mm Height juice outlet: 370mm Weight: 540 kg

Condition: used, Year of construction: 1974, Filter area: 327 m², Filter pressure: 15 bar, Cake thickness: 30 mm, Total width: 1,700 mm, Total length: 12,300 mm, Total height: 2,270 mm, Overall weight: 34,000 kg, Operating pressure: 410 bar, Chambers: 130, Equipment: Documentation/Manual, Safety Light Barrier, The Sludge filter press used will be available from September 2024. Name: Filter press Manufacturer: Rittershaus & Blecher Type: AEHIS 1200 Year built: 1974 Construction form: Bridge beam press Filter pressure: Max. 15 bar Press content: Appro. 4700 Liters Cycle: Closed Filter area: Approx. 327 m2 Plate size: 1200 x 1200 mm Number plates: 131 Plate material: Polypropylene Plate transport: Automatically Filter cloth washer: No Cake thickness: 30 mm Closing pressure: Min. 380 - max. 410 bar Dimensions: Length 12,300 x width 1,700 x height 2,270 mm Empty weight: 34 T. Technical doc.: Yes Message: It will be available from September 2024 Accessories: A hydraulic system, a light barrier. Dpgqnr Condition: Second hand Price: On demand

Year of construction: 2024, Condition: new, Our belt presses are equipped with two large pressing rollers, which means that the pressing process takes longer and the machine is pressed more gently. The result is high quality juice that is free of turbidity and foam. Pneumatic belt tensioning and automatic belt control ensure higher quality. The belt press is equipped with an automatic brush cleaning system. You do not need a high-pressure cleaner for belt cleaning, as the belt is cleaned with six special water nozzles. All you need is a compressor with a pressure capacity of 8 bar and a ½" water connection for cleaning. Thanks to the special nozzles, you use less water and have lower operating costs. The open system ensures quick cleaning. The system can be cleaned within a few minutes. Technical data: - Nominal capacity: 650 kg/h - Power requirement: 1 kW, 230 V, 16 A - Material: Wnr. 1.4301, AISI 304 stainless steel - Compressed air requirement: 50 L/h 6 bar - IP65 electronic control cabinet - Juice yield: Up to 75% - Fully automatic and infinitely variable regulation of the belt speed - User-friendly - Easy to clean - Rollable machine feet Dimensions Length: 2230mm Width: 1250mm Height: 1250mm Height of intake: 1240mm Height pomace ejector: 500mm Height juice outlet: 370mm Bloeip888O Weight: 480kg