Used Barbed Wire for sale (3,428)

Condition: excellent (used), functionality: fully functional, Year of construction: 1984, Loading capacity: max. 300 Kg. Diameter of decoiler: 1.000 mm Diameter of spool: max. 900 mm Inside diam of spool: 240 - 560 mm Lsdjf S I I Hspfx Affeak Hight of spool: max. 180 mm

Condition: used, TECHNICAL DETAILS - Table dimensions : 900 x 600 [mm] - Dielectric capacity : 1200 [l] TRAVELS - Travels on X/Y/Z axes : 550 x 350 x 400 [mm] - Travels on U/V axes : 550 x 350 [mm] - Rapid traverses rates (X/Y/Z) : 3 [m/min] - Rapid traverses rates (U/V) : 3 [m/min] - Max. taper : +/- 30 [°/mm] PART - Max. part dimensions : 1200 x 700 x 400 [mm] - Max. part weight : 1500 [kg] WIRE GUIDE - Wire diameter : 0.15 - 0.33 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 12 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2600 x 2600 [mm] - Machine height : 2340 [mm] - Machine weight : 2850 [kg] MACHINE HOURS - Number of hours under power : 54450 [h] Ledpouhca Sjfx Affsak - Spark erosion hours : 4713 [h] EQUIPMENT - CNC : CHARMILLES - Screen : LCD 15'' TFT - Remote control

Condition: excellent (used), Year of construction: 2016, operating hours: 29,000 h, workpiece weight (max.): 1,500 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, The offered Mitsubishi MP2400 from 2016 represents an excellent opportunity for companies engaged in or upgrading to high-precision wire EDM machining. With a total operating time of approximately 29,000 hours, the machine is in very good condition and fully operational. Demonstration or test runs are available, allowing interested parties to gain a direct impression of the machine’s condition and performance. Machine data & technical features Series specifications: • Control unit: Advance Plus2 Lasdpfx Asxztuhjffek • Max. workpiece dimensions (W × D × H): approx. 1050 × 820 × 305 mm • Max. workpiece weight: approx. 1,500 kg • Table dimensions: approx. 840 × 640 mm • Travel distances (X/Y/Z): approx. 600/400/310 mm • Wire changes possible between Ø 0.05 / 0.10 / 0.20 / 0.25 mm • Linear shaft motor drive system offering supreme precision in the micron range (MP denotes the precision package) Special features of this machine: • Operating time: approx. 29,000 hours • Condition: very good, fully functional, demonstration possible • Integrated CAM system directly on the machine (machine programming) • 20-kg wire spool station for less frequent wire changes • Accessories (excl.): 8 clamping bars, various Erowa clamping devices, prisms and custom clamps, ionizer

Condition: new, At Wöhler, we have developed a range of wire processing machines that are primarily used in the brush industry. They can roll round wire into flat wire, count and bundle individual wires and crimp or cut both individual wires and entire strands to a specific length. There are also solutions for rewinding or coiling and twisting individual wires into strands. Lodpfx Afjxzttkofjak Cut wire strands to an adjustable length and knot the sections into bundles with the Wöhler WCB 200. Produce Bucher tufts with the FWB 700. Roll round wire into flat wire with the FWR 250 - including automatic wire thickness regulation. Wind this flat wire onto spools with the DC 510, cut it to size and bundle the counted sections. Wave, cut and bundle wire strands with the DA 400 or the DA 700. Wave and wind wire strands with the STW 87, the STW 96 or the USTW 6000. Spool up to 44 individual wires into one strand - optionally including twisting. Get in touch with us. Together we will also find solutions for tasks not mentioned here.

Year of construction: 1990, condition: ready for operation (used), Offered is a straightening machine with cold rolling unit. 2-fold wire coil payoff, installed are: GSG COMBI rolling stand year 1994, GSG KWG.3 rolling stand year 1991, roller driver GSG ERT year 2007, straightening and cutting unit Wafios RBK51M year 2000, wire drawing unit 1 pass, wire diameter 6.0mm-12.0mm, max. speed 120m/min, min. cutting length 1600mm, cutting rate up to 80cuts/min, inlet strength approx. 50daN/mm². Package dimensions for finished material up to max. 14000mm length, up to 1000 bars per bundle. Length of the system approx. 5000mm. The system is offered without safety fence. Viewing possible by arrangement. Laedpexzikfefx Affek

Condition: good (used), Year of construction: 2011, functionality: fully functional, section length (min.): 100 mm, section length (max.): 3,500 mm, type of input current: three-phase, For sale: Used WAFIOS RS4 wire straightening machine in good condition. Technical data: • Model: RS4 • Manufacturer: WAFIOS • Straightening range: 3 to 6 mm • Equipment: includes blade, straightening stones, feed rollers in various sizes, decoiler • Year of manufacture: 2011 Laedpfx Asw U Eubeffek Condition: • Fully functional, regularly serviced Location: 74931 Lobbach Price: €9,900 net

Condition: good (used), Year of construction: 1990, loading capacity: 2.000 Kg. diameter of decoiler: 1.400 mm Laodpfoid Sgmex Affjk outside diameter of coil: max. 1.300 mm inside diameter of coil: min. 400 mm hight of the coil: max. 800 mm

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, GF AgieCharmilles CUT E 600 – Used Wire EDM Machine, Year of Manufacture 2019 Ledpfx Afoxwk Anofjak The GF AgieCharmilles CUT E 600 from 2019 is a high-precision and reliable used wire EDM machine, setting new standards in productivity, precision, and operating comfort through Swiss engineering and state-of-the-art technology. It is designed to meet the highest demands in tool and mold making, medical technology, and precision manufacturing. Main Features & Benefits ✅ Large Working Area and Robust Construction Traverse paths (X/Y/Z): 600 x 400 x 350 mm Traverse paths (U/V): ± 50 mm Max. workpiece size: 1030 x 800 x 350 mm Max. workpiece weight: 1,000 kg T-shaped design with a lowerable door for easy loading even of heavy workpieces ✅ Maximum Precision and Repeatability Glass scales on all axes for long-term accuracy without recalibration Contour accuracy up to ± 2 µm, surface roughness up to Ra 0.12 µm Thermally stable construction for consistently precise results ✅ State-of-the-Art Digital Generator (IPG) Up to 18% faster processing compared to previous models Anti-electrolysis technology for improved surface quality and increased service life Automatic power adjustment (POWER-EXPERT) to prevent wire breakage TAPER-EXPERT for taper cuts up to 30° over 77 mm height ✅ Intelligent Control – AC CUT HMI with 19” Touchscreen Windows-based control system with intuitive user interface 3D graphics, DXF import, and real-time process monitoring PART-EXPERT and WIRE-EXPERT for optimal cutting conditions and precise results Remote control included as standard ✅ High Productivity and User Friendliness Automatic threading and re-threading, even for hard wires Large 25-kg wire spool for extended operation times Energy-saving ECONOWATT system reduces idle power consumption to < 1 kW Compact footprint (approx. 4 m²) for optimal integration into any workshop Ideal For: ✔ Tool and mold making ✔ Precision components from steel, carbide, or copper alloys ✔ Series production and small batch manufacturing with high quality standards 📌 Our used 2019 machine undergoes professional cleaning, servicing, and thorough testing prior to sale to ensure maximum quality and reliability. 📩 Contact us for a customized offer or a demonstration!

Condition: repair required (used), Manufacturer: FANUC Tip: A04B-0221-B201 The condition of the machine is unknown, it does not work, it is for sale in this condition, !!! We do not know what is the probleme! Lasdpfx Aoik Hb Toffjk

Condition: good (used), Ideal for pallet racks with frame depth 800 mm and 2700 mm crossbars. It is also suitable for other uses. Size: 1340*820 mm (55*105 mm) Load capacity: about 400 kg/m2 If you need shelves or accessories in other compositions or designs, please contact us. We offer a wide range of new and used shelves and accessories and will be happy to assist you in your planning. Further accessories such as: Frame, corner and collision protection, push-through protection, chipboard, grids, rear wall grids, depth bars available. Shipping: Please ask for the freight costs by stating your postal code and location, as well as the desired article quantity. Further service offers: Lajdpfx Afshbhavsfsk Planning, shelf assembly/disassembly, purchase/sale. Changes and errors in the technical data, information and prices and subject to prior sale!

Condition: good (used), functionality: fully functional, Gitterbox emptying, pneumatic, for gitterboxes 1200 x 800 mm Dimensions: 2200 x 1700 x 2250 mm (LxWxH) Weight approx. 1500 kg Note: The machine is in good condition. It was checked and tested by us in 28816 Stuhr. You can find the video above in the pictures, or on our website or our YouTube channel. Inspections, even under power, are possible at any time by arrangement. Video calls are possible on request. We are happy to answer questions about the machine by phone from Monday to Thursday from 8 a.m. to 2 p.m. On Friday we are there for you from 8 a.m. to 1 p.m. Please note: Lodpfxov Nhk De Affeak All technical data refers to information provided by the manufacturer. We accept no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Viewings are possible by arrangement. The sale takes place ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: excellent (used), Year of construction: 2025, Wire reel, pasture wire reel, barbed wire winder, wire winder, wire winding machine, pasture fence winder, winding device -Drum diameter: 800 mm -Drum width: 990 mm -Drive: hydraulic -The device could be used with a corresponding front loader or three-point hitch -without front loader mount and hydraulic connections -Dimensions: 1020/1450/H830 mm Lasdpfx Aexvh Hueffjk -Weight: 318 kg

Condition: excellent (used), Year of construction: 2004, loading capacity: max. 1.500 Kg. Lodpeipv R Tsfx Affoak wire diameter range: 2,0 - 8,0 mm table diameter: 1.100 mm

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 2,340 mm, total length: 2,600 mm, total width: 2,600 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, overall weight: 3,300 kg, warranty duration: 6 months, GF AgieCharmilles CUT 300 Year of manufacture: 2013 Charmilles Millenium Control Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Maximum taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes Manual tank door (accessible from one side) Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Cutting speed: 340 mm²/min Best surface finish: Ra 0.10 µm Available wire diameters: 0.15 to 0.33 mm Dimensions of the complete unit: 2600 x 2600 x 2340 mm Total weight of the unit: 3,300 kg Lajdpexwktmofx Affsk The machine will be cleaned, fully overhauled, and functionally tested by us after the order is received. You will receive a 6-month warranty on the machine. We are happy to offer you commissioning of the machine.

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, lifting height: 6,000 mm, load capacity: 5,000 kg, lifting speed: 50 mm/s, power: 4.5 kW (6.12 HP), input voltage: 400 V, input frequency: 50 Hz, wire rope hoist Konecranes CXT400 5000kg emag.6m bridge crane trolley, hoist, crane single girder bridge crane mounted 5 ton crane trolley for sale Lasdsxpphmjpfx Affek Manufacturer: Konecranes CXT400 Year of manufacture 2004/11 Load capacity: 5000 kg Working height: 6 m Type: CXT40410050P35FBL0F Date of manufacture: 29.01.2001 Lifting speed: Fast: 5.0 m/min Slow: 0.8 m/min Side travel speed: Fast: 20 m/min Slow: 5 m/min Voltage: 400v 50Hz Drive: 4.5/0.7kw Controller: 48V

Condition: used, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Laedpfjxvdmdsx Affsk Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781/1L50 FR Serial-No. 1793 Heftdicke / Staple thickness 0-8mm Heftarmlänge / Staple Arm length 50cm Heftarmbreite vorn / Handle width at the front 10mm Klammerrückenlänge innen / Bracket Back Length Inside 12mm Heftdraht Runddraht Nr. 21 - 23 / Flachdraht II - IV Staple Wire Round Wire No. 21 - 23 / Flat Wire II - IV Heftgeschwindigkeit 250 Klammern pro min / Stapling Speed 250 staples/min Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 1976, number of stapling heads 1 Lodpfxev Ach Ro Affjak

Condition: used, Year of construction: 2015, functionality: fully functional, load capacity: 600 kg, total height: 900 mm, total width: 800 mm, total length: 1,200 mm, overall weight: 49 kg, Metal Wire Baskets with Solid Bottom Dimension: 1200x800x900 mm Material Weight: 48–49 kg/pc Wire & Mesh: Wire diameter 6.0 mm, mesh pitch 50×100 mm Solid Bottom: 0.8 mm thick steel plate Lasdexwwfpepfx Affjk Load Capacity & Stacking: Load 600 kg/pc in use, stackable up to 6 layers Quantity: 3,000 pcs.

Condition: used, Year of construction: 1976, wire diameter: 3,0 - 5,5 mm Lajdpfx Afokk Exjfsk nail length: 15 - 80 (100) mm output: 300 St./min.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Vertex 2 Year of manufacture: 2007 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Laedoxwb Stopfx Affjk Best achievable surface finish: 0.05 µm Ra Available wire diameters: 0.07 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes console with USB interface The machine will be cleaned, overhauled, and tested by us upon receipt of order. Commissioning and training can also be offered on request.

Condition: used, functionality: fully functional, Year of construction: 2001, lifting height: 8,000 mm, load capacity: 5,000 kg, input frequency: 50 Hz, wire rope hoist Konecranes XL300 5t emag.8m bridge crane trolley, hoist, crane Lsdpfsxpphtex Affoak double girder bridge crane mounted 5 ton crane trolley for sale Manufacturer: Konecranes Load capacity: 5000 kg Working height: 8 m Type: XL304N20ADA409B0K0 Date of manufacture: 29.01.2001 Lifting speed: Fast: 4.0 m/min Slow: 0.6 m/min Side travel speed: Fast: 25 m/min Slow: 6.3 m/min

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm Maximum workpiece weight: 4,000 kg X and Y axis travel: 1,200 x 800 mm U and V axis travel: 260 x 260 mm Z axis travel: 600 mm Permissible wire diameter: 0.2 – 0.3 mm Simultaneous controllable axes: 4 (X, Y, U, V) Motors: AC motors on all 5 axes Maximum taper: 30° over 100 mm Laedpfxsxwmacs Affjk Machine weight: 9,600 kg Filtration system Capacity: 3,000 L Conductivity control: automatic Resin capacity: 14 L Temperature control: automatic Dielectric cooling system: chiller Generator Power circuits: Mosfet AC Minimum roughness: Ra 0.35 Cutting speed: 360 mm²/min (with 0.3 mm brass wire) Automatic wire threading: standard Power supply: 400V three-phase CNC Hardware: Industrial PC, 64 bit Memory: 1 GB Display: 15” TFT touchscreen Data input: keyboard, RS 232, floppy, LAN, USB Positioning system: closed-loop servo-assisted Number of controlled axes: 5 (X, Y, U, V, Z) Minimum programmable increment: 0.0001 mm Machine equipped with: • Optical scales on X and Y axes • 600 mm Z axis • Coil holder for up to 50 kg spools • 1 set of 0.25 mm guides • 1 set of 0.30 mm guides • Taper cutting system • Automatic wire threading and re-threading after breakage • Clamping system: frame with universal drilling • 64-bit CNC with 16 GB memory • AC power generator with anti-electrolysis device • Automatic technology generation • Serial interface, floppy drive, LAN, USB • Dielectric unit with automatic demineralization system • Chiller Year of manufacture: 2018

Condition: excellent (used), Year of construction: 2015, operating hours: 9,014 h, functionality: fully functional, machine/vehicle number: MV2400S, overall weight: 3,500 kg, total length: 2,687 mm, total width: 3,030 mm, total height: 2,150 mm, input voltage: 400 V, input current: 50 A, type of input current: three-phase, input frequency: 50 Hz, Accessories: - ODS optical drive system - Tubular Direct Drives on X, Y axis - Scale on X, Y axis - Intelligent automatic wire feeding system (wire diameter 0.1 - 0.3 mm) - (Can be used both dry and underwater) - Wire straightening system - Automatic wire cutter (for thicker wires) - Automatic hole search - MITSUBISHI M700 controller - 3D CAD/CAM control system - 5 controlled axes + prepared for additional axes Lajdpfx Aevvt Afsffjk - PFC precision finishing (Precise Finish Circuit) - LLS long life system - 10 kg wire coil holder (receiver) - U-shaped hardened segmented receiving table - Compressor dielectric (water) cooler equipment - Remote communication preparation (mcAnywhere) - CE version - H/W 30°/45° (30/45° cutting capability instead of 15° for 0.25 mm wire Controller: - MITSUBISHI ELECTRIC "ADVANCE Plus" control software. - MITSUBISHI M700 control with 3D CAD/CAM software. - 10 GB memory - 15" touch screen - Clear layout of the main functions on the screen. - Programming with ESPERADVANCE conversational system. - The controller is prepared to receive 3D files. - Graphical inspection: 3D, front view, side view, top view. - Hand-held control unit. - Ethernet TCP-IP and 2 USB connection options - Preparation for remote communication (mcAnywhere)

Condition: excellent (used), Year of construction: 2017, operating hours: 19,187 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, overall weight: 52,000 kg, Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 140 Year of construction 2017 Working hours 19,187 hours, stand October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 4,34 m³ Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm Lasdpfx Afoxrta Ejfjk Driving motor 2 x 75 kW Connected load 226 kW Full load current 428 A Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 800 up to 1300 kg, depends on material and bale lenght SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., type) Schneider MAGELIS Touch Baler dimensions built up with hopper 13,200 x 27,000 x 7,344 mm (l x w x h) Transport dimensions only baler 13.200 x 2.750 x 3.450 mm (l x w x h) Machine weight baler approx. 52 tons Technical data chain belt conveyor: Manufacturer Bollegraaf Typ HBT 1216 Year of construction 2009 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Weight 16 t Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Comments: The press is currently in operation and is to be replaced by a new machine in the 2nd quarter of 2026. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, workpiece weight (max.): 70 kg, wire diameter (max.): 10 mm, type of input current: three-phase, input frequency: 50 Hz, Equipment: cooling unit, OMEGA CM43 Submerged EDM Lsdpswr Utisfx Affoak The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Capacity (kg) 70 Electrode mass (kg) 10 Axis travel: X430, Y320 mm dieletric tank: T4 model power supply: 50A Omega Pulse If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.