Used Barbed Wire Machine for sale (85,511)

Condition: used, Year of construction: 1981, functionality: fully functional, machine/vehicle number: D48E/7965, Offer Number: D48E/7965 Machinetype: barbed wire machine Make: WAFIOS Type: STH2 Constr. year: 1981 Itodpfex Ea E Iex Affor line wire diameter: 1,6-2,8 mm point wire diamter: 1,4-2,5 mm output - meter/min: 25-38 Location: Europe

Condition: excellent (used), Year of construction: 1989, Machinetype: barbed wire machine Make: VITARI Type: MFS Constr. year: 1989 line wire diameter: 1,6-2,8mm point wire diamter: 1,6-2,5 mm output – meter/min: 27-47 distance of barbs: 50-150mm Iedpfx Afsw N D Suofjtr Excellant condition

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, AGIECUT Progress V2 Year of manufacture 2009 Travels: X= 350 mm, Y= 250 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 500 mm²/min Iodpfx Asvax Iujffstr Glass scales on X- and Y-axis for increased precision Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient set-up AGIE IPG generator with power module AGIEVISION control unit Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after receipt of order. A test cut with the best surface finish is then carried out for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Year of construction: 1997, condition: ready for operation (used), General Data Measurements width 2610 Measurements depth 3270 mm Measurements height 2240 mm Machine weight 2600 kg Control Unit Model System 16-WB Brand FANUC Main Drive Max taper angle ± 30 degrees/80 mm (option ± 45 degrees/40 mm) Number of axis 5 Movement X-Axis Movement 520 mm Y-Axis Movement 370 mm Z-Axis Movement 300 mm (275 mm in water bath) U-Axis Movement ± 60 mm W-Axis Movement ± 60 mm Workpiece Iodpsx Imp Iofx Affjtr Workpiece X 790 mm Workpiece Y 730 mm Workpiece Z 275 mm Workpiece weight 650 kg (with coaxial spindle), 450 kg (with water bath) Table Outer length 750 mm Outer width 590 mm Additional Equipment Bedra wire unwinding device BAS 45/100E (to the left of the machine), capable of handling wire spools weighing up to 45 kg This 5-axis FANUC Robocut Alpha 1C erosion machine was manufactured in 1997. It features a coordinate travel of 520 x 370 mm on the X and Y axes, and a Z-axis adjustment of 300 mm. The machine can handle a maximum workpiece weight of 650 kg and offers a rapid traverse of 900 mm/min. Ideal for precision erosion tasks, the FANUC Robocut Alpha 1C machine we have for sale. Contact us for further details regarding this erosion machine. Application Types EDM

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, machine/vehicle number: 50163, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, overall weight: 4,000 kg, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Bidding obligates the bidder to collect the machine within the designated timeframe from 26.01.2026 to 29.01.2026! TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 300 mm Travel Z-axis: 300 mm Itsdpfx Aexqp R Dsffjr MACHINE DETAILS Electrical Data Operating voltage: 380/400 V Frequency: 50 Hz Rated current: 80 A Connection: 12 kVA Tank dimensions (L x W x H): 900 x 500 x 600 mm Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,700 x 2,500 mm Weight: 4,000 kg EQUIPMENT Documentation

Condition: used, Year of construction: 2017, Technical details: travel -x axis: 600 mm travel -y axis: 400 mm travel -z axis: 310 mm max. size of workpiece LxWxH: 1.050 x 800 x 295 mm max. workpiece weight: 1.500 kg table-size: 840 x 640 mm U-axis: + / - 75 mm V-axis: + / - 75 mm conical grinding: 15° / 260mm rapid traverse: 1,3 m/min wire dia.: 0,1 - 0,3 mm wire-forward-feed: max. 23 m/min weight of the machine ca.: 3,5 t dimensions of the machine ca.: 2,7 x 3,1 x 2,2 m wire eroding machine, Itedpfx Afex Hp Nhjfor autom. wire threading (AWT), chiller, tank incl. ion-exchange resins, clamping devices, reference tooling, aligning tools for wire, documentation aüürox. 9.100 h "machine on", approx. 4.200 h "working hours" *

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,537 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 1,030 mm, Wire EDM machine from 2021 with only 11,537 operating hours! TECHNICAL DETAILS Travel Path Travel path X-axis: 600 mm Travel path Y-axis: 400 mm Travel path Z-axis: 350 mm Workpiece Data Workpiece weight: 1,000 kg Workpiece height: max. 350 mm Workpiece width: max. 800 mm Workpiece length: max. 1,030 mm Table Data Table width: 630 mm Table length: 950 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,400 x 2,160 x 2,320 mm Total weight: 5,440 kg EDM hours: 11,537 h Power-on hours: 29,381 h Type of input current: three-phase current EQUIPMENT Ijdpfxox I Akus Affotr 16 kg spools Note: Dismantling and loading can be carried out by the seller at an additional charge.

Condition: used, Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, Travel X 350 mm / Y 250 mm / Z 220 mm Itedpfxsx Hghue Affor incl. chiller Automatic wire threading Water bath

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 426 mm, GF AgieCharmilles Classic V3 Year of manufacture: 2006 Travel distances: X = 500 mm, Y = 350 mm, Z = 426 mm U/V-Axis Travels: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (dry) Achievable surface finish: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM with automatic wire threading and re-threading after wire breakage Manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE IPG-V generator AGIEVISION 5 control Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3,460 kg The machine has already been cleaned, overhauled and tested by us. Iodpfxjx Hzvys Affstr We are happy to perform a customized test cut for you. You will receive a 6-month warranty on all machine parts. Commissioning and training are also available upon request.

Year of construction: 2000, operating hours: 4,800 h, condition: ready for operation (used), General Data Machine weight 1200 kg Measurements height 2000 mm Dimensions Machine Length 3200 mm Control Unit Brand FANUC Iedpfxox H U Ebs Affstr Model 18i-W Main Drive Number of axis 5 Movement X-Axis Movement 320 mm Z-Axis Movement 180 mm Y-Axis Movement 220 mm This 5-axis FANUC ROBOCUT α-0iA was manufactured in 2000. It features a travel distance of X-axis 320 mm, Y-axis 220 mm, Z-axis 180 mm, U-axis 120 mm, and V-axis 120 mm. With a maximum workpiece weight of 500 kg and total power consumption of 13 kVA, it's equipped with a Fanuc 18i-W control system. Consider the opportunity to buy this FANUC ROBOCUT α-0iA wire edm machine. Contact us for more information about this machine. Application Types EDM

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 251070/641311, travel distance X-axis: 350 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, table width: 400 mm, table length: 500 mm, No minimum price - guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates timely collection between 26/01/2026 and 29/01/2026! TECHNICAL DETAILS Travel distance X-axis: 350 mm Travel distance Y-axis: 300 mm Travel distance Z-axis: 300 mm Table dimensions: 500 x 400 mm MACHINE DETAILS Electrical data Operating voltage: 380 V Frequency: 50 Hz Rated current: 5 A Connection: 5 kVA Dimensions & weight Dimensions (L x W x H): 3,000 x 2,000 x 2,600 mm Weight: 3,000 kg EQUIPMENT Matching workbench Iedpfsxqpv Tex Affotr Clamping devices Copper electrodes Documentation

Condition: used, Year of construction: 2013, operating hours: 47,754 h, functionality: fully functional, machine/vehicle number: 52DR2077, workpiece weight (max.): 1,500 kg, travel distance X-axis: 620 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 300 mm, Equipment: documentation/manual, For sale is a used Mitsubishi MV2400R wire EDM machine in good, well-maintained condition. The machine is well preserved and has been handled with care. Itedox Iukmepfx Affer

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Iedpfx Afow Ucyuofotr Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: used, Year of construction: 2015, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, Travel: X 600 / Y 400 / Z 310; Water bath machine; Automatic wire threading; Chiller. Iodpox Hgg Djfx Affjtr

Condition: used, Year of construction: 2009, functionality: fully functional, FIRST CONTACT VIA WHATSAPP! Maximum workpiece dimensions: 1050 x 820 x 305 mm Maximum workpiece weight: 1500 kg Table dimensions: 880 x 680 mm Travel paths (X x Y x Z): 600 x 400 x 310 mm Table rapid traverse speed: 1300 mm/min Electrode wire diameter: 0.1–0.3 mm Maximum electrode wire feed speed: 23 m/min Electrode wire tension: 0.5–25 N Taper unit installed as standard Travel paths (U x V): ± 75 x ± 75 mm Maximum taper angle: 15° (at 260 mm workpiece height) Dielectric tank: working volume: 800 l Itedex Igygepfx Affsr Filter flow rate: 60 l/min Filter fineness: 3 µm FIRST CONTACT VIA WHATSAPP!

Year of construction: 2000, condition: ready for operation (used), Main Drive Number of axis 5 Movement X-Axis Movement 320 mm Z-Axis Movement 180 mm Y-Axis Movement 220 mm This 5-axis FANUC Alpha 0iA wire EDM machine was manufactured in 2000. It features X, Y, U, V, and Z axes with a maximum travel of 320 mm, 220 mm, 120 mm, 120 mm, and 180 mm respectively, all at speeds up to 900 mm/min. It can handle a workpiece mass up to 500 kg and has a machine mass of 1.2 tons. Power capacity is 13 KVA. Consider the opportunity to buy this FANUC Alpha 0iA wire EDM machine. Contact us for more information. Itjdpfx Afex H A Nusfer Application Types EDM

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 00402, travel distance X-axis: 450 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 162 mm, workpiece width (max.): 760 mm, workpiece length (max.): 1,100 mm, table load: 500 kg, No reserve price – guaranteed sale to the highest bidder! This machine is being auctioned as part of an operational closure. Placing a bid obliges the buyer to collect the item within the specified period from 26/01/2026 to 29/01/2026! TECHNICAL DETAILS Travel X-axis: 450 mm Travel Y-axis: 320 mm Travel Z-axis: 162 mm U-axis travel: ± 50 mm V-axis travel: ± 50 mm Max. workpiece dimensions: 1,100 x 760 mm Max. load capacity: 500 kg Max. workpiece height during immersion: 200 mm Max. workpiece height between wire guides: 360 mm Max. workpiece height for wire threading: 200 mm Tank dimensions: 1,150 x 200 x 2,280 mm Tank capacity: 1,000 l Measuring resolution: 1 µm Max. manual speed: 15 mm/s Itedoxqpvyjpfx Affsr MACHINE DETAILS Control system: CHARMILLES Electrical data Operating voltage: 380 V Frequency: 50 Hz Rated current: 9 A Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,700 x 2,700 mm Weight: 5,000 kg EQUIPMENT Matching workshop drawer cabinet Corresponding accessories Documentation

Condition: ready for operation (used), functionality: fully functional, Automatic cable cutting / crimping / dismantling machine High daily productivity thanks to quick changeovers. On average, a crimping machine can produce between 700 and 1300 crimps per hour. This machine can crimp terminals ranging from 2800 to 3200 units. Additionally, the machine can test the connections it crimps! - Flexibility and diverse applications - Maximum uptime with minimum maintenance Itodpfx Afox H Um Ssfjr - Integrated quality measurement devices - Intuitive and user-friendly machine operation

Condition: used, Year of construction: 2017, machine/vehicle number: 57CR2093, x-axis: 600 mm y-axis: 400 mm z-axis: 310 mm Max. workpiece weight: 1500 kg min. part length: 1050 mm maximum workpiece width: 800 mm Ijdpox Ed H Njfx Affjtr max. workpiece height: 295 mm Weight of machine approx.: 3500 kg Standard configuration Max. workpiece dimensions 1050 x 800 x 295 mmWork table dimensions 840 x 640 mm (square table)Rapid traverse rate of the work table 1300 mm/minElectrode wire diameter 0.1 to 0.3 mmMax. wire feed speed 23 m/minElectrode wire tension 0.5 to 25 NTaper unit Opto - linearAxis travel +/- 75 x +/- 75 mmMax. taper angle 15° (with 260 mm workpiece thickness)External dimensions 2687 x 3030 x 2150 mm Extended machine accessories including cooler

Year of construction: 1987, condition: ready for operation (used), A Mitsubishi wire EDM machine including an automatic wire changer (AWF system) is available. Travel X/Y: 381mm/749mm, table dimensions X/Y: 647mm/797mm, max. workpiece dimensions X/Y/Z: 647mm/749mm/259mm, max. workpiece weight: 950kg. Machine dimensions X/Y/Z: approx. 1850mm/2600mm/1950mm, weight: approx. 4100kg. Including 12 wire spools and one ceramic replacement plate. The wire changer is defective. Documentation available. An on-site inspection is possible. Ijdsx Hz Shjpfx Affetr

Year of construction: 2016, condition: ready for operation (used), This 5-axis FANUC ROBOCUT C600IB was manufactured in 2016, featuring a maximum workpiece size of 1050 × 820 × 400 mm and a weight capacity of 1000 kg. It includes XY table travel of 600 × 400 mm and Z-axis travel up to 400 mm. The machine supports a wire diameter range of 0.10 to 0.30 mm and is controlled by the FANUC 31i-WB system. Consider the opportunity to buy this FANUC ROBOCUT C600IB wire edm machine. Contact us for more information. Iedpfsx Hblnsx Affotr Application Types EDM

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 3003500029, travel distance X-axis: 650 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, table width: 460 mm, table length: 720 mm, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates you to collect the machine on time between 26/01/2026 and 29/01/2026! Itjdpfxsxqn Ibj Affjr TECHNICAL SPECIFICATIONS Travel X-axis: 650 mm Travel Y-axis: 300 mm Travel Z-axis: 400 mm Table dimensions: 720 x 460 mm MACHINE DETAILS Electrical data Operating voltage: 400 V Frequency: 50 Hz Rated current: 18 A Connected load: 12 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,600 x 2,700 mm Weight: 5,000 kg EQUIPMENT Workshop drawer cabinet Documentation

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, The fully automatic Alpha 530 single-core cable processing machine for crimping and fitting rubber seals on both sides meets the highest quality standards for cable cross-sections from 0.13 to 6 mm². Iodpfxex H Uale Affetr

Year of construction: 2015, condition: ready for operation (used), General Data Machine weight 3000 kg Control Unit Brand FANUC Model RoboCut α-C600iA Main Drive Isdsx D Duqspfx Affetr Number of axis 5 Min. Wire Diameter 0.1 mm Max. Wire Diameter 0.3 mm Movement X-Axis Movement 600 mm Z-Axis Movement 310 mm Y-Axis Movement 400 mm This 5-axis FANUC RoboCut alpha C600iA was manufactured in 2015, featuring X/Y axis travel of 600 mm × 400 mm and a Z-axis option up to 410 mm. It supports a maximum workpiece weight of 1000 kg and utilizes a FANUC Series 31i-W MODEL B CNC for precise control. Equipped with AI technology for enhanced accuracy and automatic wire threading, it's ideal for detailed machining tasks. Consider the opportunity to buy this FANUC RoboCut alpha C600iA wire edm machine. Contact us for more information. Application Types EDM

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 1900 mm Itsdpfex D N Hrox Affjr Measurements depth 1800 mm Measurements height 2200 mm Movement X-Axis Movement 550 Y-Axis Movement 400 Z-Axis Movement 350 This 5-axis AgieCharmilles Spirit 3 was manufactured in 2008. It features an integrated C-axis and electrode magazine, multitasking operating system with object-oriented graphical interface (AEP Spirit), and a table size of 850×650 mm. Movement range includes X:550, Y:400, Z:350. Consider the opportunity to buy this AgieCharmilles Spirit 3 wire EDM machine. Contact us for more information about this machine. Application Types EDM