Welding robot system

Cloos

Condition: used, Year of construction: 2007, table diameter 4520 mm table load 35000 kg swivelling range 110 Grad total power requirement 44 kW weight of the machine ca. / t required space / m Type: ROMAT 350 / LVEB-120000N-4m / VVEs-D-18000N-5m-S / QVEB-2m travelling beam / CR-200000N / Hydraulic scissor lift table In the scope of delivery: Item Designation 1 Welding power source GLC 603 Quinto SD 2 Wire drum 3 Service door 2.1 4 Robot control cabinet 5 Service door 1.2 6 Scissor lift table (shown in parking position) 7 Cross-travelling unit QVEB 8 ROMAT 350 robot 9 Service door 1.1 10 Safety fence 11 Platform 12 Positioner 13 Sliding door 1 14 Linear traversing unit LVEB 15 Vertical traversing unit VVEs 16 Sliding door 2 The disc ring on the table is a device that is not included in the scope of delivery ----- Technical data - Mechanical dimensions (without control unit and superstructures): approx.6440(57 7 0)x4520(2700)x5460(3320) LxWxH - Turntable diameter: 4520mm - Weight: approx. 25,000kg (without superstructure) - Speed range: 0.004 - 1.07 rpm - Welding current coupling: 600 A - Maximum table load capacity: 35 tons (according to load chart) Ambient temperature Storage / transport 0 to 60'C Operation +4 to 35 "C Interfaces Central transfer point for control, power supply, earth connection ----- 2.3 Linear traversing unit, LVEB Type LVEB-120000N 4m Dimensions W x D x H 7,700 x 2,440 x 776 mm Weight 4,355 kg Travelling distance 4,000 mm Load of the carriage 120,000 N Drive unit Gear motor Precision bevel gear motor Manufacturer Stöber Type K402VF0250EK703V Power 4.21 kW Voltage UKE 140 V / 1000 rpm Njdpermulvefx Ad Necl Current Rated current IN: 8.32 A Type of current Standstill current I0: 9.04 A Motor speed 3,000 rpm Gear ratio i = 25.28 ----- 2.4 Vertical traversing unit, VVEs Type VVEs-5m Dimensions W x D x H 2,000 x 1,960 x 7,150 mm Weight 9,500 kg Travelling distance 5,000 mm Max. moving mass 18,000 N Drive unit Gear motor Bevel gear motor with brake Manufacturer Stöber Type K713VF0790MQ30ED704B Power 4.8 kW Motor speed 2,000 rpm Gear ratio i = 78.83 (20181/256) ----- 2.5 Cross-travelling unit, QVEB Type QVEB-2m Dimensions W x D x H 1,270 x 4,100 x 756 mm Weight 1,950 kg Travelling distance 2,000 mm Load on the travelling beam 10,000 N Max. moving mass 18,000 N Drive unit Gear motor Precision flat geared motor Manufacturer Stöber Type FS202VQ0145ED402U Power 1.43 kW Voltage UKE 140 V / 1000 rpm Rated current IN 2.86 A Type of current Standstill current I0: 3.1 A Motor speed 3,000 rpm Gear ratio i = 14.65 (3180/217) ----- 2.6 Rotary indexing table Type CR-200kN Manufacturer Cloos Dimensions W x D x H 1,820 x 2,120 x 541 mm Weight 2,850 kg Drive unit Gear motor Bevel gear motor Manufacturer Stöber Type K814VG1540EK803U Power 6.7 kW Motor speed 3,000 rpm Gear ratio i = 154.322 ----- 2.7 Robot ROMAT 350 Type ROMAT 350 Dimensions (W x D x H) in reference position 1,900 x 600 x 1,500 mm Weight 205 kg Footprint 500 x 515 mm N...

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Initial commissioning: 2000 Control system: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ±110° C-axis: ±300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic Spindle freshly overhauled at the end of 2024! Linear axis drives Ncsdpjw Rl S Sefx Ad Nel Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions & weights Machine footprint with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of supply Condition of the machine Fully functional, in very good condition. Machine remains connected and is available immediately.

Condition: ready for operation (used), Year of construction: 2016, number of axes: 6, This 6-axis CLOOS QRC 350 QIROX welding robot was manufactured in 2016. It features a maximum load capacity of 15 kg, a workstation reach of 3400 mm, and advanced V6 control. Equipped with a 450A Qineo Pulse A welding machine, it ensures precise and efficient welding. The robot includes a touch sensor and an arc sensor for enhanced accuracy during operations. Consider the opportunity to buy this CLOOS QRC 350 QIROX welding robot. Contact us for more information about this machine. Additional equipment Njdpeyaliisfx Ad Nocl • Premium control panel with wall bracket and cable holder • External gas cleaning device • Adjustable electro-pneumatic valve • Wire feed equipment Machine Benefits Technical Machine Benefits • Built-in welding interface and software • Protective tube for wire transfer • High usability with movable counter-side support • Workstation: 3400 mm • Longitudinal track travel speed: 1. 8 m/sec • Longitudinal track travel length: 7000 mm • Qineo touch sensor: 60 v • Arc sensor for welding path adjustment Extra Information Includes standard height robot stool and computer connector for enhanced usability. Control Unit Control: V6 Advanced Digital inputs and outputs: 16 USB connectors: 2 Connectivity: Expandable up to 16 axes, CAN-Bus, serial interfaces

Condition: ready for operation (used), Year of construction: 2023, This CLOOS Instant pro IRPS was manufactured in 2023. It features a QIROX welding robot with a maximum payload of 10 kg and a working range of Ø 3900 mm. Equipped with advanced QC 2 control system, it includes a programming handheld device and supports new tandem leading/trailing processes. Ideal for high-quality welding applications, it also comes with a comprehensive set of welding and sensor technologies. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Working range: Ø 3900 mm • Programming handheld device with touchscreen • Qirox technology interface • Tool controller ctms • Tcp measuring device Extra Information Welding Technology Power source Arc sensor Water cooling module Control module Wire drive unit Robot welding torch Software Parameter grinding Distance-dependent transition between parameter lists Multi-layer technology Programmable pendulum figures Software language: German IRPS Scanner Control IPC Rittal control cabinet Touch screen Scanner interface Uninterruptible power supply Scan width: 1000 mm at 500 mm product height Scan speed: 300 to 1000 mm/sec Burner Cleaning Unit Torch cleaning device Compressed air amplifier Wire cutter Control Unit Nodoyaimljpfx Ad Nscl Digital inputs/outputs: 16 Serial interface Computer connection: QIROX controller CAN bus USB interfaces: 2 Flash memory: 8 GB Buffer module: 24V Point editor Expandable to up to 16 axes

Condition: excellent (used), Year of construction: 2015, Complete robot welding cell with rotating table and enclosure Nsdpfx Aonr E Ened Necl Robot: KUKA KR 150 R2700 extra Load capacity: 150kg reach: 2.090mm with welding gun (Dalex, new in 2018) with cooling device (water cooling in circuit) complete second welding gun (make ARO) included own cooling unit built in the machine automatic rotary table with 10-fold division (at present for running product only 5-fold built up) Workplace for parts insertion or disposal well illuminated and protected by light barriers Control of the complete line by means of Siemens SPS, provided by company HS Automation Siemens control panel for system operation at the insertion station mounted on a swivel arm All together in an enclosure with safety door. Plant can still be visited in operation.

Condition: used, Year of construction: 2000, current intensivity bis 300 A Ncedpfx Ajyacp Hed Nel burner heads . dimensions of the machine ca. . m

Condition: used, Year of construction: 2000, current intensivity bis 350 A burner heads . Njdpfx Asyacpysd Necl dimensions of the machine ca. . m

Condition: excellent (used), Year of construction: 2015, Roll pressure infinitely adjustable from 240 kN feeds - fine adjustment 0,5-45 mm/min turning speeds 0-80 U/min Swivel angle of the roller heads 11 ° Diameter of the roller spindles 69,85 mm Stroke - Roller screw slide 0-150 mm min. dist. - roller screws 138 mm max. dist. - roller screws 285 mm min. diameter - Rolling tools 230 mm max. diameter - Rolling tools 135 mm min. dia. 2 mm max. diameter 55 mm thread length at plunge operation 200 mm thread length at continiuous operation 2000 mm Ncedpfx Ajxukrqed Nel maximum thread pitch 4 mm total power requirement 14 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 2,5 x 1,9 m Rolling time continuously adjustable from: 0.1s Pause time continuously adjustable from: 0.1s Rolling spindle length: 200mm Machine bed height: 810mm Rolling spindle height above machine bed: 200 mm Height of support bearings: 115 mm Largest pitch for serrated teeth: 2.5 mm (up to 70 kg/mm2 Strength of the material)

Condition: new, Year of construction: 2019, operating hours: 135 h, System consisting of: 1 Qirox QRC 410 welding robot including QC2 adv. controller, handheld programming unit, 24 V buffering, PC connection on the cabinet side, 2 GB flash drive Gas nozzle sensor, arc seam detection, multi-layer technology, spot editor, QTI, QWP Qineo Puls 600 with master control module, wire feeder, torch hose package, MRW 510 evo welding torch, torch test gauge, mechanical cleaning, pressure booster, 20 kN floor track, 12 m travel distance Connection control, 1 light barrier, 1 start pre-selector Nedpfx Adjwhxiae Nscl Delivery date: from stock. Subject to prior sale. Robot is mounted on a C-stand in a suspended position. System can be converted to 2 workstations and supplemented with manipulators available in stock.

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, 1 cloos welding robot ROMAT 320 inc. control ROTROL II, teach pendant incl. cable gasnozzle sensing, seam tracking, point editor Ncjdpjizkbpsfx Ad Nsl Pedastal for robot Cloos welding machine MC 3 353 (350 A pulsed arc machine), wire drive, torch, torch hose package, connection hose package, mech. torch cleaning, pressure ampl., 2 stations turning table incl. 2 turning devices without tailstock type HW 3 DP 1500, load capacity/station 150 kg, swing radius 400 mm, max. dimension of workpiece 800x650 mm, 1 light beam, 1 start stop box, 1 safety wall on turning table 1 safety switches for service door incl door Base frame between robot and workpiecemanipulator delivery time: 8 weeks. Subject to prior sale.

Condition: used, Hydraulic workshop press, broaching press, keyway broaching press MaVo Type 5t-20 hydraulic workshop press Used for broaching keyways in through holes. Press force 5 tons (at 100 bar hydraulic pressure) Column width 770 mm Cylinder stroke 220 mm Distance from threaded piston rod to table crosshead max. 900 mm Pressing speed (downward ram): approx. 11.5 mm/sec. = 220 mm in 19 seconds Pressing speed (upward ram): approx. 24.5 mm/sec. = 220 mm in 9 seconds. Motor power 5.5 kW Power supply 400 volts, 50 Hz - 2-hand control (2 buttons for down, 1 button for up) - HAWE hydraulic pump, type K5/3 (also delivers 400 bar, but the pump is very, very loud) Nsdpfx Adewki Ape Njcl - Threaded connection on the piston rod: M42 x 1.5 mm external thread - 1 screw-in extension, approx. 290 mm, for the piston rod with M42 x 1.5 mm internal thread - 1 screw-in extension, approx. 250 mm, for the piston rod with M42 x 1.5 mm internal thread - 2 ram extensions for insertion into the screw-in extension, 110 and 130 mm long - 2 support plates - Very sturdy steel construction made of 140 mm double I-beam - Durability of the steel construction probably 40 tons. or more - Mobile with pallet truck Space requirement: L x W x H 1200 x 930 x 2280 mm Weight: 485 kg

Condition: used, Year of construction: 2021, operating hours: 300 h, functionality: fully functional, 1 cloos welding robot QRC 350 incl. control QC2, teach pendant incl. cable Connection cable between control unit and robot Ncjdoxvbu Eopfx Ad Nsl Touch sensing, seam tracking, point editor, C bow construction for robot in a fixed position Cloos welding machine Qineo Next 452 (450 A pulsed arc machine), wire drive, torch, torch hose package, torch jig, connection hose package 5 m, mech. torch cleaning 2 stations turning table incl. 2 turning-tilting tables 5000 N load capacity/station 500 kg, swing radius 700 mm 1 light beam, 1 start stop box, 1 safety wall on turning table 2 safety switches for swing doors Base frame between robot and workpiecemanipulator delivery time: appr. 3 month . Subject to prior sale.

Condition: used, Year of construction: 2013, Robotic system consisting of: Ncodpfxsx Atp Is Ad Nel 1 welding robot Qirox QRH 390 incl. control unit, programming hand device, 24 V buffering, PC-side computer interface, 2 GB flash drive Gas nozzle sensor, arc seam tracking, point editor, Qineo Puls 450 with Premium control module, wire feeder, torch hose package, welding torch, torch testing gauge, mechanical cleaning, pressure booster, Floor-mounted track 10 kN, travel length 8 m, robot installed in upright position on base pedestal. Wire drum travels with the system. 4 positioners with counter bearing WP-TC 10 kN, load capacity 1,000 kg, clamping length 3.0 m, rotation radius 1 m Connection control, 4 light barriers, 4 prestart selectors, Delivery: immediately available. Special price for purchase by 15.12.2025! System will be cleaned, tested, and serviced prior to dismantling. Warranty: functional guarantee Very low operating hours

Condition: new, thread dia. M3 - M16 mm max. 187 U/min. working area 180 - 2000 mm engine output 0,7 kW Njdpfefg U Sqex Ad Njcl Electric tapping machines for M3 - M16 thread, Angle adjustable. 9 pcs. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. optional: Clamping table with T-slots: 990x700x800mm. Magnetic base. Also available: M14 to M24 and M27 to M33.

Condition: used, Year of construction: 2019, functionality: fully functional, System consisting of: 1 Qirox QRC 350-E welding robot including QC2 adv. control unit, 1 Qirox QRC 410-E welding robot including QC2 adv. control unit, handheld programming unit with 25 m cable, 24 V buffering, 2 GB flash drive Software expansion for each robot: Gas nozzle sensor, arc seam detection, multi-layer technology, point editor, transformation, 15" TFT with touchscreen on the cabinet, master-slave for robots 1 and 2, RSM software for remote maintenance 2 ICSE LD offline lasers Robot 1 single-wire tandem welding equipment with automatic torch change system: 2 Qineo Puls 600 (600A) with master control module, 3 wire feeders, 3 torch hose packages, single MRW 510 evo welding torch, Duo drive CDD 2, single torch test gauge, and CDD, single-wire mechanical cleaning with external cleaning, pressure booster, 1 tandem burner ZMW 850 evo, Duo drive tandem CDD-T, burner test gauge single and with CDD, tandem mechanical cleaning with external cleaning Ground track 50 kN, travel distance 26 m, 1 C stand with height slide, travel distance 1.5 m for robot 1, 1 fixed C stand for robot 2 2 WPST-30 kN rotating devices, electric. Shaft, synchronous drive, designed as a gyro wheel for the support of hall beams (min. size 70x180 and max. 400x900 mm, support weight 4000 kg, on a motorized sliding track, max. clamping length approx. 19 m, Nedpfjwgd Hzox Ad Njcl 1 L-shaped manipulator WPS-TS 20 kN, turning radius 2750 mm Connection control, 2 light barriers for floor track protection, 2 start pre-selectors, partition walls and sliding gates including limit switch protection, 2 bumpers for floor track protection of both carriages, signal light for system status. Both robots can weld on the hall beams, and robot 2 can also weld on the L-shaped manipulator. 1 Tecau filter unit with 6000 m³ extraction capacity, 2 mobile extraction hoods with curtains, extraction slotted duct Delivery date: available immediately. Appointments by arrangement. Inspections under power are possible.