Used Ball Bearing for sale (5,442)

Year of construction: 1997, condition: refurbished (used), overall weight: 300 kg, total length: 1,270 mm, total width: 550 mm, total height: 570 mm, 4 spiral casing pumps in process design 1 of these completely overhauled, ball bearings of the pump and motor new. Mechanical seal overhauled by a specialist company. All seals new. Flow rate: 6 m³/h Head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearing Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type, drive side: oil Lubricant monitoring: oil level regulator Materials: Pump casing: Duplex steel Noridur 1.4593 (9.4460) Partition wall: Duplex steel Noridur 1.4593 (9.4460) Pressure cover: Duplex steel Noridur 1.4593 (9.4460) Hodpfxjiuznus Agtofl Shaft: Hardened steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing housing lantern: Grey cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Suction nozzle nominal size: DN 80 Discharge nozzle nominal size: DN 40 Nominal pressure suction side: PN 10 Nominal pressure discharge side: PN 10 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Thermal class: F Motor protection type: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg The material 1.4593 Noridur is very well suited for: - Chemical and process industries - Sulfur and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and transport - Flue gas desulfurization plants - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment/sewage treatment plants - Offshore and marine technology

Condition: like new (used), functionality: fully functional, back gauge: 750 mm, overall weight: 3,500 kg, total length: 2,800 mm, total width: 1,900 mm, total height: 1,660 mm, number of support arms: 3, year of last overhaul: 2019, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, HACO TS 2006 in very good condition Working length: 2050 mm Capacity in regular steel: 6 mm (400 N/mm²) Length of back gauge: 750 mm Control: SP-9 motorized back gauge with digital display Blade gap: manual Condition of blades: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of clamps: 18 Length and number of sheet supports: 5 x 500 mm, 1 x 1500 mm, side gauge 1500 mm including ball bearings Equipped with a sheet support device: No Working height: 770 mm Motor power: 7.5 kW Total length: approx. 2800 mm Total height: approx. 1660 mm Hedpfx Agjzxgupstsfl Total width: 1905 mm Weight approx. 3500 kg Year of manufacture: 2019 Delivery and installation at your location are, of course, possible; delivery costs and any additional costs will be discussed.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 0397, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 9,000 rpm, table length: 2,500 mm, table width: 850 mm, coolant supply: 20 bar, Equipment: documentation/manual, Well-maintained MATEC 30HV with various features: automatic B-axis +/-90 degrees with 1-degree division integrated NC rotary table, diameter 630mm Heidenhain TNC426 with electronic handwheel internal coolant supply with paper band filter (20 bar) tool magazine with 36 positions spindle hours: 13,000h suitable for SK40 compressed air to the external nozzles chip conveyor with integrated coolant system (discharge height: approx. 850mm) chip flushing gun tool probe for tool measurement center partition available Hjdezt Iztopfx Agtefl complete enclosure of the work area with a roof Bellows are new Lifting cylinder was renewed in 2026 Ball screw drive including nut, bearing, and coupling was renewed in 2025 The risk of dismantling and transport, as well as the costs of dismantling and transport, are entirely borne by the buyer. Inspection is possible by appointment.

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. Hodpfxozvhlke Agtsfl The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: like new (used), total length: 5,000 mm, total width: 2,400 mm, total height: 930 mm, color: blue, Operating conditions: The trailer is designed for use on level and paved surfaces for internal plant transport. Towing vehicle type designation: unknown Load to be transported: unknown Hsdoxrtluspfx Agtofl Multiple trailer operation: The trailer components are not designed for operation in combination with multiple trailers (without a trailer coupling). Payload: 40t at 6 km/h and evenly distributed load (surface load) across the loading platform between the axles. Point or line loads are only permitted upon notification. Main frame: Robust welded construction made from profile steel sections. Loading platform: Size approx. 5000 x 2400 mm, loading height 930 mm, platform covered with timber planks, all-round edge protection. Steering: All-wheel steering on 4 pendulum axles, tow bar can be raised, removed, and repositioned from front to rear. Hitch height on towing vehicle approx. 670 mm (other hitch heights only permitted upon notification). Drawbar eye according to DIN 74054, diameter 40 mm. Track rods with adjustable ball joints. Diagonal or towing rods adjustable and fitted with low-maintenance joint bearings. Drawbar safety lock according to accident prevention regulations (UVV). Undercarriage: 4 steered pendulum axles (2 steered axle lines) to ensure even load distribution on the wheels. Wheels with solid elastic rubber tires approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 Ultramarine Blue. Additional equipment: 2 lashing bars on each long side. For rental or sale EU-wide.

Condition: used, axle configuration: 2 axles, first registration: 03/2023, Equipment: ABS, Equipment: Sliding trailer 20 S * Dimensions and weights * External overall length approx. 7,055 mm * Overall width approx. 2,500 mm * Laden height approx. 1,150 mm * Roller track length approx. 6,890 mm * Wheelbase 5,240 mm * Unladen weight approx. 3,460 kg * Technically permissible total weight approx. 20,000 kg * Permissible total weight approx. 18,000 kg * Payload approx. 14,540 kg * Designed for containers with a length of 5,000 to 7,000 mm according to DIN 30722. * (Technical changes reserved.) * Chassis: * Chassis construction made of welded I-beams in QSTE steel * 4 container locking devices and upper sliding frame locking device, pneumatically operated * Side protection device according to RL 89/297/EWG, closed (position 2) * Bogie: * Bogie 980 FM including ball bearing turntable 90/1100/22 (low maintenance) * Drawbar: * Drawbar 2600/980/100/30, inclined drawbar pin * with height adjustment (coil spring with locking mechanism) * Drawbar with DIN drawbar pin, internal diameter D=40mm, external diameter D=110, thickness 30mm * Axles: * 2 x 10 t axles for 19.5 disc brakes, ET 138, manufacturer at manufacturer's choice. * Disc brake diameter approx. 370mm, * Wheel fastening by center centering according to DIN 74 361 Part 3. * Braking system: * Air brake system according to EU directive with interlock-proof * Duomatik coupling head * Conventional air suspension system, * EBS Type 4S/3M, electronic braking system with ROLL Stability, * Double-diaphragm spring accumulator cylinder on the rear axle, * Release valve for separate release of the spring accumulator brake. * Lighting system: * Lighting system 24 Volt, full LED according to RL 76/756/EWG with multi-chamber lamp * (Hella) and license plate lights integrated into the light panel Hfedpfx Aey Trycogtel * 1 x 15-pole plug connection * 6 LED side marker reflector lights * 2 LED outline lights, white, at the front * 2 LED position lights at the rear, separately mounted * 1 reversing light (position 3) * Tires: * Regional traffic tires, tire manufacturer at manufacturer's choice * 8-ply 265/70R19.5 (7.5x19.5) * Steel wheels ET 138, wheel nuts unpainted * Underrun protection: * TÜV-tested underrun protection made of aluminum. * Two vertical delta-shaped impact protection profiles serve to protect the rear during * loading and unloading. * Accessories: * 4 plastic fenders, half-shells at the front and rear, single-wheel fenders * 4 anti-spray mud flaps * 1 lockable plastic toolbox * 1 chock with holder * 1 license plate holder * 1 A-sign for the transport of waste materials * 1 net box (position 4) * 2 container guides * 3 small EBB stickers (position 5) * Painting: * Chassis color: MB 7350 Novagrau * Upper sliding frame: MB 7350 Novagrau * Wheel hub color: black KTL * Rim color: RAL 9006 silver * Contouring marking at the rear: red * Contouring marking on the side: white * SSE: RAL 7001 Silbergrau (position 6) * Rear panel/light panels: RAL 7001 Silbergrau (position 6) * Underrun protection: aluminum-anodized (silver) * Locking hooks, container guides: yellow * Documentation: * Included in the scope of delivery: * Commissioning and brake test report * Operating instructions * Maintenance instructions from axle manufacturer * Spare wheel holder removed All information without guarantee. Errors and omissions excepted. Subject to prior sale.

Year of construction: 2003, condition: excellent (used), Press-in device for ceramic pins in rotor shafts Principle of operation: The ceramic pins are fed by means of an oscillating conveyor pot via a pneumatic hose to an inspection station in which the position of any one-sided hole is checked. This is done with an optical sensor. Incorrectly positioned parts are conveyed by a pneumatic slide into a collecting container. Pins in the correct position are fed through another pneumatic tube to the separator of the press-fit tool. The actual press-fit process is also performed pneumatically with a punch guided by a roller bearing. First, a manually adjustable pressure p1 is used to check that the pin is not pressed too lightly into the shaft. A pressure p2, which is also manually adjustable, then presses the pin into the rotor shaft as far as it will go. A disk spring package preloaded with 5,000 N prevents excessive force from being exerted on the pin and shaft. The rotor shaft must be manually inserted into the die, removed and clamped by an operator. This process is safeguarded by a light curtain. Design Self-supporting station integrated in complete system for pressing in ceramic pins and balls. Rotor shafts Ø: 5 - 20 mm L: 50 - 200 mm Ceramic pin Ø: 3 mm L: 5 +/- 0,2 mm Working cycle Power: 15 strokes per minute Safety safety door with safety switch Category 4 light curtain Emergency off Airborne sound emission Continuous sound pressure at the workplace: 70 dB (A) Electrical connection Voltage: 230 V AC Frequency: 50 Hz Fuse. 10 A Compressed air connection Hfjdpfx Ajib H U Dsgtsl Operating pressure: 5 - 7 bar Dimensions L x W x H = 850 x 950 x 1020 mm Weight: approx. 110 kg Year 2003 Electrically height adjustable work table Documentation and wiring diagrams are available

Year of construction: 2018, condition: ready for operation (used), Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screws), motor spindles with release units (replace bearings/reseal), cross slides (guideways/ball screws/motor), workpiece spindle (replace bearings/reseal), protective enclosure (interior cladding/working area door/repaint machine), coolant pumps, replacement of electrical cables/lubrication and hydraulic lines, as required. An on-site inspection is possible. Hfsdpfx Ageztducstsl

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Hjdpfx Agswym Nfetsfl Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: as good as new (ex-display), Year of construction: 2023, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), 2-motor HF-cut-off saw station, HF-top and bottom Multiprofile milling unit, 2-motor corner rounding unit, chain feed, motorized beam pressure with encoder and ball-bearing double roller top pressure, extendable work piece support, signal lamp for work piece sequence, synchronization of working units by encoder as well as L-Motion control (18-axis). For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/5.0 mm and of 10 – 60 mm work piece thickness. Hfodpfxsf Tdwce Agtjl →Automatic edge feeding for roller material over turntable D = 800 mm. →Longer infeed lineal (650 mm) →Pre-milling units :Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material. →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness. →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood. →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with pneumatic tension for a nearly invisible joint of the edge material with the work piece, program-controlled setting for edge thickness via L-Motion Motor →High-frequency cut-off saw equipped with 2 HF motors 0.55 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hoods. Pneumatically tilting from the screen →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with Multifunctional tool (straight + 3 different radius), horizontal and vertical scanning of the work piece; 3 L-Motion motors each for positioning of the horizontal copy shoes, positioning of the vertical copy shoe and positioning of the multifunctional tool →Corner rounding unit : Automatic processing of corner edges up to 3 mm edge thickness. Equipped with 2 high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. 2 L-Motion motors each for positioning of the horizontal copy shoes and positioning of the tool. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, the motorized beam pressure, extensive program memory and fully automatic operation of the processing units via L-Motion Motors →Mulitprofile Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. It is equipped with a multiprofile t

Year of construction: 2005, condition: ready for operation (used), travel distance X-axis: 285 mm, travel distance Z-axis: 1,150 mm, controller manufacturer: FANUC, controller model: 21i-TB, spindle motor power: 7,500 W, spindle speed (max.): 3,200 rpm, number of axes: 3, This 3-axis STUDER S33 CNC cylindrical grinding machine was manufactured in 2005 and completely overhauled in 2026, with 0 operating hours post-overhaul. It features a center height of 175 mm and a center distance of 1000 mm. The machine is equipped with a powerful 7.5 kW motor spindle and a control system with a 10.4" color touch screen. If you are looking to get high-quality grinding capabilities, consider the STUDER S33 CNC machine we have for sale. Contact us for further details. - completely overhauled in 2026- Operating Hours: 0h after overhaul- Center Height: 175 mm- Center Distance: 1000 mm- Machine Base: Mineral cast Granitan S103- Strokes: 285 mm (X-axis) x 1150 mm (Z-axis)- X-axis Drive: AC Servomotor and ball screw, 0° angle, feed rate 0.001–5.000 mm/min- Z-axis Drive: AC Servomotor and ball screw, feed rate 0.001–10.000 mm/min- Measuring System: Incremental scale for X and Z axes, resolution 0.0001 mm- Grinding Headstock: Universal for external and internal grinding, Hirth serration 1° (-15° to +195°)- Motor Spindle (Pos. 2): 7.5 kW, 1400 to 3200 rpm, programmable cutting speed max. 50 m/s- External Grinding Guard: Wheel size D. 500x63mm F1 (80mm F5) with automatic contact protection- Internal Grinding Spindle (Pos. 3): Studer belt-driven internal grinding spindle (180°) with frequency inverter- Workhead Stock: Universal, roller bearing mounted, taper MK5, cylindrical outer nose D. 70mm, spindle bore D. 28mm, manual spindle lock- Workhead Drive: 1.8 kW AC Servomotor, speed range 1–1500 rpm, jog speed 1–50 rpm- Workpiece Weight: Max. 80 kg between centers- Tailstock: Taper MK4, 35 mm stroke, quill diameter 50 mm, hydraulic quill retraction with monitoring, manual fine adjustment +/- 0.04 mm- Pneumatic Lifters: Pneumatic lift-off for easy shifting of workhead and tailstock- Control System: Fanuc 21i-TB with 10.4" color touch screen, integrated PLC, 32KB user memory, 400 program storage slots- Power Supply: 400V +/- 10%, 50 Hz +/- 1Hz, 24V DC control voltage Optional Equipment: - Dittel Sensitron 6 contact detection with magnetic sensor (1 pc)- Movomatic C25 LP active probe- 3 pcs levelling elements- Air conditioning unit for electrical cabinet- Euchner hand-held control unit- Swiveling dresser for internal grinding- Park position for tailstock- 3 pcs Studer belt-driven internal grinding spindles (24,000 rpm / 40,000 rpm / 60,000 rpm)- Foot pedal for C-axis override with open doors- Foot pedal for clamping device actuation (tailstock)- Electrical interface for rotary dressing (spindle optional)- Movomatic in-process gauge control ES 124 control (measuring head optional)- 8 pcs used grinding wheel flanges for external grinding- Various new MK4 centers- Various dressers Additional Capabilities: - Capable of thread and form grinding (software must be requested directly from Fritz Studer AG) Hfodpfxszwd Hgo Agtjl

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: Hfedpfszlbpbox Agtjl The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: excellent (used), Year of construction: 2013, Working area Chuck diameter 160 mm Weight max. 86* kg Swing diameter 200 mm X-travel (working stroke) 380 mm Z-travel 660 mm Loading time (depending on clamping device) 1 – 2 sec. Hfsdpfx Ajvz S Siogtol Main spindle 2 number Spindle flange according to DIN 55026 5 size Spindle bearing – Ø front 80 mm Maximum speed 6000 rpm. Main drive, see description 2 number Feed drive Rapid traverse speed, X 60 m/min. Rapid traverse speed, Z 60 m/min. Feed force in X/Z 3.75 / 7.5 kN Ball screw diameter in X / Z 32 / 40 mm Disc turret, see description Electronic equipment in accordance with VDE 0113 Operating voltage 400 V Control voltage direct current 24 V -alternating current 230 V Frequency 50 Hz Connection value Connection power without Lt 36 kW Connection power with Lt 39 kW Rated current 64 A Supply line fuse 80 A Dimensions and weight Depth 2800 mm Depth including chip conveyor 4350 mm Width 1200 mm Width with automation 1600 mm Height 2500 (2800) mm Weight approx. 7000 kg

Condition: used, Year of construction: 2019, pressure 60.0 t chamfer lenght 1270 mm distance between columns 1000 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 165 mm/sec work stroke 275 mm dayligth 530 mm table height 900 mm table width 90.0 mm back stop - adjustable 500 mm control DA 66T oil volume 150 ltr. voltage 380 V engine output 7.5 kW Weight 4320 kg range L-W-H 2250 x 1960 x 2750 mm current new price approx. 65.000 euros very rarely used! Special price on request - in checked condition - machine video - ?v=KRifrqTgkVU ----- SPEED BEND PRO CNC press brake: * increased installation height * increased cylinder stroke * and increased bending beam speeds ----- Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-66T" graphics/touchscreen * 2D graphic touchscreen programming mode * 3D representation in simulation and production * 17" color TFT screen with high resolution Hodpfezlulpsx Agtjfl * Bending sequence calculation * Product programming and representation in actual size * USB interface - CNC controlled axes: Y1 - Y2 - X - R - CNC electro-motorized back stop (X axis) * on ball screws * Travel path .. 500 mm * Travel speed .. 500 mm/s * with 2x manually adjustable stop fingers - CNC electro-motor height adjustment (R axis) * Travel path .. 250 mm * Travel speed .. 350 mm/s - AMADA/PROMECAM upper tool holder * including clamping jaws with upper wedge camber * 1x ROLLERI split set 60° upper tool - AMADA/PROMECAM lower tool holder * including 1x die shoe "C 1050-R" * 1x AMADA 1-V die 85° - Safety device at the rear (door including safety switch) - BOSCH/HOERBIGER hydraulic components - SIEMENS electrical components - FIESSLER AKAS laser protection device in front of the machine - 2x front support arms with SLIDING system (HIWIN plain bearings) - 1x freely movable double foot control - CE mark / Declaration of conformity - Operating instructions including circuit and hydraulic diagram

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, overall weight: 4,400 kg, Equipped with Iemca Boss 545 barfeed and Mitsubishi M700 Control - the lathe has always operated with oil, in regular working order (bearings and ball screws of the X1/Z1 axes and 2 drives have just been replaced). Hfedeynt U Aopfx Agtsl

Condition: ready for operation (used), Year of construction: 2018, total height: 2,414 mm, total width: 1,110 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 500 mm, overall weight: 800 kg, product length (max.): 1,266 mm, number of axes: 3, This 3-axis Hexagon Tigo SF 05.06.05 was manufactured in 2018. It features a measuring volume of 500 x 580 x 500 mm and a granite measuring plate with high-precision linear ball bearing guideways. The machine supports a maximum workpiece weight of 150 kg and operates without the need for compressed air. If you are looking to get high-quality measurement capabilities, consider the Hexagon Tigo SF 05.06.05 CMM machine we have for sale. Contact us for further details. Hsdpozufkbofx Agtefl - Machine Structure: Cantilever design with steel frame construction- Overall Dimensions (X x Y x Z): 1110 x 1266 x 2414 mm- Table Specifications: Granite measuring plate (fixed desk) with M8 x 1.25 threaded inserts, flatness according to DIN 876/II- Guideways: High-precision linear ball bearing guideways- Measuring System: METALLUR scale, resolution 0.039 µm- Pinion/Ram Counterbalance: Steel spring- Max. Workpiece Weight: 150 kg- Compressed Air Requirements: No compressed air required (does not require compressed air, meaning no air compressor is needed!)- Dynamics (3D Speed): Max. 520 mm/s- Dynamics (3D Acceleration): Max. 1750 mm/s²- Scanning Speed: Max. 300 mm/s- Temperature Range for Guaranteed Uncertainty: 15 to 30 °C- Operating Temperature Range: 10 to 45 °C- Relative Humidity: 40% - 70% non-condensing- Temperature Compensation: Multi-sensor temperature compensation technology- Probe / Sensor Systems Compatibility: Equipped with LSP-X1c touch probe system (Max. probe weight: 33g; Max. probe length: Axial 125 mm, Lateral 60 mm); also compatible with TESASTAR-m M8 / TESASTAR-mp- Controller & Operating System: All-in-one system with integrated PC and controller in the base, adjustable arm mount for screen, keyboard, and lightweight jogbox- Advanced Software Modes: Fly2 Mode (trajectory optimization), Eco Mode (automatic shutdown)

Condition: used, Year of construction: 2011, AXES Working area X-Y-Z axes * mm 3050-1300-180 Workpiece length in swivel machining mm 1390 Stroke X-Y-Z axes mm 3460-1735-250 Max. travel speed of the X-Y axes m/min 60 WORKING TABLE Number of workpiece supports and vacuum cups 6 / 2 Standard type Standard End stops / Position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles Std/Number/Speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles Std/Number/Speed 1/min 6 (4X-2Y) / 4000 Integrated slotting/sawing unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power Std. / Opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer mounted on the unit carrier in X 4 positions, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction nozzle diameter mm 150+150 (200) Machine weight Kg 3000 * X Distance between the stops - Y Milling center as reference point; Z Workpiece passage GENERAL FEATURES CNC-controlled boring and milling center, in C-frame design and working table with adjustable workpiece supports and vacuum cups, for performing: - Vertical drilling on the surface of the panel - Horizontal drilling on all four sides of the workpiece - Slot milling with disc cutter in "X" direction - General milling operations Self-supporting structure and working table Structure made of a steel welded construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV supports. Movable unit carrier Box construction made of cold-rolled steel with internal reinforcing ribs, protective devices with bumpers. Working unit Consisting of a drilling head with vertical spindles, horizontal spindles, an integrated slotting and sawing unit and an SCM electrospindle with tool quick-change system type HSK 63 F. Travel paths of the portal and the unit carrier Movement in the X, Y and Z axis takes place on linear prismatic ball-bearing guides with the aid of pre-tensioned linear guides. The power transmission of the X-axis (movable stand) takes place via a pre-tensioned, backlash-free rack and pinion drive with diagonal movement. The movement of the unit carrier in Y and Z direction takes place via pre-tensioned linear guides. The positioning of the working units and the control of the machine functions takes place via "Brushless" three-phase servomotors and digital drives. CNC CONTROL The control unit consists of a numerical control for the milling and drilling machines and a pre-connected personal computer with a graphical user interface "XILOG PLUS". PC -Office- operating system Windows XP - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine interface software Xilog Plus Xilog Plus features Programming - parametric, graphical and ISO programming Hedeyymz Uepfx Agtsfl - Import of DXF and ASCII files - Linear or circular interpolation in three axes, linear in space, spiral in the chosen plane - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool changes - cycles - Possibility of plate zero-point shift for performing drilling on inclined or curved plate sides - Complete compatibility with CAD/CAM Routocam (SCM) - AlphaCam Integrated additional functions - Calculator for direct transfer of the calculated data.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 525 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, workpiece weight (max.): 1,000 kg, workpiece height (max.): 375 mm, Fully refurbished OPS Ingersoll Gantry 500 Sinker EDM machine – in excellent technical and visual condition The machine has undergone a comprehensive and professional overhaul at our facility and is in very good technical and visual condition. During the overhaul, the machine was disassembled by more than 70%. All relevant wear parts were carefully inspected and replaced if necessary, including ball bearings and drive spindles. Subsequently, a complete geometric measurement, alignment, and additional check were performed using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine was completely repainted and is now in very good visual condition. The generator and control system were cleaned and technically inspected. The generator's air conditioning unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine was subjected to an extensive erosion test according to the quality and testing specifications of OPS Ingersoll. The machine is ready for immediate use and is ideally suited for reliable production operation. Technical data: Ingersoll (OPS Ingersoll) Sinker EDM machine OPS INGERSOLL GANTRY EAGLE 500 Year of manufacture: 2009 Hedpfsyrqpfox Agtofl Control system: EAGLE Powertec PC/NC 2060 MultiProg Powertec technology programming on PC/NC Powertec Easy Burn quick programming Powertec Handheld - multifunctional handheld control unit Manual erosion with Powertec Handheld High Speed Jump max. 18 m/min Generator power 60 Amperes, EAGLE Powertec Travel ranges (X, Y, Z) 525 x 400 x 450 mm Electrode changer: 20-position pick-up disc changer Work tank (W x D x H) 770 x 670 x 440 mm Work table (W x D) 750 x 650 mm Load capacity 1,000 kg Accessories: CO2 fire extinguishing system Integrated cartridge filter system Special equipment: Linear measuring system in all axes (Z as standard) 1

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Condition: used If you have any further questions or require more information, please do not hesitate to send us a message or give us a call. If needed, the order confirmation with all technical details can be sent. 1 workpiece transport system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece transport Feed speed adjustable from 5 to 25 m/min, frequency-controlled, working height constant at 880 mm, including integrated control cabinets; Including adjustable stop ruler with digital readout and including counter fence with central width adjustment with central height-adjustable and laterally adjustable top pressure bar with digital display, which presses plate-shaped workpieces with ball-bearing rubber rollers (roller pitch 38 mm), including support rollers to extend the support for large workpieces, extendable sideways by approx. 1,500 mm. 4 side guide rollers between the sanding units for secure transport of strips 1 Industrial PC 3.0/4" LCD-TFT color display, 800 x 600 pixel resolution Hjdpfjy A D Ecex Agtjfl CF card 1GB Operating system: Windows Embedded Standard Touch-screen version with display for production and downtime periods. Ethernet connection available. 2 belt sanding units "M 4" – positions 1 and 2 for sanding straight edges, with intermittent belt blow-off device, belt break detector, tool holder with quick-change device, base plate for sanding tool, prepared for electronic path control for automatic engagement and disengagement of the sanding tool, operating in both climb and counter rotation. Belt dimensions: 2,300 x 80 mm Belt speed: 0/7–12 m/s Motor rating: 3.0 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 2 oscillation devices (positions 1 + 2) For optimal belt utilization 2 belt sanding units "K 4" – positions 3 and 4 incl. stand, for sanding small profile sections, also suitable for edge rounding; can be swiveled 90° upwards and 45° downwards, belt break detector, tool holder with quick-change device, base plate for sanding tool, intermittent belt blow-off device, prepared for electronic path control for automatic engagement and disengagement of the pressure tool, including climb and counter rotation, designed for manual adjustment and digital indicators for the adjustment axes. Belt dimensions: 2,000 x 50 mm Belt speed: 0.5–8 m/s Motor rating: 1.1 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 4 electronic path controls for fully automatic, timed engagement and disengagement of the sanding tool depending on the set feed speed, sanding pressure, and angle position of the units. 2 steel tools for straight edges, equipped for air cushion sanding, incl. base plate, for 1 "M4" unit, item no. 9000191310 2 steel profile tools equipped for air cushion sanding, incl. base plate, for 1 "K4" unit, item no. 20000025684

Condition: used, Slewing bearings, slewing ring, single row ball slewing ring, four-point bearings -Comes from: HUSS Rides manufacturer of leisure facilities -Spare part: from Flic Flac connection from gondola Hodscgf R Ajpfx Agtjfl -Manufacturer: IMO -Type: 001625 -Type: IMO 33/95 -Outer diameter: 624 mm -Inner diameter: 355 mm -Height: 98 mm -Number: 2x bearings available -Price: per piece -Weight: 118 kg

Year of construction: 2003, condition: ready for operation (used), An EMAG CNC vertical lathe is available. Chuck diameter: 250mm, orbital diameter: 260mm, travel X/Z: 570mm/200mm, rapid traverse X/Z: 60m/30m/min, feed force X/Z: 5kN, ball screw diameter X/Z: 40mm, spindle bearing diameter front: 110mm, speed: 4500rpm, power: 18/28kW, shank diameter: 40mm, power of driven tools: 12kW, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2700mm/2100mm/2400mm, weight: approx. 7000kg, switch-on time: 50416h, automatic time: 9016h. Documentation available. On-site inspection is possible. Hfodpfovva Hkjx Agtol

Condition: used, Rolling bearings, ball bearings, SKF bearings, SKF, spherical bearings, roller bearings -Type: 24056 CC/ W33 -Lubricating groove -Bore: Ø 280 mm -Outer diameter: 420 mm -Width: 140 mm Hodpfjd Nw H Ajx Agtefl -Weight: 74 kg

Condition: ready for operation (used), Year of construction: 2025, Kaiser Press 50 -Exhibition machine / 0 operating hours -Electro-hydraulic drive -Operation: foot pedals and push buttons on the control panel -Maximum pressing force: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V Hsdpeztfbwjfx Agtsfl -Frame width: 930 mm -Maximum frame width including hand crank and electrical unit: 1300 mm -Overall height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm threaded spindle -Usable width – working area inside: max. 750 mm -Usable height – working area: 0 mm to 780 mm -Frame depth: 220 mm -Overall depth with base: 535 mm (can be fastened to the floor) -Support depth of the height-adjustable work table (crossbeam): 245 mm -Crossbeam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the crossbeam via hand crank (no manual lifting required) -Hydraulic unit can be moved laterally: 300 mm (ball-bearing mounted in the upper guide area) -Includes 8 punches with integrated holder: -2t with Ø9.8 mm -3t with Ø11.7 mm -6t with Ø15.7 mm -8t with Ø17.7 mm -10t with Ø19.8 mm -12t with Ø21.8 mm -13t with Ø24.8 mm -15t with Ø30 mm -Welded construction -Includes work light to illuminate the working area -Pressure gauge with pressure display -2 prism supports included -Automatic piston retraction -Integrated tool tray in the lower area of the press Dimensions: L x W x H 0.9 x 0.3 x 1.9 meters / Weight 255 kg Errors and omissions excepted.

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Hfjdpfxjw E H E Re Agtsl Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, Hfsdpfxjzuykve Agtol 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order