Ball screw buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
3
Ballscrew of scm record 120 S, Y axis D = 32 P = 25 L = 1630 used, tested, nearly backlash-free Ft0g2bl more
6

Ballspindle INA INA40X10

ISERLOHN, GermanyGermany dealership location
6437 km
2005
used
1.Kugelrollspinde INA diameter 40X10mm slope total length: 1400mm Br8ob New. more
5
1 piece of ball screw shaft / ball screw -Make: Rexroth-star -Spindle length: 7000 mm -Spindle diameter: 40 mm -Pitch: 20 mm, doppellaeufig Vnrgw -with ball recirculating nut -with mounting brackets, double-sided more
2
AB04k28. 44 B3spke2 Spindle diameter = 61 mm Thread length = 9.050 mm (stroke = 8.960 mm) Total length = 9,300 mm Nut length = 90 mm Slope = 10 mm more
6

Servo motor with ballscrew Elmo EP075112-44T3BB

Tatabánya Rigómajor, HungaryHungary dealership location
7323 km
used
Servo motor with ballscrew (number: 3668) Manufacturer: Elmo Type: EP075112-44T3BB 400V Max speed: 3000 rpm Torque: 1,7Nm Brakes: 24VDC 2Nm Size: 300 * 80 * 120 mm 7gzd90jhz Spindelschaftlaenge/diameter: 810 / 30mm more
2
Ballscrew = 1984, Y-axis author 504, L 0586312002E get used, nearly backlash-free, very good fits also on some other machine of series T3kpf8xf Installation and a possible measure, please request a quote more
2
any spare part for milling MECOF Ypy830 Spindle diameter = 63 mm Thread length = 1,450 mm Total length = 1.715 mm Thread pitch = 20 mm Nut diameter 95 mm = = Flange diameter 140 mm + 6 ball bearings more
2
Ballscrew Z axis scm Routron B used, tested, backlash-free Nasjn more
6

Multi-Spindle Screw Machine Schutte SF26 S DNT

Oak Forest, United StatesUnited States dealership location
898 km
1999
used
Schutte SF26 S DNT Multi-spindle Screw Machine. Mfd. 1999. 6-spindles. Pickoff Attachment. 6 Slides. 4 meter Pietro Cucchi Bar Loader. V28km2su more
5

Flanged Ball Valve metso L2DMH16PACAG

Wiefelstede, GermanyGermany dealership location
6385 km
used
Wru2tl0cz more


ball screw
daily

New machines via email!

Stay updated!
6
Technical data screw compactor Manufacturer Bollegraaf Typ RotoPack 600 Year of construction 1997 (one machine) / 1998 (one machine) Hmzvqsdao Drive power 7,5 kW Height of drive axle over floor 600 mm Diameter of screw flange 620 mm Dimensions of filling opening without funnel 1,700 x 800 mm (l x w) Min. height of filling opening without funnel above floor 1,176 mm Machine dimensions without hopper 2,100 x 1,200 x 1,176 mm (w x d x h) Weight approx. 3 tons each Comments: These machines are sui... more
9
Demonstration Machine available immediately: RENNER RS-18,5 oil-injected screw compressor. Made in Germany The compressor is in very good condition with 3 operating hour. Pressure: 10 bar Rated power: 18,5 kW Delivery quantity: 2620 liters / min Sound level: 71 dB (A) Compressed air output: 1 1/4 " Dimensions Length x Width x Height: 1287 x 799 x 1296 mm Weight: 532 kg Operating hour: 3 Bh Bbo89ugpol Warranty: 6 months from date of purchase more
4

Screw press BERRENBERG RSSP 200

Gammertingen, GermanyGermany dealership location
6689 km
1979
used
Permanently permissible maximum force: 400 ton Screw diameter: 200 mm Stroke: 280 mm Number of strokes: 56 [...] Daylight: 400 mm Table surface area : 560 x 610 mm Ram surface area: 560 x 510 mm Bbpdocyqvj Weight of machine approx.: 13 ton more
15

screw conveyor IMRO Maschinenbau ISP 800x11560

Grafenwöhr, GermanyGermany
6796 km
2007
ready for operation (used)
Nf3q7 more
1
volume capacity 5,63 m³/min 1 bar 8 bar turning speeds 3000 U/min engine output 37 kW total power requirement kW Bahj8mmauf weight of the machine ca. t dimensions 1,35 x 1,05 x 1,43 m more
6
Pos. 30 Ballistic separator Manufacturer Stadler Type BS 2150-06-04-131 Year of manufacture 2007 Use as PPK separator Throughput capacity up to 12 tons/h Equipped with 6 pcs. oscillating paddle 6,200 mm long Drive power 5,5 kW Dimensions ballistic separator 6,160 x 2,450 x 1,550 mm (l x w x h) Weight approx. 3 tons Dimensions steel construction 9,300 x 6,600 x 4,200 mm (l x w x h) Pos. 50 Fine grain belt underneath the ballistic separator Manufacturer Stadler Type sliding belt conveyor Centre ... more
6
frequency-controlled screw compressor RENNER RSF-PRO 7,5 Year of construction: 2017 Operating hours: 3346 Bh Technical specifications: Type: RSF-PRO 7.5 (made in Germany) Possible operating pressures of the system: 6 - 10 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Annex C: at 6 bar (g): 0.42 / 1.37 m³ / min at 7 bar (g): 0.41 / 1.30 m³ / min at 8 bar (g): 0.39 / 1.24 m³ / min at 9 bar (g): 0.36 / 1.18 m³ / min at 10 bar (g): 0.33 / 1.09 m³ / mi... more
3

Screw Compressor GSI AMD 18/AC

Göppingen, GermanyGermany dealership location
6699 km
2010
used
feed pressure unbek. bar Cvf8iyn8y liter capacity unbek. l total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
5

Compressors HYDROVANE 68E 60 cfm Rotary screw Compressor

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 5hv699601/8809 Bcigct9qgq Input 415/3/50 11 kW CFM 60 PSI 100 Length 4' Width 2' 6" Height 4' 8" Nett weight actual. 380 Kgs / 0.37 Tons more
15
We offer: from liquidation flange ball valve TCP DN50 PN 16 cast full bore Manufacturer: TCP diameter: 50 mm pressure: max 16 bar Installation length: 150 mm Hole circle: 125 mm Height with tap: 240 mm Material: Cast Description of product from part: - EN GJL-250 150501 - 150502 weight: 8 kg condition: unused from stock, see photos Other technical assets, workshop equipment and metalworking machines as follows on offer: - emergency power generator 270 kVA in containers motor MB Reparaturbedürft... more
6
Manufacturer Bollegraaf Typ HBC 100 F Year of construction 1993 Hours of operation 50,848 h Press power main press 100 tons Press power of pre-press 50 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 22 sec. Bale size 1,100 x 720 mm Driving motor 75 kW Tying system 5 fold vertical, full automatic Throughput rate at a bulk weight of 30 kg/cbm approx. 12 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weig... more
6

ROMACO AG MS-50 COBALL

MA Barneveld, NetherlandsNetherlands dealership location
6274 km
ready for operation (used)
Bczozwvsve more
6

5 crane-traverses 6-40 to several Balla 2-40 tons

Borken-Burlo, GermanyGermany dealership location
6360 km
2001
used
Q7v8ew28 more
1

Compressors ALUP SCK 45 275 cfm Screw Type Compressor and Drier

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
2004
ready for operation (used)
Capacity 275 cfm Input 415/3/50 45 kW Compressor unit screw type CFM 275 Features Hankison dryer Length compressor 1.4 m dryer 1.25 m Width 0.9 m 0.6 m Bcigckoksp Height 1.65 m 1.25 m Nett weight actual. 1130 Kgs. (1.11 Tons) more
6

screw press KIESERLING & ALBRECHT FS 450

Ennepetal, GermanyGermany dealership location
6422 km
1955
used
pressure 450 t 9dyh2w2kv Stroke 1000 mm table surface area 1200 x 750 mm spindle diameter 300 mm weight of the machine ca. 75 t total power requirement 25 kW dimensions of the machine ca. 3,5 x 2 x 5 m Friction screw press with extra wide table, spare screw and nut. Machine will be delivered with an oven fired with gas. more
5

Balluff BIS F-403

Wiefelstede, GermanyGermany dealership location
6385 km
used
Bt8u8yo more
5
SCL boge 1250 2 piston compressors, S20 Boge Boge SB 675-25/350 and a screw compressor with accessories (Öwamat, refrigerant dryer and filter) Bcvlbi0gla more
11
Exhibition machine immediately available (Plug and Play): RENNER RSK-PRO 7.5 - 10 bar oil-injected screw compressor with integrated dryer The compressor is in good condition with only 4 hours of operation. Domestic equipments: Control: RENNERtronic - compressed air dryer Hmicidz7m Pressure: 10 bar Rated power: 7.5 kW Delivery quantity: 1.09 m³ / min Sound level: 63 dB (A) Compressed air outlet: 1/2 " Dimensions length x width x height: 995 x 554 x 1014 mm Weight: 248 kg Operating h... more
2

screw compressor MARK MSB 22 / 8

Dreieich, GermanyGermany dealership location
6568 km
2006
used
feed pressure 8,0 bar liter capacity 3,53 m³/min Number of working hours 22.496 h voltage 400 V total power requirement 22 kW weight of the machine ca. 435 kg dimensions of the machine ca. 1,30 x 0,80 x 1,20 mm Cp8jfapy more
7
Serial No. 6987 Table size 1000mm x 1000mm Longitudinal traverse 1000mm Cross traverse 1250mm Swivels 360 degrees Head stock vertical traverse 1000mm Input 415/3/50 ac 7.5 kW Spindle & facing speeds 5.6 - 280 rpm Spindle speeds 180 - 1,120 rpm Feed rate 0.72 - 3,800mm per minute Facing head diameter 500mm Facing head slide cross traverse 160mm Spindle traverse 500mm Spindle diameter 75mm Bores 40 int Digital read out Anilam 2 Axis Fitted with 1 x Spindle Support Length 14'6" / 4.42m Width 9'6" /... more
2

screw press WEINGARTEN P 180

Ennepetal, GermanyGermany dealership location
6422 km
1955
used
pressure 240 t Stroke 130 - 380 mm no. of strokes 21-31 Hub/min table surface area 620 x 620 mm ram surface 550 x 550 mm weight of the machine ca. 15 t total power requirement 17 kW dimensions of the machine ca. 1,8 x 1,8 x 3 m spindle diameter 180 mm D0ur3v7wu Screw press with direct drive more
6

screw compressor COMPAIR L37-10

Leipzig, GermanyGermany dealership location
6734 km
2002
used
drive power: 37 kW Pressure capacity: 10 bar intake pressure max.: 1,0 bar volume throughput: 5,43 m³/min revolutions per minute of the motor:: 3000 U/min intake pressure max.: 1,0 bar Compressor device with dryer and pressure air tank techn. details: compressor: Compair L37-10;380V; 3000 rpm; L:1,5xB:1,1xH:1,4m dryer: AIR DRYER, Typ: Com 90, [...] R407C;[...] 16bar; Temperature 55°C pressure air tank: Fabrikat Boge, content 1000 Liter; Comp... more
10
Demonstration machine immediately available (Plug and Play): RENNER RS-PRO 7.5 - 10 bar oil-injected screw compressor system the compressor is in good condition with only 1 working hour. Domestic equipments: Control: RENNERtronic -Schalldämmbox CEE plug 32 A with phase converter Direction of rotation monitoring Phase sequence relay Pressure: 10 bar Rated power: 7.5 kW Capacity: 1.09 m³ / min Sound level: 63 dB (A) Bcvlwemqfg Compressed air outlet: 1/2 " Dimensions length x width x ... more
1
Screw compressor Atlas Copco type: GA 45 – 10 P year of manufacture: 1994 full automatic, air cooled, sound proof suction pressure 1 bar suction temperature 20 °C relative humidity 0% turning speed 3404 rpm volume flow (DIN 1945, Anhang F) at overpressure 10 bar 103,5 l/s 6,21 m³/min. 8,0 bar 105,6 l/s 6,34 m³/min. 6,0 bar 107,6 l/s 6,46 m³/min. Power supply of compressor including ventilator at overpressure 10,0 bar 47,75 kW, 8,0 bar 41,65 kW, 6,0 bar 35,85 kW Bcpvk08... more
12
Serial No. 7018-4 Table Size 48" /1219mm Swing 60" / 1524mm Cxn2oev Height under cross slide 60" / 1524mm Cross slide rise & fall 36" / 914mm Turret rise & fall 38" / 965mm Turret traverse 41" / 1041mm Speeds 10.5-234 rpm Feed rate 0.10mm-5mm Per Rev Input 415/3/50 ac 30 kW Fitted with Swarf Conveyer, Enclosed Guarding, 4 x Table Jaws and Turret Tooling Length 11'6" / 3.51m Width 11'6" / 3.51m Height 11'10 / 3.61m Nett weight actual. 14.1/2 ton / 14,732 kgs more
1

C7 BOGE screw compressor

Eching, GermanyGermany dealership location
6861 km
ready for operation (used)
400 €
Offer
Another 4 days
C7 BOGE screw compressor 1 piece: No. 5031084, 55 kW Hmg2qk8rk Item number: 000047501 location: 76275 Ettlingen more
5

Ball groove milling EXCELLO XG 610

Staufenberg, GermanyGermany dealership location
6540 km
1992
used
travel of compound slide-rest:80 mm longitudinal feed:595 mm longitudinal feeds of table:90 mm height over floor:1030 mm E2scihhtu weight:8,5 t connected load:30 kW :1950 x 2200 x 2000 mm Sinumerik System 3 Fully automatic ball grove milling and finishing milling Machine for simultaneous milling of ball raceways in CV Joints Axis tap / chamfer and undercut at Station 2 Finish milling station 3 Guideway contours are generated automatically by hydraulic copy control! 2-spindle machining! more
4
516/5000 Exhibition machine immediately available (Plug and Play): KAESER ASK 40 SFC - 8 bar frequency controlled screw compressor the compressor is in very good condition with only 1 working hour. Control: SIGMA CONTROL 2 Pressure: 8 bar Rated power: 22 kW Bcu838odwj Delivery quantity: 0.94 m³ / min to 4.19 m³ / min Speed range min - max: 900 to 3741 rpm Sound level: 70 dB (A) Compressed air outlet: 1 1/4 " Dimensions length x width x height: 800 x 1100 x 1530 mm Weight: 550 kg Op... more
2
screw size 80 mm Capacity bis 120 kg/h Drive 35 kW L/D 30 L/D engl.: Q2mvmwxvg complete granulating line for low bulk-weight materials like E-PS incl. strand-pelletizing equipment, very less operating 7000 hours more
4

Screw press WEINGARTEN P 180

Gammertingen, GermanyGermany dealership location
6689 km
1962
used
Permanently permissible maximum force: 240 ton Ram surface area: 180 mm Stroke: 130 - 380 mm Number of strokes: 21 - 31 [...] Daylight: 250 - 650 mm Table surface area : 550 - 610 mm Bbpdomjwjk Ram surface area: 530 - 550 mm Required power: 17 kW Height over floor approx.: 3.300 mm Weight of machine approx.: 12 ton more
5

screw compressor ECOAIR D40

Leipzig, GermanyGermany dealership location
6734 km
1991
used
feed pressure: 10 bar liter capacity: 3000 l volume capacity: 4,05 m³/min Number of working hours: 16160 h Bmxys0ku total power requirement: 30 kw weight of the machine ca.: 0,67 t space requirements of the machine approx.: 2,2x0,9x1,65 m compressor: ECOAIR Type 4050.6210.2 operational pressure 15bar air pressure tank make Otto Boge 3000l , tank diameter 1300mm, height=2,9m, 0,8t YOM 1971, operational pressure 10,8 bar, optional for 500,00 Euro [...] more
1

ball header HILGELAND CH1KK

Norderstedt, GermanyGermany dealership location
6479 km
1974
used
partly overhauled 2015 diameter range 3-8 mm max. dia. of wire 6,5 mm Ucruyjozo output - pieces/min 630 more
9
Used compressor available immediately (Plug and Play): RENNER RSK-TOP 15 - 10 bar oil-injected screw compressor Gvoeys with integrated refrigerant dryer and level controlled steam trap Control: RENNERtronic The compressor is in very good condition (see photos) with 888 operating hours. Pressure: 10 bar Rated power: 15 kW Delivery quantity: 1.96 m³ / min Sound level: 66 dB (A) Compressed air outlet: 3/4 " Dimensions length x width x height: 1272 x 575 x 1255 mm Weight: 357 kg Operati... more
4

Compressor BOGE SOLIDscrew 7 RD - 13bar

Ahaus, GermanyGermany dealership location
6367 km
2018
used
feed pressure 13 bar Effective free air delivery 850 L/min motor 400 V 0 500 Liter Gzoq70ec8 weight of the machine ca. 500 kg. dimensions of the machine ca. 1915 x 650 x 1640 mm total power requirement 7,5 kW more


ball screw
daily

New machines via email!

Stay updated!

to

to

Edit search
BALL SCREW
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close