Hydraulic guillotine shear

HACO TS 2006

Condition: excellent (used), Year of construction: 2001, sheet width 2050 mm plate thickness 6.0 mm cutting angle adjustment 0.5 - 3.0 ° down holder 12 Stück no. of strokes 8 - 14 Hub/min back stop - adjustable 750 mm work height max. 770 mm Ljdjz St Rpspfx Ab Aeru Control konv. total power requirement 7.5 kW weight of the machine ca. 3800 kg. range L-W-H 2650 x 2100 x 1750 mm From a maintenance workshop Very good condition (!!) Features - Robust, slide-guided electro-hydraulic panel shear - HACO control panelâ??front left * Easy operation directly at the cutting table * Adjustment of cutting angle and backgauge * Emergency stop button, latching - Electromotor-driven material stop/backgauge * Fine adjustment with handwheel (front left) - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front * Eccentric adjustment - 1x long side stop - Front finger guard - 1x freely movable foot switch - Rear sheet metal chute - Operating instructions

Condition: like new (used), Year of construction: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel 0.2 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display ensures easy and intuitive programming and operation. Once the tube is loaded, it is fixed in place by the chuck in the carriage, enabling precise tube positioning and the production of dimensionally accurate geometries. Standard features include tube geometry verification before the bending process: if the bending operation is initiated at an incorrect position, the machine will not grant approval, reliably preventing operator errors. Optional features offer greater convenience, increase output, and therefore improve the machine's efficiency. Data exchange with the optional TBS-3D tube calculation software (PC version) is performed via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for bending axis, 1.5 kW → Adjustable rotation speed Lrjdpfx Ajtr U Hljb Aou → Left-hand bending direction → Bending angle resolution 0.1° → Maximum bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive feed → Servo drive rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control System: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphical programming: simple geometries can be calculated directly on the machine. After inputting length and angle, the control automatically calculates the feed values and bending angles. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Condition: used, Year of construction: 1993, Technical details: sheet width: 3150 mm plate thickness: 13 mm distance between columns: 3670 mm Knife length: 3150 mm down holder: 18 Stück back gauge: motorisch 1000 height over floor: 850 mm operating hours: 3256 Table dimensions: LxB: 3770 x 500 mm total power requirement: 30 kW weight of the machine ca.: 12,9 t dimensions of machine: 4,4 x 2,8 x 2,4 m Short stroke Continuous run Lrsdou Icnfjpfx Ab Aou Gap lighting Hydraulic sheet metal lifting device rear light curtain Positionable backgauge *

Condition: excellent (used), working width: 3,000 mm, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, cutting length (max.): 3,100 mm, table length: 3,000 mm, Used Very Clean Hydraulic Industrial Sheet Metal shear / Guillotine Edwards Pearson VE shear 3metre x 10mm in excellent used condition For Sale Lrodjuv Hpijpfx Ab Aou Capacity 3070mm x 10mm. Squaring Arms and Work Supports. Front operated Powered Back Gauge Serviced with Bystronic UK Complete with: Swissax 2000 control with automatic backstop blade gap adjustment and rake adjustment

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Sheet metal width: 2050 mm Sheet metal thickness: 4 mm Stroke: 41 mm/min Table height: 850 mm Machine weight (approx.): 2,900 kg Lodpfx Abszbarns Ajru Dimensions: 2700 x 2200 x 1400 mm

Condition: good (used), Year of construction: 1997, machine/vehicle number: 68868, Offer 25500 Technical Data: - Cutting length: 3050 mm - Cutting thickness at 400 N/mm² tensile strength: 13 mm - Cutting thickness at 400 N/mm² tensile strength (up to 1000 mm length): 15 mm - Cutting angle: 0.5 – 3° Lodpfjx A Tpnjx Ab Ajru - Number of sheet hold-downs: 18 pcs - Strokes per minute: 10 – 23 min⁻¹ - Motorized backgauge up to: 1000 mm - Rear guard with light barrier - Front angular stop: 1000 mm - HSLX version: – CNC control HACO SC 5 Controller with input of sheet thickness in mm – Automatic cutting angle adjustment according to sheet thickness – Limit for cutting length – Automatic positioning of backgauge (8 programs – 80 sets) with digital display and automatic backgauge retraction – Motorized backgauge adjustment possible via 2 push buttons - Drive: 400 V / 22 kW - Electric foot switch - Space requirement without support arms: approx. W 4200 x H 2250 x D 2200 mm - Weight: approx. 8500 kg

Condition: used, functionality: unexamined, Year of construction: 2007, control type: PLC-controlled, working width: 3,000 mm, cutting angle (max.): 3 °, sheet thickness brass (max.): 12 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, overall weight: 8,500 kg, SP8 control system capacity 3000 x 12 mm power 22.5 kW electric stops weight 8500 kg Lsdeznvgmspfx Ab Ajru

Condition: used, Year of construction: 2021, machine/vehicle number: 168600, Reference No. 26029 Technical Data: Lredpsywhuwsfx Ab Asu - Max. cutting width: 2080 mm - Max. cutting capacity at 45 Kp/mm²: 6 mm - Throat depth: 150 mm - Automatic cutting angle adjustment: 0.3 – 2° - Automatic cutting gap adjustment - Number of hold-downs: 10 pcs - Strokes per minute: up to 22 1/min - Front angle gauge approx.: - 2 front support arms approx.: - Motorized backgauge with positioning control up to 1000 mm - Rear area safety device with light barrier - Cutting line illumination - Working height: 860 mm - Electric foot switch - Drive: 400 V / 11 kW - Space requirement approx.: W 3150 x H 2150 x D 2300 mm - Weight approx.: 4.8 t

Condition: good (used), functionality: fully functional, Year of construction: 1998, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, back gauge: 1,000 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 18,400 kg, total length: 4,400 mm, total width: 2,350 mm, total height: 2,250 mm, cutting length (max.): 4,100 mm, Equipment: finger protection, safety light barrier, Cuttinglength: 4.100 mm Lredpfxewc Sahe Ab Aeu Cutting thickness: 13 mm Back gauge: 1.000 mm Control: Darley Delem Featured with: - Sheetsupporters frontside 4000 mm - Footpedal - Material conveyor - Extra sets knives - Documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 440 x 235 x 225 cm Machine weight: 18.400 kg

Condition: good (used), Year of construction: 2006, sheet width 2050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2100 mm down holder 12 Stück no. of strokes max. 26 Hub/min cutting angle 1.6 ° back stop - adjustable 750 mm Control ELGO oil volume 120 ltr. total power requirement 11.0 kW weight 3900 kg range L-W-H 2860 x 2100 x 1560 mm with only approx. 400 operating hours (!!) Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, * for electric backgauge - NC-controlled electric motor-driven material/backgauge * Travel range continuously adjustable backgauge X = 750 mm * Backgauge with backlash-free ball screw * Travel speed: 100 mm/sec Ledpfxeznngxe Ab Aoru - 1x sturdy side stop * with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter * Cut length limiter to increase the number of strokes per minute - Manual kerf adjustment * Operated centrally from the right-hand side stand - Front support plates with ball bearings - Front finger/interference guard - Jog mode with push buttons on the left control panel - Protective guard = safety device behind the machine - Operating instructions (PDF)