Megalift FSE 7.1 2244/816-9010 Year of construction 2007
Dimensions W/D/H in mm 2632, 2930, 9010
(The machine can be individually adapted to your room height)
Useful area carrier WxD in mm 2244x816 corresponds to 1.83sqm/carrier
payload425kg/carrier optional 650kg/carrier
Colour RAL 7035 light grey
Bryixj0ne9
Number of basic carriers 40, more if required
unit is "checkbook" maintained
Bryipikvie
Special equipment: sliding door, emergency stop left
Unit is delivered with 1 year warranty for end c...
Material clamp, material gripper, load clamp
carrying clamp, lifting clamp, block tongs
Manufacturer: NORDGREIF Type 7548
Year of construction: 1997
Bder0b0lil
Load capacity: 500 kg
Gripping width: 280 to 420 mm
- Width adjustment via trapezoidal thread with hand crank
- Rubber protective coating on the gripping surfaces
- for crane operation
- with CE-marking
Own weight: 50 kg
sound condition
Megalift FSE 3.5 1836/816-5010 Year of construction 2006
Dimensions W/D/H in mm 2300, 2750, 5010
Useful area carrier WxD in mm 1836x816 corresponds to 1.49sqm/carrier
Load capacity 290kg/carrier
Colour RAL 7035 light grey
Bryipikvie
Number of basic carriers 25, more if required
unit is "checkbook" maintained
Special equipment: sliding door, emergency stop left
Unit is delivered with 1 year warranty for end customer
Transport and assembly included
Tests according to DGUV 108-007 / DGUV V3 by qual...
Mercedes Benz Category: Engine parts Description: Main bearing set undersize 0,25 mm Engine type:OM 636 Fitting for: Engine type: OM 636 VPE:1 Weight: gr. OEM no:
Dawycweki
Stopa warehouse for 18 pallet to 3 ton.
Bonaxlklzd
1250x2500 format.
Is disassembled and ready for shipment. The price is only for Stopa systems without FMC and Trumpf machine.
Universal wheel bearing puller, bearing puller, wheel hub puller set (AUTM-01688). 20-piece wheel bearing puller set for removing and installing wheel bearings with an assembled suspension strut. The tool is suitable for the most common car makes. It is not necessary to remove the struts/ wishbones. The tool set is supplied in a sturdy plastic case. Resistant to high pressure capacities. Specifications: 20 piece hardened steel assembly set of a very good quality. The tools are made of high qua...
Kramer Category: Engine parts Description: Main bearing standard, : 55,0 mm Engine type:KD 211 Z Suitable for: Engine type: KD 211 Z VPE:1 Weight:440 gr. OEM no:
Daxs398vc
Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine
-Swallowtail: each 150 by 181 mm 48 mm high
-Drawing with the photos
Ql8nafhox
-Dimensions: 390/115/H310 mm
-Weight: 34 kg
Wheel bearing puller, pressure set, 72 mm for VAG (AUTM-02050). Simplifies the installation of wheel bearings Suitable for Audi A2 and Skoda Fabia from 2000 VW Polo IV , Seat Cordoba and Seat Ibiza IV from 2002 VW Fox from 2005 For other vehicles with a 72 mm wheel hub Heavy duty ball bearing spindles Mounting plate with eight side bores Five pressure pins Two split mounting shells Wheel bearing puller 72 mm VAG, Wheel bearing pull set , Bearing pull set Wheels. Wheel bearing puller set to assem...
Kramer Category: Engine parts Description: Connecting rod bearing standard, : 62 mm Engine type:KD 211 Z Suitable for: Engine type: KD 211 Z VPE:1 Weight:151 gr. OEM no:
Jnwt3fjl
Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine
C009dp0k
-Swallowtail: 75 by 110 mm 25 mm high
-Drawing with the photos
-Dimensions: 215/70/H200 mm
-Weight: 10 kg
Static warehouse for hanging textiles
- Individually plannable
- Hanging levels freely plannable
- Integrated trolly track
- Height jumps from floor to floor possible
Iwgykwf
Price on request
Transport possible for an additional charge
Bgs 10-piece Inner bearing puller set (art. 7710) 1x impact hammer 910 g, length 285 mm - 1x puller with a 125 mm puller range - 5x puller bolt for pulling inner with in sizes 8 to 34 mm - 3x adapter for removing components with inner threads in the following sizes: M6 x 1.0 - M8 x 1.25 - M10 x 1.5 - Puller bolt and adapters for use with impact hammer and two-arm pullers
Bqldhw2asx
Wheel bearing puller, Wheel hub puller 82 mm, Ford, Land Rover and Volvo (AUTM-01380).Suitable for mounting and dismounting the wheel hub and wheel bearings of the 2nd generations. ( GEN2). That means a wheel bearing with a flange that cannot be disconnected. Content of this set is : Bearing: 82 mm Pressure plate with ball bearing spindle Screw M20 x 2.0 hex 22 mm 2 half shells for disassembly 82 mm 2 screws to fix the half shells 4 bolts 74 mm 4 bolts 100 mm Removable adapter Mounting adapterSu...
Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine
Qlfeyqnz9
-Swallowtail: each 150 by 181 mm 48 mm high
-Drawing with the photos
-Dimensions: 380/110/H310 mm
-Weight: 32 kg
Warehouse stage 16,000 x 5,000 mm, capacity 500 kg / m ²
I7odfhyg8
Dimensions / technical data
Dimensions steel construction: 16,000 x 5,000 mm
Dimensions surface Max: 16,000 x 5,000 mm
Floor area: approx. 80 m ²
OK height flooring: up to 3,500 mm (freely selectable)
height bottom: OK minus 338 mm
net capacity: 500 kg / m ² gleichm.verteilte load
Included in the scope of delivery:
10 stand on one side of 100 x 100 x 3 mm 8 main beam C + 300 x 3 mm, L = 3,990 mm
18 crossbar S + 300 x 2 mm,...
Wheel bearing tool, Wheel bearing puller Wheel bearing assembly press set, pressure set (AUTM-01995).Description:Universal set for VW, VAG group, Audi BMW Ford Seat Skoda Opel Wheel bearing installation and removal especially for the front wheel drive vehicles, but of course suitable for all wheel bearings. Universal set for all car wheel bearings to install and remove. Replace the wheel bearing without dismantling the stub axle, and thus save time and you can work with it while the whole is sti...
Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine
-Dovetail: 125 by 160 mm 25 mm high
-Drawing with the photos
Ql8njwncy
-Dimensions: 300/110/H205 mm
-Weight: 14 kg
300269 Grip olives and corner bearing drilling machine Götzinger type OBM Plus, machine for drilling of corner bearings or for drilling of grip olives, as good as new/unused,
Consisting of:
Machine OBM Plus,
To7xn73g
Drill head corner bearing,
2 x drill corner bearing,
Drill head grip olives,
2 x drill bit handle olives,
Roller conveyor R/L 1,5 m,
Stop system for central drilling
Warehouse stage 4,000 x 15,000 mm, capacity 500 kg / m ²
m delivery are included:
4 stand, on one side of 100 x 100 x 3 mm
4 stands, double-sided 100 x 100 x 3 mm
6 main carrier C + 300 x 3 x 4.190 mm
15 crossbar S + 300 x 2 x 4,800 mm
30 mounting bracket
4 Cross associations
27 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature
UK white, OK nature
incl. mounting material
including load signs
I7oaf298u
Dimensions, technical data
Steel construction: 4,000 x 15,000 mm
Floor space: 60 s...
Inner bearing puller set, wheel bearing puller, blind hole bearing puller, inner bearing puller set (AUTM-01128) This inner bearing puller is pecially suitable for small to medium sized inner bearings to dismount from the inside. You grab the bearing from the core and knock it out. Contents of this set: 38 cm long puller of 900 grams 4 adjustable pull adapters (10-14, 15-19, 18-25, 25-32 mm) An inner bearing puller from 10 mm to 14 mm An inner bearing puller from 15 mm to 19 mm An inner bearing ...
Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine
29kqqrnh
-Swallowtail: 178 by 193 mm by 15 mm high
-Drawing with the photos
-Dimensions: 280/85/H160 mm
-Weight: 8 kg
We are clearing our accessories warehouse!
For sale are various accessories / machines:
Tools of all kinds
Tool holders SK 50 and SK 40
Boring heads for boring mills + bed type milling machines
Chuck for drilling machines
Bk9fryfe0e
Chuck holders
Quick-action chuck insert for radial drilling machines partly with tools
Machine Handwheels
Coolant pump
movable tables with T-slots + digital display
Cutter heads
Clamping jaws for hacksaw
face plates various sizes
Jaw chuck div.
turning steels
Rotary ...
Warehouse stage 4,000 x 5,000 mm, capacity 500 kg / m ²
Included in the scope of delivery:
4 stand, on one side of 100 x 100 x 3 mm
2 main carriers C + 300 x 3 x 3,990 mm (perforated)
5 crossbar S + 300 x 2 x 4,800 mm (closed)
10 mounting brackets
2 cross associations
9 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature
incl. mounting material
including load signs
Dimensions, technical data
Steel construction: 4,000 x 5,000 mm
Floor area: approx. 20 sqm
Top height flooring: freely sel...
Bearing mounting and dismounting set, 17 pieces, Press set, Push set, Puller, Stroke set (AUTM-01615). 17-piece bearing mounting set for mounting bearings and retaining rings without damaging existing parts. This assembly set is made of a high quality aluminium magnesium silicon alloy and consists of 14 adapters and 3 pullers. For mounting and dismounting of bearings, bushings and old: With 14 adapters: 10-12mm, 14-16mm, 15-17mm, 16-18mm, 18-20mm, 20-22mm, 22-24mm, 25-27mm, 28-30mm, 30-34mm, 32-...
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.