Industrial trailer PA65-2 – 40 t payload

Multi-Trans PA65-2

Condition: like new (used), total length: 10,000 mm, total width: 3,000 mm, total height: 1,105 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved surfaces for internal plant transport. Tandem operation: The trailer components are not designed (without a coupling device) for tandem operation with multiple trailers. Payload: 60 t at 6 km/h with evenly distributed load (surface load) across the load area between the axles. Point or line loads are only permitted upon prior notification. Redsxrr Uhspfx Ahzobt Main frame: Robust welded construction made from profile steel. Loading area: Dimensions approx. 10,000 x 3,000 mm, loading height approx. 1,105 mm, loading surface covered with softwood planks, all-round recessed edge protection. Steering: All-wheel steering on 4 oscillating axles; drawbar can be raised, removed, or repositioned from front to rear; coupling height at the towing vehicle approx. 650 mm (other coupling heights only permitted upon prior notification); towing eye according to DIN 74054, 40 mm diameter; track rods with adjustable ball joint heads; diagonal or tie rods adjustable and mounted with low-maintenance pivot bearings; drawbar drop protection according to accident prevention regulations (UVV). Chassis: 4 steered oscillating axles, 2 steered axle lines for even load distribution on all wheels; wheels with solid rubber elastic tires approx. 559 x 406 mm; wheel hubs with tapered roller bearings and permanent grease lubrication. Paintwork: Top coat RAL 5002 ultramarine blue Rental or sale EU-wide.

Condition: like new (used), Year of construction: 2025, Portalkran 2x125 ton 30 Meter Hubhöhe Baujahr 2014 Redpfxsgmdnfe Ahzjbt

Condition: like new (used), total length: 6,000 mm, total width: 2,500 mm, total height: 1,012 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 60 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 6000 x 2500 mm, loading height approx. 1012 mm, loading area cover with softwood planks, all-round recessed edge protection Rbjdsuf Rw Tspfx Ahzjt Steering: All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 650 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV (accident prevention regulations) Chassis: 4 steered swing axles, 2 steered axle lines to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: - Optional: dual-circuit air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded brake cylinder, also acting on 4 wheels. - 2 lashing eyes or crane eyes made of round steel welded horizontally into the outer beams on both long sides, only use the crane eyes when the trailer is not loaded - Turning radius inside approx. 2100 mm - Outside turning radius approx. 5500 mm - Drawbar approx. 1500 mm long Rental or sale EU-wide.

Condition: used, mileage: 101,234 km, lifting height: 59,100 mm, Year of construction: 2017, operating hours: 1 h, General information Field of application: Construction Rjdovl Dl Aopfx Ahzjbt Serial number: Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 8.000 kg Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 16.85x2.75x3.99 Additional information Please contact PFEIFER GROUP for more information

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 2,980 h, load capacity: 3,000 kg, lifting height: 5,625 mm, free lift: 1,890 mm, fuel type: electric, mast type: triplex, construction height: 2,645 mm, fork length: 1,200 mm, empty load weight: 5,500 kg, total length: 2,500 mm, drive type: Elektro, construction width: 1,400 mm, Electric 4-wheel forklift Load center: 600 ISO class: ISO class 3 = 2,500 - 4,999 kg Rbjdpourz Scefx Ahzst Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Front tires Type: Non marking Front tires Size: 315/45-12 Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Size: 180/70-8 Rear tires Condition: 80 - 100% Battery Volt: 80V Battery Ah: 775Ah Battery type: PzS Battery year of construction: 2017 Battery condition: 80 - 100% Sideshift, 3rd valve, 4th valve, Rear working lights, Front working lights, Roof cover, Full free lift, Joystick,

Condition: new, 30000 kg length 6000 mm width 2500 mm height 823 mm lenkbar Rodpfx Ahsfrzvzozsbt lenkbar size of tyres 425 x 260 / 2-fach mm weight of the machine ca. 3,2 t dimensions of the machine ca. 7,9 x 2,5 x 0,823 mm Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar, Length 1320mm - impregnated wood support. Would you like other loads and dimensions? Please contact us.

Condition: used, machine/vehicle number: YV2RT60FXKA84xxxx, mileage: 5,874 km, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 20511 Specifications: 2021 model 7350 km (will go a little) 721 Engine hours 241 Crane hours Euro 6 engine 8x2 551 HP Suspension on 1st and 2nd axle: Steel Suspension on 3rd and 4th axle: air 2 x 110 liter variable pumps 2 x manual extensions for main boom and 2 x for jib Scanreco optical remote control (Top model) Weight cell main boom Additional function for main boom and jib Auto leveling (The car puts itself in a level position ready for lifting.) Virtual space (Possibility to limit all axes with a few keystrokes, no need to open a workshop for this. Brilliant when working under high voltage etc.) SKF central lubrication ring and up to the first link Extra function all the way up the jib Single winch hook (Jib / main boom) 2 shear winch hooks (Jib / main boom) 4-point winch hook (Main boom) Hook for jib Hook for main boom (Large hook) N d lower the generator (24 volts) Cable stop sensor and sleeve 4 ton winch Diagnostic cable for online help (Remote help) Danfoss valve center 2 x 2 ton counterweight (M is only used for cranes above the cabin, otherwise the counterweights are not needed, and these can be removed as needed) Front support leg   Structure: 4 x work lights strategically placed inside each outrigger cabinet. 50" LED bar work light at the rear of the cab Powerful LED lights in the crane. VBG mount, with air servo control unit mounted in rear cabinet left side. Roof rack 2 high beam LED bar on roof forward (daylight!!). Orange work warning LED beam on the roof. EasyUp foldable ladder with side railing. Boxes for chains, screws, etc. Mounted on the rear support legs so that they are extended together with the support legs and are also packed away while driving. Charger for control in cabin Plastic inner fenders axle 3 and 4. 3 edge pull-out cabinet between axles 3 and 4 On the left side between axles 2 and 3, a large cupboard with a 500 W fan heater is installed for hanging clothes to dry, etc. Flat / bottom rear closed with alloxed aluminum door panels that are cut to fit the car perfectly, with rounded edges for a very professional look. CNC manufactured plates up the back of the cabin. Fully painted sides, cabin and stern. Crane rest cradle for operation without jib. 5 pcs support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cribs at the back of the "plan" Right side large cabinet 1.2 x 1 meter Powerful LED reversing/rear work lights. The rear of the car was rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. Hatches strategically placed for access to relevant facilities under the building. Rbedowphixopfx Ahzet Precisely cut out panels in side...

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: AHL-50, tank capacity: 50,000 l, Storage tank to store liquid fertilizer (Ammonium Nitrate Urea solution) Redeb Hpd Rjpfx Ahzebt

Condition: used, New: Yes Rbodpfx Ajx I Elnshzot Please contact us for more information.

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, Drivetrain Drive: Wheel Rsdpfx Aswk Aw Hjhzobt Weights Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Identification Serial number: 82609 Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information