Used Automatic Tyre Changer Machine for sale (80,921)

Condition: good (used), Year of construction: 2007, machine/vehicle number: 609086, Offer 26074 Hydraulically-operated, double-column-guided horizontal band saw automatic machine Technical data: - Cutting capacity at 90° round: 260 mm - Cutting capacity flat: 260 x 260 mm - Maximum single stroke of material feed: 600 mm - Maximum cut length in multiple strokes: mm (not specified) - Saw band dimensions approx.: 4100 x 32 x 1.2 mm - Infinitely variable cutting speed: 12 - 100 m/min - Infinitely adjustable cutting pressure: 0 - 10 m/min - Hydraulic material clamping with adjustable clamping pressure - Coolant system - Chip conveyor - Total drive power: 400 V / 8.5 kW - Required space approx.: W 2350 x H max. 2340 x D 3050 mm Djdpfoyn Ikrox Ah Iekn - Weight approx.: 1900 kg - Infeed roller conveyor: 1500 mm

Condition: good (used), Year of construction: 1980, functionality: fully functional, Type VMS III - PV Machine No. 8518 Year of construction 1980 Technical data : 2-stage saw motor 2.0 / 2.6 kW Saw blade 350 mm 4 cutting speeds 8.5 / 17 / 34 / 68 rpm Clamping range, flat / round 200 / 120 mm Feed length, single stroke 5 - 600 mm Dedpfey Dcmbjx Ah Iokn Feed length, double stroke 1200 mm

Condition: used, Year of construction: 2004, 10 spindle system. Connected load: 380/400V/50Hz, 34 kW. Glass thickness: 3-60 mm. Dkodpfx Ahowynzco Ion

Condition: excellent (used), Otto Kremmling type oka Automata 600/7 Marzipan depositing and forming of soft mass. 25 kg blocks of Marzipan are put in squeezed through the roller and into the dies forms then goes into cooling system. Dksdpfxoylbz Se Ah Isn

Condition: good (used), Year of construction: 2020, functionality: fully functional, For sale: WMF 5000-S-Plus fully automatic coffee machine. The machine is sold with all accessories shown in the pictures. Viewing is possible at any time by prior appointment, even at short notice. Dsdpfx Aow S T Htoh Ijkn VAT can be stated separately!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Operating mode: Semi-automatic Machine type: Horizontal band saw Dkedpfx Ajyxcznoh Isn Cut: Miter cut Miter cutting range: -60° to +60° Drive power: 3 kW, 3 x 400 V/50 Hz Saw blade speed: 20–120 m/min Saw blade dimensions: 4780 x 34 x 1.1 mm Material loading height: 761 mm Minimum remnant length: 60 mm Sawing capacities: - 0 degrees = Round D350 mm, Rectangle 510 x 350 mm, Square 350 mm - 45 degrees R = Round D350 mm, Rectangle 400 x 100 mm, Square 340 mm - 45 degrees L = Round D350 mm, Rectangle 415 x 100 mm, Square 350 mm - 60 degrees R = Round D250 mm, Rectangle 260 x 100 mm, Square 240 mm - 60 degrees L = Round D270 mm, Rectangle 280 x 100 mm, Square 260 mm Dimensions L x W x H = 2570 x 1070 x 1500 mm Weight: 710 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, First installation in 2024 Operating mode: semi-automatic Machine type: horizontal band saw Cut: miter cut Miter cutting range: -60° to 60° (L/R) Drive power: 5.5 kW, 3 × 400 V/50 Hz Saw blade speed: 20–120 m/min Saw blade dimensions: 7900 × 54 × 1.6 mm Material loading height: 810 mm Shortest remnant length: 40 mm Smallest saw diameter: Ø 10 mm Sawing capacities: - 0 degrees = round D640 mm, rectangle 820 x 640 mm, square 640 mm - 45 degrees R = round D560 mm, rectangle 560 x 400 mm, square 540 mm - 45 degrees L = round 580 mm diameter, 580 x 560 mm rectangle, 560 mm square - 60-degree R = Round 380 mm diameter, 380 x 250 mm rectangle, 360 mm square - 60-degree L = Round 400 mm diameter, 400 x 530 mm rectangle, 400 mm square Dimensions (L x W x H): 3750 x 2400 x 2700 mm Dkodpfx Aeyxcu Ujh Ien Weight: 2500 kg

Condition: used, Year of construction: 1999, x-travel 500 mm y-travel 400 mm z-travel 400 mm control Heidenhain weight of the machine ca. 3200 kg Djdpsy Aa Nkjfx Ah Iekn

Condition: excellent (used), Opportunity! Previously owned by the German government, we are pleased to offer this top-quality liquid handling system, type "Genesis RSP 100/8," from the global brand TECAN, as a complete system with all accessories, from a single source. Dodpfxewltr Re Ah Ijkn The fully automated Genesis RSP 100/8 pipetting robot system is one of the most reliable systems available today and is an indispensable part of any laboratory. All components are in excellent condition; the system has never been used industrially and has seen very little use. All devices are in excellent optical and technical condition and show no significant damage – see pictures. The extensive range of accessories provides you with a complete system that you can start using immediately. Scope of delivery: - TECAN RSP 100/8 Liquid Handling System - Eppendorf Gradient PCR Mastercycler - Olympus DP10 Digital Microframe Camera for Droplet Size Monitoring - GeSim 1.2 Nanoplotter with Housing - Diluter 4 - NPC 8 Software - Gemini v4.2 Software - Cables, manual, power supplies, and small parts - Various pipette tips in various sizes (2 boxes containing approximately 10,000 pieces) Dimensions: (D) x (H) x (W): 78 x 94 x 106 cm Weight: approximately 145 kg Shipment will be made within three business days after receipt of payment by insured freight forwarder. You can also pick up the device from us during regular business hours. The total weight of the system, including accessories and two pallets, is approximately 250 kg! This sale is exclusively for businesses; you will, of course, receive a VAT invoice. Private buyers have the option of purchasing the device "on behalf of a customer"; direct commercial sales to private individuals are expressly excluded! The goods are sold excluding any warranty or liability for material defects. This exclusion does not apply to claims for damages resulting from grossly negligent or intentional breach of the seller's obligations, nor to any injury to life, limb, or health. Please feel free to contact us at the address provided for any inquiries regarding prices or technical details.

Year of construction: 2026, condition: new, Machine to close cans by flanging the lid onto the can. Semi-automatic version, the can is placed manually below the flanging unit. - Specifications: Can diameter: customized, can height: customized; max. speed of the machine in neutral: 20 cycles/min; power: 220, 0.55kW; machine dimensions: L400×W600×H1450mm; weight: 150kg. Dkjdpev Nk Thjfx Ah Ijn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: good (used), functionality: fully functional, AUTOMATIC DOVETAILING machine OMEC 750 for dovetail joints on drawers and different parts of furniture second hand machine working condition : good dovetail jointing machine with tool : YES Dkedpfx Ajgzrlpsh Ijn volt. 380/50

Condition: ready for operation (used), functionality: fully functional, RAPID Machinery Generation III automatic hot foil stamping machine, designed for industrial printing and packaging applications. The machine features two heated stamping heads, digital temperature control and continuously adjustable speed. Heavy-duty construction ensures stable and reliable production. Technical Specifications: Dsdpfxeyghr Hs Ah Iokn • Manufacturer: RAPID Machinery Co. (Sydney, Australia) • Machine type: Automatic hot foil stamping machine • Series: Generation III • Number of stamping heads: 2 heads • Head positioning: adjustable left / right • Maximum stamping width: approx. 300–350 mm • Maximum material thickness: approx. 0.1 – 1.5 mm • Processable materials: paper, cardboard, plastic substrates • Temperature range: approx. 80 – 200 °C • Temperature control: independent digital control per head • Operating speed: continuously adjustable • Operating modes: automatic / single pull • Counter system: digital batch counter • Drive system: electric • Power supply: 3-phase, 400 V, 50 Hz (typ.) • Safety equipment: emergency stop, CE-compliant safety system • Frame construction: heavy-duty industrial steel frame • Country of manufacture: Australia

Condition: used, Year of construction: 2014, operating hours: 10,100 h, functionality: fully functional, machine/vehicle number: 12410, total height: 2,900 mm, ram adjustment: 40 mm, total width: 1,550 mm, total length: 2,000 mm, table length: 580 mm, table width: 460 mm, pressing force: 25 t, control cabinet height: 1,800 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, overall weight: 4,700 kg, DGUV certified until: 01/2027, We offer a used punching machine of the type Mabu VS251/RC11 from the year 2014. The machine is in good used condition and ready for immediate use. Manufacturer: Mabu Model: VS251/RC11 Year of manufacture: 2014 Condition: used Dsdoyzl Txjpfx Ah Iskn Machine type: Punching machine Additionally, the machine is equipped with a high-quality roller feeder from Zehnder & Sommer (model EV12-22TK, year 2019), ensuring precise and reliable material feeding. If you have any questions or require further information, we are always happy to assist you. Please feel free to contact us by message or by phone. All information without guarantee. Subject to errors, changes, and prior sale.

Condition: repair required (used), Year of construction: 2005, functionality: not functional, Automatic stretch wrap machine for loads placed on pallets. Dsdpfjxfbfvex Ah Ijkn Machine requires repair! Missing one stretch film carriage, ASI communication not functioning, and control cabinet incomplete. Original machine documentation and electrical schematics included. Manufacturer: M.J. MAILLIS GROUP (SIAT) Model: MANCON 1710 Year of manufacture: 2005

Condition: ready for operation (used), Year of construction: 2021, operating hours: 3,370 h, functionality: fully functional, machine/vehicle number: 40 6003, spindle speed (max.): 12,000 rpm, spindle bore: 20 mm, bar passage: 20 mm, controller model: Fanuc 31i-B, Equipment: chip conveyor, Only 3,370 spindle hours! TECHNICAL DETAILS Spindle motor power: 5,500 W Max. spindle speed: 12,000 rpm Spindle bore: 20 mm Dkjdpfxsyzhlqo Ah Ijn Bar capacity: 20 mm MACHINE DETAILS Control: Fanuc 31i-B Number of axes: 9 Spindles: 2 Supply voltage: 400 V Dimensions & Weight Footprint: 2,000 x 1,280 mm Machine height: 1,720 mm Machine weight: 3,600 kg Operating hours Power-on hours: 32,700 h Spindle hours: 3,370 h EQUIPMENT Interfaces: Ethernet / RS232 / USB / PCMCIA Chip conveyor 3-color signal lamp Rotary cannon Workpiece picker Workpiece ejector Coolant tank Bar feeder: Iemca Elite 220 (2010) Fire protection system High-pressure unit 70 bar Muller Oil cooling unit Circuit diagram Maintenance documentation Operating manual

Year of construction: 1978, condition: used, machine/vehicle number: 1078136, Behringer full automatic sawing machine in a good working condition. Capacity round 320mm Dkjdpfx Asbta Dmoh Ion

Condition: used, Single-Column Eccentric Press RASTER ZEULENRODA Type PDA 100 Year of manufacture: 1995 Dkodpfxox U Eias Ah Isn Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height, max. stroke, ram Top Dead Center (TDC): max. 469 mm Installation height, max. stroke, ram Bottom Dead Center (BDC): max. 387 mm Strokes per minute: 50-200 s.p.m. Main drive motor power: 18.5 kW Power supply: 400 Volt, 50 Hz - Hydraulically actuated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with inching mode for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feeder MABU WE16, 160 x 3 mm, programmable feed length - Central grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Type WE16 Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roller diameter: 63 mm Strip speed: 40 m/min - Adjacent feeder control MABU Space requirements for eccentric press L x W x H: 270 x 240 x 350 cm Weight of the press: 13.5 tons

Condition: excellent (used), Numerical Control Type NC 500 (Software Tooling System) Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 8 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 4 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 72,2 Dkodpfxjyvrrqo Ah Ion The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (X axe) of the conveyor belts The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units

Condition: new, Year of construction: 2026, Highly efficient series production Clamp – enter the cutting dimension – start. Automatic saws with loading are a standard of rational series processing of bar and bundle material. Cutting area max. up to 290 x 320 mm. Furnishing Automatic hydraulic sawing machine with NC control for cutting from 0° to 60° right, complying with all CE safety standards The device has 9 programs, each of which composed of 99 individual steps, with a total number of approx. 890 cutting positions, with corresponding piece counter Function: material feed closing fixed vice Blade rotation, distribution of emulsifiable liquid, temple lowering until the end of the cut and return of the feed carriage until specified amount bail return and stop the blade rotation by cooling liquid distribution cycle repetition Hydraulic feed cut by cut with no length limit Numerical control of quantity and length of cut Hydraulic control center with cutting pressure adjustment The saw blade is tensioned electro-mechanically by means of Microswitch monitored. Device with brush for belt cleaning Bimetallic strip 3200 x 27 x 0.9 mm Section thickness 1.2 mm Material feed stroke 600 mm Motor hydraulic center 0.75 kW Electric pump 0.09 kW to cool the belt It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us. Dedpfx Ahofww Sqj Iekn

Condition: new, Year of construction: 2026, Kudu automatic drilling machine with NC control and manual tool change (3-axis) automatic drilling machine with a mobile processing unit - the table remains stationary, the drilling head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The system is programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,000 mm • Stable machine base • Drilling head speed: up to 2800 rpm • Tool holder: HSK 50 • Drive of the X, Y and Z axis via servomotors • Rapid traverse in the X Axis: 18 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance between the top edge of the table and the bottom edge of the tool holder 245 mm • Table width 450 mm • Working height: 1005 mm • Drilling diameter: 3 to 15 mm in St. 50 (depending on the tool) • Machining path in the Y-axis: 230 mm • Tolerance in the X-axis: +- 0.1 mm/m • Tolerance in the Y-axis: +- 0.05 mm • Tolerance in the Z-axis: +- 0, 05 mm • System weight: 2000 kg • System dimensions: 8000 mm x 2000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Simple programming of the machine • Cooling takes place by means of a minimum quantity spray system • Without material clamping vices • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming and operation It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us. Dkodpfx Aofu Iwmeh Ion

Condition: new, Year of construction: 2026, The drilling machine can be used both manually and fully automatically. After each drilling process, the system moves fully automatically in the X and Y axes to the next drilling position in the standard version. ADVANTAGES Djdjfu Swxopfx Ah Iskn Potential operator errors are drastically reduced. Programming takes just a few minutes. Significant reduction in manpower. product details Standard measuring lengths: 3,000mm 6,000mm Drill: Unimax 3 T AV (alternatively also with Unimax 4 Basic) Continuous drilling capacity in E 335 25 mm Normal drilling capacity 30 mm Thread cutting capacity M 20 Spindle MT 3 Automatic feeds (3T AV) 30 – 400 mm/rev Drilling depth 125 mm Column diameter 110 mm Weight 250kg Pole-changing motor 0.8/1.5 kW UNIMAX 3T/3T AV M00023/M00009 Spindle speeds infinitely variable Range A 80 – 1,400 rpm Range B 180 – 3,200 rpm motorized height adjustment, anti-twist device Optional: thread cutting device Fully automatic execution Automatic positioning of the X-axis Automatic positioning of the Y-axis Automatic drilling process Total length: 7,500mm Manual drilling is possible Coordinate table with motorized drive for the Y-axis via the control Travel of the Y-axis 200 mm Movable clamping table with motorized drive for the X-axis via the control X-axis travel: 3,000 mm Clamping table with groove for clamping the pneumatic clamping pieces and material support blocks. 2-axis control with memory control with 3,000 memory options Minimum quantity spray system with spray head and holder It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, UNIBOHRFIX 100 H Fully automatic drilling machine, measuring length 6000mm Item No. 6020 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X values ​​and calling up a program that has already been written, the machine works completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 1-axis control Pneumatic vice (span 200 mm) Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV (for technical data see data sheet) anti-rotation device motorized height adjustment tapping device NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile to protect against dirt Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / mounting bracket / roller width 407 mm / insert plates / struts / roller diameter 50 mm / steel rollers Dkodpfx Ahofu Itbj Ijn

Condition: good (used), Year of construction: 2012, saw blade diameter: 250 mm, feed length X-axis: 250 mm, total length: 1,400 mm, total width: 1,200 mm, total height: 2,400 mm, rotational speed (min.): 1,400 rpm, rotational speed (max.): 5,360 rpm, overall weight: 450 kg, Equipment: rotational speed infinitely variable, High precision circular cutting machine for für Aluminium +/- 0,02 mm, full automatic, YOP 2012, blade Ø 250 mm, capacity Ø 3-65 mm, motor 2,5 KW, stroke 250 mm, SIEMENS Simatic HMI, high speed gear 1400 - 5360 rpm, oil/air lubrication, spezial jaws 2-30 mm for single/double clamping, roller conveyor 3 m adjustable, LED lamp, warning light, 10 blades, manual Dksdpfx Aheyyl Hpe Ien

Condition: excellent (used), Alzmetall AC 25 pillar drilling machine, year of manufacture 1992. Very good condition, can be inspected under power. Dksdpfx Asx Sqv Hoh Ijn

Condition: used, Year of construction: 2011, Technical data: - VEN SPRAY PERFECT automatic spraying machine Dedpfjytuadox Ah Iokn - Year of manufacture: 2011 - Working width: 1,300 mm - Working height: 940 mm +-20 mm - Parts detection via light curtain - CNC 7000 control system - Right-hand side operation - Z16 dual gun drive - Water-sprinkled extraction system - Extraction system in stainless steel design - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - Paint recovery system via V-band - Feed speed continuously adjustable 3 - 9 m/min - Installed spray circuits 2 pcs. - Gun arm quick-change system, 2 pcs. - Number of installed spray devices 4+4 pcs. - Number of material pumps 2 pcs. - Supply air filter ceiling G5 - Length ~ 6,590 mm - Width 3,666 mm (+1,152 mm) - Height 2,500 mm - Total connection 22 KW - Volts, Hz 400 / 50 - Colour RAL 7035 - Location, in stock from Voltage fluctuations max. +/- 5 % The photos show the spray machines before the overhaul. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!