Used Gubisch for sale (14)

Condition: good (used), For sale is a four-sided planer by Gubisch. Technically flawless, cosmetically in good used condition. Machine specifications: Maximum dimensions: 180mm x 120mm Chedsx Dm S Sspfx Ab Tsf Minimum dimension: 18mm x 6mm Max. material removal: 10mm Operating pressure: 6 bar

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Crosscut circular saw with 2 double shafts – vertical and horizontal configuration. Designed for sawing battens, strips, slats, and separation cuts with minimal kerf width. Cedpfx Abjx Ap Dzs Tjhf Maximum cutting height: 200 mm. Maximum cutting width: 200 mm. Clamping bushings: 150 / 160 mm. Horizontal saws: 2 x 22 kW. Vertical saws: 2 x 30 kW. Feed speed frequency-controlled from 0 to 40 m/min. 8 pairs of powered feed rollers. Pneumatically adjustable roller pressure. Electric height adjustment. Electric width adjustment. Electrical control cabinet with operating system. Saw bushings and tools included. Sound-insulated cabin. The machine is in very well-maintained condition and was only used occasionally. There is no visible wear on the feed rollers. The unit has not been in operation for 12 years. Mechanization: - Infeed centering roller conveyor with adjustable feed gearbox. - Outfeed roller conveyor with integrated cross drag conveyor. - Both with adjustable feed gearbox. Mechanization system is from an older generation. - Electrical control cabinet with operating system. Gubisch Grimme Multi-blade Saw Cross-cut multi-rip saw Lamella multi-blade saw Cross-cut circular saw with two double shafts, vertical and horizontal execution. Suitable for cutting battens, strips, slats, and for separation cuts with a narrow kerf. Max. cutting height: 200 mm. Max. cutting width: 200 mm. Clamping sleeves 150 / 160 mm. Horizontal saws: 2 x 22 kW. Vertical saws: 2 x 30 kW. Feed frequency controlled 0 – 40 m/min. 8 driven roller pairs. Pneumatically adjustable roller pressure. Electric height and width adjustment. Electrical control cabinet with controls. Saw bushings and tools. Sound-proofed operator cabin. The machine is in excellent condition and was only sporadically used. No visible wear on the infeed rollers. Not in use for the past 12 years. Mechanization: Infeed centering roller conveyor with adjustable feed gearbox. Outfeed roller conveyor with integrated transverse discharge conveyor. Both with adjustable feed gearbox. Mechanization is of an older type. Electrical cabinet with control system.

Condition: used, Year of construction: 1996, BMH four side moulder With all in- and outfeed conveyors - Year: 1996 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 95777 - Voltage [V]: 380 - Power [kW]: 48.0 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Cedpfx Abswniqbs Tshf Yorick Diebels

Condition: used, Year of construction: 1998, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 GUBISCH – CENTROMAT CW 2 will be sold on behalf of our customer, ex location ----- Manufacturer description: ----- For window and door production, with 50 mm spindle diameter in longitudinal profiling. With the following processing stations and options: - Slotting machine on one side for straight and angled connections Milling machine for longitudinal profiling - Rebating operation with synchronous milling unit and automatic plunge. Pivoting frame support up to 650 mm - Central control 1.0 cross-cut saw automatically plunges from above ----- Motor power, including motor brake: 3.0 kW Spindle speed: 2,800 rpm. Cutting circle diameter: 350 mm diameter Spindle diameter: 30 mm diameter Clamping flange, 1 driver 6 mm diameter TK 42, 120 mm diameter Cjdpfsw I Eawjx Ab Tehf Pneumatic vertical stroke: 100 mm Pneumatic horizontal stroke: 160 mm against 2 manually adjustable 6-way turret stops Chip extraction hood with extraction nozzle 100 mm diameter 2.0 slot unit ----- Motor power, including motor brake: 9.2 kW Spindle speed: 3,800 rpm Flight circle diameter: 320 mm diameter Spindle diameter: 50 mm diameter Usable spindle length: 320 mm Pneumatic vertical stroke fixed: 2 x 100 mm Suitable for 3 tool sets of 100 mm each Zero height: 10 mm Chip extraction hood with extraction nozzle: 160 mm diameter 3.0 Slotting table ----- Table height above floor 920 mm Feed for 4 speeds freely adjustable: - 1. Milling, slanting window and typing speed can be set in the table (approx. 7 m/min.) - 2. Sawing speed approx. 7 m/min. (can be set on the device) - 3. Transfer speed approx. 10 m/min. (can be set on the device) - 4. Return speed/without processing approx. 25 m/min. (can be set on the device) - Motor power, including motor brake 0.37 kW Workpiece clamping pneumatic Pendulum pressure shoes Workpiece clamping pneumatic 1 clamping cylinder with 2 additional pressure shoes 3.1 Counter wood device Counter wood changer with 2-way automatic change and then with manual. Rotation of 180 degrees, 2 further counters possible, which then also counter in automatic mode 3.2 Length stop ----- - Stop system with 3 scales for - a) outside frame - b) outside sash upright - c) outside sash crosswise Adjustment manually - Length with attachable extension 3000 mm - for sloped windows, pivotable +/- 60 degrees 3.3 Angle transfer - automatic via vertically clocked feed roller in the milling feed 4.0 Milling machine For longitudinal profiling and rebating of windows/doors with the following units: ----- 4.1 First profile milling unit ----- - Counter-rotation - Synchronous rotation with automatic plunge can be used for rebating - Motor power including motor brake: 9.2 kW - Spindle speed: 6000 rpm. - Cutting circle diameter: 240 mm max. - Spindles adjustable for zero diameter 140 mm max. - of tools 112 mm min. - Zero height: 10 mm - Spindle diameter: 50 mm diameter - Spindle usable length: 320 mm - Vertical stroke pneumatically fixed, - suitable for 4 tool sets of 80 mm each, 3 x 80 mm - Horizontal stroke pneumatic: 80 mm - Chip e...

Condition: used, Milling unit GUBISCH spindle diameter 40 mm Tool clamping length 240 mm Chodpfoq E Iu Djx Ab Tjf Tool spindle total length 300 mm >> very good and stable design made of steel

Condition: good (used), Year of construction: 2001, functionality: fully functional, GUBISCH Centromat CW3 Used machine for window and door production with 50 mm Ø spindles in longitudinal profiling The following parts have already been replaced: Energy chain and electrical wiring to the slot table; Sound insulation mats in the covers; Pneumatic hoses; Bearing for counter disk; Gluing side in the longitudinal area; Rotary encoder for second slot spindle; Bearing for slot table; PC has been cleaned and checked; Various pneumatic cylinders; V-belt. Chjdpfx Aboxgqluo Tjf

Condition: used, Year of construction: 1977, Gubisch planer Type: 172/2 Year of manufacture: 1977 Planing width: 170 mm Planing height: 120 mm Spindle diameter: 40 mm Spindle positions: Bottom 4 kW Right 4 kW Left 5.5 kW Right 5.5 kW Cedpfx Absxfzlpo Tohf Top 7.5 kW Top/Bottom 7.5 kW

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, working width: 220 mm, planing width: 140 mm, overall weight: 2,700 kg, planer shaft diameter: 40 mm, Equipment: motor brake, a four-sided planer with five planing spindles, the last spindle is a uni-spindle (tiltable) Codpfx Abjt Srwpe Tshf Spindle bottom 5,5kW, left/right 4kW each, left spindle electrically adjustable, top 5,5kW, Uni 4kW

Condition: used, Year of construction: 1999, functionality: unexamined, planing height: 100 mm, planing width: 180 mm, overall weight: 850 kg, 4 shafts Horizontal bottom 4 kW Vertical right 3 kW Vertical left 3 kW Horizontal top 4 kW 2 feed speeds 6 + 12 m/min. Cjdpfx Abjwrdruj Tjhf

Condition: excellent (used), Year of construction: 1995, operating hours: 1,234 h, functionality: fully functional, 1 GUBISCH - window production line type CENTROMAT-CD-SUPER (output 3 - 4 parts per minute. Number of units to be produced in 8 hours, approx: 200 pieces) with the following machine components: 2 cross-cut saws > 2 cross-cut saws electronically controlled: yes > Number of tools: 1 piece > Spindle speed: 3000 rpm > Tool diameter max.: 350 mm > Motor power: 3 kW 2 left and 2 right vertical slot spindles > Number of tools: 3 pieces Codpfjv A It Sjx Ab Tjhf > Spindle stroke: 3x100 mm > Spindle speed: 4200 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Tool diameter max.: 320 mm > Motor power: 11 kW 3 profiling spindles vertical right > Number of tools: 3 pieces > Vertical spindle stroke: 3x100 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Max. tool diameter: 230 mm > Motor power: 9.2 kW 3 Profiling spindle vertical left > Number of tools: 3 pcs. > Vertical spindle stroke: 3x100 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool clamping length: 300 mm > Max. tool diameter: 230 mm > Motor power: 9.2 kW Other features: > Online capable: yes > Double parts package: yes > Screen control: yes Detailed description on request.

Year of construction: 1980, condition: good (used), Gubisch planer and moulder 172/7 S/N 3425 80 Year of manufacture 1980 length of the planing table 1950 mm planing width maximum 170 mm planing height maximum 120 mm Spindle diameter 40 mm 7 planing shafts : 1.bottom planing shaft 7,5 kW 2.right joining shaft 3,0 kW 3.left shaft 4,0 kW 4.right shaft 4,0 kW 5.Top Thickness Shaft 4.0 kW 6.Top Thickness Shaft 5.5 kW 6.Uni shaft top / bottom 3,0 kW Voltage 380 V, 50 Hz Power consumption 33.6 Kw Feed motor 1,5 kW Feed speed infinitely variable 5 - 30 m/min. Codpfx Ajgrmymjb Tehf weight 3300 kg Dimensions ( L X W x H )4800 mm x 1400 mm x 1850 mm technical data under reserve

Year of construction: 1971, condition: used, Type G617 Working width 170 mm Working height 110 mm Infeed table length 1600 mm 7 spindles B, R, T, L, R, T, B Spindle diameters 40 mm Feeding speed 30 m/min Made in Germany 1971 y. Cjdpsh U R T Sefx Ab Tohf Transport dimensions 4900x1100x1500mm Weight 3100 kg Price 2400 Eur (EXW Jonava, Lithuania)

Condition: ready for operation (used), Year of construction: 1988, 4-side planer Brand: Gubisch Type: BS 170/3 Machine no.: 6538 Year: 1988 includes 4 cutter blocks 6 working spindles, the last universal Brake in motors Cardan drive Variable feed speed Pneumatic pressure TECHNICAL DATA Capacity max. wood dimension 180x120mm Spindles 6 pcs Spindle configur: Below 4kw, right 3kw, left 5.5kw, right 5.5kw, above 7.5kw, universal 7.5kw Spindle diameter 40mm Spindle speed 6000v/min Feed wheel 140x50mm Feed motor 1.5kw Chodpfx Abjwntm Te Tef Motor for height adjustment 0.75kw Feed speed 0-30m/min Compressed air 6 bar, 150Nl/min Extraction nozzles 140mm in diam, air speed 25-30m/sec Power: 400 volts, 50Hz, 3 phase, 36kw, 78 AMP Dimension: 4800x1600x1500mm Weight 3800 kg Stock no.: 2002527

Year of construction: 1996, condition: reconditioned (used), machine/vehicle number: 16319, max. machining dimensions 220 x 120 mm (raw wood dimension max. 230 x 130 mm) min. machining dimensions 15 x 6 mm, automatic positioning "Hecht-Posiomat", feed rate 6 - 22 m/min, feed roller pressure 6 bar, spindle diameter D = 40 mm, max. chip removal 10 mm feed table 2.000 mm, feed motor 2,2 kW, height adjustment 0,37 kW, dressing spindle 4 kW, joining spindle 4 kW, left profile spindle 4 kW, thickness spindle 5,5 kW, glazing bead separation, ex location Seevetal, in "as is" condition as viewed, subject to prior sale, Chjdpfxeh Euvmo Ab Tef without freight and packing