Used Automatic Delivery for sale (35,150)

Condition: used, disk of circular saw-Ø: bis 250 mm cutting area at 90° round: ca. 7 5 mm cutting length: 500 mm electrical connection: 380 V sawing drive: 0,75/1,1 kW space needed: 1700/2100 x 900 x 1440 mm Rbsdebbbhnjpfx Ab Isw weight: 355 kg

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm Rsdpfxsz N Amj Ab Iebw weight: ca. 1800 kg

Year of construction: 1986, condition: good (used), machine/vehicle number: 120 603, cutting area round: 250 mm cutting area square: 250 mm sawing band measures: 3660 x 25 x 0,9 mm Rbsdpfx Abef S Ilye Isw band speed: 20 - 70 m/min sawing drive: 1 kW space needed: 1900 x 1450 x 1250 mm weight: ca. 850 kg

Year of construction: 1970, condition: good (used), machine/vehicle number: 1258, disk of circular saw-Ø: 315 mm cutting area at 90° round: 90 mm cutting area at 90° square: 80 x 80 mm cutting speeds: 12,5 - 25 m/min forward feed speeds: hydropneumat. stufenl. regelbar cutting length: 5 - 1580 mm saw drive: 380 V, 1,8/2,5 kW space needed: 2300 x 1000 x 2800 mm weight: 940 kg Rbedoh I Dvnopfx Ab Isw

Condition: good (used), functionality: fully functional, Automatic stacking unit for destacking battens, boards or long goods in kiln trucks. Manufacturer Makor, type ACA 2. Equipped with 2 transfer arms. Part lengths approx. 1600 - 3000 mm (depending on part thickness), maximum part width approx. 170 mm. Installation length approx. 3000 mm. Weight approx. 1500 kg. Redsyxyfkspfx Ab Iobw

Condition: good (used), Renz ABL-500 Automatic Spiral Binding Machine A powerful machine for the production of calendars, notebooks, and other metal spiral-bound products. The machine automatically feeds the spiral, cuts the spiral into pre-defined lengths, inserts the hanger, and clamps the binding. Max. feeder size: 500 x 700mm Min. feeder size: 70 x 135mm Max. thickness: 15mm Table with folded sheet feeder Automatic hanger loading and mounting Automatic wire pick-up from the roll with wire spacer removal Closing module Delivery Central controller for the entire machine Capacity up to 2500 cycles/h Redpfoywdugjx Ab Isbw 380V power supply + compressed air The machine has a central lubrication system. Weighs 1300kg Includes many additional components, tools, and documentation.

Condition: good (used), Original Heidelberg GT 34×46 Automatic Die Cutter This machine can cut, creas, perforate, and even print (optional). Excellent condition, recently serviced. 100% original, no modifications. Machine format: 34x46cm Pressure: 60t Weight: 600gsm Working speed: 4000 sheets/h Weight: 2300kg Rjdpeywdr Sofx Ab Isbw Fully complete, includes frame and spare parts, but no print rollers. A very rare machine on the market.

Condition: good (used), Renz Autobind AB 700 + KAS 500 Semi-Automatic Spiral Binding Machine Machine in very good condition, ready to operate. Efficient semi-automatic machine for the production of calendars, notebooks, and other metal spiral-bound products. Fast operation Spin diameters range from 3/16″ to 1 1/8″ Redoywdrfopfx Ab Isbw Working width up to 700 mm Crimping thickness approx. 23 mm Capacity up to 1200 cycles/hour The semi-automatic machine unwinds the spiral from the spool, counts the stitches, cuts the spiral to the pre-set stitch count, and transfers the spiral section to the crimping area. The operator places the pre-perforated calendar on the table. The calendar is automatically transferred to the crimping area by pressing the pedal. Includes a KAS 500 hanger feeder Power supply: 230V + compressed air Weight: 615 kg.

Condition: good (used), Bacciottini Pit Stop AFSpeed ​​Automatic Creaser The device is fully operational and ready to use. It is the most efficient creasing and perforating system on the market, with a robust design. Made in Italy. Non-stop vacuum feeding with the ability to add material during operation. Two independent compressors (suction and airflow). The set includes creasing and perforating tools. Technical data: Maximum sheet size: 500 x 700 mm Min. sheet size: 100 x 150 mm Maximum speed (for A4 format): 8000 sheets/h Material weight: 80-600 GSM Rbjdpfeywdqujx Ab Iew Maximum number of creases per sheet: 100 Gap distance: 0.1 mm Setting accuracy: 0.1 mm Power supply: 400 V Power consumption: 3.5 kW Weight: 200 kg Dimensions: 1600 x 800 x 1200 mm

Condition: good (used), GUK K50/4/1/FL 2-50 Automatic Folding Machine Machine in perfect condition, ready for production. Format: 500x700mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes electronically adjusted via computer 1 cross-cut knife First cassette extended. Continuous speed control via inverter control panel Rbedpfxoywdqho Ab Ijw Counter with batching function and folding speed indicator. Rietschle compressor. Raised soundproofing hood. Tool roller for mounting tools such as perforation, creasing, and cutting. FL2-50 feeder with vacuum unit Window cassette with control unit. Mobile delivery with continuous speed control.

Condition: good (used), Morgana DocuFold Pro Automatic Folding Machine The machine is in very good condition and ready for operation. Two folding cassettes, adjustable from the control panel. The folding machine is ideal for digital prints thanks to its dedicated rollers. The counter features batch and total counting. Rbsdpfxeywdp De Ab Iew Double-feed sensor. The machine is very easy to set up, even for those unfamiliar with folding. Technical specifications: Maximum format: 674mm x 365mm Maximum speed: 27,000 sheets/h Basic weight: 45-240 g/m² Power supply: 230V Weight: 132kg The machine includes a creasing and perforation attachment. The machine is mounted on wheels for easy movement.

Condition: good (used), Kolbus ECK 100 Automatic Corner Cutter Made in Germany, Kolbus GmbH & Co. KG. Very good condition. This is a professional, production-grade device for trimming corners for hardcover binding. Year of manufacture: 2009. Sturdy construction ensures precise operation. Interchangeable blades. Adjustable margins. One set of blades included. Rjdsywdpdopfx Ab Iobw Compressed air powered.

Condition: good (used), Rilecart R-500 Semi-Automatic Spiral Binding Machine Efficient semi-automatic machine for producing calendars, notebooks, and other metal spiral-bound products. The machine automatically feeds the spiral, cuts the spiral into pre-defined sections, inserts the hanger, and clamps the binding. Maximum binding width: 500 mm; minimum: 50 mm Automatic hanger loading and installation Capacity: up to 1500 cycles/h Power supply: 230V + compressed air Made in Italy. Rbodpsywdntsfx Ab Iew Weight: 450 kg

Condition: good (used), Renz Autopunch AP 360 V4 Automatic Perforator This machine is in very good condition. It comes from a government institution. Includes a 4x4mm perforation tool with a cutout for the hanger. This two-module tool is designed for continuous operation and heavy loads. The unique „Two-finger” system ensures perfect reception of sheets of varying weights. After perforation, the sheets rotate around a special drum, maintaining the correct page sequence at the receiving station. Two-piece perforation strips can be used, allowing for the perforation of both books and calendars. Perforation up to 2.4mm in a single cycle. Quick and easy replacement of perforation strips. Perforation strips can be used with or without a cutout for the hanger. Quick format change by switching off selected needles without having to remove the bar. 230V power supply Rodpfx Asywdngjb Isbw Weight 720kg Made in Germany.

Condition: used, capacity 90 degrees: round 260 mm Rbedpfxeyukhmo Ab Ijw capacity 90 degrees: square 260 mm capacity 90 degrees: flat 300 x 260 mm dimensions of saw-band 4200 x 34 x 1,1 mm sawing motor 4 kW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 - ERF23 - BGR Rbjdpfx Asxwp Nyjb Iew - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2015, saw blade diameter 350 mm Cutting capacity 90° (rectangle) 100 x 90 mm Cutting capacity 90° (square) 90 x 90 mm Cutting capacity 90° (round) Ø 95 mm Cutting capacity 45° (rectangle) 75 x 80 mm Cutting capacity 45° (square) 75 x 75 mm Cutting capacity 45° (round) Ø 90 mm spindle turning speed range 38/19 U/min power capacity 1,5 / 0,75 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved. Rbodpfx Abeygx Dyo Ijw

Condition: excellent (used), mileage: 202,967 km, power: 92 kW (125.09 HP), first registration: 03/2017, fuel type: diesel, tire size: 205/65R16, axle configuration: 4x2, wheelbase: 3,500 mm, fuel: diesel, CO₂ emissions: 159 g/km, fuel tank capacity: 80 l, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 5,500 mm, total width: 1,960 mm, total height: 1,900 mm, Year of construction: 2017, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, power mirror, sliding door, traction control, General information Cab: single Registration number: V-925-HK Technical information Number of cylinders: 4 Engine capacity: 1.598 cc Axle configuration Tyre size: 205/65R16 Brakes: disc brakes Front axle: Max. axle load: 1585 kg; Steering; Tyre profile left: 70%; Tyre profile right: 70% Rbjdpoyxxdxjfx Ab Iow Rear axle: Max. axle load: 1650 kg; Tyre profile left: 80%; Tyre profile right: 80% Weights Empty weight: 1.735 kg Carrying capacity: 1.305 kg GVW: 3.040 kg Max. towing weight: 2.000 kg (unbraked 750 kg) Consumption Average fuel consumption: 6 l/100km (47 MPG) Maintenance APK (MOT): tested until 07/2026 Condition Technical condition: very good Visual appearance: good Damages: none = Additional options and accessories = - Metallic paint - Multifunctional Steering Wheel - Radio/Cd/Audio system - Roof rack - Side Door Right = Remarks = VIDEO: Renault Trafic 1.6 DCI 125 hp Euro 6Y L2H1 Extended version 202,000 km NAP Air conditioning / Electric package / Navigation Roof rack / Lined cargo area

Condition: used, Year of construction: 2013, functionality: fully functional, overall weight: 2,190 kg, input voltage: 380 V, type of input current: three-phase, spindle speed (min.): 2,500 rpm, spindle speed (max.): 3,600 rpm, rotational speed (max.): 3,600 rpm, rotational speed (min.): 2,500 rpm, input frequency: 50 Hz, We offer this used Locatelli ARIETE 3 automatic wood lathe, year of manufacture 2013. Rbsdpjyxw D Defx Ab Iew Machine type: ARIETE 3 Year of manufacture: 2013 Serial number: CA 2725 Voltage: 380 V Frequency: 50 Hz Number of phases: 3 Delivery date: 10.10.2013 Weight: 2190 kg Automatic lathe Locatelli Ariete 3 Maximum/minimum prism length: 1000/200 mm Maximum/minimum prism dimensions: 85×85/20×20 mm Maximum workpiece length: 120 mm with hole, 150 mm without hole Automatic material feeder Main motor with 3/4 kW output Two spindle speeds: 2500/3600 rpm Oil pump motor: 2.2 kW Operating pressure: 6–8 bar Comes with many accessories. Units: roughing, finishing, drilling unit, parting knife You are welcome to see the machine in operation at any time. More information available by phone. If you have any questions or require further information, please feel free to send us a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 43,436 h, functionality: fully functional, machine/vehicle number: 0298 (029), turning length: 205 mm, spindle speed (max.): 10,000 rpm, type of input current: AC, total width: 2,785 mm, total length: 2,810 mm, total height: 4,578 mm, bar diameter (max.): 20 mm, input voltage: 400 V, empty load weight: 4,121 kg, DGUV certified until: 01/2026, load capacity per storage section: 250 kg, Equipment: documentation/manual, We are selling our 9-axis CNC Swiss-type automatic lathe! The machines are in good condition, well-maintained, and fully operational. Control model: Fanuc 16i-T Number of axes: 9 Axes: X / C1 / Y / E / B / A / X / C2 Max. bar diameter: 20 mm Max. turning length: 205 mm Max. main spindle speed: 10,000 rpm Max. counter spindle speed: 10,000 rpm 3 cross drilling units, 5,700 rpm MACHINE DETAILS: - Control: Fanuc 16i-T - Coolant: Oil - Tank capacity: 170 L - Operating hours: 43,436 Rbodpfxsyxv Uuo Ab Iew EQUIPMENT: - 5-position tool holder - 3 cross drilling units - Turret with 8 stations - Various additional tool holders - Parts conveyor belt - FMB Turbo 3-26 /3200/B bar feeder - Chip conveyor Can be collected at any time in Königsbach-Stein, Baden-Württemberg.

Condition: used, machine/vehicle number: 008396, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 95 mm Rbodpfx Abeygtaco Ijw No of Grippers: 9

Condition: used, machine/vehicle number: 008392, Max. panel width: 4500 mm Rbodpfx Abex Swb No Isw Max. panel length: 2200 mm Main saw blade projection: 127 mm No of Grippers: 9 Panel Rotation Station: yes Thin sheet loading: yes Vacuum sheet loading: yes

Condition: used, machine/vehicle number: 005255, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 110 mm Rbodpjg E Tcxjfx Ab Iew No of Grippers: 7

Condition: used, machine/vehicle number: 008021, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 125 mm No of Grippers: 11 Panel Rotation Station: yes Thin sheet loading: yes Rbodpfx Aew Uz Spob Isw Vacuum sheet loading: yes

Condition: used, machine/vehicle number: 006645, Max. panel width: 5600 mm Max. panel length: 2850 mm Rbedpfx Absv Ir Sce Iow Main saw blade projection: 125 mm No of Grippers: 11