Used Manual Crimping Machine for sale (72,174)

Year of construction: 1978, condition: ready for operation (used), A two-station crimping and blocking machine Theo Leibrock is available. Stations: 2, processed materials: leather/leather composites/upper materials/thin plastics, machine dimensions X/Y/Z: approx. 1000mm/1000mm/1750mm, weight: approx. 400kg. Documentation available. On-site inspection is possible. Nwjdpfx Aeydp Anjh Hob

Condition: new, Year of construction: 2025, New machine immediately available Capacity: 1520 x 2.25 mm segment-split upper cheek rail -tool rest -Adjustment of the upper beam by hand lever left/right Njdpfx Ahoh S Uirs Hewb

Condition: new, Year of construction: 2025, Capacity 1020 x 2,5 mm (ST37) Delivery of the upper beam by feet clamping High segments in the upper beam Bending and lower beam are segmented too RAL 7016 paint Manufacturing EU Nwodsfifbbjpfx Ah Hsb immediately available ex works Freight costs on request

Condition: new, Year of construction: 2025, Capacity 2020 x 2 mm (ST37) Delivery of the upper beam by hand lever left + right Slanted segments in the upper beam Continuous bending and lower beam rails RAL 7016 paint Manufacturing EU immediately available ex works Freight costs on request Nwedpfx Ahofifa Ao Heb

Condition: new, Year of construction: 2026, – Capacity 1.2 mm – Variable speed control – With 9 roller sets Nwsdpfx Ahsydhlze Hjb – Foot pedal operation – Brake motor – Emergency stop – Documentation – 400V

Condition: new, Year of construction: 2025, sheet thickness steel (max.): 4 mm, - Capacity 4 mm - Adjustment of the hydraulic roller - foot switch - Brake motor Nodpfx Ahjgg Nq He Hjwb - With 4 roller sets - Emergency stop - 400V

Condition: good (used), Year of construction: 2006, 2-component silicone system Swivel arm length: 2200 mm Njdpeycv Sgsfx Ah Howb Width: 1180 mm Depth: 1000 mm Height: 2450 mm with swivel arm removed Weight with barrel: approx. 450 kg Condition: good, second-hand

Condition: excellent (used), Year of construction: 2018, plate thickness 2.0 mm throat max. 400 mm Roller center distance min/max 100/120 mm piston stroke max. 20.0 mm turning speeds 3.0 - 15.0 U/min Nwodpfxsx U El Ue Ah Heb voltage 400 V total power requirement 2.95 kW weight of the machine ca. 385 kg range L-W-H 1200 x 800 x 1200 mm very good condition (almost like new) !!! Equipment: - heavy / robust electro-motorized beading machine - electro-motor drive - infinitely variable speed adjustment - internal gear brake motor - electro-hydraulic infeed of the top roller - 1x adjustable stop plate - 1x freely movable double foot switch - 2x set of beading/conveyor rollers - original operating instructions

Condition: good (used), Year of construction: 1980, weight of the machine ca. 160 kg No accessories Nedpfx Aoxy S Hysh Hswb For rolling beads

Condition: good (used), Year of construction: 2011, functionality: fully functional, Itaca corner press with retractable backstop Nedpfxoycip So Ah Hewb

Condition: ready for operation (used), Parker 80C080 Hose press press with hose jaws No. 241 Hose sizes: 1/4 " - 2" Power: 3 kW You are welcome to come by for a visit. You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. Visit our store and see our other offers. Indicated company names and trademarks are the property of their owners and serve only for identification and description of the products. Deviations from technical data as well as errors in the description of the article can happen and remain reserved. Nwedpolvrlkefx Ah Hjb

Condition: ready for operation (used), Parker 80 CE 082 Hose press Crimping machine with hose jaws Power: 1.5 kW Jaw sizes: 1/2" ; 3/8" ; 3/4" ; 1" ; 1/4" You are welcome to come by for a viewing. Nedpfxsu Hidkj Ah Howb We can also arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, Year of construction: 2014, PRESSTA 2000 – Corner crimping machine Key Technical Specifications (Pressta 2000) Manufacturer: Pressta-Eisele Type: Corner Crimping Machine (PV 8 model sometimes mentioned) Operation: Hydro-pneumatic Dimensions (W×H×D): 900 × 1,180 × 750 mm Weight: ~360 kg Operating Pressure: 8 bar Air Consumption: 40 l/stroke at 8 bar Pressing Force: 32 kN at 8 bar Press Stroke: 17 mm Return Stroke: 140 mm Max. Pressing Height: 150 mm Max. Profile Height: 210 mm Air Connection: R ¼'' Nedpfx Ahex R R Tio Howb

Condition: used, Year of construction: 2009, overall weight: 500 kg, compressed air connection: 7 bar, Pressing height 140 mm Nwsdpfx Ahjx R R Rns Hsb Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, input voltage: 400 V, overall weight: 590 kg, type of input current: three-phase, power: 5.4 kW (7.34 HP), Manual Lisec 2-k sealing machine TAL-50PS/B for Polysulfide. The machine is completely overhauled and therefore in excellent condition. As new. power: 3N/PE 400V 50Hz Nodpsyalq Tsfx Ah Hswb Load: 5,4kW The machine can be seen in our overhaul warehouse in Oroshaza/Hungary on appointment.

Year of construction: 2026, condition: new, Semi-manual operating Suitable for adhesive labels Nwjdpfefir Ucox Ah Hob Label width: 20-165 mm Label length: 20-200 mm Cylindrical bottle shape only 600 bottle or jars/hourú Dimensions: 530x420x300 mm

Condition: new, NEBES TM 210 BELT SAW - Single-phase 230V Cast iron structure Adjustable cutting angle from 0° to 60° All cast-iron frame with large rapid vice and handwheel for clamping the workpiece Electric pump for blade lubrication and cooling Blade tensioning system with disc springs and oil-bath blade tensioning gauge to ensure constant tensioning Two cutting speeds and induction motor 0.03 mm accuracy on h 100 of cutting Nwedei Ezq Dspfx Ah Hjb Cutting Capacity : 0° 45° 60° Ø 185 mm Ø 120 mm Ø 60 mm 180×180 mm 100×100 mm 60×60 mm 200×140 mm 100×100 mm 60×60 mm Weight : Kg 179

Condition: new, Good brand new Nwedpfefibfgsx Ah Hjb No. 1 available for immediate delivery! Warranty " CE " Made in Italy Cutting capacity : 0° = round tube mm 230 - square mm 220 - rectangle mm 170 x 300 45° = round tube mm 200 - square mm 180 - rectangle mm 180 x 230 60° = tubular round mm 130 - square mm 120 - rectangle mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Vice with rapid locking device Safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size Low voltage system 24 V 0.06 kW electric pump for belt cooling The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied in order to avoid belt yielding, increase its life, improve linearity and cutting time.

Condition: good (used), Schleuniger CS 9100 Cut & Strip Machine for cable processing: Nwjdpsx Sthljfx Ah Hjb Conductor cross-section: 0.0324 mm² to 6 mm² Wire length: 1 mm to 1000 meters Accuracy: Repeatability +/- 0.2% (resolution 0.14 mm). Stripping length: Partial stripping up to 30 mm, complete stripping up to 50 mm right and 30 mm left. Production rate: Up to 3,600 pieces/hour (100 mm length, 4 mm partial strip). Transport speed: 210–1400 mm/s. Blades & jaws: V-blades (standard), optional radius V-blades, diamond or knurled jaws. Interfaces: RS 232 serial port for PC communication Dimensions: 610 x 540 x 310 mm Weight: 42 kg #8450

Condition: new, Year of construction: 2026, HSBM 2020-20 SB - Manual swing bending machine HSBM SB - Manual swing bending machine in heavy design with segmented upper tools simple operation segmented upper tools swivel bending function with secure clamping of the workpiece by pretensioning of the upper beam Nsdpjcnxc Nofx Ah Howb heavy, compact welded construction for easy bending with exact adjustment of the bending angle by means of stop with scale particularly low-maintenance Segment division 25-30-35-40-45-75-100-150-200-200-270-400-400 Note on technical data: max. sheet thickness: performance data related to material with tensile strength 400N/mm²; bending capacity VA: factor 0,75; bending capacity Alu: factor 1,2; for bending VA hardened upper tools are required Model HSBM 2020-20 SB Article-No. 3772920 Technical data working width max. 2.020 mm bending capacity max. steel 400 N/qmm 2 mm Bending capacity max. steel 400 N/qmm without cheek widening Bending capacity max. steel 400 N/qmm w. cheek widening Bending capacity max. stainless steel 1,5 mm Bending capacity max. aluminium 2,4 mm Bending angle max. 135 Segment division Clearance between upper and lower cheek max. 120 mm length 2500 mm width 710 mm height 1500 mm Weight 1.020 kg Location: Ex works - free on truck -

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 431 Alüminyum Pvc Manuel Üstten Kesim Makinesi, • Complies with CE standards. Nwjdpfxeramzuo Ah Heb • The machine can cut at +45, -45, and intermediate angles. • Quick setting stops for 90, 75, 60, and 45 degrees. • Table locking lever for intermediate angles. • Profile clamping is pneumatic for practical use. • Diamond saw blade diameter is Ø400 mm. • Standard with measuring and material handling conveyors (2.5 meters on both left and right sides). • Cooling unit for cutting aluminum profiles. • Capability to work with a digital meter. OPTIONAL: • Roller conveyor system (3 meters on both left and right sides).

Year of construction: 2006, condition: excellent (used), Manual packing machine Nwedpfsiz S Ifjx Ah Heb

Condition: good (used), functionality: fully functional, Parker Parkrimp II 83 CE crimping machine for high-pressure hoses (hydraulic hoses) Crimping force: 125t (at max. 5,000 PSI) Suitable for the following fitting series: Nwsdpfx Ahov Rnnle Heb 43, 71, 77, 25, 26, 81, HY series (611HT, 801, 836) The following crimping dies are included: 5/16" Purple 80C B05 & A05 3/8" Yellow 80C A06 5/8" Orange 80C B10 & A10 1/4" Red 80C B04 & A04 3/4" Green 80C A12 & B12 & C12 & 12 (78) 1/2" Blue 80C A08 & B08 1" Black 80C A16 & B16 & C16 & 16 (78) 1 1/4" White 80C A20 (2 pcs) & C20 2" Red C24 Weight: 450 kg #8247

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, ❇️ RAPID HP205 – Profile Corner Joining Machine | Pneumatic | Industrial Quality For sale is a robust RAPID HP205 profile corner joining machine from a metal and window fabrication business. The machine is in very good, well-maintained, and fully operational condition and was used regularly until recently. Solid industrial quality "Made in Germany" – ideal for processing aluminum and metal profiles. Inspection and functional testing on-site possible at any time. ⸻ ❇️ Technical Specifications • Manufacturer: RAPID Maschinenbau, D-7404 Ofterdingen • Model: HP205 Nwedpfx Aox Rpc Njh Hsb • Year of manufacture: 1991 • Serial: 0209 • Machine No.: 5090 • Drive: pneumatic / hydraulic • Operation: foot pedal • Profile supports / extension tables on both sides • Clamping and pressing system for precise corner joints ⸻ ❇️ Condition & Equipment • Very robust machine construction • Precise clamping and pressing mechanism • Pneumatics with filter/maintenance unit • Including extension / support tables • Age-related, typical signs of use – technically flawless ⸻ ❇️ Terms & Conditions • Sale on behalf of customer • Machine is fully functional and maintained • Invoice with VAT shown possible • Delivery may be possible at cost • Location: 72229 Rohrdorf • Loading facility with overhead crane available on site ⸻ ❇️ Price €2,800 net plus VAT ⸻ ⚠️ I also offer additional machines and accessories for window, metal, and workshop operations in my other listings. ‼️ Please check out my other offers as well – it’s worth a look!

Condition: used, Measuring machine with manually operated measuring arm STIEFELMAYER high-precision measuring and scribing plate, cast steel/grey cast iron, heavily ribbed Machine no. 22890285 Year of manufacture 1985 Length 2500 mm Width 1500 mm Thickness 350 mm Plate thickness (top) 50 mm solid material with 300 mm ribs Working height approx. 800 mm Njdekdnwbopfx Ah Hjwb - with manually movable measuring arm, measuring range X = 1970 mm, Y = 815 mm, Z = 840 mm - with 3-axis digital display Grundig MZ 1030 - 5 height-adjustable feet Required space L x W x H 2500 x 1500 x 2500 mm Weight 3000 kg very good surface finish