Used Attachment Frame for sale (12,481)

Condition: used, tank capacity: 8,609 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Support ring made of Fe; manway diameter approx. 480 mm; internal tank with signs of corrosion (see photos); overall height incl. agitator gearbox (approx. 3400 mm without gearbox); Speed: 52 / 104 rpm Internal diameter: 2,000 mm Overall height: 4,950 mm Rjdpfjxqau Tsx Ahzjbt Heating/Cooling: present Max. allowable operating temperature: 220 °C Max. allowable operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Top head: Removable / hinged top head Agitator: Beam agitator Support type: Ring Location: Bremen Technical documents: Drawing Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,609 liters Volume double jacket: 313.0 liters Cylinder wall thickness: 8 mm Product-contacting material: Stainless steel V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 2,190 mm Previous use: Chemicals TANK Max. allowable operating temperature: 200 °C HEATING/COOLING JACKET Max. allowable negative operating pressure: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manway / dome: in top head Notes: Motor missing, manway cover missing Outlet: 100 mm MATERIAL SPECIFICATION Temperature control system material: Stainless steel V4A 1.4571 (AISI316) Flange material: Steel AGITATOR 1 Agitator manufacturer: Ekato TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Agitator equipment: Agitator type: Frame blade agitator; agitator motor missing but available from manufacturer; various agitator documentation available Top head wall thickness: 14 mm

Condition: used, Used machine Rbedpfowka Nmsx Ahzjt Used pneumatic frame press from Maweg MNo.: 7004124588 Pressing area: length approx. 3500 mm / height approx. 2450 mm 2 horizontal press cylinders 3 vertical press cylinders Availability: by arrangement Location: Röllbach

Condition: excellent (used), Year of construction: 1992, 4.5 kW motor Working height 245 cm Working width max. 365 cm Rbodpfxstq S H Aj Ahzot

Year of construction: 1994, condition: good (used), Rivo gang wheel sharpening machine Rbsdpspl D Hxjfx Ahzet Tyop GA 250

Year of construction: 2016, condition: excellent (used), machine/vehicle number: 216 105, BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails Rjdpehqmghsfx Ahzsbt and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

Condition: like new (used), Year of construction: 2016, General Electric ( GE) power plant with TOTAL power - 1.500 MW Rbedpfex N A Rdjx Ahzjt NEVER USED! NOTE - frequency is 50 Hz 2x 750MW Gas Based CCPP ( 4x gas turbines PLUS 2x steam turbines ) Please contact us for more details. Thank you!

Condition: used, Hydraulic frame press Schafberger & Sprödhuber with manual electrical adjustment. Technical specifications: on demand workpiece height: max. approx. 2,400 mm workpiece width: max. approx. 4,250 mm Control: Manually Rbodpfew I Dbmsx Ahzot

Condition: excellent (used), Line for door jambs (frames), with END-CUTTING, ROUTERING for COUNTER-PLATE and HINGE INSERTION (Anuba). Composed of: X10030A) Loading Conveyor X10030B) Transfer Conveyor X10030C) Double-end cutting and drilling machine "AMS" - Left-side Cutting 45° - Drilling - Cutting 90° - Right-side Cutting 45° - Drilling X10030D) Angular Conveyor (90°) X10030E) Anuba Inserting Machine "MASTERWOOD" Mod. MULTITEC Rsdpfsqwyclsx Ahzebt X10030F) Strike Plate Routering Machine "MASTERWOOD" Mod. Teknomat 3000

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beams Rjdpfx Ahsflc T Sezebt No. 2 Horizontal top supporting beams (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Horizontal metal arms with vacuum cups, adjustables OPTIONAL No. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader No. 1 Motorized rollers table (which receives panels from the Loader) Separate electric and command panel Electronic Programmer Perimetral safety metal grids Total installed motor power Kw 17,7 Working capacity (cycles/min) 16-20 (ca.) Min/Max panels thickness mm 10-50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3000 (ca.)

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°). Dimensions mm 7168 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Rbsdpfsd Rg Dzjx Ahzot Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 20.8

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3 Rsdpfsd Rg Dpsx Ahzsbt

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) Rbsdpfx Ahofi Tg Hozet No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Redewbp Nwepfx Ahzobt Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Gantry (Portal) machine, belonging to the line (SOFIT code: J10039) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms Rbjdpfx Ahsl Hycwszot N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 10 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Gantry (Portal) machine, belonging to the line (SOFIT code: JZ1030) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) Rbjdpol Hyfcefx Ahzot N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 10 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw

Condition: excellent (used), STACKER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on ground) to out-feed pile of panels from the Unloader/Stacker No. 1 Out-side motorized rollers table (which brings panels to the Unloader) Redpfxjt Ty A Ae Ahzjbt Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, total width: 1,800 mm, total length: 4,500 mm, total height: 3,500 mm, working height: 2,100 mm, working width: 3,000 mm, overall weight: 2,700 kg, input frequency: 50 Hz, height adjustment type: electric, power: 5.5 kW (7.48 HP), compressed air connection: 6 bar, type of input current: DC, Technical Description – Casolin Junior Frame Press The “Casolin Junior” frame press is a hydraulic vertical frame press designed for the efficient production of medium and large series of window and door frames. Manufactured by the Italian company Casolin G. & C. s.n.c., it is constructed for industrial manufacturing processes in woodworking and window production. Purpose of Application This machine is used for hydraulic pressing and assembly of window and door frames after pre-gluing or initial assembly. It ensures uniform pressure distribution and high pressing force to achieve precise frame geometry and a durable connection of components. Design and Function Redpjx Np Ebefx Ahzjbt The Casolin Junior is a vertical, free-standing hydraulic press. It consists of a robust steel frame with hydraulic vertical and horizontal cylinders that close and clamp the frame elements over defined pressing paths. The pressing force is generated by an electrohydraulic system that enables both vertical and horizontal pressure movements. Key Features: * Hydraulic Pressure: The machine operates with independently adjustable hydraulic cylinders for vertical and horizontal pressing movements to ensure stable and even force distribution on the frame. * Self-centering Horizontal Cylinders: These ensure that pressure is always applied centrally to the frame structure, increasing the quality and precision of the press joint. * Ergonomic Operation: Control panel with clearly arranged controls for simple handling and setting of pressing parameters; optionally, an optoelectronic measuring and control system can be integrated for automatic adjustment of pressing dimensions. * Usable working height (min–max): approx. 350 – 2,100 mm * Usable working width (min–max): approx. 250 – 3,000 mm * Vertical pressing force: approx. 900 – 9,000 kg * Horizontal pressing force per cylinder: approx. 280 – 2,800 kg * Horizontal cylinder stroke: approx. 100 mm * Hydraulic pump capacity: approx. 4 – 5.5 kW * Weight: approx. 2,700 kg * CE marking: machine complies with relevant CE standards. Dismantling and removal by the buyer, as soon as possible.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3600x800x1900 mm Weight 2400 kg Total power requirement 16 kw Rbjdjvz E Nujpfx Ahzjt

Condition: good (used), Year of construction: 1994, functionality: fully functional, working height: 220,080 mm, working width: 3,200 mm, overall weight: 2,500 kg, stroke length: 80 mm, height adjustment type: hydraulic, Hydraulic adjustment 3 vertical lifting cylinders, two horizontal lifting cylinders, really very good condition Rodpfet Rr H Iox Ahzobt

Year of construction: 1992, condition: good (used), Extraction system, make KELLER LUFT-TECHNIK Type: UNI-STAR X-SL, year of manufacture 1992 Motor 3.3 KW Max. air volume flow/h 2,300 Filter area 30 m2 8 cartridge filters are installed. Rbedpji E Td Hsfx Ahzet Dimensions 0.9mX1mX3.5m, weight approx. 1000 kg. Ready for use in good condition.

Condition: used, Working width 3500 mm Working height 2550 mm Number of cylinders 6 St. loading dimensions L x W x H 4500x950x2900 mm Hess Speedy frame press ----- will be checked Insertion dimension / pressing length max. 3,500 mm Insertion dimension / pressing height max. 2,550 mm Rbjdpfx Ahjxnqw Tozst Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 3 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V 3 pendulum pressure plates for studio windows 1 pendulum pressure plate for pointed windows 1 extension for pendulum pressure plate 1 small parts allowance Image and video not original, show identical model ----- (technical data according to the manufacturer - no guarantee!)

Condition: used, Support grinder for lathe FEIN Type: MB 2101 Rbedjx A Imhjpfx Ahzot Ident No.: 2287997 Grinding wheel diameter: max. 150 mm Grinding wheel width: max. 20 mm Mounting taper: Ø15.5 - Ø13 mm, length 21 mm Motor speed: 4400 rpm Motor power: 550 Watt Electrical connection: 380 Volt, 50 Hz - Grinding spindle drive via flat belt - 1 pc. grinding wheel mount Ø 32 mm - 1 pc. universal grinding wheel Ø 146 x 20 mm Support grinder weight: 19 kg In good condition

Condition: used, FEIN Support Grinder Serial No.: G 95304 Model MB 406 Max. grinding wheel diameter: 100 mm Max. grinding wheel width: 20 mm Grinding wheel mounting: Ø 20 mm Motor speed: 6,800 rpm Rbodox A Imbspfx Ahzst Motor power: 350 Watts Mains connection: 220 Volt, 50 Hz - Grinding spindle driven by flat belt - 1 universal grinding wheel Ø 98 x 20 mm included Weight: 11 kg Good condition

Condition: used, Technical data: 3 sections 6400 mm long Press sections can work together or individually Maximum dimensions of glued element: 4600x1180x200 mm in one section Hydraulic clamps 24 upper/vertical - 8 per section Movable vertical front clamps 24 - 8 per section Power supply: 400 V Motor power: 2.2 kW Overall dimensions: Redpfx Asx Id Dishzsbt Length: 19 200 mm Width: 1200 mm Height: 2300 mm

Year of construction: 2021, condition: excellent (used), Syspal 600HA2 Eurobin wash frame Rbodpfxonbdtie Ahzjt 2021, stainless, SWL 50Kgs, 3Ph