Used Grid Frame for sale (9,072)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, conveyor belt length: 3,400 mm, conveyor belt width: 400 mm, total length: 3,400 mm, total width: 500 mm, overall weight: 80 kg, power: 0.37 kW (0.50 HP), input frequency: 50 Hz, Equipment: type plate available, Aluminum frame conveyor belt 540x3400mm with new belt for sale Kljdpsyaquqjfx Ahvop Length: 3400 mm Belt width: 440 mm Full frame width: 540 mm Belt top plane (height): 1060mm geared electric motor 0.25kw 230/400v Belt speed: 4m/min Used conveyor belt, conveyor belt with new belt for sale from stock.

Condition: new, conveyor belt length: 22,000 mm, conveyor belt width: 3,750 mm, overall weight: 800 kg, The flat spiral belt with S-hook is a woven belts consisting of left and right spirals which are twined together by means of straight cross rods. The spirals are attached under post-tension, whereby a very dense belt surface is created. The cross rods at the end are bended in the direction of the previous cross rod. The cross rod is then bended around the previous cross rod. Weight 800kg Width 3.75m Diameter of chains 1.2mm The flat spiral belts with S-sides are practically familiar with a restricted amount of applications. This however doesn’t mean that the belt type can’t be used for other applications: Kledpfx Astp S E Eehvsp – Oven belts in bread & pastry in industry – A special version of the above mentioned is with duplex chains at the sides – Belts in tunnels serving high temperature treatment processes such as tempering, harden, sintering, hard soldering, etc.

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting Kljdpjcmat Ujfx Ahvep more photos an questions

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Kedpfx Asxz Dqmehvelp Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: - 2-jaw drill chuck for up to 20 mm shank diameter Klodpfx Ahowkba Hevsp - Pneumatic position adjustment on 2 levels, 0-100 mm - Max. drilling depth 150 mm - Precision indexing rail 12 mm - Central locking and cross adjustment - 2 pneumatic safety clamping cylinders - Motor 1.5 kW - Speed 2800 rpm Dimensions (without stop): 1100 x 1100 x 1500 mm Weight: approx. 310 kg Availability: short-term Storage location: Röllbach

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Features and technical data: 2-jaw drill chuck up to 20 mm shank diameter Pneumatic positioning adjustment on 2 levels 0-100 mm Max. drilling depth: 150 mm Precision indexing rail 12 mm Center locking and cross adjustment 2 pneumatic safety clamping cylinders Motor 1.5 kW Speed: 2800 rpm Long hole drilling device, lowerable, with 2 program cams Klsdew I Uy Topfx Ahvjp Machine weight approx. 310 kg Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop) Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1999, functionality: fully functional, total length: 8,120 mm, total height: 2,300 mm, Vertical Hydraulic Press FAMAD HSKG 6m – Number of loading zones: 3 Kodeyuylnepfx Ahvjlp Dimensions of a single loading zone: – Loading height: 1140 mm – Length of battens in one zone: 1530 mm – Maximum batten width: 150 mm – Maximum length of glued elements: 3120 mm – Installed power: 3 kW – Number of cylinders per zone: - 3 pcs 50x100 mm - 3 pcs 80x100 mm – External dimensions (L x W x H): 8120x1000x2300 mm – Machine weight: 4800 kg

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Working dimensions: 3200 x 2200 mm Dimension adjustment is electrically controlled from the control panel. Kedpfsxmr Rxjx Ahvolp Powered by a hydraulic unit.

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Hydraulic frame press Kljdpexmr Spjfx Ahvop The machine is complete and fully operational Working range 3000 x 2000 mm

Condition: good (used), For sale: Wood processing line: - FOD DTRA 63 bottom-driven frame saw - 2 units - Log infeed conveyors - cross and longitudinal - Conveyors - Trolleys - Rails Machines are operational and in working condition Basic technical data for the FOD sawmill: Horizontal clearance mm 650 Kjdjyhzhhspfx Ahvolp Saw frame stroke mm 520 Clearance between rollers mm 80-570 Minimum log diameter mm 100 Maximum log diameter mm 550 Minimum log length mm 2200 Main shaft rotation speed rpm 300 Feed per main shaft revolution mm/1 rev. 4 - 30 Maximum number of saw blades pcs. 12 Main motor power kW 45 Feed motor power kW 4 Hydraulic unit motor power kW 2.2

Condition: reconditioned (used), Year of construction: 2026, machine/vehicle number: 2008 / 576, functionality: fully functional, power: 15 kW (20.39 HP), cutting height (max.): 250 mm, cutting width (max.): 150 mm, saw drive: 15,000 W, warranty duration: 6 months, NEVA warranty includes plug & play equipment: - material guiding per choice: channels, center guide, side guide Kodjyv D Taopfx Ahvjlp - 2 frames, 2 sets of saw blades and 2 sets of spacers - assembly frame and accessories - torque wrench, set of tools, etc. - machine after general overhaul in 02/2026 - new bearings, new linear guides, new rollers, new oil & air pipes, new clutch & brake, both crank arms new...Machine like new. The ORBIT Plus Thin Cutting Frame Saw was developed for cutting solid wood blocks into gluable slats with a minimum of saw kerf waste. Thin Cutting Frame Saw ORBIT utilizes a unique up/down method of movement for cutting veneer slats. Unlike conventional frame saws that move up and down in a lineal motion, the ORBIT Thin Cutting Frame Saw uses a patented swing-out motion at the bottom of the saw stroke. Applications of use: Parquet and engineered flooring, doors, windows, stairs, furniture, musical instruments, pencils, sport equipment (ski, snowboards, hokey sticks), wooden-covers for fruit and vegetables, etc. This unique movement of Thin Cutting Frame Saw ORBIT has several distinct advantages over the frame movements on older, conventional frame saws. With a conventional frame saw, a great deal of heat is generated by sawdust that is captured/packed into and around the saw blade teeth. This occurs because the sawdust and wood chips are unable to clear out from the blade during the upstroke. This fact is especially true when cutting high, as some of the teeth in the center of the saw blades never clear out of the cut. Because the ORBIT saw frame moves out of the cut during the upstroke, wood chips and sawdust fall clear from the saw blades. The result is less heat build up on the saw blade, longer saw blade life, dust free slats, the ability to use a thinner kerf saw blade and first of all increased production capacity of the ORBIT frame saw.

Condition: used, Technical specifications: Max. dimension of glued component: 1600 x 3000 mm 3 vertical presses 2 horizontal presses Hydraulic presses Power supply: 400 V Motor power: 1.5 kW Motor speed: 1450 rpm Overall dimensions: Length: 1200 mm Kodpfjyv Atrex Ahvjlp Width: 3500 mm Height: 2500 mm

Condition: used, Technical data: Total gluing length: 14 meters Two independent sections with separate controls: 6 m/unit and 8 m/unit Hydraulically operated clamps 12 vertical clamps 28 horizontal/rear clamps Power supply: 400 V Total motor power: 15 kW Possibility to purchase the 6 m and 8 m sections separately. Overall dimensions: Kledpfsx Id Diox Ahvop Length: 18,000 mm Width: 1,200 mm Height: 2,500 mm

Condition: ready for operation (used), total height: 4,900 mm, total width: 5,900 mm, total length: 8,500 mm, passage width: 3,900 mm, power: 11 kW (14.96 HP), empty load weight: 85,000 kg, load capacity: 400,000 kg, Portaalrichtpers 400 ton Model: GANTRY-400T Voor het gericht van assen, gietstalen producten, gewalste producten, smeedstukken met vrije matrijs, vlak staal maar ook voor het in- en uitpersen van lagers, bussen, krimpringen,... 14 individuele tegendrukcilinders in de tabel - 3 ton dop per cilinder - 100 mm slak per cilinder - Druk 300 kg/cm² - Doorgang tussen de staanders: 3990 mm Werksnelheid – bij max. druk: 2 mm/sec Terugloopsnelheid: 50 mm/sec Sluitsnelheid: 30 mm/sec Max ram adjustment: 1550 mm Klsdpfx Ahsyt S Uxovep Drawningspeed: 30 mm/sec Workingspeed: 2 mm/sec Returningspeed: 50 mm/sec Max distance between table - ram: 1550 mm Dimensions of the table: 7000 x 3200 mm

Condition: ready for operation (used), total width: 2,600 mm, total length: 3,100 mm, passage width: 1,250 mm, empty load weight: 25,000 kg, Model: HZPUX 150/100-1250/1000 Capacity: 230T Max ram adjustment: 1100 mm Max distance between table - ram: 2250 mm Ksdpfsyt S U Esx Ahvjlp Dimensions of the table: 1000 x 1250 mm dimensions stamp: 1000 x 770 mm Electric motor (power): 70 CV Courant needed: 380 V Height: 6200 + 1250 mm

Condition: reconditioned (used), functionality: fully functional, Hydraulic sharpening machine for frame saws. Grinding wheel diameter 250 mm. 4 built-in, switchable tooth profiles. 3 feed speeds. Kledpfx Aeyvtqnohvjp

Condition: new, Working width 3500 mm Working height 2300 mm Number of cylinders 4 St. Kjdpfxjd Rzc Re Ahvelp

Condition: excellent (used), working length 3300 mm Klsdpsyvhc Eefx Ahvsp working height 1800 mm 3 vertical cylinders 2 horizontal cylinders manual operating mode

Condition: excellent (used), Year of construction: 1998, Frame Dowel and Slot Mortising Machine by Hofmann HT 200 U with angle adjustment Specialized drilling machine for staircase construction, window manufacturing, and universal applications, featuring pneumatic height adjustment. Angled doweling and spindle boring for balusters can be easily performed thanks to the rotatable drilling unit. Motor with pole-changing capability, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start via convenient handle switch Precision chuck with two inserts: 16mm and M10 thread Table size approx. 1100 x 240mm Linear laser for precise positioning of the workpiece Drilling unit can swivel 65° to the left and right Pneumatic adjustment of the working height, doweling on two levels without repositioning Desired drilling heights can be set for each level using a handwheel and digital counter; switchover is then performed pneumatically from the front Cross adjustment approx. 320mm, stepless or in 12mm increments Drilling stroke approx. 200mm 2 pneumatic workpiece clamps, positionable at the front and rear of the table 2 swivel workpiece supports 2 side stops, also usable as front supports Mobile base Extraction port 80mm 4 used but good drill bits: 9, 12, 16, 19mm Minor paint touch-ups; excellent condition—see original photos A used swivel slot mortising machine in this condition is very rarely available. CE mark User manual Dimensions approx. 1200 x 1200 x 1200mm (LxWxH), weight 310kg. Klodpfx Ahjyfta Tsvop The machine can be demonstrated by appointment at our premises. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this seller."

Condition: good (used), Electro-hydraulic frame press Manufacturer: Hess Model: Hydro Nummer 1 Klsdpeyux Uuefx Ahvsp 1.1 kW Press dimensions: max. 3550 x 2550 mm The machine is in good condition.

Year of construction: 2012, condition: used, Hounsell down stroke Hydraulic forming press H frame Year 2012 200ton Daylight 750mm Nominal Table size W x L 2100mm x 1200mm Max Weight top tool 800kg Max system Pressure 340 bar Ram diameters 110mm Number of Rams 6 Seal Dimensions 110 x 130 x 16 Machine construction fabricated frame Machine weight 95000 kg approx Approach speed 150mm/s Pressing speed 8mm/s Kjdpfxsf A R Uhe Ahvjlp Return speed 80-90mm/s Can quote for new hydraulic presses c and h frame

Year of construction: 2005, condition: like new (used), Used Kojima 2200ton hydraulic H frame press for sale Machine Type Hydraulic Press Make Kojima Capacity 2200 tons Stroke 1200 mm Daylight 1800 mm Slide 3200 x 1800 mm Moving Bolster 3200 x 1900 mm Moving Bolster Stroke 2500 mm Moving Bolster Speed 100 mm/sec Die Cushion 100 – 500 ton Cushion Stroke 450 mm Cushion Pad 2000 x 1275 mm Cushion Pin 50 mm dia Klsdpelqxg Hjfx Ahvop Slide descending speed 235 mm/sec Hydraulic Tank 3200 litre

Year of construction: 1992, condition: excellent (used), Used 700ton H-frame hydraulic press for sale Make: Muller Capacity (ton) : 700 Number of pistons : 2 Table dimensions ( x-y/mm) : 4000×2200 Slide dimensions ( x-y/mm) : 4000×2200 Stroke ( mm) : 1400 Light at tdc ( mm) : 1920 Klodpehcfzkefx Ahvep Cushion power ( ton ) : 400 Cushion stroke (mm) : 500

Year of construction: 1990, condition: like new (used), Quality WMW 250ton C frame hydraulic press for sale The machine bed size is approximately 630mm x 850mm with an Opening/Daylight dimension of 300mm. The machine is fitted with a 150mm Packer plate which could be removed to allow for 450mm opening. Kledpsig Hzkjfx Ahvep

Year of construction: 1990, condition: good (used), Used Bemco 300ton C frame hydraulic press for sale Bed size 1200 x 900 Daylight 1150 Kledpfx Asg S Uc Dehvsp Stroke 700 Cylinder dia 300 New c frame presses available for sale 30ton 60ton 100ton 150ton 200ton 250ton and 300ton