Used Lifting Frame for sale (26,109)

Condition: good (used), machine/vehicle number: 2824, Year of construction: 2011, total length: 6,000 mm, total width: 2,400 mm, SHT LIFTING FRAME 20" from Uniktruck Bjdpfew Nbpkjx Ab Tjlr

Condition: used, Year of construction: 2023, Movable lifting frame, manual trolley, rolling trolley, crane trolley, trolley undercarriage, crane undercarriage, crane undercarriage, trolley, carrier undercarriage, overhead track undercarriage -Lifting capacity: approx. 5,000 kg -Condition: unused, without control -Year of construction: approx. 2023 -Track gauge chassis: 4025 mm -Distance between lifting arms: 3590 mm -Lifting arm projection: approx. 800 mm -vertical travel: approx. 1330 mm -Lifting drive: by gear/rack -Drive chassis: 2x SEW gear motor KA67 DRN80MK4/BE1/TF -Speed: 16 rpm -Power: 0.55 kW -Hollow shaft diameter: Ø 40 mm -Design: Hollow shaft angle -Protection class: IP 54 -Brake -Wheels for rail system: made of steel, 90 mm wide, with adjustable guide -Drive hoist: 1x SEW gear motor KA87 DRN100L4/BE5/TF -Speed: 13 rpm -Power: 3 kW -Hollow shaft diameter: Ø mm -Design: Hollow shaft angle -Protection class: IP 54 -Brake -Overall dimensions: 4725 / 2000 / H2420 mm -Total weight: 2000 kg Blsdpfx Aeucaimeb Ter

Condition: good (used), machine/vehicle number: 2823, Year of construction: 2011, total length: 12,000 mm, total width: 2,400 mm, SHT LIFTING FRAME 40" from Uniktruck Bsdpfx Absw Nbpdj Tjlr

Condition: refurbished (used), functionality: fully functional, Year of construction: 2001, operating hours: 59 h, load capacity: 1,400 kg, lifting height: 4,720 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, fork length: 1,200 mm, overall weight: 1,350 kg, empty load weight: 1,116 kg, total height: 2,600 mm, Equipment: CE marking, lighting, LINDE L14 pedestrian stacker in very good condition for sale. 4.7 m capacity. Manufacturer: LINDE L14 Bledpfjxh A Hysx Ab Tor Refurbished in 2022 and battery pack replaced. Serial number: W4 X372 M Year of manufacture: 20001 Operating mode: Electric Mast type: Triplex tower Rated capacity: 1400 kg Lift height: 4700 mm Fork length: 1150 mm Overhead height: 2400 mm Condition: Ready for use and fully functional Technical condition: Very good Load center: 600 mm Operating hours: 58 hours since overhaul. Battery: 24/260 Ah HAWKER Charger: 24 V Linde charger Rear weight: 1115 kg Battery: 240/280 kg

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m - total width: 1200 mm - height: 950 mm Bodpfxjtddw Ae Ab Tjlr Hydraulic lift, lifting capacity around 1 ton.

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Bodpfxocmat Us Ab Tslr Mechanical compression setting more photos an questions

Condition: new, 2 Storey R-Linear Steel Frame Houses Insulated PVC Windows Throughout Boiler, Fridge, Cooker, Bathroom All New - Never Lived In Dimensions: 5m x 9.5m x 3m Weight: 12 tonnes Bsdpfx Abjw R Tk Aj Tslr

Condition: used, Year of construction: 2015, Beading machine Bljdpfx Abewrywge Tor DS-Lifting - H-9000

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 336080, lifting height: 94 mm, load capacity: 1,300 kg, No reserve price – guaranteed sale to the highest bidder! Blsdpfxexyh Ado Ab Tsr Placing a bid obligates timely collection by 31 December 2025! TECHNICAL DETAILS Load capacity: 1,300 kg Lifting height: 94 cm

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,927 kg, axle configuration: 3 axles, first registration: 10/2018, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2018, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - Schmitz Rotos Full air suspension Insulated rear doors with 4 steel lockrods, TAPA - door Lock FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Length/width/heigth - 1341cm/249cm/265cm Max weight - 42 000 kg Bsdpfx Aoxrry Deb Tjlr Own weight - 8 927 kg 3 axles Pallet rack for 24 Euro pallets

Condition: used, machine/vehicle number: WSM0000000201xxxx, Year of construction: 2017, Please contact ATS Norway for more information Please provide reference number upon request: 21944 Bedpfxsx Am S As Ab Telr Specifications: - Eu-approved until 30.04.2026 - 3 axles - Lift on 1 axle - Tires (see pictures) - 33 pallet cabinet - Zepro Lift element, 2000 kg - Remote control - Ready for delivery Technical approved: Yes EU-approved until: 30.04.2026 Own weight: 8280 Total Weight: 45000 Payload: 36720 Width: 260 Length: 1385 Model: Skapsemi

Year of construction: 2015, condition: used, 2015 | Probst BZ Lifting pliers for kerbstones, hand | Used Small Equipment ❓ Want the expert inspection report with 1 checked points, 5 extra photos and a full video? Contact us! 💡 Listed in a Bid-to-Earn auction: Blodpfx Aox Agcneb Tor ✔ Earn rewards while bidding – see your reward for each bid ✔ Get your full bid amount back if outbid ✔ Rewards are credited when the reserve is met ✔ Highest bidder wins when the auction ends 💡 Why choose us? ✔ Fully inspected machines ✔ Delivered to your jobsite – :articulated_lorry: estimate your shipping cost with our calculator ✔ Money-Back Guarantee ✔ Secure payment methods incl. pay-at-delivery option ✔ Data-driven market pricing 📍 Location: Estonia, Tallinn This machine is available on the Equippo Marketplace as part of a special BID TO EARN AUCTION format.

Condition: used, Year of construction: 2011, Technical details: traction force: 1600 N (Zuglast: 3000 kg) N control: SPS Steuerung EdmoLift UC-60 Lifting height: gesamt: 1350 mm total power requirement: 1,5 kW Tare weight: ca. 850 kg dimensions LxWxH: 1,9 x 1,6 x 0,9 m Scissor lift table / lifting device Bodpfx Asx Adbusb Telr Application: for assembly work for rail vehicles, agricultural and/or construction machinery, as well as for lifting and lowering engines, for maneuvering Self-propelled lift table with maintenance holder -Driven by remote control (2x BlackMax rechargeable battery/battery optionally available for sale) Lift table with undercarriage: Size L: 1300 x W: 800 mm; effective stroke 820 mm; max. lifting height 1070 mm; lifting force 175 bar; operation via manual control element with dead man's function; AL-KO chassis type AMS1 -Cable remote control with winch (approx. 3 m) -Cable remote control for lifting/lowering approx. 2.7 m i.D. *

Condition: used, Year of construction: 2016, operating hours: 2,886 h, machine/vehicle number: ZX135H-3212, fuel type: diesel, Weights Empty weight: 20.604 kg Functional Mast: articulated arm Lifting capacity: 272 kg Working height: 4.315 cm Other information Front tyres / undercarriage remaining: 60 Rear tyres remaining : 60 Tyre brand: Outrigger Max. horizontal reach: 2126 m Transport dimensions (LxWxH): 12.9x2.5x3.1 Bledpfx Aexz Nygsb Tjr Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Bljdpfoxz Dqmsx Ab Tor Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 05/2018, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2018, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SAF axles Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock EBS-braking system, 2S/2M, 2 sensors on 1 axle 1 pair(s) of load lock rails, horizontally, inserted into side walls Bjdpfx Aexrruhsb Tslr Disc brakes 430 mm incl. 2 temperature sensor Ventilation flap, at the front wall, at top of left side, Ventilation flap, small, at rear, right si Lift axle control for 1st axle Low noise aluminium floor, suitable for PIEK floor, tested according to CSC/EN 283, reinforced at re Spare wheel holder as fixed basket for one spare wheel, right side, behind axles, 2nd spare wheel ho 1 spare wheel (6+1) tyres - 385/65R22.5 12 sets of double deck rails, type Airline, inserted into side walls, full length 1.600 mm from the Loading capacity 33 / 66 euro paletts Internal Length/width/heigth - 1331cm/246cm/265cm Gross vehicle weight: 39.000 kg Own weight - 8 813 kg 3 axles Pallet box for 24 Euro-pallets

Condition: new, fuel type: gasoline, overall weight: 1,300 kg, operation weight: 1,200 kg, maximum load weight: 1,500 kg, lifting height: 1,000 mm, Year of construction: 2025, Equipment: hydraulics, Befard XM1200 - NEW TECHNICAL SPECIFICATION: • Lifting capacity 1200 kg - PICK&CARRY • Lifting capacity 1500 kg - with optional equipment • 3 hydraulic extensions • Arm opening angle 65 degrees • Vertical reach 10 m - with optional equipment • Non-marking tracks • Extendable chassis in the range of 780-1250 mm • Radio control • Column rotation 50 degrees • Knee gear • Possibility of using a 500 kg or 990 kg winch - optional • LED lighting fixed + magnetic AVAILABLE POWER SUPPLY VERSIONS: 3in1 - petrol engine, electric motor (230 V, 400 V, 110 V to choose from) and lithium-ion batteries Combustion - powered only by internal combustion engine, Combustion electric - powered by internal combustion engine and electric 230 V, 400 V or 110 V OPTIONAL EQUIPMENT AVAILABLE: • Winch 500 kg or 990 kg to choose from • Manual JIB arm - increases the reach by 1 m - You can use 2 pcs. Manual Jib for the crane • Searching hook - works in 6 positions, increases the reach by 0.5 m Bledpfsx A Uc Asx Ab Tor • Hydraulic blade - An additional support blade at the front of the machine extends manually and lowers hydraulically. Additional options are available for the blade: • Forks • Tow hitch: Increases stationary lifting capacity to 1500 kg. Increasing the stationary lifting capacity to 1500 kg and the possibility of using an additional Jib arm • Radio control with display • Platform for standing on the machine - Platform for standing on the machine, as an increase in counterweight (not necessary in standard use) • Extension to the loading platform - Removable extension to the loading platform by approx. 500 m • Suction cup with hydraulic head - Suction cup with hydraulic head controlled from the remote control. Possibility of removing the suction cup and installing the hook. Head mounted at the end of the hydraulic extension • Holder for XP attached to the platform - Holder for XP glass gripper attached to the platform • RAL color - Choice of machine color from the RAL palette • Tow hook - Possibility of using a tow hook for the crane's transport platform • Ramps - Aluminum ramps 2.5 m long Befard XM1200 is a modern mini Pick & Carry crane designed for maximum functionality and mobility in difficult working conditions. Thanks to its compact dimensions, it easily fits through a standard door, and extendable tracks up to 1250 mm wide ensure stability and safety during crane operations. This versatile model offers an impressive reach of up to 10 meters - which allows work at the height of the second floor. The XM1200 mini crane can move with a load of up to 1200 kg, and with the use of support legs its maximum lifting capacity increases to 1500 kg. Optional equipment in the form of a winch additionally increases the flexibility of applications, making the XM1200 mini crawler crane an ideal solution for assembly, service, industrial or construction work. Possibility to test the equipment before purchase. * The price in the offer refers to the basic version powered by a petrol engine * ​​Product on order * Net price

Year of construction: 2013, condition: used, 2013 | Probst BZ Lifting pliers for kerbstones, hand | Used Small Equipment ❓ Want the expert inspection report with 1 checked points, 5 extra photos and a full video? Contact us! 💡 Listed in a Bid-to-Earn auction: ✔ Earn rewards while bidding – see your reward for each bid ✔ Get your full bid amount back if outbid ✔ Rewards are credited when the reserve is met ✔ Highest bidder wins when the auction ends 💡 Why choose us? ✔ Fully inspected machines ✔ Delivered to your jobsite – :articulated_lorry: estimate your shipping cost with our calculator ✔ Money-Back Guarantee ✔ Secure payment methods incl. pay-at-delivery option Bsdsx Af Tropfx Ab Tjlr ✔ Data-driven market pricing 📍 Location: Estonia, Tallinn This machine is available on the Equippo Marketplace as part of a special BID TO EARN AUCTION format.

Year of construction: 2016, condition: used, Technical details: wheel base: 950 mm lifting capacity: 25000 kg Lifting height: 1310 mm Tare weight: 2100 kg dimensions LxWxH: 1,7 x 2,0 x 0,75 m total power requirement: 11,2 kW WHEELSET CHANGING SYSTEM - WHEELSET SWIVEL Application: Changing wheelsets and driving sets for railroad applications (locomotives, freight wagons, etc.) 2 speed levels forward/backward 2 speed levels lifting approx. 60 sec./lowering approx. 110 sec., operation via manual control unit shift left/right +/-20 mm Bodpfx Abox Ac R Uj Tolr Lift category 5 EMERGENCY OFF Platform: L: 1420 x W: 657 mm, effective stroke 1050 mmOperating pressure for hydraulics = 185 bar Speed of chassis = 2 stages min. 18 mm/sec. Center distance: 950 mm Equipment: 10 m connection cable with 380 V *

Condition: good (used), C-frame press Capacity unknown, estimated pressing force 40 tons Maximum workpiece height: 250 mm Throat depth: 510 mm Stroke: 250 mm Blsdpfsx A Tygjx Ab Tsr Weight: 3000 kg Stroke up and down adjustable via limit switches Note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we advise you to verify all relevant details. Financial information VAT/margin: VAT: The shown price is excluding VAT (VAT deductible for businesses)

Condition: used, Year of construction: 2021, = Further options and equipment = - ABS - Electric exterior mirrors - Electric windows - Speed limiter - Alloy wheels - Reversing camera - Stability control - Cruise control - Alternating current Bledpfxox A S Hro Ab Ter - Central locking = Further information = General information Year of manufacture: Feb. 2021 Mileage: 116,476 km Drivetrain Fuel type: Diesel Transmission Transmission: 6-speed, manual gearbox Axle configuration Drive: Front-wheel drive Tyre size: 225/65R16C 112/110T Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Steered; Left tyre tread: 3 mm; Right tyre tread: 3 mm Rear axle: Left tyre tread: 7 mm; Right tyre tread: 6 mm Weights Kerb weight: 3,049 kg Payload: 451 kg Gross vehicle weight: 3,500 kg Environment Emission class: Euro 6 Condition Damages: none

Condition: used, Year of construction: 1994, Frame press Schafberger & Sprödhuber Type Super 4 Kw 3 m x 6 m Bjdoilurnopfx Ab Tjlr

Condition: excellent (used), mileage: 96,235 km, first registration: 05/2008, fuel type: diesel, color: green, axle configuration: 4x2, fuel: diesel, gearing type: mechanical, emission class: euro4, suspension: steel, Year of construction: 2008, = Additional options and accessories = - PTO (power take-off) Blsdpoxm Tdyjfx Ab Tsr = Further information = Driveline AdBlue system: Yes Axle configuration Suspension: Leaf springs Front axle: Steered Rear axle: Twin tyres Dimensions Dimensions (L x W x H): 725 x 220 x 336 cm Weights Unladen weight: 5,890 kg Payload: 1,610 kg Gross vehicle weight: 7,500 kg Condition Technical condition: very good Visual condition: very good Further information Please contact Thierry Leemans for more information.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,806 kg, axle configuration: 3 axles, first registration: 05/2018, total length: 13,400 mm, total width: 2,460 mm, suspension: air, color: white, Year of construction: 2018, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SAF axles Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Tool box, PVC, left side behind the axles, dimensions approx. 650x490x450 mm Fuel tank plastic, for approximately 240 ltr., tank opening on both sides, cover with cylinder lock EBS-braking system, 2S/2M, 2 sensors on 1 axle Bedpjxzq Ekefx Ab Tolr 1 pair(s) of load lock rails, horizontally, inserted into side walls Disc brakes 430 mm incl. 2 temperature sensor Ventilation flap, at the front wall, at top of left side, Ventilation flap, small, at rear, right si Lift axle control for 1st axle Low noise aluminium floor, suitable for PIEK floor, tested according to CSC/EN 283, reinforced at re Spare wheel holder as fixed basket for one spare wheel, right side, behind axles, 2nd spare wheel ho 1 spare wheel (6+1) tyres - 385/65R22.5 12 sets of double deck rails, type Airline, inserted into side walls, full length 1.600 mm from the Loading capacity 33 / 66 euro paletts Internal Length/width/heigth - 1331cm/246cm/265cm Gross vehicle weight: 39.000 kg Own weight - 8 813 kg 3 axles Pallet box for 24 Euro-pallets

Condition: used, Year of construction: 2010, operating hours: 2,268 h, = Additional options and equipment = - Power take-off (PTO) = Notes = OIL & STEEL 10M AERIAL WORK PLATFORM VERY CLEAN VEHICLE Bljdpfx Aexmbkusb Tor EVERYTHING WORKS READY FOR IMMEDIATE USE = Additional information = General information Year of manufacture: Nov. 2010 Mileage: 42,225 km Color: White Drivetrain Fuel type: Diesel Weights Unladen weight: 3,350 kg Payload: 150 kg Gross vehicle weight: 3,500 kg Condition Overall condition: very good Technical condition: very good Visual condition: very good Further information Please contact Thierry Leemans for more information.