Frame press

Schafberger & Sprödhuber T2 STUDIO

Condition: new, Year of construction: 2026, The composition of the cabinet handling systems to create a manual, semi- or fully-automatic cabinet assembly line is depending on individual production requirements. Cgodsdx R D Dspfx Ailow Cabinet assembly lines that will make work easier, reduce set-up time and increase precision, we will explain to you in a personal conversation.

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Cgedpfx Aisiidm Nelsw Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Total height 1500 mm Codpfxjdpbn Ae Ailegw Total length 3000 mm 5 pneumatic cylinders Compressed air pressure 8 bar Travel of pneumatic cylinders 100 mm Diameter of pneumatic cylinders 100 mm

Condition: new, Year of construction: 2025, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 2 t, stroke length: 100 mm, total length: 4,120 mm, total width: 2,300 mm, total height: 2,650 mm, overall weight: 2,000 kg, working width: 2,000 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 180 mm, height adjustment type: mechanical, pressure plate depth: 120 mm, warranty duration: 12 months, working height: 180 mm, Double Hydraulic Frame Press – Industrial Solution for Precise and Efficient Assembly Designed for demanding production environments, this double hydraulic frame press delivers high levels of adaptability and structural integrity, making it ideal for assembling wooden frames – from windows and doors to custom furniture components of various shapes and sizes. Maximum Flexibility for a Wide Range of Applications Thanks to its intelligent engineering and adjustable clamping systems, the press quickly adapts to frames of different thicknesses and geometries without requiring complex setups or manual intervention. Changeovers between workpieces are fast and effortless, significantly increasing production efficiency. Industrial-Grade Construction for Heavy-Duty Use The press frame is built from high-quality structural steel, engineered for enhanced rigidity and operational stability under heavy loads. The side beams are machined from a single solid piece, eliminating potential weak points caused by joints or welds. Strategically placed reinforcements minimize torsional deformation during pressing, ensuring the precise alignment and perpendicularity of all frame components. This robust design not only enhances operational safety but also extends the lifespan of the equipment, even under continuous industrial use. Efficient Hydraulic Pressing with Accurate Force Control The system integrates 10 high-efficiency hydraulic cylinders (6 vertical, 4 horizontal) that apply uniform and controlled pressure across the entire surface of the frame. This ensures consistent joint compression and even adhesive distribution, eliminating gaps or weak spots. Additionally, three frontal pressing systems guarantee correct contact between the workpiece and the pressing tables, optimizing positioning prior to clamping. Modular pressing pistons with quick-lock mechanisms can be easily repositioned to suit the size and shape of the frame, enabling targeted pressure exactly where needed. This is especially beneficial for complex geometries or structurally sensitive zones. Simplified Operation via Fully Automated Hydraulic System Equipped with a high-capacity hydraulic pump, the press operates autonomously without requiring external pressure sources. Pressing functions and pressure adjustments are activated via intuitive electric controls, eliminating physical strain on the operator. Each work zone is equipped with an independent foot pedal, allowing localized operation for increased flexibility. The hydraulic pump is designed to maintain stable and consistent pressure throughout the pressing cycle, ensuring uniform results from start to finish. Engineered for High-Performance Industrial Production This double frame press excels through: Csdpfx Aiowgybuolegw large-scale processing capacity, adaptability to various frame types and materials, efficient and reliable operation. It is the perfect solution for companies operating in heavy-duty production environments, providing a genuine competitive edge in assembly operations, both in terms of speed and precision. Technical support available in english - romanian - german.

Condition: used, Year of construction: 2024, New display machine! List price: €32,665,- complete in standard configuration with: Sturdy, torsion-resistant steel frame constructed with welded and bolted assemblies. Louvered top press beam with 6 elements; louvered side press beam with 5 elements. Louvered press beams feature the proven Ganner system tolerance compensation for tightly pressed carcass joints. Counterpressure surfaces (side pressure wall and bottom) are 38 mm thick, coated, continuous support plates. Continuous pressing surface with a height of 95 mm at the lower vertical press beam. Electromotive adjustment of both press beams via precision trapezoidal threaded spindles (with increased pitch and running accuracy) and high-performance running nuts with grease reservoir. Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW). The pressing force of the press beams is continuously adjustable via 2 potentiometers and controlled electronically by frequency converters, ensuring absolutely wear-free force control. Pressing force for the horizontal press beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg). Pressing force for the vertical press beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg). Pressing and adjustment speed of the press beams with fine positioning, selectable via three-position rotary switch: 5 / 10 / 25 mm/second. Very simple operation using 6 separate push buttons; 8 movement sequences selectable via control system. Freely adjustable pressing time preselection with automatic opening from 0–30 min (switchable to seconds or hours). Working height/feed height: 300 mm. Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm. Weight: approx. 1800 kg net. Dimensions (Length x Width x Height): 3.45 m x 0.95 m x 2.30 m. Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A). Additional equipment: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams. Pressing speeds of 5 / 10 / 25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for pressing special components. 1 set of machine feet (working height 500 mm). Cjdpfx Asuf Hx Hoilogw Storage location:

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Frame press T2 RP Year of manufacture: 1986, 2.2 kW Electro-hydraulic 3 vertical and 2 horizontal press cylinders Pressing pressure adjustable 0 – 2000 kg Pressing dimensions: 2500 x 3000 mm Required space: 4000 x 950 x 2600 mm Transport available at extra cost! Due to the age of this used machine, warranty is excluded when selling to commercial customers. Csdju Rp Eispfx Ailegw

Condition: new, 3000 mm Working width 600 mm Wheel width 600 mm roll diameter 90 mm number of rolls 12 Stck. work height max. 800 - 950 mm Colour blau / rot Csdpfeuap S Ssx Ailjgw weight 200 kg - straight version - stable construction - high load-stable stability - Height-adjustable feet

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Lamella – Carcase Press with Rapid Traverse Technical specifications: Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm, depth 700 mm; - Upper lamella pressing beam with 6 elements, side lamella pressing beam with 5 elements - Lamella pressing beams with field-proven tolerance compensation for tightly pressed carcase joints - Counter-pressure surfaces are continuous, coated support plates, 40 mm thick - The pressing force of the pressing beams is infinitely variable via two potentiometers and set electronically via frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressing beams: min. 500 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Pressing force for vertical pressing beams: min. 300 daN (kg) up to infinitely adjustable 2,200 daN (kg) max. - Including option: Rapid traverse speed for quick positioning of the pressing beams, controlled by automatic workpiece detection with sensors in the pressing beams; pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. Sensors can be deactivated for pressing special parts. - Jog mode for precise positioning of both pressing beams, e.g., for low pressing forces, drawers, and carcases at 45 degrees. Easy operation via six separate push buttons, freely adjustable pressing time preselection with automatic opening feature, loading height 300 mm. The machine is available from our showroom and can be delivered immediately. Codpfx Aisy Egz Selogw Location: ex-stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3030x450x660 mm Weight 325 kg Cjdpsv A Hw Aefx Ailjgw Total power requirement 0 kw

Condition: new, Bernardo Gluing Press HVS 3000 The HVS 3000 gluing rack stands out for its universal application, as well as its easy and quick operation, making it indispensable for daily use in workshops and carpentries. Technical Specifications Working length: 2800 mm Working height: 1460 mm Cylinder stroke: 65 mm Pressing force: 2500 kg Vertical hole pitch: 50 mm Total length: 3000 mm Total height: 2070 mm Frame depth: 925 mm Weight: approx. 198 kg Csdpfxoxrnu De Ailogw Features • Suitable for a wide range of applications such as solid wood gluing, door manufacturing, edge banding, etc. • Robust gluing press with solid steel construction • Faster and more efficient bonding compared to screw clamps • Supplied as standard with 4 adjustable pressure beams and 1 pressure bracket • No tilting of pressure cylinders due to double spring-mounted guide Scope of delivery • 4 movable pressure beams, each with a vertical hand hydraulic cylinder and counter support • 1 movable, adjustable pressure bracket