LOADER (BRIDGE-FRAME) DOUBLE PICK-UP

MEINERT (IMA Group) P 416 (D/B 3000/1300) Concept

Condition: like new (used), WEINIG Hydromat H30N, S/N 253-886, year 1991, 9 spindles Hydromat H30 with short infeed table and heavy 6-roller infeed - Working width max. 300 mm - Working height max. 140 mm - Electronic feed infinitely variable 12 - 120 m/min. - Feed motor 22.0 KW - 1st spindle bottom 11.0 KW - 2nd spindle right 11.0 KW - 3rd spindle left 15.0 KW - 4th spindle left 11.0 KW - 5. spindle right 11.0 KW - 6. spindle top 22.0 KW - 7. spindle bottom 30.0 KW - 8. spindle top 11.0 KW - 9. spindle bottom 11.0 KW - All spindle motors with electronic brake - COMPLETELY NEW MILLING SPINDLES - Spindle diameter ø 50 mm - Spindle speed 6,000 rpm. - 6 driven rollers in the table - hard chrome plated - Spindle 1 + 6 + 7 + 8 + 9 with NEW counter bearing - Hydraulic counter bearing clamping - Spindle 2 + 3 + 8 + 9 with straight jinter - Spindle 4 + 6 pneumatic pressure - NEW feed rollers D=170 mm - Hard chrome-plated table tops - Hard chrome plated stops - - Heavy pressure rollers from above - pneumatic - Heavy pressure rollers from the side - pneumatic - Automatic table lubrication - NEW Ndsdjtynpxspfx Abged - Central position of the lubrication points - NEW control panel free-standing, 5m cable - NEW free-standing control cabinet, 5m cable - Operating instructions, spare parts list and wiring diagram + Many NEW spare parts / accessories. Dimension: - Total length approx. 6,150 mm - Total width approx. 2,160 mm - Machine weight approx. 9,500 KG Connected load: - Total connected load approx. 157 KW Condition: Machine as shown on the photos - technically as good as new Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: At any time by appointment Offers + inquiries only with complete company data Subject to errors and prior sale

Condition: new, Year of construction: 2025, Holzkraft band saw HBS 533 S. Heavy professional design with high dead weight for maximum running smoothness especially smooth and precise running thanks to torsion-free machine housing large dimensioned cast iron saw table in one piece, tiltable from 0° to +20° with ground and polished surface patented table tilting device with hand wheel and toothed rack saw band quick clamping ceramic saw band roller guide large cast iron parallel fence fast and precise cutting height adjustment via handwheel and toothed rack with millimetre scale safety switch for automatic shut-off when opening the door large cast iron parallel fence standard with angle stop flywheels made of grey cast iron with special coating on the running surfaces Inspection window for checking the saw blade running Professional saw table guide the heavy, massive saw table made of grey table is easily and comfortably adjusted by a handwheel rack and pinion guide system the inclination is steplessly adjustable from 0° to +20°. Patented working table dimensions 750 x 530 mm cutting speed 1400 m/min. flywheel Ø 530 mm max. cutting height 350 mm max. cutting width with fence 465 mm Nodpfx Aeb S Uzkebgodd max. cutting width without fence 510 mm band saw blade length 4190 mm precision guide top / bottom saw table inclination 0° - +45° motor power 400 V/50 Hz/P2 4,0 kW Weight 305 kg Dimensions 1000 x 720 x 2040 Suction port diameter 2 x 100 mm Location: ex stock Bitburg

Condition: used, Year of construction: 2013, machine/vehicle number: 15513, Polishing machine Gottschild HBS 1600-750-100-1(2) The Gottschild grinding and polishing machine offers a wide range of applications, from the production of high gloss furniture fronts, glass panels to Corian • grinding and polishing. • Easy change between grinding and polishing head • with sinusoidal tool head oscillation, for an even better uniform high- gloss surface which satisfies even the highest demands. • with automatic part detection (machine only designed for rectangular parts) Technical data: • Type: HBS 1600-750-100-1 • Year of manufacture 2013 • Electrical connection 400V, 50 Hz, 4,5 kW, 10 A • Compressed air 6 bar connection adjusted to 5 bar • Conveyor belt 1.600 mm x 940 mm • part width: 90mm- 750mm (without tool brigde 850mm) • part length: 150 mm - 2.800mm • part heights 8-100 mm (extended working height) • Frame size 1600 mm x 1200 mm • Rack height approx. 960 mm ± 25 mm • Frame material welded steel tube • Support for superstructure aluminum profiles • Belt cleaning manual every 8 hours • Safety devices emergency stop. • The machine has to be shielded by protective walls if the machine is delivered without housing. • Polishing motor 400V, 50 Hz, 0,75 kW with planetary gearbox • Control Siemens/Vipa S7 PLC, parameters via KEB Touch Panel • Frequency converter KEB • Control elements control ON/OFF, RESET, START/STOP, program interruption, grinding head speed, oscillation speed and belt speed • Tool bridge: Tool bridge with polishing head, consisting of a linear profile system, driven by linear cylinder. • Without polishing pad for the polishing head Location: on stock PICTURES of an identical machine built in the same year Ndsdpfxju Afu Dj Abgod

Condition: reconditioned (used), Shrinking tunnel / foil wrapper Make: Kallfass Type: semi/automatic shrinking tunnel Model: Combimatic 600 Frame: steel painted Range: max. packet W x L x H = 600 x 380 x 400 mm Capacity: max. 600 packs/min Dimensions: L x W x H = 4 200 x 1 550 x 2 000 mm Weight: 850 kg Power-supply: 380 Volt - 50Hz - 23,5 kW Features: mobile water-cooled welding beam automatic / semi-automatic 2 hand control Remark: excellent condition Nedpfx Aog D Nyhsbgedd

Year of construction: 2024, condition: new, The flattest wooden frame construction table in the world = 3 cm! Delivery without wooden boards. Ndedpob Nrbnsfx Abgjd Text line break with the following data: Included components: 1 double rail (zero stop) - 10 perforated rails - 10 rack and pinion clamps - 14 adjustable stop blocks - 14 interchangeable pressure plates outer wall - Battery impact screwdriver - Bit adapter - 50 MMS 10x70/5 dowel - Hammer drill 8x165 dimensions: Clamping length from 0 to 3.550 mm hole grid 140 mm with plate width 1.250 mm = table length 12.350 mm max. clamping force approx. 250 kg stroke length clamp 340 mm height of stop blocks 100/160 mm The frame building aid was developed in order to precise production of timber frame elements. elements. Special attention was paid to the space requirements and the price. Due to the extremely flat it is now possible to change the surface by removing the the space by removing the clamps and stops. used in a different way. This is not only for small, but for all but for all company sizes a special advantage. After creating a flat surface, the tensioning rails are rails are aligned and anchored to the anchored to the floor. The intermediate spaces are covered with a 30 mm thick wooden panel to be mounted on site. filled. The same plate can be used to attach ramps to the edges. can be attached to the edges with the same plate. The level created in this way level can also be driven on with heavy vehicles vehicles, or can be used as a storage area. Thus the place can be activated only if necessary for the timber frame construction. be activated. The steel parts are galvanized. The entire assembly takes place on site. After adjusting the T [...]

Year of construction: 1999, condition: used, The DSG 200 vertical sawmill is an ideal option for carpentry shops specializing in furniture and wood flooring, it is efficient and performs effectively. A used Wintersteiger mini wood sawmill is a very good investment, a big plus of this machine is that it doesn't take up as much space as standard devices of this type, and at the same time it is great for processing raw material. It is used for cutting individual pieces and fitting them to the appropriate size. Operation of this device is not particularly complicated and can be learned quickly. The biggest advantage of our sawmill is its rich equipment, which includes, first of all, a saw sprinkler system, controlled from the panel, which allows precise cutting of wet raw material. It has an independent control for adjusting the height of the upper rollers, which makes it possible to set the height of cut faster. Pneumatic pusher to assist the feed TECHNICAL DATA: -Total power 27.3 kW -Air Jet system motor 2.3 kW -Siemens control panel -Propulsion up to 2m/min -Stroke of traction frame 210 mm -Stroke count 400/min -Cutting height, continuously (steplessly) adjustable on our frame 45-250 mm -Maximum cutting height possible is 400 mm ! -Cutting width with side pressure 80-205 mm -Block length min. 250 mm -Lam thickness from 1.5 mm - depending on the type of wood and cutting height -Blades used : 0,9-1,1 mm -depending on cutting height Ndsdotvm Hdepfx Abgsd -Length approx. 5000 mm -Width approx. 1300 mm -Height approx. 2600 mm -Weight : 5000 kg Pneumatic pusher to assist the feed We add to the machine: -complete large saw frame , -small saw frame, -frame pins, -clamps for stretching the frame, -saw attachments, -wet cutting saws, -dry cutting saws , -a set of top pull rollers, - 4 pcs of bottom pull rollers, -complete sliders, -frame yokes, -pocket cutting guides , -loading magazines, -DTR documentation -electrical diagram

Condition: good (used), functionality: fully functional, SMELT professional Coating line LED/ All machines are used and still working well. Nodopyg Itepfx Abgjdd

Condition: excellent (used), ROLLER COATER (REVERSE) Max working width mm 1300 Length of the machine mm 1600 approx Built-in Electric and command cabinet Feeding system by motorized rollers (power KW 0.75) Feeding speed adjustable (from 6 to 24 m / min) Total installed power KW 4.1 No. 2 working heads: * 1st head (with 2 rollers) Chromium plated Dosing roller diam. mm 174 + Rubbered Spreading roller diam. mm 248, with 2 adjustable speed variators (power KW 0.37 + KW 0.75), with also a counter-placed (bottom side) reference rubbered roller * 2nd head (with 2 rollers) Chromium plated Dosing roller diam. mm 174 + Rubbered Spreading roller diam. mm 248, with 2 adjustable speed variators (power KW 0.37 + KW 0.75), with also a counter-placed Ndodpfx Asidqwpsbged (bottom side) reference rubbered roller

Year of construction: 2019, condition: new, Booth KPZ-4P • Booth Type Closed drive-thru • Worksize dimensions 3500 width x 1800 height x 1000 depth • Overall dimensions 3300width x 2300 height x 1800 depth • Power supply Electric • Nominal power 0,69kW x4 • Voltage 380V • Frequency 50-60Hz • Filters 100% Polyester • Filters count 4 • Filters hang type Bagnet type, easy on/off • Filter area 30m2 • Filter cleaning system Pneumatic - Jet Venturi Nodpfx Aobxmfnjbgjdd • Ventilator type Aluminium ray rotor . • Air consumption 20,400m3/h • Loudness 74dBa • Doors Double, both side • Inside drive diameter 800mm

Condition: as good as new (ex-display), A manual demonstration bending machine WIEGAND bending length: 1020 mm bending capacity: 2,5 mm max. bending angle: 0 - 135°. segmentation of the upper beam: 270; 200; 150; 100; 75; 50; 45; 40; 35; 30; 25 mm opening width of the upper beam: 45 mm backgauge manually adjustable up to: 540 mm Nedpfx Aspgmtwobgodd weight: 285 kg