Support grinder for lathe, grinding attachment for lathe for external cylindrical grinding

FEIN MB 2101

Condition: new, Year of construction: 2023, functionality: fully functional, Drying system / dryer suitable for various materials such as powder, granulate etc. Nledpfsqu R Nasx Ad Sjc - Control for temperature regulation This machine is connected and ready for testing in our machine hall.

Condition: like new (used), Center height over bed: 330 mm, max turning diameter over carriage: 408 mm, max turning diameter over bed: 640 mm, max turning diameter in gap: 899 mm, distance between centers: 2000 mm, variable spindle speed, rpm: 18-1500, spindle bore diameter: 105 mm, spindle nose: ASA 11”, tailstock: MT5, quill diameter: 90 mm, travel: 250 mm. cross slide travel: 275 mm. main motor: 15 hp. machine weight: 3450 kg. Nledpfsx Dikkjx Ad Soc

Condition: like new (used), Year of construction: 1998, functionality: not functional, turning height: 1,900 mm, workpiece weight (max.): 15,000 kg, turning diameter: 2,630 mm, faceplate diameter: 2,500 mm, total height: 5,000 mm, total width: 4,800 mm, total length: 4,800 mm, rotary table diameter: 2,500 mm, table load: 15,000 kg, table diameter: 2,500 mm, year of last overhaul: 2025, warranty duration: 12 months, overall weight: 38,850 kg, table speed: 2,500 mm/min, SC2700 Vertical Turning Lathe 2700 with 2 Work Heads - Retrofit Completed Specifications: Retrofit status: recently upgraded (mechanical, electrical, hydraulic systems), in course to be put under power. Nlsdpsygldgjfx Ad Sjc Electric cabinet: new electric equipment, cables, portcables, covers. Main motor: original 55 kW, revised. Condition: mechanically like-new, low working hours. Inspection: available any time. At request, it can be overhightened for a higher workpiece, or receive an CNC upgrade. Price, install and transport on request. More technical specifications on request.

Condition: new, Year of construction: 2025, turning height: 2,000 mm, workpiece weight (max.): 12,000 kg, faceplate diameter: 2,000 mm, CNC Vertical Turning Center Model: VTC-20/30 with Fanuc 31i-B Table diameter: Ø2,000 mm Maximum swing diameter: Ø3,000 mm Maximum turning height: 2,000 mm Table speed: max. 200 rpm Table load capacity: 12,000 kg Table indexing: 0.001° Z-Axis (vertical ram travel): 1,200 mm Main spindle speed: max. 15 ~ 2,000 rpm Nlodpfoxqb D Nox Ad Sec Ram size: 240 mm x 240 mm Milling spindle taper: ISO 50 Tool shank size: 40 mm x 40 mm Crossrail (vertical travel): 1,000 mm 250 x 4 stages (hydraulic) Rapid traverse X-axis: 10,000 mm/min Rapid traverse 7-axis: 10,000 mm/min Cutting feed rate: 1 ~ 3,000 mm/min Table drive motor: AC 45/55 kW (continuous / 30 min.) Milling spindle drive power ISO 50: 18.5/22 kW (continuous / 30 min.) Control: Fanuc 31i-B Display unit: 15-inch TFT-LCD Tape memory: 1 MB Automatic tool changer: 12 positions (for 5 turning tools + 1 cover + 6 milling tools) Standard tool holders: New 240 TCR-01 (2 pieces) Splash guard: Table version (R-type standard) External coolant system: 3 bar (80 liters/min.) Chip conveyor: hinge-type 4-jaw independent manual chuck Foundation anchor bolts / shims Maintenance tools and toolbox Hydraulic power unit Work area lighting Signal lamp: 3 colors (green, red, yellow) Operating manuals (English): NC 1 CD with Fanuc manuals and 2 books with mechanical/electrical instructions Power supply: 220 V, 60 Hz, 3 phase Machine color: manufacturer standard OPTIONAL ACCESSORIES (#1) Automatic tool changer ATC 24 positions - on request Automatic shutdown for N.C - on request Turning tool holder type 240TCR - on request Through-spindle coolant supply: 30 bar (pump pressure) - on request Transformer 415 V, 50 Hz, 3 phase - on request Linear scales X, Z-axis - on request Rigid tapping - on request Automatic tool changer ATC 24 positions - on request Other notes: INSTALLATION, COMMISSIONING, TRIAL OPERATION AND TRAINING - not included in the price INSURANCE AND FREIGHT - not included in the price Errors in the technical data excepted. The scope of accessories applies only as explicitly described in the article’s text. Any additionally pictured accessories, for example for illustration purposes, are not included in the offer. The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

Condition: new, Ostas 3-Roll Round Bending Machine SMR-S 2070 x 190 Technical Specifications: Special equipment included in the price: Motorized adjustment of the lower rolls Hardened rolls Motorized adjustment of the rear rolls Digital display Sheet metal width 2070 mm Sheet metal thickness 7.0 mm max. Sheet metal thickness for initial bending 6.0 mm Njdjg Nz T Ijpfx Ad Solc Roll length 2070 mm Smallest diameter 285 mm Roll diameter 190 mm Weight 3480 kg Dimensions L-W-H 3750 x 920 x 1260 mm Motor 4 kW Equipment: Top and bottom rolls electrically driven Top roll can be swung out Conical bending device Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable, CE marking

Condition: new, volume flow: 0.984 m³/h, Atlas Copco G7FF 500 lt screw compressor, NEW Specifications: • Condition – new Nlodshkttpopfx Ad Ssc • Manufacturer – Atlas Copco • Capacity – 984 l/min • Main motor power – 7.5 kW • Tank – 500 l • Maximum working pressure – 10.0 atm • Built-in refrigerant dryer • Electronic adjustment of compressor operating parameters • Soundproofed enclosure (only 67 dB) • Complies with CE standards • Operating manual in Polish • Weight – 227 kg Additional information: • Manufacturer’s warranty available after commissioning by an authorized Atlas Copco service center • Available within 7 working days

Condition: used, swing diameter 2000 mm Nsdpfxsy Dvlqo Ad Sjlc turning height 1800 mm Control Siemens Sinumerik 840 Dsl turning speeds range 2,8-315 U/min cross rail adjustment - vertical 1200 mm cross rail adjustment - horizontal +/- 1150 mm 1500 mm bit feeder section 240 x 240 mm Minimum immersion diameter 340 mm cutting capacity 50 kN max. torque on the faceplate 50000 Nm speed range step 1 2,8 - 80 U/min speed range step 2 12 - 315 U/min Max. clamping weight 12000 Kg power capacity faceplate 105 kW weight of the machine ca. 33 t dimensions of the machine ca. 10 x 5 x 6,5 m Further technical data: - Feed range of three-phase servo motors: 1–3000 mm/min; 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/min Features/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyor - Workpiece measurement - Renishaw probe - Coolant tank capacity: approx. 2000 litres - Coolant pump flow rate: 60 litres/min at 2 bar Overhaul: - Extensively overhauled in 2012 by Siemens Industry Munich - Items overhauled included: control system, cabling, motors, measuring systems, etc. - Further information can be found in the PDF

Condition: excellent (used), Rotating graining head Manufacturer: Röhm MK 6 1 head, 60 degrees 1 head, 90 degrees Njdpfjgviq Nsx Ad Solc Overall length: 340 mm Weight: 8.5 kg

Condition: new, weight max. in kg 2500 kg fork length 800 mm stroke height min 85, max 200 mm 155 mm length in width 540 mm Nljdpfx Adjfgyhqj Soc number of wheels 2 vorne, 2 hinten tire equipment PU/Pu fork arm (length x width x thickness) 800 x 155 x 50 mm weight of the machine ca. 0,059 t dimensions 1,15 x 0,54 x 1,21 m SPECIAL PRICE !!! - metered lowering of heavy loads - low maintenance hydraulic unit in steel version - Rounded fork tips for more safety when entering the pallet - Hard chromed piston rod and overload valve - Steering and load rollers ball bearings, for easy running even under load

Condition: used, Year of construction: 1990, turning diameter 2400 mm faceplate diameter 2200 mm turning height 2100 mm control SIEMENS Sinumerik 850T workpiece weight 17 t Tol measurements 32 Werkzeuge Crossbeam travel: 700mm Nljdpjygx D Hsfx Ad Soc Crossbeam support Travel from centre of rotation to the right: 700mm Crossbeam support Travel from centre of rotation to the left: 700mm Machine table drive Main drive power: 80kW Number of gearboxes: 2 Step change: 3.84 Speed range of the 1st gear stage: 2-32-139 rpm Speed range of the 2nd gear stage: 9-125-500 rpm Max. Machine table load: 6 tonnes Feed drive Cross beam support Horizontal feed speed: 0.1 - 8 m/min Cross beam support Vertical feed speed: 0.1 - 8 m/min Cross beam support Rapid traverse speed horizontal/vertical: 8 m/min Cross beam adjustment speed: 425 mm/min Tool system Tool system: 180.1 Cutting force on the turning tool: 30 kN