Used Arburg for sale (313)

Year of construction: 2013, condition: ready for operation (used), Clamping force: 3200kN, screw diameter: 45mm, max. installation height: 800mm, tie bar distance: 720mm, core pulls: 1, control: Selogica, operating hours: 72520h, cycles: approx. 28 million. Documentation available. An on-site inspection is possible. Gkodpexfvhlsfx Afijc

Condition: used, Year of construction: 1999, Arburg 570 C 2000-675 Gkedpfx Afjxd U Tqsiec Year of manufacture: 1999 Clamping force: 2000 kN Distance between tie bars: 570 x 570 mm Mould mounting platens (W x H): 795 x 795 mm Screw diameter: 60 mm Machine is in operation, delivery by arrangement Location: Budapest, Hungary Price: 15,000 EUR For more details and photos, please contact us. Injection Moulds for Sale: - Planter pot 14 cm, 16 cm, 25 cm + base + hanger (7 moulds): 2,000 EUR - Chain planter pot 20 cm (4 moulds): 2,000 EUR - Flower pot with ribs (1 mould): 200 EUR - Hose connector (2 moulds) - Towel holder (3 moulds): 2,000 EUR - Toy bucket + handle + shovel + rake: 1,000 EUR - Corner shelf (2 moulds): 4,000 EUR Writing Tools Set: 1. 10 cm ruler, 4 embossing dies (1 mould) 2. 16 cm ruler, 4 embossing dies (1 mould) 3. 20 cm ruler, 2 embossing dies (1 mould) 4. 30 cm ruler, 2 embossing dies (2 moulds) 5. 40 cm ruler, 2 embossing dies (1 mould) 6. 50 cm ruler, 2 embossing dies (1 mould) 7. Protractor – Standard protractor (1 mould) 8. Mini protractor, 45° & 60°, 10 cm (1 mould) 9. Protractor, 45° (2 moulds) 10. Protractor, 60° (2 moulds) 11. Angle gauge, 180°, 2 embossing dies (1 mould) 12. Angle gauge, 360° (1 mould) 13. Stamping machine for 300-size stamps (1 mould) 14. Stamp illuminator, new, for 300-size 15. Stamp pads (for rulers) Total: 15 moulds + stamping equipment: 5,000 EUR

Condition: used, Year of construction: 2001, operating hours: 57,430 h, functionality: fully functional, machine/vehicle number: 183899, clamping force: 600 kN, overall weight: 2,330 kg, Arburg injection moulding machine for sale Year of manufacture: 2001 Condition: Very well maintained, regularly and promptly serviced Inspection: Was in operation until recently, currently still connected to power and available for on-site inspection at any time Ready for use: Immediately available and fully functional The machine is in very good condition and is ready for immediate use. The machine is sold without tooling and conveyor. Gsdpfx Afsxdz I Ueijkc More details on request.

Condition: good (used), Year of construction: 2009, Ref. no.: 18585 Hersteller: ARBURG Type: 370 A 500-170 Electric machines Year of construction: 2009 Godpfoxdxn Sjx Afiskc Clamping unit Clamping force: 50 ton Opening stroke: 300 mm Distance between tie bars: 370 x 370 mm Mould height min.: 200 mm Mould height max.: 400 mm Platen size (h x v): 510 x510 mm Injection unit Screw diameter: 25 mm Injection volume: 59 cm³ Shot weight: 54 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,9 x 2,0 x 1,5 m Machine weight: 3470 kg

Year of construction: 2020, condition: ready for operation (used), General Data Machine weight 28400 kg Additional Equipment The robot + auto line are not included. These PIOVAN accessories are included: Piovan Hot Air Dryer G35 / Piovan Suction Unit PF30 / 3x Piovan Temp Unit THW118-F (+1x brand new unused temperature unit) Gedpexb E I Tjfx Afiekc This Arburg Allrounder 920H 5000-4600 was manufactured in 2020. A robust plastic processing machine featuring a clamping force of 5000 kN and an injection unit of 4600. It has a significant opening stroke of 900 mm and mold platens size of 1280 x 1280 mm. Consider the opportunity to buy this Arburg Allrounder 920H 5000-4600 plastic processing machine. Contact us for more information about this machine. Application Types Injection Moulding

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Shuttle table Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Gkodpfx Afsvl Skasijc Shot weight: 31 g Injection pressure: 2000 bar Working hours: 7397 h

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 194573, clamping force: 1,000 kN, Here we offer a maintained injection molding machine. Arburg 2-color injection molding machine horizontal vertical Aggregate Masch.Nr : will be informed on request Arburg 420C 1000-150/150 year of construction: 2004 Control : Selogica Gkedpfshyumgjx Afioc Extras: 2X core pull (conc. travel, holding pressure adjustable) Intermediate stop for hydraulic rotary control CF card drive Interface master computer Interface dyeing unit Interface conveyor belt Machine prepared for Multilift Selecting unit w. connection installation height extended to 350 mm high wear resistant screws connection blow-out unit 2-color /horiz.vert. unit incl. diskettes/CF cards - complete documents/manuals closing force: 100 tons/1000 kN tie bar distance 420 x 420 mm WKZG plates: 570 x 570 mm opening stroke 500 mm max. dist. plates 850 mm height of tooling: 350 mm 1.injection unit (150 er) screw: 30 mm (highly wear resistant) Injection weight: 65 gr. Injection volume: 78 ccm Injection pressure: 2210 bar 2.injection unit (150 er) Screw: 25 mm (highly wear resistant) Injection weight: 45 gr. Injection volume: 54 ccm Injection pressure: 2500 bar Weight/Dimension Dimension: 4,63 x 1,3 x 3,9 mtr. (LXBXH) Weight: 4.000 kg connected load: 125 A pre-fuse free delivery to buyer's yard - buyer unloads at his own risk from truck bed. the machine is offered functionally tested the machine is in our exclusive property.

Condition: good (used), Year of construction: 2000, 1x used Arburg 570C 2000-350 Year of manufacture: 2000 Screw: 45mm Gkodpfx Ajxc Eqqefijc Core pulls: 1x Hot runner: 6x incl. conveyor belt

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 40 mm, clearance between the columns: 630 mm, displacement volume: 201 cm³, injection pressure: 2,000 bar, total length: 7,050 mm, total width: 2,050 mm, total height: 2,350 mm, overall weight: 13,050 kg, Equipment: documentation/manual, warehouse no.: 503584 manufacturer: ARBURG type: Allrounder 630 H 2500-400 controller: Selogica year of construction: 2019 clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 900 mm min. mould height: 300 mm max. mould height: 750 mm max. open daylight: 1300 mm opening stroke: 550 mm screw diameter: 40 mm swept volume: 201 ccm injection pressure: 2000 bar equipment included Gsdpfx Aoxakxnsfijkc screen text german CEE-socket 16A machine incl. Handling machine incl. water flow regulator machine without material hopper machine without safety fencing Anti vibration mounts interface for handling interface OPC Schuko-socket 10A measures of machine (without robot) l x w x h: 7.05m x 2.05m x 2.35m total weight: 13050KG technical data robot-system handling type: Linear manufacture: ARBURG controller: Multilift V 15 year of construction: 2019 handling weight: 15 kg total weight: 500 kg

Condition: good (used), Year of construction: 2007, Ref. no.: 18579 Hersteller: ARBURG Type: 270 C 400 - 70 GOLDEN EDITION Year of construction: 2007 Gkjdpfxoxdxn Ej Afijc Clamping unit Clamping force: 40 ton Opening stroke: 200 mm Distance between tie bars: 270 x 270 mm Opening width: 550 mm Platen size (h x v): 446 x 446 mm Injection unit Screw diameter: 22 mm Injection volume: 34 cm³ Shot weight: 31 g Injection pressure: 2000 bar Measurements and weight Dimensions: 3,2 X 1,5 X 1,9 m Machine weight: 2150 kg Robot Producer: Wittmann Type: W711

Condition: excellent (used), Year of construction: 2010, operating hours: 45,221 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 30 mm, injection weight: 77 g, Arburg Allrounder 470H incl. removal device and safety enclosure 2x conveyor belt 1x automatic box changer Operating hours pump: 45,221 h Gkjdewu H U Repfx Afisc Operating hours automation: 41,601 h Operating hours robot system: 12,276 h

Condition: like new (used), Year of construction: 2017, Vertical Arburg Schiebetisch 375 V 500-100 (2017, working hours: 19.719) Clamping unit: 50 ton Oppening stroke (max. kN/mm) : 30 / 250 Mould height (fixed/variable) min.-max. mm: ---/172/272 Platen daylight (fixed/variable) max. mm: ---/422-522 Shuttle table stroke: 650 mm Screw diameter: 20 mm Injection volume: 31 cm3 Shot weight: 29 g Injection pressure: 2.500 bar Working hours: 19.719 Gkjdpfsu Ep Imjx Afioc Equipment: 3x hot runner 1x hydraulic core puller 1x pneumatic core puller

Condition: excellent (used), Year of construction: 2013, operating hours: 42,160 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 2 bar, injection weight: 184 g, overall weight: 11,200 kg, Here, as a dealer specializing in injection moulding machinery, we are offering the following well-maintained used injection moulding machine: Naturally, we also purchase well-maintained injection moulding machines from model year 2010 onward. We have been a leading wholesaler of used injection moulding machines for over 25 years. Important notice – Tax advantage for used machines: From 01.07.2025, used machines can also benefit from a special depreciation scheme of 30% annually. In addition to the lower purchase price compared to new machinery, you can utilize the same depreciation allowances as with new machines (see: 'Growth Booster', (§ 7 paragraph 2 EStG-E)). Offered Machine: Arburg 1500T 2000-400 Vertical Rotary Table Machine Machine No. 225999 A full list of equipment is available in the downloadable documents (machine card). Control: Selogica Year of manufacture: 2013 • Total machine cycles: only 1,907,296 • Automatic operation hours: 42,160 Clamping Unit • Distance between platens: 700 mm • Clamping force: 200 t / 2000 kN • Mould installation height: 400 mm • Table diameter: 1500 mm • Rotary angle: 180° • Rotation time: 2.4 s min. • Maximum weight on rotary table: 1,050 kg • Ejector force: 45 kN / 175 mm stroke Injection Unit • Screw diameter: 40 mm • Shot volume: 201 ccm • Injection weight: 184 g • Injection pressure: 2,000 bar Extras • 2-station rotary table, 180° forward/reverse alternating operation with servo-electric rotary drive and hydraulic locking pin for fine-centering of the rotary plate in end position; separating guard between clamping and loading areas, the height on the rotary plate adjustable to suit the mould bases, with media lines and connections for the mould bases • Rotary table diameter: 1500 mm • Max. clamping force: 2000 kN Gkjdpfouuf Iaex Afioc • Injection unit according to EUROMAP 400 • Screw diameter: 40 mm • Special ergonomic rotary table version with the following features: - Corrosion protection treatment for rotary table (VE 574/90) - Water connections: 2 circuits - 3 hydraulic connections for needle shut-off system - 3 core pulls - Per station: one core pull and 2 x tempering - 6 x mould temperature control - 12 control zones for mould heating circuits - 2 x Kistler cavity pressure sensors - Temperature monitoring for start-up components • Weight: 11,200 kg • Power: 22 kW motor – heating power 9.4 kW (5 zones) – connected load 100 A The machine is offered fully tested for functionality, fully operational with a start-up guarantee – tested before dismantling. About our company and offered machines: - We only sell our own machines purchased from current production, from our warehouse in Hannover. - All offered machines are tested before dismantling. - We DO NOT deal with insolvency goods – we are NOT brokers trading in third-party property. - All machines stem from successful businesses with a proven maintenance and servicing record. - All listed machines can be inspected at our warehouse.

Condition: excellent (used), Year of construction: 2001, operating hours: 23,400 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: ARBURG Typ: 420C1000-250 Baujahr: 2001 Schließkraft: 100 Tonnen Holmabstand 420 x 420 mm Schnecken DN: 40 mm Dosiervolumen: 188 ccm³ Spritzteilgewicht 172 g/PS Steuerung: SELGOCIA Gedpfx Afew U Ebbjiokc Ausstattung: -Angußpicker, Hersteller: GEIGER

Condition: excellent (used), functionality: fully functional, Control panel taken from a working Arburg 420C 1000-350 machine. Gkjdpfjt Dyl Ssx Afijc +F00 SN 158.719A

Condition: good (used), Year of construction: 2013, Ref. no.: 18577 Hersteller: ARBURG Type: 520 A 1300 - 400 ALL DRIVE Electric machines Year of construction: 2013 Clamping unit Clamping force: 130 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Mould height min.: 250 mm Mould height max.: 550 mm Platen size (h x v): 695 x 695 mm Gedjxdxnxspfx Afiskc Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 115 g Injection pressure: 2500 bar Measurements and weight Dimensions: 5,8 x 1,7 x 2,3 m Machine weight: 7100 kg

Condition: like new (used), Year of construction: 2021, operating hours: 121 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 40 mm, clearance between the columns: 520 mm, injection pressure: 2,500 bar, plate length: 695 mm, plate width: 695 mm, power: 49.5 kW (67.30 HP), type of input current: three-phase, Equipment: documentation/manual, Arburg Allrounder 520 E 1500-400 Golden Electric Machine as new. Very little used, only for sample production. Machine is fully equipped: 40 mm screw Gedoxbpbkjpfx Afiokc High wear resistant cylinder 2nd core pull control for sequential movements – holding pressure via check valve 4 free water manifold circuits with optical flow indicator Conveyor belt – electric 6 electric heating control circuits for mold temperature control Full documentation available. Complete specification list available by email upon request.

Condition: excellent (used), Year of construction: 2003, operating hours: 20,092 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 20092 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 Gedpfx Asgrzh Esfijkc 1 Position-controlled screw for the third injection

Condition: good (used), Year of construction: 2010, Ref. no.: 18574 Hersteller: ARBURG Type: 520 H 1500-800 Year of construction: 2010 Clamping unit Clamping force: 150 ton Opening stroke: 450 mm Distance between tie bars: 520 x 520 mm Gkedpfx Aoxdxnrofiec Mould height min.: 250 mm Mould height max.: 700 mm Platen size (h x v): 695 x 695 mm Injection unit Screw diameter: 45 mm Injection volume: 315 cm³ Shot weight: 291 g Injection pressure: 2470 bar Measurements and weight Dimensions: 5,1 x 1,7 x 2,3 m Machine weight: 7900 kg Additional information & extras Accumulator: 1 pcs Robot Producer: Arburg Type: Multilift

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 199107, Here we offer a maintained injection molding machine. Manufacturer: Arburg Type: 720S 3200-2100 Control unit: Selogica Year of manufacture: 2005 Special feature/Condition Gkodpfxjlc R Rxe Afiec Pump was changed new hydraulic motor in 2019 injection unit sealed in 2019 constant maintenance by the manufacturer and previous owner Extras 2 x core pull robot interface machine data sheet is available on request - complete documentation and software available - German language - from first owner - origin Germany clamping unit clamping force: 3200 kN /320 to. tie bar distance: 720 x 720 mm platen size h: 1040 mm x 1040 mm Installation height min.: 300 mm Installation height max.: 700 mm platen distance max.: 1400 mm opening stroke: 700 mm ejector stroke: 250 mm Ejector force: 100 kN centering moving platen D: 165 mm centering fixed platen D: 165 mm mold weight: 3600 kg Injection unit screw diameter: 70 mm injection weight in polysterol: 984 g/PS available immediately from our warehouse in Hanover/German or free domicile against freight reimbursement the machine is offered functionally tested the machine is in our sole ownership the requested machine is available immediately in our warehouse Hannover and is offered functionally tested and can be inspected under power.

Condition: good (used), Year of construction: 2001, Ref. no.: 18404 Hersteller: ARBURG Type: 420C-1300-350 Year of construction: 2001 Clamping unit Clamping force: 130 ton Opening stroke: 500 mm Gjdpfx Aewm I A Tsfijkc Distance between tie bars: 420 x420 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 605 x 605 mm Injection unit Screw diameter: 45 mm Injection volume: 230 cm³ Shot weight: 210 g Injection pressure: 1670 bar Measurements and weight Dimensions: 4,68 x 1,3 x 2,2 m Machine weight: 4080 kg Additional information & extras Core pull: 1 pcs

Condition: excellent (used), Year of construction: 2011, operating hours: 61,134 h, functionality: fully functional, screw diameter: 18 mm, clearance between the columns: 270 mm, displacement volume: 23 cm³, injection pressure: 2,500 bar, injection weight: 21 g, Equipment: documentation/manual, Here, as a specialist dealer for injection moulding machines, we are offering the following well-maintained used injection moulding machine: Gjdpow Apl Usfx Afiekc Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control Unit: Selogica Year of Manufacture: 2011 Operating Hours: 61,134 h Machine Number: 215701 Extras: - Robot interface - High-wear resistant screw - CF drive - Complete documentation and software (on CF card) - Parts separator - German language interface - Single previous owner – country of origin: Germany Regular maintenance by manufacturer and previous owner Clamping Unit Clamping force: 400 kN / 40 t Tie bar spacing: 270 x 270 mm Platen size: 446 x 446 mm Max. opening stroke: 350 mm Min. mould height: 200 mm Max. daylight between plates: 550 mm Ejector stroke: 125 mm Max. ejector force: 30 kN Injection Unit Screw diameter: 18 mm Injection volume: 23 cm³ Shot weight: 21 g Injection pressure: 2,500 bar Electrical Pump motor: 11 kW Heater: 4 zones, 4 kW Installed power: 15 kW Main fuse: 50A Weight: 2,150 kg Warranty Warranty up to initial commissioning. Loading/Shipping Free loading onto buyer's truck, or free delivery within Germany (shipping costs apply), ex stock Hanover, Germany. Available immediately. Company and machine information: - We only sell machines purchased from ongoing production out of our own inventory in Hanover. - All machines offered are inspected and tested prior to removal. - We do NOT deal in insolvency assets – we are NOT intermediaries dealing with third-party property. - All machines offered come from successful companies where maintenance and care are standard practice. - All machines offered are available for inspection at our warehouse.

Condition: good (used), Year of construction: 2003, Ref. no.: 18330 Hersteller: ARBURG Type: 320 S 500-60 /60 with turntable Year of construction: 2003 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 320 X 320 mm Mould height min.: 225 mm Mould height max.: 575 mm Gsdpfxswm I Aas Afiskc Platen size (h x v): 446 X 446 mm Injection unit Screw diameter: 25 + 15 mm Injection volume: 39 + 20 cm³ Shot weight: 35 + 18 g Injection pressure: 2210 bar Measurements and weight Dimensions: 3,5 X 1,2 x 1,9 m Machine weight: 2250 kg

Condition: excellent (used), Year of construction: 2007, operating hours: 53,000 h, functionality: fully functional, machine/vehicle number: 206432, Equipment: documentation/manual, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current note – Tax notice and advantage for used machines: As of 01.07.2025, used machines will also be eligible for a special depreciation of 30% annually for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Functional condition: Fully operational Condition: Very well-maintained – German origin Extras: - Thermoplastic cylinder complete, 50 mm, highly wear-resistant - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip 50 mm extended - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping platen set 570, center Ø 125 mm - 2-piece air blast device with pressure regulator - Air blast device connection 1 - Selector unit connection - Core puller 1 for serial motion holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (per EUROMAP 67), 50-pin - ARBURG host computer interface - Additional socket distributor: 1x CEE, 1x Schuko - Serial printer interface USB - CompactFlash interface for data set storage - Operation authorization with chip card per EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Dosing unit interface - Free cooling circuits, manually adjustable - Machine-specific cooling circuits controlled - Extended monitoring package - Extended motion package - Production control package - Optimization / operator assistance package - Quality assurance package - Documentation package Complete documentation included. Injection unit: Screw diameter: 50 mm Shot weight: 359 g/PS Injection pressure: 2000 bar Shot volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie bar spacing: 570 x 570 mm Mounting plates: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is available for immediate delivery at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty until initial commissioning. Loading/shipping: Free loading onto the buyer's truck or free delivery within Germany (freight charge applies) Available from our warehouse in Hannover, Germany. For your information regarding our machines and company: - We sell only our own machines purchased from ongoing production at our Hannover warehouse. - All listed machines are inspected and tested prior to removal. - We do NOT sell insolvency assets – we are NOT brokers handling third party property. Gkodpfx Afow Tt R Ioiec - All offered machines come from successful businesses where proper maintenance is standard practice. - All machines offered are available for viewing at our warehouse.

Condition: excellent (used), Year of construction: 2017, operating hours: 22,259 h, functionality: fully functional, machine/vehicle number: 235958, clamping force: 2,200 kN, Equipment: documentation/manual, Here we offer, as a dealer in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Update – Tax Notice and Advantage for Used Machines Starting from July 1, 2025, used machinery will also be eligible for a special depreciation allowance of 30% per year. In addition to the lower price compared to new machines, you can claim the same depreciation amounts as for a new machine (Keyword: “Growth Booster,” § 7 section 2 EstG-E). Manufacturer: Arburg Model: 570S 2200/400-170 2-K with rotary table Control system: Selogica Year of manufacture: 2017 Operating hours: 22,259 h Machine number: 235958 Special Features/Maintenance Condition: Regular maintenance by the manufacturer and previous owner Documentation: Included documents: -- Original purchase invoice with additional items - Machine data sheet - Rotary table drawing Extras: - Hydraulic rotary table with 4 cooling circuits - 3 x core pulls - Hydraulic accumulator for rapid movement - Opening stroke increased to 450 mm / installation height adjustable from 250 to 450 mm - High wear-resistant screw and cylinder units Gkodjw Tt Erspfx Afisc - Servo-regulated screw - Injection pressure increased to 2,500 bar - 2x air blow-off - Hold pressure switching - 15 electrical heating zones each of 2 kW - 2x needle shut-off nozzle - Colour dosing interface - High-performance cooler Machine data sheet available upon request. - Complete documentation and software included - German language - First delivery in Germany Clamping unit: Clamping force: 2,200 kN / 220 t Tie bar distance: 570 x 570 mm Platen size h: 795 mm x 795 mm Min. installation height: 250 mm (can be increased to 450 mm) Max. daylight: 900 mm Opening stroke: 650 mm (currently 450 mm due to increased installation height) Ejector stroke: 250 mm Ejector force: 100 kN Movable platen centering D: 125 mm Mold weight: kg Injection unit 1 (400 series): Screw diameter: 40 mm Shot weight in polystyrene: 184 g/PS Shot volume: 201 ccm Injection pressure: 2,500 bar High-wear resistant Injection unit 2 (170 series): Screw diameter: 35 mm Shot weight in polystyrene: 77 g/PS Shot volume: 85 ccm Injection pressure: 2,500 bar High-wear resistant Motor: 45 kW Heating: 9.7 kW / 5 zones Weight: 9,800 kg Available immediately ex-stock Hannover/Germany or delivered free to destination against reimbursement of freight costs. The machine is offered function-tested. It is our sole property. The requested machine is available immediately ex our Hannover warehouse, is offered in function-tested condition and can be inspected under power. For your information regarding the machines we offer and our company: - We only sell our own machines acquired from active production, ex-stock Hannover. - All machines are inspected and tested before dismantling. - We do NOT sell insolvency goods. We are NOT a broker trading in third-party assets. - All offered machines come from successful companies where maintenance and care are a matter of course. - All machines offered can be inspected at our warehouse.