Used 5 Head Moulder for sale (63,975)

Condition: used, Circle cutter MK 5 from 50 - 200 mm in diameter Hodpfx Aecxqbgehvsni

Year of construction: 1996, condition: good (used), PTW 150 Complete orbital tube welding machine with two complete and fully overhauled welding heads, (and 2 extra fully operational welding heads, respectively for up to 2" and 4") (see pictures) for sale. It includes "collets" (clamping sleeves) for most pipe dimensions from ½" to 4". This equipment is one of 5 orbital welding machines I have had, and it has mainly been used on 54x2mm, in addition to building 5-6 central gas systems with tubes of 12-18 and 28mm, and some 88.9mm. The equipment is complete, ready to weld with cables, gas hoses, red. valve etc. The equipment is delivered in original transport boxes, has complete set of manuals/part lists. Buyers can have the equipment delivered to their door, and up to 1 week of free training (including with many years of experience!) anywhere in Europe! New orbital equipment with the same spec, would cost typical some €40k + with just ONE weldhead. (One enclosed weldhead is typical €12-13000 without collets, typical €300 /dimension you will weld) At the two plants in Norway that operated with nuclear power (Kjeller and Halden), the same type of welding machine was the only one that was able to weld according to the requirements they set! (like 100% Helium, - 200 bar, - vaccum etc) The user interface is simpler on newer machines, but if you can calculate the circumference of a tube, you are well off. If you are wondering if orbital welding is something for you, it involves very little risk when you can get complete equipment, delivered on your door step, welding program for all pipe dimensions from ½" to 4" and one week of training for €10k, (and in addition 3 decades of experience) Hnsdpfx Aheycwk Rsvji

Condition: refurbished (used), battery capacity: 500 Ah, battery voltage: 80 V, total height: 742 mm, total length: 1,027 mm, total width: 852 mm, Tested forklift battery for your forklift - 80V 4PZS 500Ah - special tray + 1 year warranty + incl. aquamatic system + incl. end conductor & REMA 320 connector (other connectors can be installed upon request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of delivery: 2024 Dimensions: Length: 1,027 mm Width: 852 mm Height: 742 mm Hsdjwzvzgjpfx Ahvsni Weight: approx. 1,580 kg Suitable for the following models and others: Daewoo B30 X-5 Common battery sizes available, inquiries welcome. Transport available.

Condition: used, Grant Aqua 5 Water BathThe Grant Sub Aqua 5 Plus is a digital, unstirred water bath designed for precise temperature control in laboratory applications. It is part of the SUB Aqua Pro series, known for its high-quality construction and reliability.​ Key Specifications Temperature Range: +5°C to 99°C Temperature Stability: ±0.2°C Capacity: 5 liters Internal Dimensions: 281 x 131 x 132 mm Hjdpfsxv Ayvsx Ahvjni External Dimensions: 335 x 215 x 200 mm Heating Power: 0.35 kW Material: High-grade stainless steel tank Display: Digital with PID control for quick heat-up and precision Additional Features: Three programmable temperature presets Countdown timer with audible buzzer Front panel lock-out User-settable sample protection and fixed thermal cut-out Gable polycarbonate lid included​ This model is suitable for applications requiring stable and precise temperature control, such as sample incubation, enzyme reactions, and media preparation.

Condition: used, This listing is for the Watson Marlow 313DW Peristaltic Pump Head The unit is in full working condition and is ready for immediate release Key Features The Watson-Marlow 313DW is a single-channel, rapid-load peristaltic pump head designed for laboratory and industrial fluid handling applications. It is part of the 300 Series, known for their flip-top design that facilitates quick and easy tubing changes. Key Features High Flow Rate: The 313DW model is equipped with a three-roller mechanism, enabling a maximum flow rate of up to 2,000 mL/min when using 1.6 mm wall thickness tubing. Tubing Compatibility: Accepts standard 1.6 mm wall thickness tubing with bore sizes ranging from 0.5 mm to 8 mm, offering flexibility for various applications. Durable Construction: The pump head is built with a glass-filled polypropylene back; IXEF front; glass-filled nylon rotor, clamps, and mounting plate; and MoS₂-filled nylon rollers. These materials ensure strength, chemical resistance, and long service life. Roller Options: Choose the three-roller model for high-flow applications or the four-roller model for smoother flow and reduced pulsation. Extension Capability: Add up to five extension pump heads, depending on the type and size of tubing used. Note: The number of extension pump heads allowed depends on the type and size of tubing being used. Warranty: Includes a 1-year manufacturer warranty for quality assurance. Applications Chemical Processing: Ideal for accurate, contamination-free chemical transfer. Hnodpfxsxv Apwo Ahvsi Biotechnology: Suitable for sterile fluid handling. Food and Beverage: For transferring additives, colorants, and ingredients. Water Treatment: Used in dosing and chemical feed systems

Condition: new, Year of construction: 2025, functionality: fully functional, Chipper heads for chipper canter sawmachine R200, 250 Hjdpfx Aox I Skdehvjni

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,792 h, load capacity: 4,000 kg, lifting height: 5,650 mm, load center: 500 mm, fuel type: gas, DGUV certified until: 11/2025, fork length: 1,600 mm, tire condition: 95 %, empty load weight: 7,183 kg, color: yellow, We are offering an absolutely top-condition forklift from Jungheinrich. In 2021, it underwent a complete 5-star refurbishment by Jungheinrich and has only run 45 hours since the overhaul. The paintwork is 100% original—there has been no respray or touch-up! The forklift has always been stored indoors and is in excellent condition. Maintenance and UVV inspection are up to date. The manual and keys are, of course, included. Last major service: October 2024 UVV valid until 10/2025 Operating hours: 7,792 (since refurbishment: 7,744) Model: TFG 540s SP G+E 120-565 DZ Type: LPG forklift Year of manufacture: 2012 / 5-star complete refurbishment 03/2021, equipped with Kaup fork positioner T466 Hnedpfew N Iz Hex Ahvoi Lifting capacity: 4,000 kg Lifting height: 5,650 mm Overall height: 2,640 mm Fork length: 1,600 mm Load center: 500 mm Mast: triplex with free lift Equipment: Solo-Pilot, road lighting (conforming to StVZO), LED version with 2 working lights front and rear each, front, cab roof, and rear windows Steel doors, leather seat, rear-view mirror, armrest, double auxiliary hydraulics (2 functions) Brand new Kaup fork positioner 4.8T 466B Since refurbishment, the truck has only accumulated 45 hours of operation, with all UVV and maintenance work carried out accordingly.

Condition: new, Vertical stainless steel storage tank, diameter 2,5 m height 6m with 4 legs, manhole, agitator, 10,6 kW motor, air filter... Hnodpfx Aoik Hd Iohvei

Condition: new, Year of construction: 2025, IF-100 moulder infeed (100 m/min). Max length 6m. The flat chain feeder transports parts across to the fence. The part next to the fence is detected by a light beam and the the first roller is raised to allow entry and then pushes the workpiece under the feed rollers of the planer. The first feed roller of the planer needs to be freewheeling roller to allow correct operation of the infeed. OF-100 moulder outfeed. Automatic deposit on a belt conveyor and cross infeed. Manual destacking Approx. floor space requirement: length 8m, width 2,5m . Suitable for max 100m/min feed speed. Hodsxhfycjpfx Ahvoni

Condition: good (used), Year of construction: 2007, functionality: fully functional, 1 JOBS LINX DESIGN gantry milling machine from 2007 CNC FIDIA C20 – Siemens linear motors – feed rate 50 m/min X 7200 Y 3200 Z 2000 TABLE 6000 X 2500 AUTOMATIC HEAD AXIS A-C A 200° (+- 100°) B 400° (+- 200°) SPINDLE SPEED 24,000 RPM HSK 63 – 27kW – cooling system Hnedpfoxtp Hwex Ahvei ATC 20 tools WEIGHT 52T

Condition: used, diameter div. Hjdpfx Aoww Nb Eshveni number 36x tool adaptor BT 40

Condition: excellent (used), Merand Baguette Machine in good working condition Hsdpjkzh Ehofx Ahveni

Condition: like new (used), Globe Baguette machine in good working condition for more information please sent a request Hnodpfxoumn Duj Ahvsi

Condition: used, Drilling capacity: 35/40 mm Spindle mount: MK 4 throat: 230 mm Hjdpfjb N Ahljx Ahvsni Table size: 1050 x 625 mm Table height above floor: 560 mm small / large distance between table and drilling sleeve: 549/960 mm quill stroke: 170 mm spindle speed infinitely variable: 50 - 800 rpm space requirement: 1050 x 1000 x 2170 mm Weight: 250 kg

Condition: excellent (used), Year of construction: 2010, Ref:10684 . 2010 MULLER MARTINI HK75 (pair) Ref:10687 . 2005 MULLER MARTINI HK75 (pair) Ref:10686 . 2005 MULLER MARTINI HK75 (pair) Ref:10682 . 2010 MULLER MARTINI HK45 NARROW (single) Ref:10680 . 2005 MULLER MARTINI HK45 NARROW (pair) Ref:10678 . 2002 MULLER MARTINI 0249 LOOP (pair) Hedet Dpqqepfx Ahvjni Ref:10677 . 2005 MULLER MARTINI 0249 LOOP (pair) Ref:10676 . 2005 MULLER MARTINI 0249 LOOP (pair) Ref:10675 . 2005 MULLER MARTINI 0249 LOOP (pair) Ref:10673 . 2010 MULLER MARTINI 0249 LOOP (pair) Ref:10674 . 2010 MULLER MARTINI 0249 LOOP (single) Ref:10679 . 2005 MULLER MARTINI HK45 NARROW (pair) Ref:10683 . 2010 MULLER MARTINI HK75 (pair) Ref:10685 . 2010 MULLER MARTINI HK75Q (single) Ref:10681 . 2005 MULLER MARTINI HK45 NARROW (single)

Condition: used, Moulder IDC000075 Hnodetwy T Ropfx Ahvei - manufacturer: Wadkin - model: GA 220 - 4 years ago made renovation

Year of construction: 2005, condition: as good as new (ex-display), ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery cover customer Startup type negotiated Description Notes Hjdpsb Rnv Sofx Ahvoni Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range +5°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range +5°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Hjdevz U Erepfx Ahvoni Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: FI-50-RAY-OF, shaft length: 200 mm, input voltage: 230 V, type of input current: DC, laser power: 50 W, type of cooling: air, working range: 200 mm, overall weight: 46 kg, warranty duration: 36 months, input frequency: 100 Hz, Available immediately! Buy now and benefit! Seize the opportunity and secure the 50 Watt Raycus QB. For further information or an individual offer, please do not hesitate to contact us. Contact us today and find out more about the benefits of this outstanding product. We offer you a brand new 50 watt Raycus fiber laser with German user software and operating instructions. This device is very easy to operate without any programming knowledge and is ready for immediate use. Our services: Personal delivery and installation Setup and instruction on site or via remote connection Ongoing support for questions or problems Service and spare parts directly from Germany Technical details: Laser power: 50 Watt Raycus Wavelength: 1064 nm Marking field size: 200x200 mm (options: 50, 70, 110, 150, 250, 300 mm head) Repeat accuracy: ± 0.003 mm Engraving speed: ≤ 7000 mm/s Marking software: EZCAD in German / English Pilot laser: simple preview Laser class: 4 Working temperature range: 14-30 ℃ Focusing: manual Max. Component height: approx. 350 mm Connection: 230V Cooling: air-cooled Weight: approx. 50 kg Operating costs: low Service life: over 100,000 operating hours maintenance-free Equipment: Grid holes for fixtures Variety of materials: Marking of a wide range of materials Hodpfx Ahou Hrf Djveni Included: Head 200x200 mm, other sizes available CE declaration of conformity guarantee service German software Training for machines and programs Invoice Scope of delivery: USB cable power cable Stops USB stick with parameters Operating instructions in German Monitor holder Foot pedal Safety goggles Applications: Perfectly suited for text, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets and image engraving. This laser is ideal for engraving and tempering metals as well as marking or decorating plastics and coated materials. Software: EZCad 2.14.0 in German Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We carry out the service ourselves and have the largest spare parts in stock right here in Germany to guarantee you fast and efficient support. Shipping and installation: With shipping, we connect the machine to you remotely, set it up and give you brief instructions. Alternatively, we deliver it in person, install it, set it up and instruct you. The price is agreed depending on the zip code. Consultation: For detailed advice, visit our website or call us directly. We will be happy to answer all your questions.

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Hnodsp U Umkopfx Ahvei

Condition: excellent (used), Year of construction: 2020, The Armor HV horizontal moulder includes all the features of the Armor Tradition model, but also is reinforced to keep higher daily rates. The included Tradition Pack will allow you to limit the degassing of your dough. Up to 1 800 pieces/h. Dough pieces from 50g to 2000g. Retactable belt. Hodpfowt Tnhjx Ahvsni Belt dimensions 700mm W x 29mm L

Condition: new, Year of construction: 2025, machine/vehicle number: EAN0729389556525, total length: 82,200 mm, shelf height: 5,000 mm, support length: 3,300 mm, shelf length: 13,700 mm, frame height: 5,000 mm, load per truss pair (max.): 3,250 kg, frame width: 1,100 mm, number of shelf rows: 6, 2 single-row pallet racks + 2 double-row pallet racks (8 x M50113313-4), each 13.7 m long, 5 m high, 1.1 m deep, each with 4 bays, 3.3 m wide, each with 3 beam levels, compartment load capacity 3250 kg. - 30 frames (RM5011 - RAL5019) - 80 base plates, shimming material, bolt set - 20 spacers/connectors for double rows (ZAbh20) - 120 floor anchors (ZZBA1210) Hodjv Uq Dkepfx Ahveni - 144 single beams (T33135 - RAL2008) - 0 collision/ramp protection barriers (ZRS40901) - 6 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Freight / Delivery: - up to 20 working days after receipt of payment - free delivery to building site / assembly location - unloading from truck to be carried out by buyer using own lifting equipment - Deliveries are made to the entire territory of the Federal Republic of Germany, except islands! Deliveries to EU countries by individual agreement only.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 18i MB5, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 500 mm Travel Z-axis: 550 mm Main Spindle Type: HSK-A63 Max. speed: 20,000 rpm Turning Spindle Collet Chuck: Hainbuch SK65 BZI Max. speed: 4,000 rpm Bar capacity: approx. 65 mm MACHINE DETAILS Control: Fanuc 18i MB5 Drive power min.: 30 kVA Drive power max.: 50 kVA EQUIPMENT Tool measuring system: Blum Laser Control NT Additional magazine (92 tool stations) Coolant system / Paper band filter / High-pressure internal coolant supply (IKZ) Spindle chiller Bar feeder: Breuning RBK 10012 Inserts: 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, Max. diameter: 60 mm Please note: No oil mist extraction, no CO2 extinguishing system included. Machine disassembly will be carried out by Chiron on 24.03.2026. Chiron will also perform a data backup. Hnsdpfx Ahjyn Ncpevji

Condition: not inspected (used), Year of construction: 2010, functionality: unexamined, workpiece height (max.): 120 mm, workpiece width (max.): 230 mm, controller model: Siemens Simatic Panel Touch, workpiece length (max.): 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed speed: 12 m/min Rubber-coated feed rollers: 1 Toothed feed rollers: 4 Total number of rollers: 5 MACHINE DETAILS Control system: Siemens Simatic Panel Touch Processing unit 1 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 2 Motor power: 4 kW Shank diameter: 40 mm Hnedpsyqx T Aefx Ahvei Shank length: 240 mm Max. tool diameter: 4 mm Processing unit 3 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 4 Motor power: 5.5 kW Shank diameter: 40 mm Shank length: 240 mm Automatic chip ejection power: 24 kW EQUIPMENT Safety standard: EC marking The machine is sold and delivered in its actual and legal condition (“as seen and approved”) on the basis of photo documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7243

Condition: used, Year of construction: 2019, functionality: limited functionality, machine/vehicle number: 1000033397, Pre-owned Primus 402 Waterjet 5 Axis with one cutting head, has served us for 4 years cutting stone and ceramic benchtops, delivers great cutting capabilities across a wide range of materials, including stone, ceramic, metals, glass, and more. Key Features: - Pioneer Technology: Maximum programming flexibility thanks to the free movement of the cutting head. The 5-axis cutting head is fitted with the patented Intermac infinite rotating C axis system for making top-quality tilted cuts (+/-60°) on complex profiles, with no limits. - Versatile Performance: Primus offers the possibility to process a wide selection of materials such as: natural stone, sintered materials, ceramic, metal, glass, and more. - User-Friendly Interface: Equipped with iCam Software making it easy to program and operate, even for intricate projects. Hnsdpfjytlb Sex Ahvji Condition: - The machine was installed in September 2019 and decommissioned in September 2023. It was running well at the time of decommissioning, with only inaccuracy when cutting circles. Some maintenance may be required to restore it to peak performance, but it remains in good working condition and ready for immediate use in your factory. - The machine’s Probe and Head Rotation Calibration devices may need maintenance or replacement. These features were not critical to our operations and, therefore, were never used. - Decommissioning was carried out by a highly respected and professional Machine Technician in New Zealand, who can also commission the machine installation at your facility. Contact details can be provided upon request. - EXW from Auckland, New Zealand. This is a fantastic opportunity to own a high-performing waterjet at a fraction of the cost of a new model. Contact us today to learn more.