Size: 520 x 720 mm
Impression: 51 Mio.
Equipments:
at end of delivery after lack unit
UV dryer
UV-Interdeck between 1. and 2. unit UV-Interdeck between 4. and 5. unit UV dryer
IR dryer
powder device available not
CPC 1.02
Muvgx8
No Alcolor-waterless machine
Refurbished in 2000
5 wet offset plants with second applicator roller
Formats 12 "8 1/3" 8 "
stretched blankets
Filing holes 12 "with 8 cm ring binder holes, 8 1/3" with 3 holes, and 8 "
Remaliner New generation with feeler
interrupted longitudinal perforation
2 cross perforation stations 12 "and 8 1/3"
1 variable perforation cylinder 16 "and 8"
Longitudinal perforation 2x pneumatic and 3x manual
Ntb77
Folding delivery 8 ", 8 1/3", 12 "
Roll up of paper 700 mm incl. Stroboscope
2x format dare
Pl...
Size: 520 x 740 mm
Bunjkos3vz
Equipments:
high pile delivery
Grafix powder sprayer
perfecting 2 3 / 5 0
touch-control
Automatic washing devices
ink rollers, blanket cylinders automatic wash up device
Platepunch
Semi-automatic Plate-Change
Technotrans cooling
GrafixControl console
Polly Economic alcohol dampening
Size: 520 x 740 mm
Impression: 70 Mio.
Equipments:
blanket wash-up device
VARIDAMP with Badlwin cooling system
Beux0vfbcq
PWHA semi-automatic plate change
Litech basic densitometer
ERGOTRONIC-control panel with Colortronic ink control
CIP3
IR-dryer
impression cylinder washer
ink unit temperature and Dampening cooling Technot
Size: 520 x 740 mm
Impression: 111 Mio.
Technical details:
Printing area: 510 mm x 740 mm
Min. size: 210 mm x 280 mm
Max. size: 520 mm x 740 mm
Minimal Paper Thickness: 0,03 mm
Maximal Paper Thickness: 0,60 mm
Speed: 15
Power: 62,0 Kw/hp
Net Weight: 21510 kg
Measurements: 8640x2760x1860 mm
Equipments:
Powder spray devices: Alphatronic 200
Dryer cabinet version: Cowater-cooled
With exhaust hood, dryer cabinet
Feeder special accessory: Pile support plate, feeder with ramp, with pile alignment
C...
Size: 370 x 520 mm
Impression: 50 Mio.
Technical details:
Printing area: 360 x 520 mm
Min. size: 105 x 145 mm
Pvl0ae
Max. size: 370 x 520 mm
Minimal Paper Thickness: 0,03 mm
Maximal Paper Thickness: 0,40 mm
Speed: 15
Power: 14,5 Kw/hp
Net Weight: 5000 kg
Measurements: 2860x1850x1620 mm
Equipments:
CP Tronic
Speed 15.000 sheets/hour
serial equipment
Platepunch
Minus Version
AUTOPLATE semi-automatic plate change
Perfecting 1/1- 2/0
Bender
Size: 370 x 520 mm
Impression: 95 Mio.
Technical details:
Printing area: 360 x 520 mm
Min. size: 105 x 145 mm
Max. size: 370 x 520 mm
Minimal Paper Thickness: 0,03 mm
Maximal Paper Thickness: 0,40 mm
Speed: 15
Power: 14 Kw/hp
Net Weight: 4850 kg
Measurements: 2900x1900x1700 mm
Equipments:
Kfcvpvdz
Minus Version
Straight machine
Size: 540 x 740 mm
Impression: 45 Mio.
Technical details:
Printing area: 510 x 740 mm
Min. size: 260 x 400 mm
Max. size: 530 x 740 mm
Maximal Paper Thickness: 60 gram - 0,6 mm
Speed: 15000
Bgp9tvw7tw
Equipments:
EPL Ergonomic plate loading
CCI
impression cylinder washer
Perfecting 2-2, 4-0
FM19 densitometer control
roller washers
Comfort package
Blanket washer
Size: 450 x 580 mm
Impression: 12 Mio.
Equipments:
semi automatic plate change
Olivermatic dampening
Technotrans refrigeration and round pump
Bragwx0jnh
Pneumatic roller setting
Seperate magnet cilinder for perforating on machine
powder device
anti-static
Double sheet control
remote control running register adjustment
Size: 370 x 520 mm
Impression: 88 Mio.
Technical details:
Printing area: 360 x 520 mm
Min. size: 105 x 145 mm
Max. size: 370 x 520 mm
Minimal Paper Thickness: 0,03 mm
Maximal Paper Thickness: 0,40 mm
Speed: 15
Power: 14,5 Kw/hp
Net Weight: 5000 kg
Measurements: 2860x1850x1620 mm
Equipments:
ALCOLOR damping with circulation and refrigeration
serial equipment
low-pile delivery
Automatic ink roller wash-up
Speed 15.000 Sheet/per hour
Powder sprayer
plus version
Perfecting 1/1- 2/0
CP-Tronic digi...
Size: 340 x 450 mm
Impression: 19 Mio.
G0sx22n
Equipments:
Semi-Automatic Plate Inserter
Maximum Paper Size: 340 x 450 mm
RP 520-220F Register Puncher
Minimum Paper Size: 90 x 100 mm
Ryobi super dampener dampening with eco 15 cooling
Size: 370 x 520 mm
Cxogh2f
Impression: 73 Mio.
Equipments:
serial equipment
perfecting 4/0 - 2/2
high-pile feeder
extended delivery
Automatic ink roller wash-up
IR-dryer
CPC 1-04 Control Desk for Remote Control of ink Zones, Ink Fountain Roller as well lateral, circumferential and diagonal Register, with Light Pen and Job Memory Card
AUTOPLATE semi-automatic plate change
CP-Tronic digital machine control
ALCOLOR damping with circulation and refrigeration
Powder sprayer
automatic blanket and imp...
Océ ColorStream 3500 H-TWIN
The Océ ColorStream 3500 can be configured as a single simplex unit or
as flexible twin configuration for unrestricted duplex and simplex
Bl0gxqtwzg
also available roll-to-sheet or roll-to-stack
productivity at a printing speed of 75 meters per minute and a print width of 21.25" (approx. 540 mm).
That translates to 505 A4 (single) or 1,010 A4 (twin) impressions per minute with a resolution of 600 × 600 dpi with multilevel technology for 1200 × 1200dpi.
40 KHz PrintH...
x-travel 530 mm
y-travel 450 mm
z-travel 450 mm
CNC-control iTNC 530 HEIDENHAIN
Table dimensions Ø 280 mm
max. table load 200 kg
spindle taper SK 40
spindle turning speed range 12.000 U/min
feed range 15.000 mm/min
rapid traverse 22 m/min
tool change unit 30 Pos.
voltage 400 V
total power requirement 44 kVA
weight of the machine ca. 6,5 t
dimensions of the machine ca. 1,65 x 3,30 x 1,65 m
coolant 1,80 x 0,90 x 1,35 m
chip conveyor 2,70 x 0,60 x 1,20 m
Oskx2
- Factory No.: 107.32.99.204
- Pro...
In this offer you acquire a used 5-colour production system "Xerox 1000 Colour Press".
Item for sale:
1 x Xerox 1000 Colour Press with the following equipment:
incl. Stacker LCS-1
incl. Finisher Interface Module A-GW01
incl. Paperdeck JCF-1
incl. FreeFlow Controller
Counter readings:
Total: Approx. 5,265,956 pages
Colour: Approx. 4,754,305 pages
Black: Approx. 511,651 pages
Bumgpruf33
Condition:
This is a used machine and may show signs of use (minor scratches or yello...
software: Steinbichler Colin / Inspect
Measuring fields: 100, 200, 400 [mm]
Sensor resolution: 1.4 megapixels
Options: FOBA Arobe laboratory stand, calibration plates
Bmzzkaxbqe
Services: Installation • Commissioning and accuracy inspection • DAkkS calibration certificate as required • Individual training • Packaging / transport / insurance
• Rotary table: Comet Rotary Table • Tripod: ASABA tripod: column + foot
turning diameter 540 mm
turning length 1600 mm
control SINUMERIK 880T
power capacity 37 kW
turning speeds 4000 U/min
tool taper SK 40 DIN 69871 - A40
greates pass round over bed 540 mm
chuck diameter 250 mm
swing diameter over slide rest 450 mm
tool magazin: 24-fach
Turning-, Drilling and Milling Unit: Tool System SK 40
C- axis
clamping chuck SMW KNCS 250
swarf conveyor
12-fold turret
3D Interpolation
electronical hand wheel
Machine is for complete working.
Bcs8rrfs
Cantilever rack double sided
Used goods, see pictures.
Height 5 m
arm length 125 cm
Profile IPE 270
6 pcs arms per upright
Negotiation price: € 490,-- net per upright ex stock
Goods are in stock.
Transport and assembly possible on request.
Viewing possible at any time by arrangement.
Further information on request.
Constantly over 5000 running meters of pallet racks
from numerous manufacturers in stock.
Dm8fasn
(Changes and errors in the technical data, specifications and prices
and prices as...
several new centrifugal pump in the box for Grundfos CR 5-8 A-A-A-E-HQQE
5 pieces in stock
Technical data
Pumped liquid: Water
Liquid temp: 293 K
Density: 998.2 kg/m³
Technical:
Speed for pump data: 2853 rpm
Rated flow: 5.8 m³/h
Rated head: 40.3 m
Shaft seal: HQQE
Materials:
Pump housing: Cast iron
Impeller: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Installation:
Maximum ambient temperature: 333 K
Max pressure at stated temp: 16 bar / 120 °C
16 bar / -20 °C
Flange standard: OVAL
Pipe co...
-Our offer number: 5/89
-Threaded drill grinding machine, drill grinding machine, grinding buck, grinder, tool grinder
-Manufacturer: Meteor
-Type: ME 14
-Dimensions: 650x700x1200 mm (BxHxT)
-Drill holder diameter 2-15 mm
-Drill diameter 2-40 mm
-Drill length up to 225 mm
-With threaded drill grinding device 4-50 mm
-Backcut 0-12 degrees
-Peak angle 70-140 degrees
-Grinding disc width 40 mm
-Grinding disc diameter 200 mm
-Engine:
-Type: 40186 Type mez
-Connection current: 220/380 V
-U/min:...
Trapezoidal taps
Diameter 40 mm
Pitch 1/5 inch
Bcsfb7pb30
Slideway grinding machine type SZ 2500x2000x6000/5 Heckert.
Made in Germany
Bc7p3tpqkj
YOM 1987
Main technical data:
Max. grinding length 6000mm
Max. grinding width: 2500mm
Max. grinding height: 2000mm
Size of the table is : 2550x7500mm
Max. workpiece weight on table: 60ton
Table travel speed: 1-40m/min
Machine weight: 150ton
The machine is in working condition and can be inspected under power.
Do not hesitate to contact us for any other information.
Filling machine for sauces, creams, pastes, shampoos, oils, liquid products and water. The machine is new and unused. Sold due to overcompletion. Very solid due to stainless steel construction.
Can fill between 5-50 ml per stroke. Work very quickly and can fill up to 40 bottles / pots / units per minute. The funnel has a filling capacity of 10L. Machine is complete including spare parts and tools.
Blhi7m8kun
Tecno 5, 6 color screen printing machine
Modell: RC 693
Ncpqf
Year of construction: 2004
Clamping device L 80 cm
used, good condition, see pictures
Length 80 cm
width 63 cm
Height 5 cm
negotiation price: € 490,-- net ex stock
Goods are in stock.
Transportation possible on request.
Visits possible at any time by appointment.
Further information on request.
Constantly over 5000 running meters of pallet racking
from numerous manufacturers in stock.
(Changes and errors in the technical data, information
and prices and subject to prior sale! See our AGB, all prices excl. VAT from stock...
Machine d'impression offset OMSO KEYCUP
202vgv
Destinée à l'impression offset de pots 5 couleurs jusqu'au diamètre 150
Année 2004
Tailstock MK 5
Muyxr
SPH 280 mm
Depth 310 mm
Width 840 mm
Height 470 mm
KBA PERFORMA 74-5
Number of Colours: 5
Age: 2005
Counter: ONLY 7 mil. Impressions!!!
• Max. Size: 740x530 mm (29,1"x20,9")
• Max. Speed: 13000 imp./hour
• Dampening: alcohol
• Refrigeration device: Technotrans
• Perfecting: NO
• Remote control: ink and register - CPC Graficontrol Console
Bl2se37lc3
• Plate loading: semi-automatic plate
• Automatic wash up device: ink rollers, blanket cylinders
• Delivery: high pile
• IR dryer: IR Inkdry Plus
• powder sprayer: Grafix
• Screen rem...
Log up to 1,30m diameter
Bmabajbd8h
Technical data:
2 rollers hydraulically adjustable
3 rollers driven
Bending moment: 48 cm/3
Roll diameter: 360 mm
Bngozvaw3x
Power main engine: 7,5 KW
Machine can work horizontally or vertically
Dimensions (length x width x height): 2.0 x 1.3 x 1.9 m
Weight: approx. 5,5 to
Accessories:
various roles
The seller is not liable for writing or data transmission errors. The machine is in appearance, technology and wear and tear according to its age; used machines are sold without any warranty.
Steel construction stage 2 floors
Length 45 m x width 5 m
used, good condition , see pictures
Length approx. 45 m
Width approx. 5 m
Height lower edge 2.5 m
Height top edge incl. floor structure 2.85 m
Load 500 kg/m2
2 x OG
Each floor is suitable for use separately, other formations are possible.
Negotiation price: € 12,000,-- from location warehouse
Storage platform has already been dismantled!
More information on request.
Constantly over 3000 lfm pallet racks
in stock by numerous man...
Balancer
Make: DALEX
Type D 3 -5
Traglast 3 -5 kg
Seilauszug 2000 mm
Eigengewicht 2,9 kg
Fh37qt2
Pressure vessel Niro 5200 l
Second-hand goods, see pictures
double-walled with heating jacket
diameter 190 cm
Height 500 cm
Height incl. feet
2 pieces available
negotiation price: € 1.500,-- net per piece ex stock
Goods are in stock.
Transport and assembly possible on request.
Visits possible at any time by appointment.
Further information on request.
Constantly over 5000 running meters of pallet racking
from numerous manufacturers in stock.
(Changes and errors in the technical data, informati...
Three jaw Chuck (223/5)
7wgmgmz03
Diameter 190 mm
Height 130 mm
Straightening plate 5 tons
used, good condition, see pictures
Measuring table Clamping table
Length 325 cm
width 200 cm
Height 32 cm
negotiation price: € 1.500,-- net ex stock
X7qobdau
Goods are in stock.
Transport and assembly possible on request.
Visits possible at any time by appointment.
Further information on request.
Constantly over 5000 running meters of pallet racking
from numerous manufacturers in stock.
(Changes and errors in the technical data, information
and prices and subject...
Tailstock MK5Point height 250 mmFoot size : 240 mm x 430 mmges. Length 580 mmWidth 240 mmHeight 520 mmAge estimated
Bfaiifg9cx
Two pcs. Lifting platform each 5 tons
Second-hand goods, see pictures
Nuw0n
1.lifting platform:
lifting capacity 5 tons
Overall height 28 cm
length 350 cm
width 200 cm
2.lifting platform:
lifting capacity 5 tons
Overall height 54 cm
length 350 cm
width 190 cm
negotiation price: € 1.900,-- net per piece ex stock
Goods are in stock.
Transport and assembly possible on request.
Visits possible at any time by appointment.
Further information on request.
Constantly over 5000 running meters of pallet r...
110mm spindle diameterSerial No. 12402
Control Heidenhain TNC 355
Table Size 1600mm x 1400mm
Table Load 6300 Kgs
Power of Main Drive 33kW
Longitudinal Traverse Z Axis - 1960mm
Cross Traverse X Axis - 1985mm
Vertical Traverse Y Axis - 1620mm
Boring Spindle Traverse W Axis - 560mm
Table Rotates B Axis - 360 degrees
Speeds 6.3-1250 rpm variable
Spindle Diameter 110mm
Spindle Taper IOS 50
Feed Rate Y, X, Axis 5 - 2500 mm/min, Z, W, Axis 2 - 2500 mm/min
Input 415/3/50hz with transformer
Fitted with ...
Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, slide valve, directional valve
Bfkicjald2
-Magnetic valve
-Type: MFH-5/3E-1/4-D-1
-Working pressure: 3.5-10 bar
-Number: 7x valves available
-Price: per piece
-Dimensions: 165/90/H40 mm
-Weight: 0.6 kg/piece
Ref. -No.: 10215
Brand: DMG
Type of control: CNC
Control: Millplus
Storage location: Halberstadt
Country of origin: Deutschland
Machine-No.: 1159 000113 3
X-Travel: 880 mm
Y-Travel: 630 mm
Z-Travel: 630 mm
Tool changer: SK 40, (32 Pos.)
Motor spindle: 12.000 RPM
NC swivel rotary table: 1250 x 700 mm (L x W)
Further information:
-Chip conveyor
-controlled NC-swivel milling head (B-axis)
-electronic handwheel
Buizn93tk9
-vice and tools included
-simultaneous 5-axis machining possible
spindle diameter:150 mm
x-travel:11000 mm
y-travel:3000 mm
ram stroke:800
dimension of the ram:325 x 325 mm
spindle stroke:700 mm
spindle taper ISO:50
spindle turning speed range:3 - 2000 U/min
feed range:1 - 10.000 mm/min
rapid motion - x-axis:10.000 mm/min
rapid motion - y-axis:10.000 mm/min
table surface area:2000 x 2500 mm
table load:40 t
b-axis:360 °
rapid power traverse circular:1,9 1/min
V-axis:2500 mm
spindle motor:65 kW
total power requirement:100 kW
weight of the machine ca.:150 t
di...
