5 head moulder buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
7
Good mouder for max. 220x120 mm, 2 m infeed table, feed rollers also in table, cromium tables, heads d 40 mm, 6000 rpm, noice cabinet, lot of toolings included, still in use. Heads are bottom-right-left-top-top-bottom. Feed variable max. ab. 25 m/min. Motors are 1. bottom 7,5 kW, right 5,5 kW, left 11 kW, 1. top 11 kW, 2. top 7,5 kW, 2. bottom 11 kW. Feed motor is 5,5 kW. Wypjv23 more
4
6 head moulder Equipped with universal (multi purpose head) Max size of finished work 180 x 100 mm Max. feed speed: 45 m/min Slightly used and in excellent condition Spindle layout: 1. Horizontal botton spindle, 7.5 kW 2. Horizontal top spindle, 7,5 kW 3. Vertical spindle left, 7,5 kW 4. Vertical spindle right, 7,5 kW 5. Horizontal top spindle, 7,5 kW 6. Horizontal bottom spindle, 7,5 kW H2kuywl Jointers for spindle 1 more
6
Piece to by processed: 7w0sttesv • Width 20 – 230 mm • Height 8 – 150 mm Working heads, 6000 rpm, shaft 50 mm 1. Bottom, horizontal, motor 5.5 kW, supporting bearing on left side, also jointer for knives. 2. Top, horizontal, motor 7.5 kW, supporting bearing on left side, also jointer for knives. Fully cardan feeding, motor 3 kW, feeding speed 6 – 36 m/min, adjustable via variator. 7 feeding rollers. Automatic table lubrication. Size of the machine (lxbxh): 2 x 1.7 x 1.7 m Made in Germany, year ... more
4
Throughfeed moulder machine SCM type P230 working widht 230 mm and thickness 120 mm .Number of moulders 7 with universal in the last position . Feeding by cardanic system. CNC control for the 2 lateral spindles with 270 mm lenghts, pneumatic pressing rolls. Bab2tmq0lf more
5
Machine designed for short piece moulding. Was used for production of flooring. Piece to by processed: • Min. length 115 mm T7lkekwt • Max width 100 mm. • Height 12 – 50 mm Working heads, 6000 rpm, shaft 50 mm 1. Bottom, horizontal, motor 8 kW, 100 Hz. 2. Top, horizontal, motor 6 kW, 100 Hz. Feeding via special chain, motor 3.7 kW, feeding speed 12 – 30 m/min, adjustable via variator. Automatic table lubrication. Motorized height adjustment 0.55 kW. Size of the machine (lxbxh): 2.3 x 0.9 x 1.5 ... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbvs28vmbk KIMWOOD 6-head top and bottom 5 Ft. wide sander with 62-inch maximum panel width capacity. -- 1st top and bottom heads opposed contact drums with 13.5" diameter steel drums driven by 150 HP direct drives. -- 2nd top and bottom heads are offset opposed contact drums with 13.5" diameter steel drums driven by 125 HP direct drives. -- 3rd top and bottom heads are offset opposed combination contact roll and smoothing platen heads driven by 100 HP... more
6
Crane Fabr.MAN-GHH BJ. 95 with SWF 10 t train Span width ca. 13 m hook path ca. 6 m Crane is in the camp. Bh9elscqc Good condition. more
1
diameter 260 mm tool adaptor 40 SK S 20 x 2 für DECKEL Slide cross 48 mm Tgoz8bqro Weight 5 kg more
4
Checked Lo9hf2mxx 4 pieces more


5 head mou...
every day

New machines via email!

Be informed!
4
head machine 2uzymcv7 Werner & Pfleiderer Model: MultiMatic MUC 5 5-row 35 to 85 grams of Eligible Power to 8750 pieces / hour. Press pressure adjustable Interchangeable chamber drums obsolete Connection 400V, 16A-CEE plug with 6 months warranty more
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Bbuvn7aukr CULLMAN AUTOMATION End Trim Saw Feed trough -- End Trim Saw for counter tops. This saw will be placed in-line at the end of your existing counter top [...]: -- The saw carriage and guides will be mounted below the infeed table height and will be raised from under the counter top to cut from the nose position toward the backsplash. This saw will use your existing 16" saw blade to cut across counter top widths of up to 60" with a backsplash height... more
5

boring head SCHMID UBS Gr.1

MönchengladbachGermany dealership location
6371 km
used
diameter:200 mm tool adaptor:MK 4 Weight:4 kg Phwc2esn more
2

Moulder 5+2 Sp REX Timbermaster U-41 K

Rivierdijk 409, 3372 BV Hardinxveld-Giessendam, NLNetherlands
6242 km
1991
ready for operation (used)
REX moulder, type Timbermaster U-41-K (A+D+FR+FL+AFV+HFR+AZG) Manufacture year 1991 Bbz9ats9xs Machine specifications - Planing width 410 mm - Planing height 260 mm (2-sides) - Planing height 210 mm (4-sides) - Feeding up to 30 m/min Spindle lay-out: 1. Horizontal bottom spindle, motor power 11 kW 2. Horizontal top spindle, motor power 11 kW 3. Vertical right spindle, motor power 7.5 kW 4. Vertical left spindle, motor power 15 kW #. 2 pc. chamfering units, each 1,85... more
4

Baguette Moulder Sinmag SM 380 S

BabenhausenGermany dealership location
6588 km
2018
as good as new (ex-display)
Baguette Moulder Sinmag Model: SM 380 S Capacity: 50 - 1,200 g Ausrollbreite: up to max. 800 mm Stainless steel version, mobile with undercarriage Connection: 400V, 16A-CEE plug Dimensions: 975 x 690 x 1650 mm, WxDxH L7um7 with warranty more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Cwgarsjw TIMESAVERS 252-1 IC Single-Head Wide Belt Sander: --51" width cap. Combination Head --Head Configuration --1st Head: Combination head with 9-1/2" Dia. rubber covered contact roll (55-60 duro) and a 4" wide electronically controlled segmented finishing platen for fine veneer sanding, 30HP-40 HP motor. --Specifications: -- Belt Size – 52″ x 75, Conveyor Belt Size – 52″ -- 14″ min. part length. Work Height Adjust... more
9

Horizontal 3 head thin cutting bandsaw RHINO SAWYER TS-300

Tussendiepen 39, 9206 AB Drachten, NederlandNetherlands
6264 km
2018
excellent (used)
Horizontal 3 head thin cutting bandsaw, very suitable for flooring industry to cut oak lamella, but also universal cutting with 3 heads Maximum Workpiece Size 310mm (W) x 200 mm (H) Saw Wheel Diameter 31.5" Saw Wheel Width 2" In-feed Speed 0-18 m/min Min. cutting Thickness 2 mm Bby0zad7b9 Main Motor 3 x 22.0 kW Rhino Sawyer band saws are the ideal solution for unlimited application in sawing wood. They are very flexible in sawing various widths and thicknesses. With touchscreen ... more
2

Moulder 5+2 Sp REX Timbermaster U-41 K

Rivierdijk 409, 3372 BV Hardinxveld-Giessendam, NLNetherlands
6242 km
1991
ready for operation (used)
REX moulder, type Timbermaster year 1991 Machine specifications - Planing width 410 mm - Planing height 260 mm (2-sides) - Planing height 210 mm (4-sides) - Feeding up to 30 m/min Spindle lay-out: 1. Horizontal bottom spindle, motor power 11 kW 2. Horizontal top spindle, motor power 11 kW 3. Vertical right spindle, motor power 7.5 kW 4. Vertical left spindle, motor power 15 kW #. 2 pc. chamfering units, each 1,85 ... more
3

one head wire stitcher Agrafix

MindenGermany dealership location
6479 km
good (used)
delivery time june 2017 7swkcyio2 more
3

boring head SCHMID UBS Gr.2

MönchengladbachGermany dealership location
6371 km
used
diameter:300 mm tool adaptor:MK 5 Sssigk Weight:5 kg more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. 33jntjvn TIMESAVERS 352-31C Wide Belt Sander, (3) Heads: 52" cap. Drum, Drum, Platen Wide Belt [...] Configuration: -- 1st Head: Rubber covered contact roll, 11-1/2" dia. (60 - 65 Duro), 50 HP motor. -- 2nd Head: Rubber covered contact roll, 11-1/2" dia. (50 - 55 Duro), 40 HP motor. -- 3rd Head: Segmented Polishing Platen, electronically controlled segments conform to part size to minimize sand throughs of veneer, 30 HP [...]: -- 52" x 103" Abrasive ... more
3

F3 Tilting Spindle Moulder and Feed Unit Hammer

Moorgate Point 1, L33 7DR Liverpool, GBUnited Kingdom
5686 km
good (used)
4hp motor Spindle tiltable to 45 degress 30mm dia spindle Ekdceph 4 speeds 3000 / 6000 / 8000 / 10,000rpm H304 3 Roller power feed unit Year - 2000 CE Compliant Condition - Very Good more
2

Boring Head ROMAI KR 40 23.41

D - 77815 Bühl-WeitenungGermany dealership location
6593 km
1988
used
throat - mm tool adaptor - power requirement - kW 23 mm spindle distance max. 400 mm B09x3igo 1200 U/min total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
6
mach. no.: 23649 F9m303wly more
5
grinding length: 1450 mm grinding width: 400 mm feed: per Hand/manual 130 mm voltage: 110 / 60Hz V / Hz total power requirement: ca.4 kW weight of the machine ca.: 1,0 t space requirements approx. LxWxH: L:1,85xB:1,1xH:1,8 m Motor block Cylinder Head Grinding Machine for the car-automobile area applicable - vertical infeed 130mm manual S8wbxtswy - abrasive ring with 400mm diameter - without magnetic clamping plate though device for clamping of combustion motor blocks [...] more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cwdbf0bm TIMESAVERS "4321-45-01" Wide Belt Sander; 2-Head, 43" max. width [...] configuration: -- 1st Head: 9-1/2" Dia. rubber covered contact roll, 40 HP motor. -- 2nd Head: Combination head with 6" dia. rubber covered contact roll, and 2-1/2" wide finishing platen with dial indicator, 30 HP motor. -- 52" x 103" Abrasive belts with dual "Posi-Trak" electronic solid-state tracking; conveyor belt feed with AC inverter variable feed from 15 - 45 FPM, . ... more
3

Spindle Moulder SCM T55 W Elite S

The Railway Tinahely, Y14 TC97 Wicklow, IEIreland
5475 km
good condition (used)
SCM T55 W Elite S Spindle Moulder - Very Lightly used full profile version - with support rollers and power feed. - Tennoning table and support hood and ring fence. - Electronic rise and fall, electronic 90-45 degree adjustment. - 9.5 HP 3 Phase, can use inverter. - Spare spindles and over €3000.00 in tooling. F3yjxeb - 1 year old more
1

boring head D'ANDREA TA 170

D - 77815 BühlGermany dealership location
6593 km
used
diameter 40 - 320 mm tool adaptor SK 50 Qgospw more
4
centre height 90mm spindle culvert in tie rod 25mm Bkwlcz9 transmission 40 : 1 weight approx. 41 kg more
2

stitching head Hohner 48/5 S

LA-POSTPRESS - Showroom MünchenGermany dealership location
6837 km
used
1x Hohner 48/5 S stitching head 3xh30s29m suitable for any kind of booklet maker / saddle stitcher more
1
Elect./Voltage: 480 V, 60 Cy, 3 Ph. Bbut8heqfr TIMESAVER 337-2 Wide Belt sander (2) Heads --36" width cap. Drum, Drum --Head Congiguration: --1st Head: 11-1/2" Dia. spiral grooved rubber contact roll 30 HP motor --2nd Head: 11-1/2" Dia.. spiral grooved rubber contact roll 20 HP motor. -- Equipped with & Features: --37" x 75" Abrasive belts with pneumatic tracking, 2 HP feed drive -- Variable feed speed from 20 - 60 FPM. -- Infeed & outfeed spring loaded holddown rolls on both heads. ... more
6
Type: FK5 Second-hand machine Sled Spindle diameter 30 mm Speeds: 4 Tckysc2om Height adjustment: Handwheel Power: 6kW Circular saw, crosscut saw Year of construction: Location: Camp / 82281 Herrnzell more
5
33gl8jvd Mach. Nr. 931377A/A428 380 V more
5
length 160 mm Vmb87p88r width 160 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m This is an electromechanical 4-fold turret. On request we will send you a data sheet. more
2

stitching head Hohner 48/5

LA-POSTPRESS - Showroom MünchenGermany dealership location
6837 km
used
Boegsayxk 1x Hohner 48/5 stitching head suitable for any kind of booklet maker / saddle stitcher more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Sszzj8 TAGLIABUE TAG T123KS Wide Belt Sander (4) Heads:52" Width Cap. Crossbelt, Drum, Combination Head, Combination Head. Head Configuration: -- 1st Head: Segmented cross belt with electronically controlled, 52 mm wide air activated segments, 15/22 KW (2) speed motor, 6" x 289" abrasive belt with 5.5" x 217" inside Chevron belt. -- 2nd Head: Spiral Rubber covered contact roll, 15/22 KW motor. -- 3rd and 4th Heads: Platen head (smooth steel rollers... more
2
Spindle moulder B8xb3obms Spindle diameter 30 mm more
2

one head wire stitcher Bostitch 2

MindenGermany dealership location
6479 km
good (used)
mach. no. 4627 V Tqykjs7hd more
5
length 160 mm Ovk8nhf2 width 160 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m This is an electromechanical 4-fold turret. On request, we will provide you with a data sheet. more
3

boring head WOHLHAUPTER UPA 4

MönchengladbachGermany dealership location
6371 km
used
diameter:400 mm tool adaptor: 50 Weight:12 kg slide adjustment:52 mm feeds:0,02 - 0,24 mm/U fine adjustment - cross:0,01 mm F3ftzlo2g turning speed range:0 - 600 U/min Tool taper:22 mm more
1
Elect./Voltage: 220 V, 60 Cy, 3 Ph. Bbuumq38hb HOLFEK MAXXSPB 1100 RC Wide Belt Sander (2) Heads43" Width cap. Drum, Combinations HeadHead Configuration1st Head: 9-1/2" Dia. rubber covered contact roll, 25 HP motor2nd Head: (3) position Combination head with 20 HP motorSpecifications: --Working with the 1st Head being a 9-1/2" Dia. rubber covered contact roll, 25 HP motor and able to be adjusted to (3) different positions via the Color Touch Screen Control Panel, --The 2nd Head using a (3) ... more
5
Universal milling head, milling attachment, milling extension, angle milling head -Spare part comes from a Wanderer milling machine type KFH401 -Recording output SK50 -Store input gear -swiveling D89ulx3d -Rezs recording mm -Lochkreis mm -Hub travelable approx -Dimensions 640/520 / H590 mm -Weight 294 kg more
5

tilting spindle moulder SCM T150

More Scm T 150
Egenhofen / HerrnzellGermany dealership location
6816 km
1991
good (used)
9yasfcuoc Type: T150 Used Machine Swivel: Yes / -5 to 45 ° 30mm diameter spindle speeds: 4 Height adjustment: electrical tilt adjustment: electrical automatically Yes /: engine brake Motorpower: 6kW Year of construction: 1991 Location: Warehouse / 82281 Herrnzell more


5 head mou...
every day

New machines via email!

Be informed!

to

to

Change search
5 HEAD MOULDER
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,49 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close