Used 5 Head Moulder for sale (30,111)

Condition: used, Year of construction: 1977, pressure 30 t throat 110 mm stroke 50 mm no. of strokes 35 - 80 /min passage to the back 170 mm dayligth 230 mm table surface area 410 x 260 mm table height over floor 790 mm ram surface 190 mm Gtsdpfx Agevuugpebst ram adjustment 35 mm power requirement 1,0 x 1,1 x 1,8 kW Weight 1,3 t permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) as is where is, WITHOUT putting into operation - video at seller's site before dismantling available

Condition: used, mileage: 224,000 km, power: 96 kW (130.52 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,400 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,825 mm, loading space width: 1,230 mm, loading space height: 1,210 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Docking station (MyFord Dock), vehicle without vinyl flooring in load/passenger compartment, 240 A alternator, LED cargo area lighting, smoker's package, sliding door on the left side of the load/passenger compartment, start-stop system, AGM battery 80 Ah (2 batteries) Additional equipment: Driver's airbag, traction control system (ASR), audio system: radio with USB and Bluetooth hands-free system, integrated indicator in exterior mirrors, on-board computer, entry lights, electronic brake-force distribution (EBD), electronic traction control, driver assistance system: hill start assist, driver assistance system: side wind assist, lockable glove compartment, rear wing doors without glazing (180-degree opening angle), interior pollen filter, body type: high-roof panel van, body variant: medium-height roof, high load compartment partition behind driver and passenger, without window but with lower through-loading option, steering column (steering wheel) adjustable for height and reach, truck registration, model update, engine 2.0 L - 96 kW TDCi CAT, parking assistance system, front and rear parking sensors, wheelbase 3300 mm, spare wheel with road tires, low emissions according to Euro 6d-TEMP standard, gear selector/shift knob in leather, windshield wipers with interval control, adjustable, H4 headlights, sliding door right side of load/passenger compartment, mud flaps front and rear, Visibility Package 2, Seat Package 13: driver's seat (4-way adjustable) - passenger double seat, fabric, Seat Package 25: driver's seat (4-way adjustable) - passenger double seat - in velour, steel rims 6.5x16, partly painted bumpers, Style color package, LED daytime running lights, Trend, tinted glazing, half-height trim in load/passenger compartment, side lashing rails in load compartment, lashing points (8), slightly tinted heat protection glazing Cooling system: Special equipment: For pharmaceutical transport (PHARMATRANSPORT) Transcool Multi-temperature system With 3 compartments: -30°C, +22°C, +4°C Standby cooling 220V Payload: 700 kg Vehicle is in good condition! This is a take-away price without TÜV (technical inspection). Gtsdevrallspfx Agbot

Condition: used, mileage: 415,120 km, power: 375 kW (509.86 HP), first registration: 07/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, parking heater, Tel.: (Contact · Telephone · Mobile · WhatsApp) MAN TGX XXL 18.510 4x2 Automatic transmission Cruise control Retarder Lane keeping assistant Adaptive cruise control Automatic climate control Auxiliary heater Mileage: between 338,716 km and 496,466 km Year of manufacture: 07/2021 Full service recently carried out Vehicles are free from technical defects Service contract with MAN is active or existed 5 vehicles available with the following mileages: 415,120 km * 433,633 km * 436,952 km * 441,265 km * 496,466 km Features: Double bed, Dual fuel tanks Color: White Price on request All details without guarantee MAN TGX 18.510 tractor unit, white, leaf/air suspension, automatic transmission, 4x2, diesel, Euro 6, green environmental badge, year of manufacture 07/2021 Equipment / Details: * Aerodynamics package * EfficientLine package * Electronic braking system (EBS) * Brake assist * Cruise control "EfficientCruise 3" * Lane keeping assistant * LED headlights * Headlight cleaning system * Headlight leveling system * Fog lights * Tinted door and windscreen (laminated safety glass) * Cornering light (LED) * MAN Media Truck System * Fifth wheel coupling, 185 mm height, JOST JSK 42 K0, 2” Godsuatdxjpfx Agbstt * Electric glass roof with sunshade and insect screen * Roof spoiler 600 mm * Electrically adjustable & heated exterior mirrors * Rear axle differential lock * Twin tyres * Wheelbase: 3,600 mm Tel.: (Contact · Telephone · Mobile · WhatsApp)

Condition: ready for operation (used), Year of construction: 2008, Control Unit Brand FANUC Model Series Oi-TD Main Drive Gtjdpfx Ajx Sz A Dogbot Number of axis 5 Spindle Speed 10000 RPM Spindle motor power 3.7 kW This 5-axis TORNOS Delta 20/5 was manufactured in 2008. It features dual spindles, each capable of handling bars up to 20 mm in diameter and 170 mm in length, with speeds up to 10,000 rpm. Powered by a Fanuc Series Oi-TD CNC and equipped with a Robobar barfeed magazine, this swiss type turning machine is ideal for precision work. Contact us for more information about this machine. Application Types Turning

Condition: new, The KRM ST 30/5, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, steel, and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and hardened rollers, it provides reliable and precise results. The asymmetrical roll arrangement accommodates heavy plates, and its conical bending capabilities are enhanced by an adjustable rear roller. Moreover, it includes a user-friendly separate control panel with a foot switch for easy operation. Maintenance is simplified through central lubrication, ensuring long-lasting functionality. You can take advantage of the KRM ST 30/5 for your plate rolling needs; request a quote now and enhance your sheet metal processing capabilities. Gjdpfxsihvtgs Agbett

Condition: ready for operation (used), Year of construction: 1977, Immediately available ex-site: Hydraulic folding machine Köllschen Type: AM 2500/5 Year of manufacture: 1977 Bending length: 2550 mm Material thickness: 5 mm Back gauge Additional new bending rails Drive: 7.5 kW Weight: 5 t At a price of EUR 3,750 plus VAT, ex-site Gtjdpfox Tq Edox Agbet

Year of construction: 2025, operating hours: 300 h, condition: like new (used), functionality: fully functional, Trommel screen with a new drum, 5 meters long and 1.8 meters in diameter. Gtsdpfx Agex Tql Debjt

Condition: used, mileage: 130,000 km, power: 96 kW (130.52 HP), first registration: 09/2020, fuel type: diesel, overall weight: 3,400 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,825 mm, loading space width: 1,230 mm, loading space height: 1,210 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Docking station (MyFord Dock), vehicle without vinyl floor covering in the loading/passenger compartment, 240 A generator, LED loading compartment light, smoker's package, sliding door in loading/passenger compartment on the left, start/stop system, fleece battery 80 Ah (AGM, 2 batteries) Other equipment: Driver's side airbag, traction control (ASR), audio system: radio with USB and Bluetooth hands-free system, indicator light integrated in the exterior mirror, on-board computer, entry lights, electronic brake force distribution (EBD), electronic. Traction control, driver assistance system: hill start assist, driver assistance system: crosswind assist, lockable glove compartment, rear wing doors without glazing (opening angle 180 degrees), interior filter: pollen filter, body/structure: high-space box, body variant: medium-high roof, high loading space partition behind driver and front passenger, without window with through-loading option below, steering column (steering wheel) adjustable in height/length, truck registration, model update, engine 2.0 liter - 96 kW TDCi KAT, parking pilot system, parking pilot system front and rear, wheelbase 3300 mm, spare wheel in driving tires, low emissions according to Euro 6d-TEMP emission standard, leather gearshift/selector lever handle, windshield wipers with interval switching, adjustable, headlights H4, sliding door loading/passenger compartment on the right, mud flaps front and rear, visibility package 2, seat package 13: driver's seat (4-way adjustable) - passenger double seat, fabric, seat package 25: driver's seat (4-way adjustable) - passenger double seat - in velour, steel rims 6.5x16, bumper partially painted, style color package, daytime running lights LED, trend, tinted glazing, paneling in the loading/FG area: half-high, lashing rails on the side of the loading area, lashing eyes (8), heat-insulating glazing slightly tinted Cooling system: Special equipment: Transcool Multitemperature system With 3-chamber -30C, +22C, +4C Auxiliary cooling 220V Payload: 700 KG Vehicle is in good condition! Gsdpfxjv Afz Hj Agbett

Condition: good (used), PTC relays, contactors, semiconductor contactors, relays, fiber optic converters -Manufacturer: Phoenix Contact, DIN rail power supply Gsdsfg E E Iepfx Agbett -Type: QUINT-PS 3x400-500AC/24DC/5 -Order No.: 2938594 -Number: 3x power supply units available -Price: per piece -Dimensions: 130/70/130 mm -Weight: 1 kg

Condition: excellent (used), mileage: 233,842 km, power: 95 kW (129.16 HP), first registration: 09/2013, fuel type: diesel, tire size: 235/65R16, axle configuration: 4x2, wheelbase: 3,670 mm, fuel: diesel, fuel tank capacity: 85 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: steel, number of seats: 2, total length: 6,200 mm, total width: 2,100 mm, total height: 2,200 mm, Year of construction: 2013, Equipment: ABS, central locking, electric window regulation, power assisted steering, power mirror, soot filter, traction control, General information Number of doors: 12 Registration number: 60173 Technical information Number of cylinders: 4 Engine capacity: 2.143 cc Axle configuration Gtsdswdr D Nopfx Agbot Tyre size: 235/65R16 Brakes: disc brakes Suspension: leaf suspension Front axle: Max. axle load: 1650 kg; Steering; Tyre profile left: 20%; Tyre profile right: 20% Rear axle: Max. axle load: 2250 kg; Tyre profile left: 20%; Tyre profile right: 20% Weights Empty weight: 2.545 kg Carrying capacity: 955 kg GVW: 3.500 kg Functional Maximum cooling temperature: -40 °C Cooling engine: electric Wall thickness: 10 mm Interior Interior: black Condition Technical condition: very good Visual appearance: very good Number of keys: 2 Other information Cool unit make: Carlsen Baltic Additional information Please contact Moussa or Youssef for more information VIDEO: Mercedes Sprinter 313 CDI EURO 5b Carlsen Baltic/ Herbrand GMBH Coldcar/ Eiswagen/ Vrieswagen 10 chambers / 10 TURE / 10 CHAMBERS Freezes down to -40 degrees Celsius Cooling works great More than 20 in stock Technically and optically in very good condition Cool unit brand: Carlsen Baltic

Condition: used, Technical details: x-travel: 500 mm y-travel: 380 mm z-travel: 330 mm control: Siemens 840 D / 810 D spindle cone ISO: vertikal/horizontal: 40 table surface area: 400x800 fest mm Gjdpfx Agju Nc R Nsbett spindle turning speed - continuous: verikal/horizontal: 35-1800 U/min spindle head swivable left - right: 90 ° rapid traverse X,Y: 3,15 mm/min. rapid traverse Z-axis: 1,6 m/min feed continuous: X/Y/Z: 6,3 - 1250 Total power requirement: 7,4 kW Weight approx.: 1,8 t dimension machine xH: 1,8 x 2,2 x 1,8 m dimensions electric cabinet LxWxH: 0,5 x 0,85 x 2,1 m Machine was rebuilt in 2002, modernized with a modern control Siemens 840D/810D shopmill. - adjustment travel via counter holder slide: 440mm Equipment: - cooling system - control panel with jib arm Accessories: - various collet sleeves - div. SK 40 tapers - various milling arbors i.D. *

Condition: excellent (used), Year of construction: 2011, operating hours: 18,800 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 630 mm, controller manufacturer: Heidenhain, controller model: Heidenhain iTNC 530, table width: 1,150 mm, table length: 560 mm, table load: 700 kg, overall weight: 7,800 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 3,600 h, number of slots in tool magazine: 30, tool length: 250 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, POSmill C 1050 Vertical Machining Center, year of manufacture 2011, including Lehmann TF Vario X 510.520 4th/5th axis (see right) (without LANG clamp) Gtedpfjxzhfnex Agbet Equipped with M&H probing system / tool measurement with 1x POSfix 100mm vise (see left) with 1x quadruple clamping system (see center) Magazine with 30 tool positions, SK40 tool holder. Internal coolant supply, through-spindle air, chip conveyor, etc.... The machine is in very good condition, with very low hours (3600 spindle hours) and, in comparison, even fewer hours on the Lehmann 4th/5th axis. Viewing under power is welcome by prior arrangement, (almost) anytime. Single-operator use (the machine was exclusively operated by myself). The reason for sale is a private accident about two years ago. For further questions and for optional accessories regarding the machine or Lehmann 4th/5th axis, I am gladly at your disposal. Note: The LANG clamp and the tools in the magazine visible in the pictures are NOT included in the sale price and are shown for demonstration purposes only!

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/5 Belt width: 500 mm Centre distance (A-A): 5,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: worm gear motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Gtedpfx Agew Ad Rrjbot Machine weight: approx. 450 kg Machine colour: RAL 6009 Fir green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: excellent (used), Year of construction: 2008, - Blade speed: 2820 rpm Gtodpfx Agox N R Tgsbst - Weight approx. 1450 kg

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Lukas, hydraulic pump hand pump Gtedpfx Agowwqwuebet -Type: ZPH 2A/5 -Pressure range: max. 500 bar -Quantity: 1x hand pump available -Dimensions: 900/300/H200 mm -Weight: 15 kg

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, consists of: 1. Dryer CEFLA FEV E: LAMINAR AIRFLOW DRYER (ECOGEL E4/5) Type: SP-FEV E – 90 kW 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU – 110 kW 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU 4. Roller conveyor CEFLA TR 3000 Heating medium: Electric Installed electrical power for both dryers: approx. 210 kW 1. Dryer CEFLA FEV E: LAMINAR AIRFLOW DRYER (ECOGEL E4/5) Type: SP-FEV E – 90 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. The dryer is configured with a laminar flow of hot air in the opposite direction to the workpiece feed and features adjustable recirculation. Total length: 7,500 mm Working width: 1,300 mm Total width: 1,783 mm Max. drying height: 1,780 mm (excluding conveyor) Useful pass-through height: 80 mm Solvent-laden air exhausted to outside: 0–4,000 m³/h Machine control via 5.7" LCD touchscreen panel VS spark-proof supply/recirculation fan: Output: 2.2 kW; Capacity: 40,000 m³/h; Supply air to the room: 0–4,000 m³/h; Installed heating capacity: 76,400 kcal/h (heating system 90 kW) 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU – 115 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. The dryer is configured with a laminar flow of hot air in the opposite direction to the workpiece feed and features adjustable recirculation. Total length: 7,500 mm Working width: 1,300 mm Total width: 1,783 mm Max. drying height: 1,780 mm (excluding conveyor) Useful pass-through height: 80 mm Installed electrical power: 115 kW Solvent-laden air exhausted to outside: 0–4,000 m³/h Machine control via 5.7" LCD touchscreen panel VS spark-proof supply/recirculation fan: Output: 2.2 kW; Capacity: 40,000 m³/h; Electrical output discharge: 1.5 kW; Supply air to the room: 0–4,000 m³/h; Installed heating capacity: 76,400 kcal/h PR frost protection for 1 heating register, with probe and automatic damper control 3. Cooling Zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives for highly efficient heat exchange due to the high air velocity. The ventilation unit consists of: - Supply and recirculation fan: 3 kW; Capacity: 6,000 m³/h - Exhaust fan: 1.5 kW; Capacity: 6,000 m³/h Digital ventilation adjustment via touchscreen. The air knives are installed across the entire tunnel surface. Gtsdpfew H Aw Sox Agbot Air knife outlet velocity max. 32.5 m/sec Total length: 3,000 mm Useful width: 1,300 mm Total width: 1,783 mm Useful pass-through height: 80 mm Max. tunnel height: 1,780 mm (excluding conveyor) Installed electrical power: 4.5 kW Machine control via 5.7" LCD touchscreen TT 4000 bar conveyor with double chain, steel guides, and chrome-plated bars: 4. Roller Conveyor CEFLA TR 3000 Motorised rollers with PVC covering Length: 3,000 mm Photoelectric sensor for thin panels, thickness 4 mm (Technical data subject to change and errors excepted. Prior sale reserved.)

Condition: like new (used), Year of construction: 2012, Profiling parquet machine for longitudinal side Gtodpfx Aexwnhbjgbot 5+5 motors Speed up to 60 m/min Min. Working width 70 mm (65 mm without bevel) Diamond tools for T&G profile +infeed belt conveyor

Condition: used, mileage: 175,730 km, power: 397 kW (539.77 HP), first registration: 08/2016, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 10x4, wheelbase: 5,100 mm, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, Year of construction: 2016, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, parking heater, traction control, trailer coupling, = Additional Options and Accessories = - Differential lock - Remote central locking - Refrigerator - Drawbar coupling - Hub reduction - PTO (Power Take-Off) - Radio - Reversing camera - Disc brakes - Sun visor - Spotlights - Auxiliary heater - Toolbox - Central lubrication system = Remarks = Volvo FH 540 10x4 Dynamic steering. Hub reduction. Gedpowt T A Esfx Agbstt Work remote. Erkin ER 245.000 L 7+5 Jib. Winch. Scanreco radio remote control. Central lubrication. 6 x hydraulic outriggers. 7 x hydraulic extensions on main boom. 5 x hydraulic extensions on fly jib. Max hydraulic reach: 36.8 m. Max lifting capacity: 45,000 kg. 4.80 m - 46,000 kg 6.80 m - 35,600 kg 9.60 m - 24,000 kg 11.50 m - 19,000 kg 13.80 m - 14,000 kg 15.90 m - 12,500 kg 18.30 m - 11,000 kg 20.70 m - 9,000 kg Manual extension: 23.60 m - 7,200 kg Jib -5: 24.30 m - 4,200 kg 27.10 m - 3,460 kg 29.40 m - 2,900 kg 31.70 m - 2,460 kg 34.20 m - 2,026 kg 36.80 m - 1,700 kg Manual extension: 40.20 m - 1,000 kg 43.60 m - 800 kg 46.80 m - 350 kg = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle 1: Tire size: 385/65R22.5; Steered; Tread left: 75%; Tread right: 75%; Suspension: leaf springs Front axle 2: Tire size: 385/65R22.5; Steered; Tread left: 70%; Tread right: 70%; Suspension: leaf springs Rear axle 1: Tire size: 315/80R22.5; Twin tires; Tread left inside: 30%; Tread left outside: 30%; Tread right inside: 30%; Tread right outside: 30%; Suspension: air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Tread left inside: 80%; Tread left outside: 80%; Tread right inside: 80%; Tread right outside: 80%; Suspension: air suspension Rear axle 3: Tire size: 385/65R22.5; Steered; Tread left: 70%; Tread right: 70%; Suspension: air suspension Weights Unladen weight: 53,320 kg Payload: 680 kg Gross vehicle weight: 54,000 kg Functional Crane: Erkin World Power Financial Information Price: On request Identification Model number: FH 540 10x4 / ERKIN 245.000 L 7+ = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po russki. We make every effort to provide correct information, however, no rights can be derived from the texts provided.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 141447, Technical characteristics: Max. measuring range in mm X axis 500; Y axis 500; Z axis 500 Dimensions in mm Without base: length: 1160; width: 1080; height: 1803 With base: length: 1170; width: 1090; height: 2480 Mass of CMM in kg: without base: 350 with base: 445 Max admissible workpiece mass in kg: 100 Equipment consists of: Coordinate measuring machine (CMM) with base Control (integrated) Control console Software (Calipso 5.4) Documents Probing system Master stylus Reference standard Changer rack Machine status: WORKING Gtodjxxvbropfx Agbjt

Condition: good (used), Injection molding machine, clamping force control unit, control unit -Manufacturer: Demag Kunststofftechnik, clamping force control unit -Type: DMS-SKR 79/5 ID no. RMS -Dimensions: 1/95/H95 mm -Weight: 0.7 kg Gjdpfxoldk H As Agbstt

Condition: used, mileage: 175,730 km, power: 397 kW (539.77 HP), first registration: 08/2016, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 10x4, wheelbase: 5,100 mm, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: other, Year of construction: 2016, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, parking heater, traction control, trailer coupling, = Additional Options and Accessories = - Differential lock - Remote central locking - Refrigerator - Drawbar coupling - Hub reduction - PTO (Power Take-Off) - Radio - Reversing camera Gtsdswxr N Uepfx Agbot - Disc brakes - Sun visor - Spotlights - Auxiliary heater - Toolbox - Central lubrication system = Remarks = Volvo FH 540 10x4 Dynamic steering. Hub reduction. Work remote. Erkin ER 245.000 L 7+5 Jib. Winch. Scanreco radio remote control. Central lubrication. 6 x hydraulic outriggers. 7 x hydraulic extensions on main boom. 5 x hydraulic extensions on fly jib. Max hydraulic reach: 36.8 m. Max lifting capacity: 45,000 kg. 4.80 m - 46,000 kg 6.80 m - 35,600 kg 9.60 m - 24,000 kg 11.50 m - 19,000 kg 13.80 m - 14,000 kg 15.90 m - 12,500 kg 18.30 m - 11,000 kg 20.70 m - 9,000 kg Manual extension: 23.60 m - 7,200 kg Jib -5: 24.30 m - 4,200 kg 27.10 m - 3,460 kg 29.40 m - 2,900 kg 31.70 m - 2,460 kg 34.20 m - 2,026 kg 36.80 m - 1,700 kg Manual extension: 40.20 m - 1,000 kg 43.60 m - 800 kg 46.80 m - 350 kg = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle 1: Tire size: 385/65R22.5; Steered; Tread left: 75%; Tread right: 75%; Suspension: leaf springs Front axle 2: Tire size: 385/65R22.5; Steered; Tread left: 70%; Tread right: 70%; Suspension: leaf springs Rear axle 1: Tire size: 315/80R22.5; Twin tires; Tread left inside: 30%; Tread left outside: 30%; Tread right inside: 30%; Tread right outside: 30%; Suspension: air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Tread left inside: 80%; Tread left outside: 80%; Tread right inside: 80%; Tread right outside: 80%; Suspension: air suspension Rear axle 3: Tire size: 385/65R22.5; Steered; Tread left: 70%; Tread right: 70%; Suspension: air suspension Weights Unladen weight: 53,320 kg Payload: 680 kg Gross vehicle weight: 54,000 kg Functional Crane: Erkin World Power Financial Information Price: On request Identification Model number: FH 540 10x4 / ERKIN 245.000 L 7+ = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) Govorim po russki. We make every effort to provide correct information, however, no rights can be derived from the texts provided.

Condition: good (used), Chain guide rail and roller chain -is an original husband replacement part -for husband Rolex machines and others -Chain guide rail made of aluminum -for 5/8" inch chain -Fastening via carriage bolt: 6 mm -Dimensions: 45 x 32 mm -Weight: 1 kg/m Gedpfx Agsb A N Dqsbstt Price: 70 euros/m -Roller chain made of steel -Drive wheel all: 95 mm 5/8" inch -Chain length: 5 m -Weight: 5 kg/piece -Price 38 EUR/m

Condition: good (used), Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK6 4 pieces -Type: MK6/5 2 pieces / MK6/4 / MK6/3 -Shipping/Price: complete -Transport dimensions: 260/220/H65 mm -Weight: 11.8 kg Gedpfx Ajwu Sgxogbjtt

Condition: excellent (used), Power supply, power converter, power supply unit, switching power supply, DIN rail power supply Manufacturer: Phoenix Contact, power supply -Type: TRIO-PS/1AC/12DC/5 .: 2866475 Gjdpfxeghb Ewe Agbstt -Input: 100-240 V -Output: 12 V -Cardboard dimensions: 185/175/H50 mm -Weight: 0.6 kg

Condition: good (used), Gear cutter, module cutter, hob cutter, tooth form cutter, module milling head, end mill cutter, roller cutter, milling cutter, hob cutter, splined shaft hob cutter Gjdeb A Sriepfx Agbjtt -1x milling cutter from: 650.054.06 A SPAN. < 5 ° EV 4 CO -Diameter: 22 mm -Weight: 0.6 kg