Used Hebrock Top 2000 for sale (48)

Condition: good (used), Hebrock top 2000 edge bander glue application by roller pneumatic pre-cut guillotine pressure rollers trimming saw for finishing top and bottom milling unit R1-R2 max. workpiece height: 50 mm Bsdpfx Amoy Rpicersln max. edge thickness in roll: 3 mm feed speed: 10 m/min machine length: 310 cm The machine is well-maintained and in good condition.

Condition: used, Year of construction: 2008, power: 5.8 kW (7.89 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, total height: 1,400 mm, total length: 2,700 mm, total width: 1,000 mm, overall weight: 550 kg, Equipment: CE marking, No. 04542 Edge banding machine HEBROCK Top 2000 Used, year of construction 2008 Max. edge thickness 3 mm Max. workpiece height 50 mm Feed speed approx. 10 m/min Blodpfxjzrpnls Amrjn Glue pot heating time approx. 5 min Total connected load 5.8 kW Glue application unit with quick-heating glue pot for hot-melt adhesive granules End trimming unit for flush cutting of protruding edge material Combination trimming unit with two motors, 0.37 kW each Four-flute indexable insert cutters for flush, bevel and radius trimming Electronic glue temperature control with digital display Workpiece support with rollers Mobile machine base Transport dimensions approx. 2700 x 1000 x 1400 mm LWH Weight approx. 550 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: good (used), Year of construction: 2002, overall weight: 600 kg, Equipment: CE marking, documentation/manual, For sale: a used Hebrock EURO 2000 edge banding machine. Blodpfxoz Hy A He Amren Equipment: +Cutting unit +Routing unit for radius and chamfer +Digitally controlled glue temperature +Automatic feed +Adjustable workpiece pressure +Extendable workpiece support +Control panel with separate selection of units +Operating manual and machine documentation available Technical data: +Year of manufacture: 2002 +Machine no.: 4868 +Connection power: 7.0 kW +Voltage: 230/400 V +Frequency: 50 Hz +Current draw: 13.6 A Inspection and test run possible by prior arrangement. Invoice with VAT shown. Subject to prior sale and errors.

Condition: used, Year of construction: 2013, machine/vehicle number: 2365, functionality: fully functional, power: 10.5 kW (14.28 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, workpiece width (max.): 2,500 mm, workpiece length (max.): 3,200 mm, height adjustment type: mechanical, feed rate X-axis: 10 m/min, actuation type: manual, total height: 1,650 mm, total length: 4,300 mm, total width: 1,500 mm, overall weight: 750 kg, year of last overhaul: 2021, Equipment: CE marking, documentation/manual, The machine has always been well-maintained, and even minor repairs were carried out by Santen & Marzeion from Heede when necessary. Bjdpfsznwyzsx Amrsln Over the past 4 years, the edge bander has been used very little. Due to the owner's retirement, the carpentry business is being closed down, and I would like to sell this reliable Hebrock machine. The model features 2 jointing cutters, an infeed belt, a squaring shear, a flush saw, a flush router, a rounding router, and saw blades. Questions are welcome.

Condition: not inspected (used), Year of construction: 1995, functionality: limited functionality, HEBROCK Edge banding machine Euro 2000 Year of manufacture: 1995 Without jointing unit With undercarriage BRANDT Edge rounding machine FB 10 Year of manufacture: 1996 Bsdpjzv Eh Nsfx Amrjln Both machines for €1,500.00

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, Hebrock EURO 2000 Edge Banding Machine – fully overhauled, ready for immediate use For sale is a highly reliable and robust edge banding machine manufactured in Germany. The machine has been technically refurbished and is immediately operational – ideal for joineries looking for a solid solution without investing in new equipment. Radius and chamfer adjustment pneumatic. The machine can be tested on site. Condition / Work carried out: - All pneumatic hoses replaced - 2 main cylinders new - Machine thoroughly cleaned - Technically inspected and ready for operation Bedjy Nd H Hepfx Amrjln Technical specifications: - Manufacturer: Hebrock GmbH (Made in Germany) - Model: EURO 2000 - Year of manufacture: 2001 - Voltage: 230 / 400 V - Frequency: 50 Hz - Power: 7 kW - Rated current: 13.6 A Working range: - Workpiece thickness: approx. 10 – 50 mm - Edge thickness: approx. 0.5 – 3 mm - Minimum workpiece length: approx. 250 mm - Minimum workpiece width: approx. 70 mm - Feed speed: approx. 10 m/min - Compressed air connection required (approx. 6–7 bar) Delivery within a 150 km radius available for an additional charge. As we are currently receiving new machines and storage space is limited, we have adjusted the price.

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: 3074, functionality: fully functional, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, total height: 1,618 mm, total length: 4,984 mm, total width: 1,425 mm, overall weight: 1,400 kg, year of last overhaul: 2025, Equipment: CE marking, Due to the acquisition of a new machine, our reliable edge banding machine, purchased new in 2016, is now for sale. The machine has operated in a joinery workshop with 8 employees. It underwent a complete overhaul in January 2025. New radius scrapers, new milling tools, and new polishing wheels were installed. The pre-milling unit has been re-sharpened. The glue roller’s clutch has been replaced. The glue pot was completely refurbished and cleaned. The machine is suitable for both EVA granulate (e.g., Henkel Dorus KS351) and PUR adhesives. The degree of pre-milling, the edge material thickness, and the position of the lower and upper milling tools can be conveniently adjusted from outside the machine housing via manual handwheels. The control system allows custom edge banding programs to be saved. The machine automatically and pneumatically switches between 0.4 mm and 2.0 mm edge banding via program. Bedpfx Amjzhrdujrjln Main specifications: - Power: 13.8 kW / 32 A / 400 V - Compressed air: 7 bar (100–150 l/min) - Touchscreen - Saved edge banding programs - Feed speed: 10 m/min - Edge material thickness, in rolls: 0.5–3.0 mm - Workpiece thickness: 8–60 mm (banding 60 mm thick materials possible) - Minimum workpiece width: 70 mm - Minimum workpiece length: 180 mm (for end trimming saw) / 220 mm (for corner rounding) - Processing units: - Diamond pre-milling (12,000 rpm) - Release agent tank/nozzle - Gluing station - End trimming saw - Milling unit R2 - Radius scraper R2 - Corner rounding unit - Cleaning agent tank/nozzle - Flat scraper - Polishing wheel Price does not include VAT.

Condition: excellent (used), Year of construction: 2024, Hebrock adhesive basin / exchange basin Bsdpfx Amoznnlhjrsln For Hebrock K36 Year of manufacture: 2024 Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, year of last overhaul: 2025, For sale: a used, professional edge banding machine, Hebrock model AKV 3007 DK-F, manufactured in 2016, complete with additional equipment (detailed below). First owner. Overhauled last year (drive belt and rollers replaced, and the glue pot was refurbished). The edge banding machine operated on a single shift, 8 hours a day, from Monday to Friday. The machine is designed for efficient edge banding of furniture components with PVC, ABS, melamine, and veneer edges. This model is valued for its high-quality processing, robust construction, and ability to operate in continuous mode. Very good condition – the machine is in fully operational condition, regularly serviced, and ready for use without any additional investment. VAT invoice 23%. Ready for pickup. The machine is available for viewing by appointment in Borów (83-332). Please contact me by phone for more information, as well as videos and photos of the machine in operation. Main parameters and specifications: - Gluing system: Top-mounted hopper for granules. The machine supports standard (EVA) and polyurethane (PUR) adhesives, as well as zero-joint systems. - Edge dimensions: Edge banding thickness from 0.4 to 3 mm for components with a thickness of 10 to 60 mm. - Power supply: 400 V / 3 Ph / 50 Hz electrical connection. Maximum power consumption is 14 kW. - Units: Equipped with a scraper, trimming cutter, corner rounding cutter, profiling cutter, and polishing unit. - Additional equipment: Pneumatic beam phase adjustment, optional interchangeable glue pot, front notching saw, free feed, front spraying, cleaning spray. Detailed description: A German-made Hebrock narrow strip edge banding machine with a system for applying glue to the edge of the component and edge banding with edges from 0.4 to 3 mm thick for components from 10 to 60 mm thick, as well as pre-milling the board with diamond cutters. The machine is optimally equipped for every type of edge. The machine's equipment is fully utilized thanks to the computer and PLC control, which fully controls the individual units. The patented Hebrock system in the edge trimming units (which involves adjusting the lower and upper cutters from outside the machine – during operation), as well as automatic adjustment between thin and thick edges, eliminates the need to open the rear housing, which results in significant time savings, comfort, precision, and user-friendliness. Technical data: • Edge thickness: 0.4 – 3 mm • Component thickness: 10 – 60 mm • Max edge height: 65 mm • Compressed air requirement: approx. 450 l/min • Feed speed: 7-11 m/min, 0.75 motor • Glue heating time: 6 min • Total power consumption: max. 14kW • Electrical connection: 400V, 50Hz Bljdpfx Amozizabsren • Working height: 880 mm • Machine dimensions [mm]: 5850 x 1425 x 1520 • Machine weight: 1600 kg • Exhaust nozzle diameter: ø 140 mm • Required extraction performance: 24 m3/min • Minimum exhaust air velocity in the exhaust nozzle: 20 m/s • Required vacuum in the exhaust nozzle: 1300 Pa

Condition: used, Year of construction: 2020, Edge banding machine K36, 1 unit, with PLC control (including touchscreen) and hot melt adhesive application to the workpiece; rabbeting cutter (including DIA tool) up to 3 mm cutting depth; glue reservoir with quick-change reservoir system including adhesive dispensing device; high-frequency miter saw station (approx. 16,000 rpm); high-frequency milling station (approx. 16,000 rpm with separate pneumatic milling adjustment); corner rounding cutter (min. workpiece length 300 mm, max. workpiece height 40 mm); radius trimming blade; flat trimming blade (including pneumatic feed); cleaning station; 1 free space for a 2nd milling station or a groove cutter (groove cutter only if the cleaning station is removed); robust chain drive, ball-bearing double roller pressure pad, viewing window from the rear of the machine, pull-out workpiece support, signal lamp for workpiece sequence. Technical data: Max. edge thickness: 3 mm Max. rabbet thickness: 3 mm Min. workpiece height: 8 mm Max. workpiece height: 60 mm Max. rabbet height: 40 mm Min. workpiece length: 160 mm Feed rate: approx. 10 m/min Ready for operation: approx. 5 min. Power consumption: (400V – 3Ph – 50 Hz) Working height: approx. 900 mm Machine dimensions: approx. 5250x1250x2050 mm (L x W x H) Weight: approx. 1700 kg Dust extraction nozzle: 1x140 mm + 1x80 mm 8 mm version K36, 1 unit, quick-change system for corner cutter K36, 1 unit, surcharge for multi-radius trimming blade (R2/R1) K36, 1 unit, rabbeting up to 60 mm workpiece thickness K36, 1 unit, release agent spraying device, plate K36, 1 unit, cleaning agent spraying device, plate K36, 1 unit, nesting for milling station K36, 1 unit, nesting for radius trimming blade K36, 1 unit, pneumatic 3-point adjustment K36, 1 unit, Airtronic Blodpfjzvhk Hex Amren K36, 1 unit, extension of the infeed and outfeed support by 440 mm each, 1 unit. With the help of the plug-in extension of the infeed and outfeed of the table extension, Hebrock offers a solution for an enlarged support area for improved workpiece handling by 450mm. Level monitoring without reservoir, 1 unit. Thanks to a sensor on the top of the glue application roller, the operator can be shown a minimum glue level. A warning is displayed on the screen. Once this warning appears, a maximum panel processing length of 100 m (19 mm chipboard) is possible. Ball bearing for corner rounding cutter 24.1 mm, 1 unit. Ball bearing for corner rounding cutter 24.2 mm, 1 unit. Packaging surcharge, 1 unit. Additional quick-change reservoir including level sensor. Manufacturer: Hebrock, Type: 36/14/1, Article No. H36/14/1, 1.00 unit. Additional changeover motor for corner cutter K36. Manufacturer: Hebrock, Type: 36/08/2, Article No. H36/08/2, 1.00 unit. R1 Storage location: Nattheim.

Condition: good (used), Year of construction: 2016, Edge banding machine Manufacturer: Hebrock Type: AKV 3005 DK-F Year of manufacture: 2016 Total edge length processed: 88,570 m Bjdpfxjz Hbqls Amrsln Edge thickness: 0.3 - 3 mm Workpiece thickness: 10 - 45 mm Feed rate: 10 m/min Total power consumption: 13.4 kW Overall length: 5,000 mm Gluing unit: Yes Trimming saw unit: Yes Radius flush trimming unit: Yes Corner copying unit: Yes Surface scraper blade: Yes Buffing unit: Yes

Condition: excellent (used), Hebrock F5 Edge Bander Well-equipped, can be inspected before purchase. PRE-MILLING cutters, Bsdpfx Ajza Uq Aemrjln Glue application with a roller, Has a glue release mechanism, The glue pot is replaceable. A second glue pot is included. Pneumatic pre-trimming guillotine, Pressure rollers, Final trimming saw, Liquids Top and bottom milling unit, R1 – R2 Profiling cylinder Corner rounding unit Flat cylinder, Polishing unit Pneumatic 3-point adjustment Max. veneer thickness in roll: 3mm, Power consumption: 7.8 KW, Max. part thickness: 50mm Used machine, very good condition Mileage: 62,000 meters

Condition: used, Year of construction: 2015, Plate feed direction: from operator to the left. Maximum edge band thickness: 3 mm. Minimum workpiece thickness: 8 mm. Maximum workpiece thickness: 60 mm. Minimum workpiece width: 80 mm. Minimum workpiece length: 190 mm. Feed rate: 10 m/min. Heat-up time: 5 min. Edge banding unit: Yes, with 2 milling units. Edge banding tool: Dia-changeable milling cutter. Diameter: 100 mm. Height: 44 mm. Adjustment of the infeed guide: manual. Trimming shear up to: 3 mm. Individual edge feeding: possible. Gluing: Glue contact roller. Miter saw: Yes. Combination unit for flush trimming/chamfering/rounding: pneumatically adjustable. Rounding unit: pneumatically adjustable. Profile drawing blade: pneumatically adjustable. Flat drawing blade: Yes, sensor-controlled. Unit display: on the display. Control type: PLC linear control. Operation: Touch screen. Motor power: 13.8 kW. Drive system: Yes. Extendable roller support: Yes. Protective cover: Yes. Weight approx.: 1550 kg. Extraction diameter: 80/140 mm. Dimensions: 5000 mm. Blodpszl Am Isfx Amren Storage location:

Condition: new, Hebrock F5 Altendorf edger well-equipped, can be inspected before purchase, Liquids: PRE-MILLING cutters, glue application with a roller, equipped with a glue discharge, the glue pot is replaceable, pneumatic pre-trimming guillotine, pressure rollers, final trimming saw, milling unit, top-bottom, R1 – R2 Pneumatic 3-point adjustment R1-R2 profile edger Bsdez Di Adepfx Amrjln corner rounding unit flat edger, Polisher max. veneer thickness in roll: 3mm, feed rate: 10m/min, power consumption: 7.44KW, machine is new The catalog price for a new machine with this equipment is over 51,000 EUR.

Condition: used, Year of construction: 2021, machine/vehicle number: K3999, functionality: fully functional, operating hours: 5,384 h, power: 14.6 kW (19.85 HP), input voltage: 400 V, input current: 29 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, feed rate X-axis: 10 m/min, total height: 1,430 mm, total length: 5,250 mm, total width: 1,230 mm, overall weight: 1,700 kg, Equipment: CE marking, documentation/manual, Hebrock K36 AIRTRONIC edge banding machine – zero joint, 2021, low mileage We are selling a single-sided edge banding machine from Maschinenbau Hebrock GmbH (Hüllhorst, Germany), model K 36 with AIRTRONIC system, machine number K3999, year of manufacture 2021. The machine is currently in operation at our facility – fully functional and ready for immediate use. Zero joint – this is what sets this machine apart. The edge banding machine is equipped with an Airtronic hot air unit. Compressed air heated to 300–600 °C is directed through a nozzle directly onto the functional layer of the edge band, just before the pressing zone – the edge band fuses with the panel without a visible glue line. In practice, this means the ability to edge band acrylic, high-gloss, and lacquered fronts with quality comparable to laser technology, without investing hundreds of thousands of zlotys in a laser machine. This is the most expensive and rarest option in this class of edge banding machines – on the used market, there are literally only a few machines with a zero joint available across Europe. The machine can also operate in a conventional mode, using standard EVA and PUR hot melt adhesive. Mileage – documented by the machine’s counters: Operating hours: 5,384 mth Length of edge band applied: 619,339 m (619 km) Parameter Value Type K 36 Machine number K3999 Year of manufacture 2021 Voltage / frequency 400 V / 50 Hz Rated current 28.9 A Total power 14.6 kW Operating hours 5,384 mth Edge length 619,339 m Machine name Single-sided edge banding machine with Airtronic zero joint Machine number K3999 Functionality Fully functional Operating hours 5384 Live demonstration possible Weight / dimensions 1700 kg · 5250 × 1230 × 1430 mm Input current 28.9 A (rounded to 29) Workpiece height 60 mm X-axis feed 10 m/min Edge thickness 3 mm Bljdpfozvu Ekox Amren PRICE 250,000 NET

Condition: used, Year of construction: 2016, power: 12.3 kW (16.72 HP), input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used Hebrock AKV 3005 DK-F edge banding machine, manufactured in 2016. Voltage: 400 V Frequency: 50 Hz Current: 31.7 A Power: 12.3 kW Machine number: 3141 Year of manufacture: 2016 PLC control with touchscreen The asking price is 20,500 euros net (negotiable). If you have any questions or require further information, please feel free to send us a message or call us. Bljdpfx Amez Afctjrjn

Condition: ready for operation (used), Year of construction: 2005, Glue pot Edge application End-cutting units Flush trimming units Radius trimming units Scrapers Buffing units This machine is a compact edgebander for straight workpieces, featuring application rollers for hot-melt adhesive on the workpiece edges. The end-cutting unit—which uses a single saw blade to cut both the leading and trailing edges—and the roll cut-off mechanism are controlled electro-pneumatically. The high-frequency (HF) motors for the end-cutting, trimming, and corner-rounding units are powered by an electronic frequency converter. The pressure required to bond the edge material to the workpiece is generated by spring-loaded rollers in the machine table. TECHNICAL DATA Motor power: 2 x 2.2 kW Frequency: 200 Hz Speed: approx. 12,000 rpm Motor shaft: 30 mm diameter, 58 mm length, internal M16 (left-hand thread), internal M12 (right-hand thread) Max. tool dimensions: 100 x 48 mm Max. milling depth: 3 mm Extraction: 60 mm diameter Solid edge strip thickness: 5 mm Coil edge strip thickness: 2 mm Tool height: 40 mm Tool length: 200 mm Bljdpfx Amjz Egkbjron Feed speed: approx. 10 m/min MACHINE DIMENSIONS Length including outrigger: 3,540 mm Depth including roller table: 1,325 mm Height: 1,520 mm Work table height: 880 mm Work table width with support rail retracted: 210 mm Work table width with support rail extended: 680 mm Weight: 880 kg

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Bodpfx Aslht Hzemrjln Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment (radius, bevel, flush milling)

Condition: used, Hebrock K34 Edge thickness up to 8 mm PLC screen control with 15" touchscreen Pre-milling unit for application before the gluing section (3mm) Gluing station with interchangeable container and glue dispensing device Edge height max. 60 mm Trimming unit Bsdswtfvkjpfx Amreln Milling unit for flush trimming/radius/chamfer milling Corner rounding unit for radii/chamfers Multi-radius pull blade (R1/R2) Nesting Surface pull blade Release agent spraying system Year of manufacture 2023, 52 operating hours Machine is in NEW condition and in TOP condition From a carpentry business closure/retirement Available from carpentry

Condition: used, Year of construction: 1990, Storage location: Nattheim Bsdpfx Asz H Tw Djmroln

Condition: used, Year of construction: 2011, Pneumatic milling adjustment (Straight/Radius) Combination milling station R=2 Corner rounding cutter R=2 to 40 mm Jointing cutter up to 40 mm Flat scraper Profile scraper R=2 Short workpieces PLC control with Pro Face touchscreen Nesting Cooling/antistatic spray - airtronic Protective spraying Kante Riepe incl. interchangeable tank Workpiece thickness 8 - 60 mm Mechanical edge clamping Extraction nozzle: 140 mm Dimensions: Length with extension: 4984 mm Depth with roller table: 1425 mm Max. height: 1618 mm Worktable height: 888 mm Weight: 1400 kg Storage location: Nattheim Blsdpfx Amjxyiiloren

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only affordable and space-saving, but it also boasts the features you need to process edges perfectly from the start: diamond-tipped joiner cutters guarantee excellently prepared workpieces for edgebanding. The equipment includes a joiner unit (up to 2 mm cutting depth), the top-mounted quick-heating glue container, a miter saw, and a combination router. Optionally, the F 2 can also be equipped with a surface scraping blade. Bjdpfx Asi Am U Djmrsln Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edgebanding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm; joiner cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation including glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency router station (approx. 12,000 rpm) with separate pneumatic router adjustment and interchangeable blade router (combination design), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Condition: new, Year of construction: 2026, Hebrock F 4 For the complete processing of your panels For those who don’t want to compromise. With the F 4, we offer you a model that allows you to produce completely finished edges on a machine length of only 4 meters. The F 4 is not only space-saving but also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Extraction nozzle: Ø 1 x 140 mm PLC control with 10″ touchscreen Top-mounted rapid heating glue tank (maintenance-free) Support plate for edge material Automatic central lubrication (miter saw, corner router) Optical display for workpiece sequence Outrigger (extendable to the front) Quick-change unit preparation, including glue change device for PUR processing Surface scraping blade with dual contact Pneumatic roller capping (scissors-type design, Hebrock system) Double roller pressure (ball-bearing mounted) Transport chain with permanently screwed-on special chain plates Edge router Routing unit Blodpshqadcefx Amren Miter saw Corner router Accessories: F4/09 Radius scraping blade (incl. pneumatic lift) F4/09/4 Multi radius scraping blade (R1/R2) F4/30 Pneumatic 3-point adjustment Location: In stock, 54634 Bitburg - available on short notice -

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with joint milling unit including DIA tools, joint thickness up to 40 mm, workpiece thickness up to 3 mm, combined milling station, radius R 2.5 mm. Technical description: with hot melt adhesive application to the workpiece for edge material up to 3 mm. 60 mm workpiece thickness without joint unit, 40 mm workpiece thickness with joint unit, maintenance-free, coated adhesive reservoir, HF trimming station (16,000 rpm) for front and rear edge overhang, HF milling station (16,000 rpm) with replaceable blade milling cutter (combined design) and fine milling adjustment from the operator side, free spaces for additional processing units (Hebrock system), feed rate approx. 10 m/min, cutting depth adjustment of the trimming saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel, double roller pressure beam, unit viewing windows from the rear and operator side of the machine, PLC control including touchscreen. Technical data: - Feed speed 10 m/min. - Board thicknesses from 8 - 40 mm - Weight: depending on the equipment, approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm Airtronic incl. cooling and antistatic spraying device 2014, 1 unit Hot air unit for creating an optical zero joint using special edge materials designed for this purpose. - including pneumatic adhesive reservoir positioning - including cooling and antistatic spraying device - including 2 additional edge channels in quick-change design - including special version corner rounding milling cutter, maximum workpiece thickness 60 mm and minimum workpiece length 200 mm - exclusively for Hebrock edge banding machines of the 3000 series - retrofitting possible later - additional costs upon request Technical data: - max. board thickness 40 mm - max. edge thickness 1.2 - 2.0 mm - 7 - 10 m/min feed speed - Air consumption approx. 280 - 580 l/min (only Airtronic), electronically controlled - ready for operation after approx. 2 min Upgrade to 8 mm edge thickness, 1 unit, up to a maximum of 40 mm workpiece thickness Bjdpfx Amox S Hmzjrsln including pneumatic saw adjustment special version, minimum workpiece thickness 8 mm, 1 unit 3-point pneumatic milling adjustment, 1 unit Switching between radius - chamfer - flush for the combined milling stations. This eliminates the manual adjustment at the combined milling station for the 3rd stop point. PLC control is essential. Cleaning station (wiper), 1 unit Corner rounding milling cutter, 1 unit, including combined tool and pneumatic adjustment for chamfer/radius, maximum workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm. Radius pull blade, 1 unit, including pneumatic feed device, radius R 2.0 mm. Flat pull blade, 1 unit, with pneumatic feed control. Chassis complete, 1 unit Adhesive station change system including adhesive outlet device downwards, in preparation, 1 unit, without 2nd adhesive reservoir. - including the possibility of processing PU adhesive with the machine Dado cutter unit, vertical, in the board, 1 unit, including pneumatic feed device. Vertical dado, groove width 8.2 mm, groove depth 8.0 mm, distance from the workpiece edge 14.0 mm Special version, dado cutter motor with higher motor power, 1 unit Internal extraction of the joint unit, 1 unit, at the extraction manifold of the machine Ball bearing for corner rounding milling cutter 24.1 mm, 1 unit Ball bearing for corner rounding milling cutter 24.2 mm, 1 unit Release agent spraying dev

Condition: new, Year of construction: 2026, The Hebrock K 36 Top model with motorized adjustment – a new machine. This Hebrock bestseller offers unprecedented possibilities. Developed for the highest standards, the K 36 stands for absolute reliability and productivity in daily use. By enabling the machine to be equipped with a stepped cutter and a multi-radius trimming cutter, Hebrock sets new standards in the field of perfect edge finishing for various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Bjdpfxei Am Uko Amrsln Machine dimensions: approx. 5250 x 1230 x 1430 mm (L x W x H) Weight: 1750 kg Equipment: Hebrock K 36. - 15 m/min Edge banding machine K36 With PLC control (incl. 15'' touchscreen), hot melt adhesive application to the workpiece for edge material up to 3 mm; trimming cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free, coated glue tank with interchangeable tank preparation including glue discharge device, high-frequency double-motor trim saw station (approx. 12000 rpm), high-frequency milling station (approx. 12000 rpm) with pneumatic milling adjustment and interchangeable cutter (combination design), corner rounding cutter, radius trimming cutter, flush trimming cutter (incl. pneumatic retraction device), cleaning station, robust chain drive, ball-bearing double roller pressure, unit sight window from the machine rear and operator side, signal lamp for workpiece sequence, pull-out workpiece support, feed speed approx. 15 m/min, edge banding up to 60 mm workpiece thickness 36/08/1 Quick-change preparation for corner cutter 36/08/2/1 additional interchangeable motor for corner cutter R=1 36/09/1 Multi-radius trimming cutter 36/24/1 Release agent spray device 36/24/2 Cleaning agent spray device 36/25 Edge protection spray 36/27 Nesting (1x milling station + 1 x radius trimming cutter) 36/30 Pneumatic 3-point adjustment 36/30/1 Multi-tool for high-frequency milling station (R2/R1/chamfer) 36/45 Axis package Motorized adjustment for panel, edge thickness, and trimming cutter depth adjustment Location: in stock, 54634 Bitburg Available upon agreement.