Used Pellets for sale (278)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much! Blodpfx Akjzw Apgonjp

Year of construction: 2019, operating hours: 5,600 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: DRPL/LP29, Equipment: CE marking, PELLET PRODUCTION LINE – COMERC – CAPACITY 2 T/H Pellet production line with a capacity of 2 t/h, line length 25 m. Raw material: sawdust (spruce, pine, larch). Operating hours: 5600 h. The complete line includes: Sawdust hopper – 80 m³ Screw conveyor from the hopper – length 6 m Sawdust bucket elevator – length 7 m Buffer tank – 1 m³ for the humidification station Humidification and moisture stabilization station Bodpfoz Hw Umex Aknjlp Sawdust bucket elevator – length 7 m Granulator buffer tank – 1.5 m³ Screw conveyor to the granulator – length 2 m RMP 520 Munch granulator Acid-resistant bucket elevator – length 8.5 m Gallen Cuntelfloor pellet cooler Pellet sifter Bucket elevator – length 8.5 m Finished pellet storage tank – 3 t Manual bagging machine – 2–3 people, up to 20 t/shift JKF 15 kW fan for aspiration Aspiration system – extraction from the entire line Cyclone – diameter 1 m Control cabinets – complete Control, measurement and actuation equipment, moisture sensors (2 units) Explosion-proof early spark detection and extinguishing system Visual process overview to be implemented along with the control panel Installed power 217 kW We can send more photos and specifications to interested parties via email. The line is in working condition. Disassembly of the line is the responsibility of the seller. Collection and transportation of the machine is the responsibility of the buyer. We also offer assistance with reassembly, commissioning, and service support. On-site inspection is possible.

Year of construction: 2018, operating hours: 7,000 h, condition: used, functionality: fully functional, We are offering this used Himel / Gama control cabinet for a pellet press and pellet system for straw / hay / alfalfa, manufactured in 2018. It has approximately 7,000 operating hours. The hourly output, depending on the biomass, is 700 - 1200 kg, according to the manufacturer. We also have a separate press with 90 kW available for €95,000; it has approximately 500 operating hours and was manufactured in 2025. Type: Control cabinet for pellet press Number: 20182138 Year of manufacture: 2018 Power supply: TNC-S 400V AC/N/PE Bledpfx Akjzrvh Esnop Frequency: 50 Hz Power: 195 kW Max. current consumption: 375 A If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2015, The lot consists of: Regrind dryer SCR-2500U-CE SHINI; S/N 2CR14080001; 2014; 2,500 kg capacity; 128 kW heating; 15/17.2 kW blower; 2,790 kg Gravimetric feeder DBW-G1-350N-100 Brabender; max. pressure 2 mbar; 230/400 V; < 70 dB(A) Extruder drive motor ELIN MKH831C04 Elin Motoren; S/N 50667613001; 277 kW; 300-1,960 rpm; approx. 1,400 kg DESCH clutch PPF-142RA1-Kado08E2 Extricom; S/N 13063840; 180 kg; release torque 2,022 Nm; max. 2,500 rpm Gearbox RE5XP PGL41,5 Eisenbeiss; S/N W_K 706419/10/1; 2013; 255 kW; 1,961 rpm input / 400 rpm output; 200 l oil capacity; 2,750 kg 12-screw extruder with vacuum system Extricom; 2015; RE5 XPV-28D; 5,360 x 1,380 x 2,410 mm; 3 x 400 V; max. 400 A; 8,500 kg (technical details – download PDF in "Essential information") Melt pump GPE 90/90-03 Nordson; S/N 26837/B; 2014; 66.3 kW Continuous screen changer K-SWE180-4K/RS Nordson; S/N 26837/d; 2014; 1,500 kg/h; max. 500 bar; max. 300 C Underwater pelletizer PoDV 6 TM Gala; S/N 11430294; 2015; 740 kg Vibrating crystallizer WR 16/6-DV Vibrotechnik; S/N 5818001; 2014; 1,900 mm length; 1,600 mm diameter Bagging unit Double/Small/P R&K; S/N 100004/2014; approx. 3,153 x 1,800 x 3,180 mm Extrusion control cabinet MX Multi-Eco 4V315-S1136 Schneider Electric; S/N 1411738; control cabinet Bodj Ahhwdopfx Aknjlp Technical Details: 2,500 kg capacity; 128 kW heating; 15/17.2 kW blower; 2,790 kg

Condition: refurbished (used), Year of construction: 2012, operating hours: 1,000 h, functionality: fully functional, overall weight: 100,000 kg, Pellet production line of Italian manufacture. Renown brands of machinery like General Dies SRL, Miller SRL, FIDA SRL and other brands. Capacity of the line 1.3 tons per hour Pellet press General Dies TAU4 – 110kw Container with movable floor and hydraulic power aggregate Triple-Pass rotary drum dryer 2.5 tons catalog capacity (effective capacity up to 1.5 tons/hour) Transport divider for biomass separation Pezzolato PTH 660/700 (Wood chipper, possibly excepted from the line if buyer wishes so) Furnace for rotary drum dryer and complementary equipment Hammer mill “Miller SRL” 75 kw Transport conveyors for biomass transport Cyclon for dust removal Cooler silo for dust removal Weighing and packing equipment Electric cabinets for the entire line with cables Ventilation tubes for sawdust and wood chips transport Screw air compressor 860l Pump for grease dozing in central press lubrication system Included are additional pieces of equipment like filter silo bags, metal connections etc. (complete line is between 4 and 5 full trucks of equipment) Blsdei Akrkspfx Aknjp

Condition: excellent (used), Year of construction: 2013, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 24480, input voltage: 400 V, The Amandus Kahl flat die pellet press, type 37-850, is a robust industrial machine manufactured by the German machine builder Amandus Kahl for the compaction of various materials. Key technical data (type 37-850) • Die diameter: 850 mm • Roller diameter / width: 350 mm / up to 130 mm Bledpfx Aez I Tkteknop • Number of roller rolls: 4 pieces • Roller speed: approx. 2.5 m/s • Drive motor power: 132 (at 1500 min⁻¹)

Condition: used, Year of construction: 2017, operating hours: 23,009 h, functionality: fully functional, machine/vehicle number: 01559, For sale: a used TOMCO DE11RB-1500CE industrial dry ice pelletizer. This dual-cylinder machine is designed for on-site production of dry ice pellets. TOMCO’s 1500-series literature specifies a nominal production capacity of approximately 1,500 lb/hour (680 kg/hour), depending on the CO₂ supply and operating conditions. Machine details: Manufacturer: TOMCO2 Systems Model: DE11RB-1500CE Year of construction: 2017 Serial number: 01559 Operating hours: 23,009 Condition: Used, fully functional Nominal production capacity: approx. 680 kg/hour Hydraulic drive Interchangeable die system Pellet sizes listed for the 1500 series: 6, 9, 12 and 19 mm The dies included with this machine can be confirmed upon request. Suitable for industrial on-site dry ice production for dry ice blasting, food and seafood processing, transport, and other applications requiring dry ice pellets. Bsdpfsz Az Hdsx Aknolp The machine is located in Noordwijkerhout, the Netherlands. Worldwide shipping can be arranged. Contact us for further information, additional photos, an inspection, or shipping details. Worldwide shipping available. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice. TOMCO DE11RB-1500CE, TOMCO DE11 RB 1500 CE, TOMCO2 dry ice pelletizer, TOMCO dry ice pelletizer, industrial dry ice pelletizer, dry ice production machine, dry ice pellet production machine, dry ice extruder, CO2 pelletizer, hydraulic dry ice pelletizer, dual-cylinder pelletizer, dry ice production equipment, 680 kg/h dry ice machine, 1500 lb/hour pelletizer, used dry ice pelletizer, dry ice pelletizer for sale, dry ice production machine Netherlands, dry ice production equipment Europe, DrDryice.

Condition: reconditioned (used), functionality: fully functional, power: 110 kW (149.56 HP), Equipment: documentation/manual, Complete refurbished Amandus Kahl C35-780 pellet press production line Complete production line featuring a fully refurbished Amandus Kahl C35-780 pellet press. The Amandus Kahl C35-780 pellet press has recently undergone a complete overhaul at the Amandus Kahl factory. All documentation for the newly replaced parts is available. An overview of these parts can also be found among the photos. The production line consists of: - Amandus Kahl C35-780 pellet press - New 110 kW electric motor on the pellet press - Electrical control cabinet with emergency stop, including complete electrical documentation - Conveyor belt - Screening and cooling system that screens the pellets and cools them automatically - Hydraulic nut - Roller head in perfect condition - Including electrical wiring - Feed screw that transports the material to the pellet press - Automatic dosing system that measures the amount of pellets for filling, for example, a big bag - 4 extra dies with 6 mm holes - 60 liters of extra synthetic oil Overview of the parts replaced during the overhaul: - 7 new bearings - 2 new wear rings - 1 new air filter - 2 new oil seals - 1 new oil filter - 1 new oil pump - 20 liters of synthetic oil 800/460 - 1 new pressure piece for the main shaft Bode Agk Rijpfx Aknelp Do you have any questions or would you like to inspect the complete production line? Please feel free to contact me. Sincerely, Danny van Tol Inventtol B.V.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 26, Automatic bagging machine LAMAR SL-200 – 2015 For sale: an automatic bagging machine / packaging machine, model SL-200, manufactured by the Polish company LAMAR in 2015. The machine is designed for packaging bulk products, including pellets, fertilizers, animal feed, soil, and salt. Key parameters: Packaging capacity for pellets: approx. 5 tons/hour. Adjustable product weight per bag: 5–25 kg. Bag length adjustment: lengthening and shortening from the operator panel. Film tube: 940 mm. Technical specifications and equipment: 3-lane weighing dispenser, bag forming unit for 15 kg bags and other formats within the specified adjustment range, gusset forming unit, film sealing unit, Bodo Aa Duyopfx Aknjlp servo motor for positioning the horizontal jaws, unit for measuring bag length on film without printing, roller perforating unit, technological platform, control cabinet, feed hopper. The machine is in very good technical condition. A video of the machine in operation can be provided. Please contact us for further information.

Condition: used, temperature: 95 °C, input voltage: 400 V, operating pressure: 3 bar, Fröling Turbomatic TMC 48 used wood chip and pellet boiler with Lambdatronic control. Suitable for larger properties, workshops and commercial buildings. Nominal heat output: 48 kW. Blsdpfx Ao Afbq Aoknsp Water capacity: 185 litres. Maximum operating pressure: 3 bar. Maximum temperature: 95 °C. Electrical connection: 400 V / 50 Hz, 12 A, 430 W. Net price: EUR 6,000. Exact scope of boiler, feeding equipment and accessories by agreement. Inspection by appointment in Mosonmagyaróvár, Hungary. Loading and transport by arrangement. Installation and commissioning are the buyer’s responsibility.

Year of construction: 2005, operating hours: 20,000 h, condition: used, functionality: fully functional, MEWA UG1008 MS industrial granulator – 160 kW For sale: an industrial MEWA UG1008 MS granulator designed for the secondary shredding and granulation of various pre-shredded industrial and secondary raw materials. This is a robust, German-made MEWA unit designed for continuous industrial operation. The machine is equipped with a powerful 160 kW ABB electric motor, a hydraulic material clamping mechanism, a perforated screen, and electrical control cabinets. The unit can be used in various waste and secondary raw material processing lines, depending on the installed screen and the specific material being processed. MEWA UG1008 type granulators are used, among other things, for the granulation of pre-shredded tires, RDF/SRF alternative fuels, and other materials. Key technical data: Manufacturer: MEWA Model: UG1008 MS Type: industrial granulator Main motor: ABB Motor power: 160 kW Power supply: 400 V / 50 Hz Rotor diameter: approx. 800 mm Cutting chamber dimensions: approx. 1000 × 800 mm Rotor blades: 25 pcs. Stator blades: 5 pcs. Hydraulic clamping Replaceable perforated screen Electrical control cabinets Total unit weight: approx. 18 t (depending on the specific configuration) These technical parameters correspond to publicly available MEWA UG1008/UG1008 MS specifications. Applications The granulator can be adapted for: pre-shredded tires; RDF/SRF alternative fuels; plastic waste; various industrial wastes; other secondary raw materials that require secondary shredding. The final fraction and output depend on the type of material, its fraction, moisture content, density, the installed screen, and the condition of the blades. Bodsz Duuxepfx Aknelp Reference MEWA UG1008 technical descriptions indicate an output of up to 2.0–4.5 t/h for pre-shredded tires or alternative fuels; however, this is not a guaranteed performance for your specific machine – it must be evaluated based on the actual material and configuration. Configuration Based on the inspection, the configuration includes: MEWA granulator; 160 kW ABB electric motor; hydraulic system; perforated screen; electrical control cabinets; cables and other related equipment. The machine is sold in the configuration as shown in the photos.

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. Bledpezvq Rcofx Aknep The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price: 35 000 EUR (VAT is not included)

Year of construction: 2022, condition: like new (used), functionality: fully functional, machine/vehicle number: WDW-70056, WDW – Calibrated containers – Continuous weighing scale for weighing wood pellets or other pellet-shaped bulk goods, complete with a discharge unit. Performance / throughput: 15.6 tons/hour; weighing accuracy: +/- 0.01 kg; cycle times: approximately 2 weighings per minute; the photo shows a representative image; the machine is delivered in its original packaging. Bledpfxoz Ixc Ij Aknjp

Condition: used, Year of construction: 2018, operating hours: 15,339 h, functionality: fully functional, machine/vehicle number: 01584, Available for sale: a used TOMCO2 DE11RB-1500 CE industrial dry ice pelletizer. This machine is designed for on-site production of dry ice pellets. The TOMCO 1500-series specifications indicate a nominal production capacity of approximately 1,500 lb/hour (680 kg/hour). Actual output depends on the CO₂ supply and operating conditions. Machine details: Manufacturer: TOMCO2 Systems Model: DE11RB-1500 CE Year: 2018 Machine number: 01584 Operating hours: 15,339 Condition: Used, listed as excellent and fully functional Nominal capacity: approx. 680 kg/hour Hydraulic system with two cylinders Motor: 30 HP (22.4 kW) Pellet diameters listed for this model: 6–19 mm, depending on the die configuration Operation and maintenance manual available Suitable for businesses producing dry ice pellets for dry ice blasting, food and seafood processing, transport, and related industrial applications. The machine is located in Noordwijkerhout, the Netherlands. Worldwide shipping can be arranged. Contact us for further information, additional photos, an inspection, or shipping details. Bledpfx Aoz Az Hweknep Worldwide Shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical panel cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice TOMCO2 DE01RB-1500, TOMCO dry ice pelletizer, TOMCO2 dry ice pelletizer, industrial dry ice pelletizer, dry ice production machine, dry ice pellet production machine, dry ice extruder, CO2 pelletizer, industrial dry ice production equipment, dual-cylinder dry ice pelletizer, 680 kg/h dry ice machine, 1500 lb/hour dry ice pelletizer, used dry ice production machine, dry ice machine for sale, dry ice pelletizer Netherlands, dry ice production equipment Europe, DrDryice

Condition: used, Year of construction: 2024, operating hours: 500 h, functionality: fully functional, type of input current: three-phase, overall weight: 4,500 kg, input voltage: 400 V, Equipment: documentation/manual, For sale is a Himel / Gama pellet press for straw / hay / alfalfa, optimized! According to the manufacturer, it has a capacity of 700 - 1200 tons per hour, depending on the biomass! The press was installed as a temporary solution because identical models were undergoing a complete overhaul. Bedpfezzf D Ijx Aknelp

Year of construction: 2025, operating hours: 2 h, condition: new, functionality: fully functional, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), animal feed, and more. This is a complete compact system, built on a base frame, consisting of the following components: - Raw material storage hopper (4 m³) with agitator - Hammer mill, 22 kW drive power, for size reduction of raw materials (e.g., wood chips) - Inclined mixer for raw material, including level sensors and fully automatic moisture dosing - Dosing hopper for pelletizing aids (e.g., corn starch) - Dosing screw for optimal material feed to the press (speed-controlled) - Pellet press with 30 kW drive power, featuring a horizontal ring die, discharge chute, temperature monitoring, overload protection, and more - Conveyor belt for pellet discharge, drop height approx. 2.5 m Bljdpfx Aoxlif Rsknop - Drum screen for dedusting and cooling of pellets The entire plant is centrally operated via Siemens PLC with touch display! All parameters are continuously monitored, and the plant will automatically shut down in case of malfunction! The system is designed and prepared for operation with a second press! Price excl. VAT! !!!!! Attention!! We are continuously looking for sales and service partners (worldwide) !!!!!

Year of construction: 2014, condition: excellent (used), functionality: fully functional, We offer this pellet production line from STOZA s.r.o., in very good condition, year of manufacture 2014. Manufacturer: STOZA s.r.o. Year of manufacture: 2014 Condition: very good Category ID: 659 Type: Pellet production line Bljdpfx Aksy Ah Nfsnop If you have any questions or need further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2023, We offer this new pellet press, manufactured in 2023. Manufacturer: Artmash (Ukraine) Year of manufacture: 2023 Production capacity: 700-900 kg/hour Die: 6mm Condition: new (10 tons produced for testing) Spare parts included: 2 dies and rollers Category ID: 917 Blodjzh Hd Njpfx Aknjp Type ID: 2701 Type: pellet press If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2014, Pellet production line ZEPPI ! Capacity - 2t/h Pellet press - ZEPPI 132 Kw Bjdpfxez I S Sve Aknjlp Year - 2014 Exellet condition !

Condition: good (used), Year of construction: 2018, Equipment: documentation/manual, MAAG M-USG 600 H – PET Pelletizing Line, 6,500 kg/h – 2018 Bjdpfx Aszvc R Ujknolp MAAG Automatik M-USG 600 H pelletizing line, manufactured in 2018, designed as an underwater strand pelletizing system for the continuous production of polymer pellets and originally used for PET. The line integrates automatic strand feeding and cutting, water cooling, hydraulic conveying, centrifugal drying and pellet classification, with an approximate nominal capacity of 5,300 kg/h and a maximum design capacity of up to 6,500 kg/h. Equipped with an 80-strand die head, automatic feeding system and strand pelletizer/cutter, hydraulic conveying system, MAAG CENTRO 1600 centrifugal dryer, exhaust fan, VIBRA Schultheis SRK 15/7.5-I-V-S vibrating screen, and control system with Siemens SIMATIC HMI. Predominantly stainless-steel construction in the areas in contact with the product and process water. Suitable for PET pellet production and potentially for recycled PET (rPET) pelletizing applications, subject to process configuration and material characteristics. Two identical lines available, fitted with MAAG CENTRO 1600 dryers, machine numbers CE-0468 and CE-0469.

Condition: used, functionality: fully functional, Performance for 6 mm diameter pellets 2.5-3 t/h We used it for about 5 years. It was purchased used but in very good condition. All bearings were replaced 1 year ago. It was working very well before it was disassembled. Bljdpfex S Ibgex Aknop A new die with rollers has been manufactured for it and is available for an additional price. For additional information, please write on Whatsapp.

Condition: used, operating hours: 30,374 h, functionality: fully functional, machine/vehicle number: 000-0059085/3, overall weight: 997 kg, volume flow: 209 m³/h, power: 113.9 kW (154.86 HP), heating capacity: 99 kW (134.60 HP), smoke pipe connection diameter: 200 mm, nominal heat output: 113.9 kW (154.86 HP), space requirement length: 3,140 mm, space requirement height: 2,400 mm, space requirement width: 2,170 mm, temperature: 90 °C, total height: 2,310 mm, total length: 2,040 mm, total width: 860 mm, type of input current: three-phase, exhaust gas temperature (max.): 160 °C, input voltage: 400 V, negative pressure: 15 Pa, nominal power: 99 kW (134.60 HP), tank capacity: 10 l, input current: 13 A, operating pressure: 3 bar, Equipment: documentation/manual, hot water, KWB UNIT USV100 / Multifire – 99 kW biomass boiler Used Austrian boiler with KWB Comfort 3 controls, output modulation, lambda and negative-pressure control, automatic heat exchanger cleaning and ash extraction. Technical data: - Nominal heat output: 99 kW - Minimum output: 27.6 kW - Fuel input: 113.9 kW - Water capacity: 167 litres - Maximum operating pressure: 3.5 bar - Maximum temperature: 90 degrees C - Weight: approximately 997 kg - Flue connection: 200 mm - Operating hours: 30374 h Data plate specifies 6 mm wood pellets. Wood chip operation depends on the installed extraction and conveying equipment. Exact equipment and scope of delivery by arrangement. Bodpfx Aezhh Iisknolp Located in Mosonmagyaróvár, Hungary. Inspection by appointment. Transport, installation and commissioning by the buyer.

Condition: used, operating hours: 500 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Turn fine-grained biomass into uniform pellets with a complete pelletizing system: pellet press, material bunker, drum sieve with conveyor belt and big-bag handling, all from one manufacturer. This EcoKraft RP22 system is built around the second-generation RP22 press, developed for fine-grained biomass. It has built-in steam extraction from the pressing chamber and two central lubrication points, which keeps it compact and easy to operate. Only one system available. This is a single used system, not ongoing stock. Once sold, it is gone. Pickup and transport slots are limited (press alone: 650 kg). Best for: pelletizing fine-grained biomass (for example fertiliser, wood or plant-fibre mixes) indoors, protected from the weather, with 400 V three-phase power. Not suitable for: outdoor use, unattended operation, or explosion-risk areas (no explosion protection is included as standard). What the equipment means in practice: RP22 GEN2 press, max. 22 kW: powerful press for fine material, with steam extraction from the pressing chamber Bunker 1 m³ with screw discharge and level sensor: the sensor sends a start/stop signal that controls filling of the press Blodoz Rwimopfx Aknop Vibration pads on compressed air: help prevent material bridging in the bunker Drum sieve with conveyor belt: screens out fines and collects them in a big bag Complete package (as supplied by EcoKraft AG): • Pellet press RP22 with automatic central lubrication • Pneumatic grease system for 18 kg buckets with 18 kg food-grade grease bucket • Digital water dosing pump 54 l/h • Die 6x20 mm, 45° pre-compression • Material bunker 1 m³ with screw discharge, level sensor and vibration pads • Drum sieve with conveyor belt 6mm sive + 4 mm sive • Big-bag racks: 1x Vario 1.0 and 3x Vario 1.5 (stackable) • Big bags: 1x 90x90x110 cm and 5x 95x95x150 cm Technical data: Press: 1.70 x 0.80 x 1.70 m, 650 kg, max. 22 kW, 63 A CEE plug (50 A upstream fuse required), customs tariff no. 84793010 Drum sieve: Ø300 x 1200 mm, height adjustable, side feed left or right, max. discharge height 1800 mm Conveyor: length 3600 mm, discharge height 2600 mm, belt width 150 mm, 49 cleats, 0.75 kW Manufacturer: EcoKraft AG, Germany, with manufacturer CE declaration Condition: used. Bought second hand in like-new condition, then used by us for approx. 500 operating hours. The bunker is a demo unit with light signs of use. Location: 6064 Kerns (self pick-up, transport by arrangement). Price: EUR 70,000. Why you can buy with confidence: approx. 500 operating hours in our own use, complete scope as listed, manufacturer documentation available, in-person inspection in Kerns by appointment. Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the system is what this listing says it is, complete and functional when you see it. We do not promise throughput or pellet quality for your material, which is why we ask about your application first. Speed bonus: buy by October 27, 2026 and receive EUR 2,000 off, so EUR 68,000 instead of EUR 70,000. Valid until October 27, 2026, or until the system is sold. Action: send us your material, required capacity and destination. We will confirm suitability and provide a transport estimate.

Condition: used, Year of construction: 2023, operating hours: 2,600 h, functionality: fully functional, total width: 18,500 mm, total length: 23,000 mm, compressed air connection: 6 bar, type of input current: three-phase, input current: 500 A, power: 275.5 kW (374.58 HP), space requirement length: 23,000 mm, space requirement width: 18,500 mm, For sale is a state-of-the-art, fully integrated wood pelletizing and shredding line (built in 2023) for processing A1-grade waste wood and disposable pallets into high-quality heating pellets. This turnkey complete system covers the entire process, from material feed to two-stage shredding, metal separation, suction and filtration technology, pelletizing, cooling, and bagging into big bags or smaller containers. Equipment: * Automatic scraper floor hopper with feeding system * AMIS shredder ZWS 1700 * High-performance cutting mill * Belt conveyor magnet and metal separator * SPÄNEX suction and filtration system with fire protection * GreCon spark detection system * 10 m³ material hopper with dosing system * 2 × ECOKRAFT pellet presses LP22 * Rotary screen systems with conveyor belts * Big bag system and semi-automatic bagging system Technical data: * Year of manufacture: 2023 * Total connected load: 275.5 kW * Required fuse rating: 500 A / 400 V * Production capacity during test run: approx. 460 kg/h Bedpfx Akozhbf Ionelp * Space requirement: approx. 23 × 18.5 m The system is in near-new condition and is available immediately. Detailed technical documentation with all components and specifications is available and will be provided upon request.

Condition: used, Year of construction: 2022, functionality: unexamined, 23 complete containerised pellet boiler houses for sale – 13 × Ba-120 (120 kW) and 10 × Pereko KSR 130 (130 kW), 2.86 MW in total. Price is per unit; volume pricing for 5+ units and for the complete lot of 23. Each unit is a self-contained mobile heat plant: boiler, burners, buffer tanks, plate heat exchanger, flue system and 12 m³ pellet silo in one insulated heavy-duty container. Crane it in, connect flow/return, heat on – no boiler room, no construction. BOILER Bjdoz Iy Ilepfx Aknolp - Ba-120: 120 kW, 70/90 °C, heats approx. 2,180 m² / 5,450 m³ - Pereko KSR 130: 130 kW, 57/95 °C, heats approx. 2,360 m² / 5,900 m³ - Both: 2 × ECOMAT 70 pellet burners (agro pellets / sunflower husk capable, up to 98 % combustion efficiency), turbulators in fire-tube heat exchanger, max. 1.5 bar, flue 300×300 mm, G3 connection, 230 V / 500 W, power modulation 90 % - EN 303-5:2012 (MSZ EN 303-5:2013) STANDARD PACKAGE (every unit) - Heat buffer: 2 × 1,000 L insulated (Hajdu PT1000) - Expansion: 3 × 200 L pressure vessels - Heat exchanger: APV / SPX TR1-MV-16I/2 plate HX, 140 kW, 10 bar - Flue: hot-gas induced-draught fan 450 m³/h / 800 Pa, vortex-tube cyclone separator (92 %), insulated acid-resistant modular chimney, draught monitoring - Fuel: 12 m³ external double-insulated pellet silo + screw feeder to internal day hopper - Ash: Ø100 mm geared ash screw to closed external bin - Controls: manual / automatic mode, control cabinet with PC, remote monitoring & fault alerts via internet, heat meter - Container: 6 × 2.5 × 2.5 m internal, PIR sandwich panels U = 0.4 W/m²K, 6 t steel floor, crane lugs, security lock, 0.9 × 2.1 m door CONDITION Pre-owned, complete, in storage since 2022. Sold as is, where is. Inspection by appointment in Hungary. Transport and recommissioning can be arranged. Ideal for schools, clinics, municipal buildings, farms, greenhouses, worker camps and emergency / temporary district heating. Full technical documentation in English and Ukrainian available on request.