4-axis CNC drilling and milling machine, overhauled in 2020 with indexing unit as rotary axis, machi

IXION 30 CNC W + HEIDENHAIN TNC 415

Condition: good (used), Year of construction: 1998, Hermle C 600 U CNC Machining Center Manufacturer: Hermle Iedpsyrr Ucefx Akxotf Model: C 600 U Year of manufacture: 1998 Operating voltage: 400 V / 3~ Frequency: 50 Hz Control voltage: 24 V Total rated current: 31 A Control system: Heidenhain TNC 426 Machine weight: 6,400 kg X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm Tool magazine: 30 positions Tool holder, type: SK-40 Accessories: included, as per photos (vice + probe) No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Condition: used, Year of construction: 2018, x-travel 620 mm y-travel 520 mm z-travel 460 mm c-axis 360 ° b-axis -50 / +110 ° distance spindle nose and table 170 - 630 mm CNC-control iTNC 640 HEIDENHAIN Table dimensions Ø 650 mm Iedpfoxap Easx Akxjtf max. table load 500 kg spindle turning speed range 12.000 U/min drive capacity - spindle motor 15,5 / 33,0 kW rapid traverse 48 m/min tool change unit 48 Pos. SK 40 coolant IKZ 30 bar voltage 400 V total power requirement 35 kW weight of the machine ca. 10,0 t dimensions of the machine ca. 4,00 x 2,46 x 2,85 m chip conveyor 2,90 x 0,50 x 1,30 m coolant tank 2,30 x 1,70 x 0,45 m coolant pump 0,60 x 0,50 x 0,90 m Oil cooler 0,55 x 0,60 x 1,10 m 5-axis simultaneous machining center - Serial-No.: 9496-117 - Control ON: 10,137 h - Spindle ON: 3,380 h - Control: HEIDENHAIN iTNC 640 - electr. handwheel - IKZ 30 bar - chip conveyor

Condition: like new (used), Year of construction: 2001, operating hours: 10,356 h, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, nominal power (apparent): 44 kVA, controller manufacturer: Heidenhain TNC 430, workpiece weight (max.): 5,000 kg, total height: 4,200 mm, total length: 7,900 mm, total width: 8,800 mm, spindle speed (min.): 10,000 rpm, Year of construction: 2001 CNC controller: Heidenhain TNC 430 Axes X-axis travel mm: 1800 Y-axis travel mm: 2000 Z-axis travel mm: 1100 C-axis degrees: 360º (0,001) B-axis degrees: -7/+187º Feed rates m/min: 60/40/40 Rapid traverse m/min: 60/40/40 Milling/turning table nc: Table dimensions mm: Ø1700x1400 Max. workpiece weight kg: 5000 Itsdsyq Rpcspfx Akxsf Table rotation speed rpm: 200 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper Chip-to-chip time s: 13.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 Tool breakage probe Machine running times Under power: 132612 Spindle Working: 68009 Basic machine dimensions / weight Length mm: 7900 Width mm: 8800 Height mm: 4200

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details. • Feed rates: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high-pressure 40 bar • Documentation: instruction manuals and CE declaration Itodpfx Asymcvmekxof Additional equipment • Coolant tank with paper filter, 600 L • Measuring probe • Chip conveyor • Electronic handwheel (remote) • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 2017, x-travel 5850 mm y-travel 2500 mm z-travel 1000 mm Control 840D sl feeds x- + y-axis 20 m/min feeds z-axis 20 m/min acceleration 5 m/qs spindle drive - main spindle 60 kW spindle turning speed - stepless 24.000 U/min max. torque on the working spindle 87 Nm tool taper HSK-A63/F80 c-axis +/- 360 grad a- axis +/- 100 grad tool changer 20 stück coolant tank 2300 l surface area 6.000*2.500 mm number of T-slots 18 flute distance 125 mm dimensions of the machine ca. 14,8x7,3x5,8 m Machine table Width 2,500 mm Length 6,000 mm Number of T-slots 20 Distance of T-slots 125 mm Dimensions of T-slots 18H8 mm Max. table load 8,000 kg Travels Cross rail: X axis 5,850 mm Cross slide: Y axis, horizontal 2,500 mm Z axis, vertical 1,000 mm Feeds X-, Y- and Z-axes Feed rate 20 m/min Rapid traverse rate 45 m/min Acceleration 5 m/s² Vertical Slide Cross section 560x420 mm Motor spindle Drive power S1 (100% ED) 60 kW Max. speed 24,000 rpm Max. torque 87 Nm Tool interface HSK-A63/F80 C-axis Swivel range ±360 degree Feed 50 min-1 Acceleration 50 rad/s² Holding torque 1,400 Nm Clamping torque 4,000 Nm A-axis Swivel range ±100 degree Feed 50 min-1 Acceleration 50 rad/s² Holding torque 1,400 Nm Clamping torque 4,000 Nm Total dimensions Iodpfx Aoycln Djkxetf Length 14,800 mm Width 7,300 mm Height 5,800 mm

Condition: good (used), Year of construction: 1999, functionality: fully functional, Press force 320 t Bending length 4100 mm Stroke 350 mm Total power requirement 32 kW Machine weight approx. 23,500 kg Space requirement approx. 4300x2600x3400 mm Iedpfxsxu Na Te Akxetf Equipment: -CNC control Amada Operator -Quick-change tool holder Amada -Bottom tool clamping Amada -Controlled axes: y1, y2, x, r, z1, z2 -Rear safety doors -Two-hand foot control

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 107.44.00.407, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece weight (max.): 500 kg, total height: 3,200 mm, total width: 3,200 mm, table width: 600 mm, table height: 2,400 mm, table length: 600 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 20,000 rpm, overall weight: 10,000 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The MIKRON UCP 800 Duro, manufactured in 2018, is a high-performance 5-axis machining center equipped with a Heidenhain iTNC 530 control system. The machine offers travel paths of 800 x 650 x 500 mm (X/Y/Z) and features a C-axis with an endless 360° swivel range. The installed spindle/adapter types are NCD 150 PL and NCD 200 PL with HSK-E63 interface. Itjdox D Ux Tjpfx Akxjf The illustrated table system is currently not mounted. The machine comes equipped with a chip conveyor, a coolant system with filter, as well as complete documentation. The machine is available free loaded on truck (FCA) and has seen very little use overall. The operating hours clearly indicate: Control ON: 30,064 h Machine ON: 10,322 h Program Execution: 4,159 h Drives ON: 7,331 h Spindle ON: 4,231 h The machine is under power and can be demonstrated at any time.

Condition: good (used), Year of construction: 2007, functionality: fully functional, 1 JOBS LINX DESIGN gantry milling machine from 2007 CNC FIDIA C20 – Siemens linear motors – feed rate 50 m/min X 7200 Y 3200 Z 2000 TABLE 6000 X 2500 AUTOMATIC HEAD AXIS A-C A 200° (+- 100°) B 400° (+- 200°) SPINDLE SPEED 24,000 RPM HSK 63 – 27kW – cooling system ATC 20 tools WEIGHT 52T Itsdpfx Akextp Hwoxof

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Isdpfx Aksv N Di Aoxstf Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: excellent (used), Year of construction: 1998, Heidenhain TNC 426 control Itsdpeyrirrjfx Akxef Travel X/Y/Z: 600/450/450 mm Spindle speed 10,000 rpm Tool magazine for 30 tools, SK 40