Used wire EDMs with x-travel of 400-499mm for sale (26)

Condition: used, Year of construction: 2005, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, Travel X 350 mm / Y 250 mm / Z 220 mm incl. chiller Automatic wire threading Gujdpfx Agex Hghuo Djk Water bath

Condition: excellent (used), Year of construction: 2017, operating hours: 7,166 h, functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, total height: 2,815 mm, total length: 3,475 mm, total width: 3,130 mm, This machine is very well maintained and in excellent condition. You can inspect and test this machine under power. Price is ex works, without dismantling. Manufacturer: Mitsubishi Electronic Year of manufacture: 2017 MODEL: MV4800 Operating hours: approx. 7,166 hrs Application type: Wire EDM Machine type: Wire-cut EDM machine Technical Data – Mitsubishi MV4800 General Information Width: 3,130 mm Depth: 3,475 mm Height: 2,815 mm Weight: 5,700 kg Movements X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 510 mm U/V travel: 200 (+/-100) mm Workpiece Diameter over bed: 1,250 mm Diameter over saddle: 1,020 mm Workpiece diameter: 505 mm Maximum table load: 3,000 kg Worktable Godpfx Agovdu Hzs Deuk External length: 1,080 mm External width: 780 mm Price significantly reduced. This machine is being sold due to business relocation.

Condition: used, Year of construction: 2022, table length 640 mm table width 540 mm 810 x 700 x 215 mm travel x / y / z 400 x 300 x 220 mm V-axis 120 mm U-axis 120 mm workpiece weight max. 500 kg Control M800 D-CUBES wire dia. 0,1 - 0,3 mm weight of the machine ca. ca. 3,1 t dimensions of the machine ca. 2,8 x 2,1 x 2,1 m Mechanical engineering concept: Hybrid design Machine included: - ODS - Optical Drive System - Tubular direct drives in XYUV axes - Linear scales in XYUV axes - Collision protection XYUVZ axes - Intelligent AT - Automatic wire threading for wire diameters 0.10 - 0.3 mm - Automatic fine hole search function - Easy 3D-Setup workpiece position detection - 5 controlled axes - prepared for additional axes - PFC - Precise Finish Circuit - H-FS - Finishing stage - LLS - Long Life System Godpfx Aevt Ec Sog Djuk - 10 kg wire station - 4-sided framing table - hardened - Wire alignment block - Wire chopper - Compressor cooler Mitsubishi Electric M800 D-CUBES control system: - 19” full-touch monitor with gesture control - Hand pilot with configurable LCD display - Job planner incl. job interruption function - 3D CamMagic on board - Import of 3D Parasolid, 2D DXF / DWG - Graphic check: 3D, front and side view and top view - Operating and maintenance data output included - Interfaces: Ethernet TCP-IP, 2 x USB port - Corehole technology Incl. the following special options: - ERGO-Lux light Ergonomic workspace lighting with LED floodlight Two LED lights, 3 x 6 watts each IP67 version for use in the work area Anodized aluminium housing with reflector insert - Training course 5-day basic seminar at a Mitsubishi training center Mitsubishi training center for 1 person if attended within 12 months of commissioning. Travel and accommodation costs are at your expense - all dimensions, weight and performance data without obligation - Used machine without warranty - interim sale reserved -

Condition: used, Year of construction: 2008, Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure External PC with contour management and Exprog software Guedpfx Agexy Rx Ij Djk Cooling unit for dielectric fluid Automatic fire extinguishing system Automatic central lubrication Extraction system, Measuring probe Machine lamp Workpiece carrier SK 40 Measuring mandrel SK 40 cutter outer diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outer diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm X-axis travel: 500 mm Tool weight: max. 20 kg Y axis travel: 300 mm Travel path W-axis: 200 mm Machine space requirements: 2535 x 2200 x 2280 mm A-axis rotation range: 360° E-axis swivel range: 180° Weight approx.: 4800 kg Connected load: 5,4 kW colour: grey RAL 7035/7043

Condition: used, Year of construction: 2019, Wire EDM machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of manufacture: 2019 Operating hours: approx. 9,500 Control unit: M800 D-CUBES Mitsubishi Electric CNC Control Hybrid construction Travel paths: X/Y/Z: 400 x 300 x 220 mm U V travel: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS - Optical Drive System Tubular direct drives on XY axes Linear scales on XY axes Intelligent AT – Automatic wire threading For wire diameters 0.10 – 0.3 mm Automatic fine hole detection function 5 controlled axes – prepared for additional axes PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler ä101225 Guodexpfy Sepfx Ag Djk

Condition: excellent (used), Year of construction: 2010, operating hours: 16,712 h, Sodick AG 400 L Premium in very good condition year of manufacture 2010-11 x, y, z 400 x 280 x 250 mm u, v 120 x 120 mm max. workpiece height 240 mm internal tank dimensions 866 x 626 mm max. workpiece weight 500 kg max. taper 25 degrees 0.1-0.3 mm wire can be used (0.25 mm installed) chiller wire chopper quick-clamping system smart grip automatic wire threading complete documentation many accessories Gusdpfx Asx Aix Eog Dok machine is under power for inspection.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 25,539 h, functionality: fully functional, machine/vehicle number: 0.2633/331852, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, total height: 200 mm, total length: 800 mm, total width: 500 mm, workpiece height (max.): 200 mm, type of input current: three-phase, overall weight: 2,200 kg, table load: 500 kg, positioning accuracy: 0.005 mm, Equipment: cooling unit, documentation/manual, fridge, CHARMILLES TECHNOLOGIES from 2001 Model: ROBOFIL 290 P 0.25MM AND 0.30MM WIRE EROSION MACHINE MAKE AN OFFER TO BUY BACK Features: - Maximum part dimensions: 850 x 500 x 200 [mm] - Maximum weight: workpiece weight: 500 [kg] - X x Y x Z strokes: 400 x 250 x 200 [mm] - U x V stroke: 400 x 250 [mm] - clearance/height angle: ±30 [°] / 200 [mm] - wire diameter: 0.25 [mm] - acceptable coil types: P3 and P5 - tank capacity: 300 [l] - generator: 10 [kVA] Guodpfx Agov Rfm Ss Djk - 400/400V isolation transformer - dimensions: 1800 x 1600 x 2130 [mm] - weight: 2200 [kg]

Condition: repair required (used), Manufacturer: FANUC Tip: A04B-0221-B201 The condition of the machine is unknown, it does not work, it is for sale in this condition, !!! Gsdpfsik Hb Tex Ag Deuk We do not know what is the probleme!

Condition: used, Year of construction: 1989, serial number L169 output 6 kw ja seperat Gusdpfevu Hl Rsx Ag Dsk digital readout ja Wizard Puls50 Kühlwasseraufbereitungsei

Condition: used, Year of construction: 2008, Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure External PC with contour management and Exprog software Cooling unit for dielectric fluid Automatic fire extinguishing system Automatic central lubrication Extraction system, Measuring probe Gjdpfxexy Rxho Ag Dsuk Machine lamp Workpiece carrier SK 40 Measuring mandrel SK 40 cutter outer diameter: Max. 320 mm Shank tool diameter: 10-320 mm Outer diameter disc-shaped tools: Max. 320 mm Cutting length: max. 480 mm X-axis travel: 500 mm Tool weight: max. 20 kg Y axis travel: 300 mm Travel path W-axis: 200 mm Machine space requirements: 2535 x 2200 x 2280 mm A-axis rotation range: 360° E-axis swivel range: 180° Weight approx.: 4800 kg Connected load: 5,4 kW colour: grey RAL 7035/7043

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, machine/vehicle number: 50163, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, overall weight: 4,000 kg, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Bidding obligates the bidder to collect the machine within the designated timeframe from 26.01.2026 to 29.01.2026! Guedpfxjxqp R De Ag Dok TECHNICAL DETAILS Travel X-axis: 400 mm Travel Y-axis: 300 mm Travel Z-axis: 300 mm MACHINE DETAILS Electrical Data Operating voltage: 380/400 V Frequency: 50 Hz Rated current: 80 A Connection: 12 kVA Tank dimensions (L x W x H): 900 x 500 x 600 mm Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,700 x 2,500 mm Weight: 4,000 kg EQUIPMENT Documentation

Condition: used, Year of construction: 2004, Technical details: table length: 920 mm table width: 600 mm ampere: 13,2 A weight of the machine ca.: 6 t dimensions of the machine ca.: 2,46 x 2,24 x 2,33 m X-axis: 600 mm y-axis: 400 mm Z-axis: 260 mm max. table load: 1500 kg Gjdpfxsuzbaye Ag Dsuk The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg. *

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, total height: 2,015 mm, total length: 2,760 mm, total width: 2,025 mm, workpiece height (max.): 215 mm, workpiece width (max.): 700 mm, workpiece length (max.): 810 mm, table width: 640 mm, table length: 540 mm, empty load weight: 2,700 kg, Equipment: documentation/manual, USED ​​MITSUBISHI MV1200-S Wire EDM Gusdpfx Agoxlc Eqo Djk

Condition: used, Year of construction: 1999, functionality: fully functional, Fully functional machine. Viewable at our Semsales premises from mid-June. Gusdpfxswmw I Sj Ag Djk

Condition: used, Year of construction: 2023, Wire erosion / EDM Travel distance X: 400 mm Travel distance Y :300 mm Travel distance Z: 250 mm max. workpiece size X: 850 mm max. workpiece size Y: 610 mm max. workpiece size Z: 250 mm max. workpiece weight: 500 kg table size X: 630 mm table size Y: 493 mm with AWF ( Automatic Wire Feeding ) Gjdpfxoxdnkie Ag Deuk U / V axis: 150x150mm generator: 40 Ampere

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06F2S765, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, The machine is currently serviced and in good condition. The wear parts have been extensively replaced. The EDM machine has barely been used in the last four years. Transport, installation and operator training can be organized at an additional cost. Gujdpjwtd Edofx Ag Dok

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 00402, travel distance X-axis: 450 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 162 mm, workpiece width (max.): 760 mm, workpiece length (max.): 1,100 mm, table load: 500 kg, No reserve price – guaranteed sale to the highest bidder! This machine is being auctioned as part of an operational closure. Placing a bid obliges the buyer to collect the item within the specified period from 26/01/2026 to 29/01/2026! TECHNICAL DETAILS Travel X-axis: 450 mm Travel Y-axis: 320 mm Gjdpjxqpvyefx Ag Djuk Travel Z-axis: 162 mm U-axis travel: ± 50 mm V-axis travel: ± 50 mm Max. workpiece dimensions: 1,100 x 760 mm Max. load capacity: 500 kg Max. workpiece height during immersion: 200 mm Max. workpiece height between wire guides: 360 mm Max. workpiece height for wire threading: 200 mm Tank dimensions: 1,150 x 200 x 2,280 mm Tank capacity: 1,000 l Measuring resolution: 1 µm Max. manual speed: 15 mm/s MACHINE DETAILS Control system: CHARMILLES Electrical data Operating voltage: 380 V Frequency: 50 Hz Rated current: 9 A Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,700 x 2,700 mm Weight: 5,000 kg EQUIPMENT Matching workshop drawer cabinet Corresponding accessories Documentation

Condition: good (used), Year of construction: 2003, functionality: fully functional, Fanuc Series 180iS-WB Control Travel paths: X 320 mm, Y 220 mm, U 120 mm, V 120 mm, Z 180 mm, Max. workpiece weight 500 kg, Machine weight 1,700 kg, Power supply 13 kVA The machine can be inspected while powered. Gsdpfx Aswl Hiiog Djuk

Condition: used, Year of construction: 1995, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 400 mm, total height: 2,230 mm, total length: 1,800 mm, total width: 1,600 mm, workpiece height (max.): 400 mm, workpiece width (max.): 500 mm, workpiece length (max.): 850 mm, overall weight: 2,500 kg, Charmilles Robofil 310 Year of manufacture: 1995 Travel paths (X/Y/Z): 400 x 250 x 400 mm Travel paths (U/V): 400 x 250 mm Taper angle: +/- 30° at 400 mm height Guedsw Hxqnepfx Ag Dsk Max. workpiece dimensions (width x depth x height): 850 x 500 x 400 mm Max. workpiece weight: 1000 kg Collision protection on X/Y/U/V/Z axes Standard wire guides: 0.25 mm Machine dimensions: 1800 x 1600 x 2230 mm Machine weight: 2500 kg The machine was in operation with our customer until recently and is available immediately.

Condition: used, Year of construction: 2004, functionality: unexamined, machine/vehicle number: 80.4055.0109, workpiece weight (max.): 1,000 kg, travel distance X-axis: 450 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 360 mm, table width: 700 mm, overall weight: 9,000 kg, table length: 500 mm, Makino EDNC 43 CNC Sinker EDM CNC sinker EDM machine (electrical discharge machining) Control: Makino MGF / MGF‑20 / MGF‑60 – stable and widely used in industry Working axes: X = 450 mm, Y = 350 mm, Z ≈ 350 mm Table: 700 × 500 mm, load capacity up to 1000 kg Guodpfxswww Sxj Ag Djk C‑Axis: full rotation – ideal for rotary electrodes

Condition: used, Year of construction: 2014, Wire erosion / EDM Travel distance X: 400 mm Travel distance Y :300 mm Travel distance Z: 250 mm Gsdpfxew H Awxj Ag Djuk max. workpiece size X: 600 mm max. workpiece size Y: 470 mm max. workpiece size Z: 240 mm max. workpiece weight: 500 kg table size X: 860 mm table size Y: 690 mm with AWF ( Automatic Wire Feeding ) U / V axis: 150 x 150 submerged cooling unit

Condition: used, Year of construction: 2006, travel -x axis 450 mm travel -y axis 300 mm travel -z axis 320 mm travel -u axis +/- 50 mm travel - v +/- 50 mm control MGW-S3 positioning accuracy +/- 0,015 mm repeatability +/- 0,015 mm table dimension (L x W) ~ 580 x 730 mm max. size of workpiece LxWxH ~ 730, 580, 300 mm max. workpiece weight ~ 800 kg Overall size ~ 3.100 x 3.100 x 2.300 mm Guedpfxovzcn Is Ag Dok weight of the machine ~ 3.400 kg Wire Eroding Machine | MAKINO - EU43 The machine is in a well-maintained condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: EU 43 | EU-43

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 55DM2758, TECHNICAL DETAILS Travel paths X / Y / Z: 600 / 400 / 300 mm Cutting capability: H/W 30°/45° (30/45° instead of 15° for 0.25 mm wire) Control unit: MITSUBISHI M700 Control software: MITSUBISHI ELECTRIC “ADVANCE Plus” Gedpfowr Aclox Ag Djuk Replacement of X and Y linear scales: November 2022 MACHINE DETAILS Total weight: 3,500 kg Overall length: 2,687 mm Overall width: 3,030 mm Overall height: 2,150 mm Input voltage: 400 V Input current: 50 A Type of current: Three-phase Input frequency: 50 Hz EQUIPMENT - ODS optical drive system - Direct drive motors for the X and Y axes - Linear scales on the X and Y axes - Intelligent automatic wire feeding system (wire diameter 0.1–0.3 mm) - Wire straightening unit - Automatic wire cutter (for thicker wires) - Automatic hole detection - 3D CAD/CAM control - 5 controlled axes + preparation for additional axes - PFC precision machining (Precise Finish Circuit) - LLS longevity system - 10 kg wire spool holder (reel) - U-shaped, hardened, segmented receiving table - Compressor dielectric (water cooling) - Preparation for remote communication (mcAnywhere) - CE version - Clear display of main functions on the screen - Programming with ESPERADVANCE interactive dialog system - Control unit prepared for receipt of 3D files - Graphical inspection: 3D, front view, side view, top view - Handheld control device - Ethernet TCP-IP and 2 USB connection options - Preparation for remote communication (mcAnywhere)

Condition: not inspected (used), Year of construction: 2002, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, table width: 515 mm, table length: 640 mm, Wire EDM machine Chmer EDM Type: CD 305G Gjdpfx Asqgcimeg Dsuk X-path: 400 mm Y-path: 300 mm X-path: 220 mm bed: 515 x 640 mm Year of construction: 2002 Hours: 16333 Including documentation and parameters Dimensions: 245x200x203 cm LxWxH

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 331965, workpiece weight (max.): 500 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 200 mm, total height: 2,180 mm, total length: 1,800 mm, total width: 1,600 mm, workpiece height (max.): 200 mm, workpiece width (max.): 500 mm, workpiece length (max.): 850 mm, overall weight: 2,190 kg, Charmilles Robofil 290P Year of manufacture: 2001 Travel distances (X/Y/Z): 400 x 250 x 200 mm Travel distances (U/V): 400 x 250 mm Taper angle: +/- 30° at 200 mm height Max. workpiece dimensions (W x D x H): 850 x 500 x 200 mm Max. workpiece weight: 500 kg Programmable pressure levels Injection pressure upper nozzle: 0...11.5 bar Injection pressure lower nozzle: 0...11.5 bar Standard wire guides: 0.25 mm Guodpew Htdpsfx Ag Dsk Machine dimensions: 1800 x 1600 x 2180 mm Machine weight: 2190 kg The machine was in use with our customer until recently and is available for immediate delivery.