Used welding sets for sale (382)

Condition: as good as new (ex-display), type of input current: AC, warranty duration: 6 months, type of cooling: water, Process-controlled industrial welding machine, 4-roll wire feed motor, ideal for processing both low and high alloy materials as well as aluminum using TWIN-pulse and MIG brazing processes, with a separate wire feed in a portable case. Highly economical—up to 30% faster than conventional units, minimal to no spatter, easy operation, improved visibility in the root area, and deeper penetration thanks to high plasma pressure. Equipped with innovative SPEEDPULS technology for high-speed pulsed arcs at maximum quality. Euro connector for operation with liquid-cooled torches. Hjdpfoyhpkmex Am Aofh Technical data: - Cooling type: Liquid-cooled - Mains voltage: 400 V +/- 15% - Connected load: 14.3 kVA - Fuse rating: 32 A - Adjustment range: 25 - 400 Amps - Duty cycle: 60% at 350/400 Amps (40°C/25°C), 100% at 320/350 Amps (40°C/25°C) - Wire speed: 0.1 - 25 m/min - Wire diameter: 0.6 - 1.2 mm (steel), 0.6 - 1.6 mm (aluminum) - Protection rating: IP 23 - Weight: approx. 127 kg Scope of delivery: Power cable with CCE 32 A plug, user manual, ZWP 10m.

Condition: like new (used), functionality: fully functional, welding current (min.): 330 A, The Cebora TIG Sound AC-DC 3340/T Synergic is a professional three-phase inverter TIG/MMA welding machine designed for medium-to-heavy industrial fabrication. It supports both AC and DC TIG welding, making it suitable for aluminum, stainless steel, steel, copper, magnesium, and titanium applications. Main features AC/DC TIG welding DC TIG for steel, stainless steel, copper, titanium AC TIG for aluminum and magnesium MMA (stick) welding support Synergic control system Automatically suggests welding parameters based on: material thickness Hedpoy Tb Nmofx Am Asfh welding position Pulse TIG mode for thin materials and reduced heat input HF (high frequency) ignition and Lift-TIG start 9 programmable memory slots Water-cooled system built in Remote control compatible foot pedal torch up/down controls Selectable AC waveforms square triangular sine with 9 waveform combinations for arc control and cleaning balance Tunnel cooling design for dust protection and better electronics reliability Technical specifications Specification Value Input power 400V, 3-phase, 50/60 Hz Welding current range 5–330 A (TIG) Duty cycle 310 A at 100% Max output 330 A Protection class IP23 Weight approx. 93 kg Cooling Integrated water cooling Typical applications Aluminum fabrication Stainless steel pipe work Aerospace and motorsport fabrication Industrial maintenance Precision TIG welding Medium/high production environments

Condition: used, Technical details: power consumption: 350 A Hfjdpfxsu Nwd De Am Aeh total power requirement: 17,5 kVA weight of the machine approx.: 64 kg dimensions of machine: 0,65 x 0,32 x 0,5 m Welding rectifier/inverter MIG/ MAG:40A / 14V up to 350A / 31,5 V TIG: 10A / 10V up to 350 A E-welding: 15A / 20,5V up to 350A / 34V Voltage U1: 380 - 415V Cooling type: F (water cooled) Protection class: IP 23 without hose package without grounding cable *

Condition: used, Year of construction: 1941, functionality: fully functional, turning diameter over cross slide: 500 mm, turning diameter: 860 mm, turning length: 2,500 mm, center height: 400 mm, workpiece weight (max.): 10,000 kg, spindle bore: 57 mm, total length: 5,100 mm, total width: 1,860 mm, rotational speed (min.): 6 rpm, rotational speed (max.): 250 rpm, Equipment: documentation/manual, For sale: Oerlikon DM4S conventional lathe, manufactured in 1941. Dimensions: Estimated weight: 10 tons Center height: 400 mm Footprint: 1860x5100 mm Distance between centers: 2500 mm Spindle bore: 57 mm Options: Multi-fix turrets 4-jaw chuck/faceplate Ø1050 mm Rapid traverse Many accessories… Inspection and testing possible at 1822 Chernex, Switzerland. Price: €10,000 (negotiable) Travel and transport costs are the responsibility of the buyer. More photos and videos are available upon request. Hfedpjy Tapljfx Am Ajh Please contact me for further information.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 170 kg, type of cooling: water, welding current (max.): 500 A, workpiece weight (max.): 10 kg, Equipment: documentation/manual, We offer this as-new CRP Robot / CROBOTP HY 1006A-145 + Ehave CM 500AR welding robot, manufactured in 2019. Manufacturer: CRP Robot / CROBOTP Model: HY 1006A-145 + Ehave CM 500AR Year of manufacture: 2019 Condition: as new ID Category: 905 ID Type: 1918 Machine Type: welding robot Hsdpfx Amsy S R Ebj Aefh Industrial 6-axis welding robot in excellent condition, used for approximately 3 months – almost like new. Ideal solution for companies looking to automate welding production, increase productivity, and achieve consistent weld quality. Technical Specifications Model: CRP-RH14-10-W 6-axis industrial welding robot Reach: 1450 mm Payload: 10 kg Welding source: 500 A Water-cooled torch Repeatability: ±0.08 mm Robot weight: approx. 170 kg Easy and intuitive programming Advantages ✔ High welding precision ✔ Stable and repeatable weld quality ✔ Significant increase in production efficiency ✔ Easy operation and programming ✔ Suitable for automated and serial production ✔ Machine in excellent condition The machine is fully functional and ready for immediate operation.

Condition: good (used), Merkle High Pulse 450DW shielding gas welding machine in fully functioning condition, with 6 additional packs of welding wire & including a full bottle (Argon, UN1956) Hsdpfx Asx Thqkem Ajfh

Condition: excellent (used), Year of construction: 2014, operating hours: 11,065 h, functionality: fully functional, machine/vehicle number: 03001212-03.14, The ALPHA LASER ALM 200 laser welding machine was manufactured in Germany by Alpha Laser GmbH in 2014, but it has been in operation since 2017. This mobile laser welding machine is equipped with a 200 W laser source (9kW laser beam power), enabling the repair and modification of various components such as dies, molds, injection molds, tools, and machine parts in any selected location. Welding is performed in a semi-automatic mode. The mobile laser welding system features a narrow laser head, allowing access to the interior of the welded component. It is controlled via a computer, joystick, and foot switch. The machine is in very good technical and visual condition and has been regularly serviced. The machine comes with a table. Price: 170,000 PLN net (VAT invoice provided). Technical parameters of the ALPHA LASER ALM 200 laser welding machine: – Power: 200 W – Wavelength: 1064 nm – Travel speed (X, Y, Z): 0-25 mm/s – Travel range (X, Y, Z): 140 x 120 x 1300 mm – Pulse energy: 90 J – Pulse duration: 0.5-20 ms – Pulse frequency: 100 Hz – Laser beam power: 9 kW – Laser beam diameter: 0.2-2.0 mm – Operating mode: Pulsed – Focal length: 150 mm – Power consumption: 380 V/ 50-60 Hz / 16 A/8kW – External dimensions: W-1410 x D-730 x H-1585 mm – Machine weight: approx. 320 kg – Operating hours: 11065 – Serial number: 03001212-03.14 Additional parameters and equipment of the ALPHA LASER ALM 200 laser: – Optics: LEICA microscope mount, 10x magnification, optionally 16x – Display with keyboard – Multifunctional foot switch – Joystick – Adjustable laser arm – Complete workstation with table Hfsdstqtrfepfx Am Ash – Option to purchase spare parts for the machine and accessories at a good price, e.g., lamps, hoses, wire guide holders, spheres/bases for parts, magnets, etc. – Option to purchase various types of welding wires at good prices – Option to purchase a fume extraction system

Condition: like new (used), Year of construction: 2023, functionality: fully functional, input voltage: 400 V, open-circuit voltage: 87 V, welding current at 60% duty cycle: 270 A, welding current at 100% duty cycle: 220 A, input current: 25 A, protection type (IP code): IP23, welding current (min.): 3 A, welding current (max.): 300 A, input frequency: 60 Hz, We are offering this as-new EWM Tetrix XQ 300 puls AC/DC Expert 3.0 5POL welding machine, year of manufacture 2023. Including Cool XQ 41-1 cooling module Mains voltage: 380–400 V Mains frequency: 50/60 Hz Rated current I1,max: 24.9 A Rated current I1,eff: 15.5 A Open-circuit voltage (U0): 87 V MIG/MAG welding current range: 3–300 A MIG/MAG welding voltage: 10.1–22.0 V MIG/MAG duty cycle 40%: 300 A MIG/MAG voltage at 40% duty cycle: 22.0 V MIG/MAG duty cycle 60%: 270 A MIG/MAG voltage at 60% duty cycle: 20.8 V MIG/MAG duty cycle 100%: 220 A MIG/MAG voltage at 100% duty cycle: 18.8 V Manual arc welding current range: 5–300 A Manual arc welding voltage: 20.2–32.0 V Manual arc welding duty cycle 30%: 300 A Manual arc welding voltage at 30% duty cycle: 32.0 V Manual arc welding duty cycle 60%: 260 A Manual arc welding voltage at 60% duty cycle: 30.4 V Manual arc welding duty cycle 100%: 210 A Manual arc welding voltage at 100% duty cycle: 28.4 V Protection class: IP23 Year of manufacture: 2023 Hfodpfx Aey Sxkfom Aoh If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Rowatec MM 33 -Transformer welder -Transformer on thick copper -Power 330A-60% 250A-100% -Voltage range 15.8V-33V -Current protection 22A 400V -Step voltage adjustment( 10 fine positions, 2 coarse positions) -Smooth adjustment of wire feed -Wire feed 4 rollers -Welding mode : 2 bar , 2 bar spot, 2 bar time, 4 bar , 4 bar spot , 4 bar time - Infinitely adjustable break time and welding duration Hfodpfeuyg Imsx Am Aeh -Wire discharge time after welding

Condition: excellent (used), I sell in very good condition TIG welder, L-TEC 200 DC. Price given for 1pc. Hfjdpfxoud R T Sj Am Aeh

Condition: excellent (used), I am selling a Rowatec Genesis 160 welding machine. Hedpsvzb Tvofx Am Ajfh

Condition: excellent (used), Manufacturer: REHM Model: Synergic. PRO 2 350-4 Machine condition: Very good used condition ///// Price listed is for 1 unit ///// Welding current adjustment range: 45A/16V - 450A/36.5V Weight: approx. 130kg SMC Technology – Smart Machine Control A unique step-regulated control concept developed by Rehm: The arc length is regulated not only by measuring voltage and welding current, but also by the digital determination of wire feed speed. This enables excellent welding results while keeping operation easy and safe. - SDI – Stepless Dynamic Induction Hfsdpjv Nrfxofx Am Ajh The continuously adjustable coil automatically ensures exceptional arc ignition properties and high arc stability during welding. Fine-tuning can be performed manually using the SDI knob. This allows adjustment of heat input, which can positively influence the amount of post-weld work required. - RSC – Realtime Speer Control Digital monitoring and regulation of the wire feed speed with high precision and in real time. With the use of RSC, changes in arc length are compensated for more quickly and efficiently. - CCM – Characteristic Curie Memory Built-in database of expert welding parameters. By selecting the wire type, diameter, and desired welding voltage, the system synergistically sets the optimal preset welding parameters. During operation, actual parameter values are constantly compared to the preset values, and automatically adjusted as needed. - RMI – Rehm Machine Interface The machine’s control panel is extremely user-friendly and ensures error-free selection. Simple parameter selection makes the operator’s job easier, helping to minimize mistakes and reduce setup time.

Condition: excellent (used), Possibility of simultaneous welding and plasma cutting. Output power: at 60% 400A/36V, at 100% 310A/32V. Hfjdpfxsud Rl Us Am Ash

Condition: excellent (used), I sell Esab LTG150 welding machine in very good condition. Hsdpfju Sun Eox Am Aefh

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 0000832430, total height: 976 mm, total width: 686 mm, total length: 1,152 mm, overall weight: 126 kg, No reserve price – guaranteed sale to the highest bidder! MACHINE DETAILS Adjustable welding current range: 5 A – 500 A Duty cycle at 40°C: 500 A / 80%, 470 A / 100% Open-circuit voltage: 82 V Mains voltage (factory setting): 3 x 380 V – 400 V Mains voltage (possible): 3 x 440 V – 460 V, 3 x 480 V – 500 V Mains tolerance (factory setting): -25% to +20% Frequency: 50 Hz / 60 Hz Recommended generator output: 33.2 kVA Efficiency: 90% Power consumption Pi: 26 W Cooling capacity at 1 l/min: 1,500 W Pump pressure: 3.5 bar Tank capacity: 8 l Protection class: IP23 EMC class: A Dimensions & Weight Dimensions (L x W x H): 1,152 mm x 686 mm x 976 mm Weight: 125.5 kg EQUIPMENT PM 551 W LED X M9 3 m welding torch Pivoting arm for wire feed unit B300 wire spool adapter Hfedpfx Amjy Sk Nye Aoh MIG/MAG functional torch with OLED graphic display, water-cooled Mains plug (installed) Crane frame Pressure regulator with manometer, 30 l Intermediate hose package, water-cooled, 14-pin, 95 mm, 1.8 m Intermediate hose package, water-cooled, 14-pin, 95 mm x 10 m Ground cable with clamp, 550 A / 60%, 95 mm 4 m AK300 wire spool adapter for basket spool (B300) 'blueCool' coolant for up to -10°C, 5 l

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Equipment: documentation/manual, Laser welding machines with cutting and cleaning functions from Syrex, 1.5 kW power, equipped with wire feeders. Four units for sale due to replacement with new equipment. Price per unit. Hfjdpfx Aoy R N Avjm Ash

Condition: used, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total height: 1,200 mm, total width: 730 mm, total length: 1,200 mm, input voltage: 380 V, ground cable length: 3,000 mm, overall weight: 205 kg, warranty duration: 12 months, type of cooling: water, hose package length: 5,000 mm, input current: 16 A, laser power: 3,000 W, input frequency: 50 Hz, laser wavelength: 1,080 nm, continuous power: 3,000 kW (4,078.86 HP), Equipment: documentation/manual, type plate available, Handheld Laser Welding Machine SURE3 kW – Top Technology for Efficient Sheet Metal Welding Discover the smart and powerful solution for precise laser welding: The SURE handheld laser welding system with 3,000 watts of power! Perfectly suited for demanding sheet metal processing – efficient, safe, and flexible to use. Highlights and Features: Power: 3,000 watts for the highest welding quality and speed Laser wavelength: 1080 nm, continuous operation with a modulation frequency of up to 20 kHz Handheld laser welding head – optimally positioned for comfortable operation Hfedey R I Tgepfx Am Aeh Robust housing, intelligent internal structure for maximum service life Touchscreen display for easy operation Automatic multi-function wire feed possible Safety features: Three-color alarm, safety interlocks, protection mechanism against incorrect operation Cooling via a separate water circuit with a 13-liter tank volume CE-certified components according to European standards. Your Advantages Work safely thanks to extensive protection mechanisms and alarm systems Flexible application possibilities, including automatic wire feed and robot integration Low operating costs and easy maintenance thanks to well-designed technology and durable components.

Condition: used, weight of the machine ca. 110 kg dimensions of the machine ca. 950 x 435 x 980 mm Hjdewf Rg Sopfx Am Asfh ESS's newly developed "mti inverter series" for single-phase welding equipment, , which has already proven itself thousands of times over, is now being expanded to include a three-phase system. The combination of semiconductor technology, resonant inverter circuits and classic transductor technology also offers thepossibility of integrating the respective advantages into future- orientated welding devices in this case. --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Setting range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: built-in

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced Hfsdpfswf Rg Eex Am Ash annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, Hedpfswf Rgxex Am Aefh no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with Hedpewf Rgrefx Am Asfh simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: new, Year of construction: 2023, OKIO 2000W Automatic 4-Axis Fiber Laser Welding Machine Power: 2 kW Country of Origin: China Number of Axes: 4 Travel in X-axis: 500 mm Travel in Y-axis: 300 mm Travel in Z-axis: 300 mm Worktable Dimensions: 350 mm × 450 mm Travel Speeds: Y-axis: 10 m/min X-axis: 10 m/min Z-axis: 5 m/min Positioning Accuracy: ±0.02 mm 4th Axis: Positioner Rotational Positioning Accuracy: ≤0.05 mm Power Supply: 220 V/380 V Power Requirement: 7.5 kW Machine Dimensions: 500×1400×1900 mm Weight: 280 kg Chiller Welding Source: MAX Mounting Plate, Welding Head Visual CCD Monitoring System – uses a high-resolution camera and monitor to improve welding efficiency and quality The automatic OKIO laser welding machine enables welding of metal components in straight lines, circles, and any arbitrary paths, such as those found in mobile phone housings, mobile phone batteries, sensors, medical devices, and other industries. Laser welding machines use high-energy pulsed lasers to weld objects. High energy and high laser pulse density ensure smooth welds, a narrow weld seam, and a small heat-affected zone. Hedpfx Aepq Nzasm Ajfh

Condition: excellent (used), Year of construction: 2004, Carl Cloos GLC 503 Quinto SD welding machine. A total of 4 units available. Year of manufacture: 2004-2004-1999. Price refers to 1 unit. Hodpfx Aotkuk Rom Asfh

Condition: not inspected (used), for sale in pictured condition Hodpfx Amsh Ti R Nj Asfh

Condition: refurbished (used), functionality: fully functional, input voltage: 400 V, ground cable length: 3,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 1,000 mm, welding current (min.): 60 A, welding current (max.): 450 A, Equipment: type plate available, Carl Cloos GLC 451 C - Water-cooled Mig Mag Step-controlled Specifications: Hfsdpfxsy Rqt Ae Am Aeh 60-450 AMP 380 Volt Water-cooled 30 steps adjustable 2/4 stroke 4 roller driven Adjustable burnback time Includes: Mig welding torch, earth cable with clamp, gas hose, and 10 metre intermediate package. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.