Used Welder for sale (314)

Condition: excellent (used), Ultrasonic welder, Ultrasonic plastic welder, used machine Manufacturer : Branson Type :900 AES series actuator Overall dimensions : 1200 x 810 x 2410 mm Machine dimensions : 420 x 700 x 1470 mm Control dimensions : 450 x 450 x 180 mm Weight : 167 kg Njdpfx Ajt H Nhuohvekw Frequency : 20 KHZ Power : 1000 W Maximum stroke length : 100 mm

Condition: used, MIG MAG welding machine, shielding gas welder CLOOS type GLC 357 N MIG MAG welding power source Serial no. 576 Year of manufacture approx. 1985 Rated output 350 Amp. Output 350 Amp. - 80% duty cycle 310 Amp. - 100% duty cycle Continuously adjustable output range Connection hose package: 4.5 meters Power supply: 380 Volt, 50 Hz, 32 Amp plug - 2-stroke and 4-stroke welding function - External wire feeder type CK 72 ZK with 2-roller drive and 4.5 meter hose package - 3 meter hose package with central connection and CLOOS hand torch - Water-cooled - Pressure gauge for gas cylinder Nodpshubg Tefx Ahvskw - Welding unit equipped with 1 mm welding wire Space requirements (L x W x H): 1250 x 600 x 1100 mm Weight: 260 kg Machine tested – fully functional

Condition: excellent (used), Year of construction: 2013, PRATTO equipment for zinc coated welded meshes Technical data for the machine : Nkjdoyxn Rnjpfx Ahvjw STARWELD PE is a high-performance mesh welding line for the production of fine & light mesh in rolls or rolls & sheets • 2 pay-off for feeding the cross wire • 36 pay-off for feeding the line wire • Fence dimensions between 1 and 3 m (2 types can be made simultaneous, example 1 m with 2 m, 1.5 m with 1.5 m, 1.2 m with 1.8 m) • Range of wire diameter 1.2 – 3 mm • Working speed (strokes/min) Up to 130 • Automatic stacking of rolls • ⁠PLC management

Condition: used, weight of the machine ca. 110 kg dimensions of the machine ca. 950 x 435 x 980 mm ESS's newly developed "mti inverter series" for single-phase welding equipment, , which has already proven itself thousands of times over, is now being expanded to include a three-phase system. The combination of semiconductor technology, resonant inverter circuits and classic transductor technology also offers thepossibility of integrating the respective advantages into future- orientated welding devices in this case. Nkjdpfxewf Rg Ss Ahvsw --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Setting range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: built-in

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC Njdpfxjwf Rgrj Ahvekw version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC Nkjdpjwf Rg Ejfx Ahvow --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V Nkodpfxjwf Rgxs Ahvow --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: excellent (used), Band saw welder IDEAL model BSO Nedpfx Ahsxw H Srevokw

Condition: used, MIG / MAG Pulse Gas-Shielded Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Art. No.: 4.075 Serial No.: Year of manufacture approx. 2000 Output: 330 amps = 50% duty cycle (DC) 300 amps = 60% duty cycle (DC) 210 amps = 100% duty cycle (DC) Stepless adjustment range Open circuit voltage approx. 50 V Open circuit voltage approx. 30 V Power supply: 400 V, 50 Hz, 32 A plug - Digital display for voltage and amperage - Pulse welding function - Various welding programs selectable Welding methods: MIG/MAG/TIG (programmed and manual modes) Nkjdsyv H Elspfx Ahvjw 2-stroke, 4-stroke, 4-stroke special, and spot welding - Welding control with program memory and disk drive for external program storage - Separate 4-roller wire feeder FRONIUS Type VR 152 with connecting hose package approx. 1.5 meters - 4-meter BINZEL hose package with central connection - External Fronius water cooling unit Type FK 71 - Welding gas pressure regulator - Supplied with 1.2 mm welding wire Space requirements (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition – fully functional – ready for demonstration

Condition: ready for operation (used), CEMSA welding machines all working perfectly like new year 2016 Nkedpfxjyw N Das Ahvow

Condition: ready for operation (used), DALEX welding unit CGW 405 Wire feeder DV 2.3 Nodeipvrfepfx Ahvekw Hose adapter 10 m Connector of the hose package must be re-clamped Weight 310 kg

Condition: excellent (used), MIG MAG welder EWM 421 Progress puls with intermediate hose package (approx. 15 m) for sale. 420 amp, water cooled Four-roll drive, also suitable for welding aluminum and chrome-nickel. The machine is in good condition and fully functional. MIG/MAG - impulse, MIG/MAG - standard and stick electrode - welding possible. Nkjdpfx Aein Nllshvsw Included are the welding torch and the ground cable.

Condition: good (used), Water cooled TIG welder Kjellberg KU 262 Nkodpfsg Tvvrox Ahvsw Technical data see photos Instruction manual available

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: A32404019520, type of input current: three-phase, input voltage: 230 V, overall weight: 53 kg, type of cooling: air, laser power: 1,500 W, shaft length: 1,080 mm, continuous power: 1,500 kW (2,039.43 HP), Equipment: documentation/manual, head guard, type plate available, Operation - Simplest operation via synergy characteristic curves - Achieve finished welding results in just three steps. Automatic adjustment of power, wire feed, oscillation width, oscillation frequency, laser frequency, PWM, hot start, etc. - High-resolution display ensures optimal readability of all necessary parameters. An integrated help function provides a better understanding of the adjustment options - Fully integrated operation in the wire feed cabinet – optional operation via machine or wire feed system Technical Features Nkedpeyuvktefx Ahvow - High-performance laser cells paired with gas-cooled torches ensure maximum power and focus stability - 2-in-1 machine: Welding and cleaning. Laser cleaning is ideal for paint removal, rust removal, and scale removal - Optional: Dual wire feed Safety - Two-channel emergency stop system - Two-channel safety interface for access control (door contact switch) - Key switch to prevent unauthorized use - Two-channel fiber break detection as well as monitored QBH connection - Safety notices and manual activation of laser release at every start - Dual-action button prevents unintentional activation of the laser - Suitable for heavy-duty applications Advantages of Laser Welding Compared to Conventional Welding Methods - Minimal distortion, extremely fast, outstanding quality (even with very thin materials < 1 mm) - Consumes approximately 70% less energy - Quick and easy to learn - High process reliability - Extreme time savings with significantly reduced rework - One of the lightest torches on the market, weighing approx. 680 g - Two-channel safety circuit for maximum safety Advantages of Craft-Laser - Laser cleaning with up to 100 mm scanning width and autofocus - 2-in-1 machine: welding and cleaning - Full synergy – no more parameter lists - Service-friendly – no more inconvenient shipping required

Year of construction: 1999, condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: N SERIE: 99 1220, Hot air Polypropylene box seam welder. Manually fed polypropylene welding machine. Nkodpfx Ahjw Elrpevsw

Condition: good (used), I sell Dalex- Werke PMS11-3 spot welding machine, 172KVA, in bdb condition. Nkjdpfx Ahju Sb Dtovsw

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: WG002553, Make/model: MCWEL M630 ( Miller ) Rated DC output: 26.4kW Rated current: 550A Voltage: 20 – 45V Nksdpfx Ajvznbyjhvew Current range: 55 – 550A Rated duty cycle: 60% Applicable electrode: 1.6 – 8.0mm Engine model: F3L912 Rate output: 28kW /1800rpm, 60Hz Cooling system: air-cooled environment conditions Dimension: L – 1,525mm x W – 760mm x H – 1,050mm Weight: 900kg

Year of construction: 2018, condition: good (used), Fully automatic angle sealer / Fully automatic side sealing machine Manufacturer: Diez Nedpfetzcd Sox Ahvokw Model: AWS-C 9070 CS Year of manufacture: 2018 Shrink tunnel Manufacturer: Diez Model: HTC 122-40D Year of manufacture: 2018 Operator side: Left in running direction Passage width: approx. 600 mm Passage height: approx. 190 mm Sealing length: approx. 900 mm Working height / conveyor height in-feed/out-feed: approx. 860 mm +100 Performance: Up to 30 cycles/min (depending on package size and feed speed) Connection voltage: 230V AC, 50Hz, 1Ph + N + PE Power consumption: 3.5 kW Rated current: 10 A With cable and 16A Schuko plug Compressed air connection: 6 bar External dimensions: Length: 2600 mm Width: 2000 mm Height: 1500 mm 18326ä

Condition: new, Year of construction: 2018, Automatic angle welder Manufacturer: Diez Model: AWS4535 Year of manufacture: 2018 No operating hours! Welding frame: 500 x 350 mm Njdpfxowriuue Ahvokw Belt width: 32 mm External dimensions: 170 x 130 x 135 cm 18326ä

Condition: used, Inverter Welding Machine for Manual Metal Arc Welding TECHNOLIT PROFImat 170 Plus Type MMA Welding Machine, Inverter Welding Machine, Manual Electrode Welding Inverter New – unused Serial No.: TB1703500316 Article No.: 440030 Year of Manufacture: 2022 TIG (DC) Output: 170 Amp. 45% duty cycle 150 Amp. 60% duty cycle 135 Amp. 100% duty cycle MMA Output: 170 Amp. 35% duty cycle 145 Amp. 60% duty cycle 125 Amp. 100% duty cycle Adjustment Range: 5–170 Amp. infinitely variable Power Supply: 230 Volt, 50 Hz - Hot start function (optimizes ignition characteristics, making it easier to start welding with difficult-to-ignite electrodes) - Anti-stick function (optimizes electrode control and prevents the electrode from sticking) - Arc-force function (optimizes arc stability and improves penetration) - Lift-arc arc ignition - Suitable for stick electrode welding, for all electrode types up to Ø 4 mm - Ground cable with plug connection Nkodpji E Iz Iefx Ahvow - Electrode holder with 3-meter cable and plug connection - Equipped with 230-volt Schuko plug - S-mark for welding under increased electrical hazard conditions - Overvoltage protection Dimensions (machine without cables) L x W x H: 310 x 155 x 265 mm Weight (without cables): 7 kg NEW – unused, from stock

Condition: used, Inverter welding machine for manual electric welding IMS - GYS type PROGYS FLEX 280A CEL MMA welding machine, inverter welding machine, manual electric welding inverter Serial no. IEC 60974 Year of manufacture 2020 Power with mains operation 400 Volt (40% ED) 280 Amp. Power with mains operation 400 Volt (60% ED) 200 Amp. Power for mains operation 400 Volt (100% ED) 170 Amp. Power for mains operation 230 Volt (40% ED) 200 Amp. Power for mains operation 230 Volt (60% ED) 180 Amp. Power for mains operation 230 Volt (100% ED) 150 Amp. Adjustment range 5-280 Amp. stepless Mains connection 230 / 400 Volt, 50 Hz. - Operating voltage from 110 to 480 volts alternating current - Adapts fully automatically to the existing mains supply - equipped with 16 Amp. CEE plug for 400 Volt mains voltage - Hot-start function (optimizes the ignition behaviour, simplifies the welding start of electrodes that are difficult to ignite) - Anti-stick function (optimizes electrode guidance and prevents the electrode from sticking) - Arc-Force function (optimizes arc stability and improves penetration) - Digital display - Plug socket for remote control connection - Earth cable with plug connection - Electrode tongs with 3 meter cable and plug connection - Stick electrode welding, can be used for all electrode types up to Ø 5 mm - TIG-DC welding (without TIG hosepack) - The device may be connected to a flexible three-phase power supply between 110 V and 480 V or to a fixed three-phase 400 V power supply (50 - 60 Hz) plus ground wire. This appliance may only be connected to a 3-phase power supply system with 4 conductors, where the neutral conductor is earthed. Dimensions (appliance without cable) L x W x H 470 x 270 x 430 mm Nkodovg Rh Tjpfx Ahvsw Weight (without cable) 23 kg New, unused

Condition: used, MF welding machine with water-cooled spotter Medium frequency spotter Manufacturer: TECNA (Italy) Type 3670 E CF00 Serial no.: Year of construction 2014 Rated welding power 25 kVA Max. welding power 160 kVA Power supply 400 Volt, 50 Hz Nsdpog U A Uzsfx Ahvokw - Welding controller TE750 or TE760 - Spotter for single-sided spot welds - Ideal for bodywork repair with excellent weld quality - Water-cooled type 2BHPLN - Mobile transport trolley Weight approx. 155 kg Very good condition - as new

Condition: excellent (used), Stud welder Make TRW. Nelson Type Alpha 850 YEAR OF MANUFACTURE 1995 maximum welding capacity studs up to 12 mm welding current continuously adjustable from 100 - 850 A Njdpfx Ahovcl T Aevekw supply voltage 400 Volt , 32 A Transport dimension : length 550 mm width 320 mm height 380 mm

Condition: new, Year of construction: 2026, Equipment: documentation/manual, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Nedpfxsn Sl D Re Ahvjkw

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: GA0500VBG1780, working width: 1,600 mm, wire diameter (max.): 8 mm, type of input current: three-phase, nominal power at 50% duty cycle: 100 kVA, input voltage: 400 V, air pressure: 6 bar, electrical fuse: 800 A, We are offering this used Ideal GAE 516/07-07-20 mesh welding machine, year of manufacture 2017. Manufacturer: Ideal Model: GAE 516/07-07-20 Year: 2017 Condition: used Machine type: mesh welding machine Designed for resistance welding using single-phase DC technology of shopfitting and industrial grids, wire shelves, reinforcements, and other wire products. Features: - Extension for automatic feeding of lower cross wires (4 - 8 mm) for the production of double rod mesh panels - Loading magazine for flat bars (max. 2,000 mm) - 2 notching units for trimming cross wire projections from the welded product The machine is fully operational and can be inspected under power. Nkjdsym Aqdspfx Ahvew A total of approx. 80,000 grids have been produced with the machine. Mesh width: 250 - 1,600 mm Mesh length: 450 - 2,200 mm Welding width: 1,600 mm Longitudinal wire diameter: 2.5 - 8 mm Cross wire diameter: 2.5 - 8 mm Minimum longitudinal wire spacing: 25 mm Minimum clear cross wire spacing: 10 mm Pneumatic welding cylinders: 7 units Three-phase current: 400V / 50 Hz Fusing: 800 A / phase Air pressure: 6 bar Air consumption: 20.0 Nl/cycle Cooling water consumption: 4 bar, 21-25°C, approx. 80 l/min If you have any questions or require further information, please feel free to send us a message or call us.