Welding kit

L-TEC 400

Condition: used, mileage: 226,206 km, power: 235 kW (319.51 HP), first registration: 10/1981, fuel type: diesel, number of seats: 27, gearing type: automatic, color: white, brakes: retarder, Equipment: air conditioning, bathroom, onboard kitchen, parking heater, This SG 221 HDS was originally intended for shuttle service to Southern Europe, but remained a one-off; nevertheless, it served as the foundation for two further high-deckers of a special kind: the S 215 HDS and S 216 HDS, which would soon bring Kässbohrer many new customers. Additionally, this coach introduced the 'S' designation: it stands for Super, because these new high-deckers truly lived up to their name. With a height of 3.63 meters, the elevated passenger compartment created even more space, accommodating not only more luggage (16 cubic meters) but also additional service facilities. Extra fuel tanks could also be installed without issue. Regardless of which of the two Super-Setras the bus operator chose, the engineering marvel of these two new Ulm models was that, except for the front section, they were 100% modular components from the Series 200 and shared identical bolted assemblies with other Setra touring coaches. The 216 HDS offered space for up to 16 rows of seats. In comparison, the underfloor cockpit variant provided more interior space. With the Setra SG 221 HDS, Kässbohrer had a vision, but due to the ban on running articulated touring coaches through France, they shifted focus in favor of solo vehicles. The SG 221 HDS was subsequently used as a demonstration and information bus at trade fairs and conferences; with its generously equipped kitchen on board, it became a central meeting point for representatives and customers. +++ Unique Vehicle +++ +++ATTENTION!!!!!+++ +++pure restoration project+++ +++not roadworthy / only the engine runs+++ Engine: Mercedes-Benz Mileage according to odometer Transmission: 5-speed automatic Bwodpfx Aermlp Esa Esi Seating: 24+2+1 sleeping seats ---- Safety Retarder * Fog lights Passenger compartment Stand heating * Air conditioning * Tables * Curtains * Jet ventilation * Reading lamps * Double glazing * Footrests * Tap system with bar and large kitchen in rear area * Separate bar area in the center * Lounge area at the front convertible to sleeping area * Refrigerator + additional * Microwave * Rear WC * Driver microphone Exterior Power steering * Tachograph with disc * Sleeping cabin * Driver door * Roof hatches/fans/roof ventilator Other German vehicle documents * Vehicle dimensions: length 18.00m, width 2.50m, height 3.95m * Twin tires * Tires: Front axle approx. 40% Our internal vehicle number: 7271 Subject to errors. Pictures and text may differ from the actual vehicle. Over 180 vehicles always in stock.

Condition: new, machine/vehicle number: 1, empty load weight: 10,200 kg, maximum load weight: 28,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,550 mm, loading space height: 850 mm, suspension: air, tire size: 245.70 r 17.5, color: dark red, Year of construction: 2021, Equipment: ABS, sem factory new ceylan trailer, 3 axles with 1st liftable and 3rd steerable, abs, lower part platform 10m long x 85cm high from the ground, total 13.70m, side decks, side wideners, rud hooks 10 ton each1, double full-side electro hydraulic ramps, electric winch setup, WARRANTY- READY FOR DELIVERY SAVE THE SALE, INTERDRIVE SRL-PARMA Bjdpfxsilglns Aa Eswi

Year of construction: 2021, condition: excellent (used), Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment dimensions: height tilted min: 800mm height tilted max: 1900mm height horizontal min: 1050mm height horizontal max: 2000mm diameter of the clamping disc 1500mm length 2900mm, width 1400mm Bwedpfxom Ew Ste Aa Eei weight 3200 Kg speed from 0,01 to approx. 0,7 rpm.

Condition: used, 4,000 running meters of construction profiles, C-shape galvanized Bwjdpfx Aajur Ikrs Eji Used goods, good condition, see pictures Length per piece approx. 12m Profiles 110x90mm Material thickness approx. 3mm Negotiated price: € 4.90/running meter net from stock Goods are in stock. Transportation and installation possible on request. Viewing possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock).

Condition: excellent (used), Year of construction: 2007, operating hours: 1,154 h, For sale fully functional and ready for further work mini chain excavator so-called Trencher from one of the best companies on the market, which is Vermeer. We have many machines and devices from this manufacturer, we service them on site. We offer all kinds of machines that help in work in gardens, etc. Vermeer RTX100 is ideal for making strips for cables or pipes. Thanks to the saw that is installed, it is possible to dig up to a meter. The last service of the machine was at 1148mth, so relatively recently. Engine: Kohler CHL15 15 HP Single Cylinder Gasoline Capacities Fuel Tank: (6.1 l) Hydraulic Tank: (37.8 l) Hydraulic System: (39.7 l) Engine Oil: (1.13 l) Hydraulic System Pump Type: Tandem Piston Pump Ground Drive gpm @ Max Engine RPM: (20.4 l/min) Implement Pump gpm @ Max Engine RPM: (41.6 l/min) Ground Drive Ground Drive Type: Hydrostatic Maximum Forward Transport Speed @ Full Throttle: (64 m/min) Maximum Reverse Transport Speed @ Full Throttle: (25.9 m/min) Steering Type: VZ Steering Trench Excavator Boom Length: (91.4 cm) Cutter Width: (15.2 cm) Auger Diameter: (40.6 cm) Auger Outer Bearing Support: Standard Crusher: Optional Safe Strap: Standard Shipping Dimensions: Bwodpfx Aowbtytja Eji Weight (Basic Tractor with Tires): 910 lbs (412.7 kg) Length (Basic Tractor): 81.4" (206.7 cm) Width (Basic Tractor with Tires): 35" (88.9 cm) Height (Basic Tractor with Tires): 46" (116.8 cm) Wheel Tread from Axle Centerline: 34.2" (86.8 cm) Tread Width (tires): 8.5" (21.5 cm) Track contact length: 19" (48.2 cm) Track width: 7" (17.7 cm) Note! The price is in net value For Export and for companies to deduct VAT, net values apply. For individual customers, a discount is possible - We invite you to contact us directly by phone to get your best price :)

Condition: excellent (used), power: 505 kW (686.61 HP), fuel type: diesel, color: yellow, Year of construction: 2009, operating hours: 17,863 h, Year of manufacture: 2009 Drive: Wheel CE marking: yes Technical condition: very good Visual condition: very good Price: On request Bsdeuu Dipopfx Aa Eewi

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, overall weight: 9,040 kg, The compact screening plant is equipped with a powerful 2-deck screen box. The hydraulically folding conveyor belts and the unique compact design make it possible to it, that the screen can be folded up and transported very easily. The aggressive screen box can process up to 180 tons / hour and can be used for a wide range of applications. of applications including recycling, demolition, crushed stone, sand and gravel, soil and compost. compost. The simple drive unit and hydraulics result in easy maintenance, operation and maintenance. Technical description: * Deutz engine * Dimensions feed hopper: 2200 x 1200 mm * Dimensions upper screening deck: 2865 x 1200 mm * Dimensions lower screen deck: 2430 x 1200 mm * Key start * Simple hydraulics * Conveyor belts for fine and medium-fine products * Discharge conveyor for oversized products * Webtec for controlling the belt speed Bsdsum I Hpjpfx Aa Eewi * Screen mesh - 1 set of desired screen mesh / several combinations available * Weight: 9,040 kg * Transport dimensions: 8000 x 2200 x 2700 mm (lxwxh) * 1 year warranty from start of operation

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. Bwedpfsiklxbex Aa Eei We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Feel free to contact us.

Condition: used, Year of construction: 2003, operating hours: 23,000 h, Equipment: all wheel drive, Liebherr 924 !!! SPECIAL EXCAVATOR FOR FOREST/WOOD !!!! built in 2003 23000h New pump with invoice 16200¤ New engine with invoice 17700¤ 16ton winch with RADIO Balloon tires Hiab wood tongs built in 2016 Tel: We do your financing or leasing Sale EU: net after presentation of company documents and tax/VAT number Sale outside EU: deposit 500¤ we speak English Bodovm N Dgspfx Aa Eewi govorimo srpsko-hrvatski our service for you:* Export papers and EUR1 * Customs license plate Transport worldwide * Accommodation options Transfer Munich airport or Passau train station Tel:

Condition: used, L-TEC Inverter TIG Welding Machine Type Inverter TIG 200 DC TIG welding machine for direct current (DC) Serial No. 184548 Year of manufacture: approx. 1994 Output: 200 amps = 60% duty cycle 155 amps = 100% duty cycle Adjustment range: infinitely variable Current type: DC (direct current) Mains connection: 400 Volt, 50 Hz, 32 Amp plug - 4-meter hose package with central connection and hand torch - with remote potentiometer (foot switch) Bsdpfx Asdzqb Esa Eswi - gas pressure regulator - DC only - HF ignition Space required (L x W x H): 850 x 480 x 740 mm Weight: approx. 150 kg The welding test shows very good results when welding stainless steel with direct current. Overall in good condition.