Condition: ready for operation (used), Steel Apron Conveyor with Hopper ABM / Bergeaud Brand: ABM / Bergeaud Cjdpfx Acow Iyzcsyehd Dim. Steel Apron Conveyor: A-A length 10.000 mm, Beltwidth: 860 mm Driving: E-motor 7,5 kW Dim. Hopper: Length 3000 mm – width 2400 mm. Height = 1100 mm leading to 900 mm. Weight appr. 19 Tons.

Condition: excellent (used), Year of construction: 2017, operating hours: 19,187 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, overall weight: 52,000 kg, Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 140 Year of construction 2017 Working hours 19,187 hours, stand October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 4,34 m³ Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Connected load 226 kW Full load current 428 A Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 800 up to 1300 kg, depends on material and bale lenght SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., type) Schneider MAGELIS Touch Baler dimensions built up with hopper 13,200 x 27,000 x 7,344 mm (l x w x h) Transport dimensions only baler 13.200 x 2.750 x 3.450 mm (l x w x h) Machine weight baler approx. 52 tons Technical data chain belt conveyor: Manufacturer Bollegraaf Typ HBT 1216 Year of construction 2009 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Weight 16 t Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Comments: The press is currently in operation and is to be replaced by a new machine in the 2nd quarter of 2026. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Chsdpfx Asxrta Eocysd

Condition: good (used), Year of construction: 1992, Roller compactor, packing station, garbage compactor, garbage press, press container, garbage container, self-compactor, waste compactor, paper compactor, paper container, cabinet press, vertical baler, cardboard reducer, paper baler, rotating waste compactor -Manufacturer: Bergmann, paper baling press -Type: PS 8100-38 -Waste compactor: with rotating compaction unit -Advantage: It can be filled continuously -Drive power: 2.02 kW -Filling opening: 1190/990/H670 mm -Bale volume: 1 m³ -Transport dimensions: 1600/1200/H2200 mm -Weight: 898 kg Cedpfx Ajxrpi Aecyjhd

Condition: good (used), 2 pieces of screw conveyors length each 5.7 m, screw diameter 25 cm Chodexrl E Hepfx Acyjd 1.200 EUR per piece

Condition: ready for operation (used), Vibrating Chute Zippe Cjdpfxow Rudwo Acyehd Dim: length 1000 mm – width 1000 mm, Driving with two pieces vibration motors of each 0,9 kW

Condition: ready for operation (used), Conveyor type Westeria with legs good condition Cedsxrl Etepfx Acyshd Length 6 m, belt width 1.6 m ready to go

Condition: ready for operation (used), Binder Bivitec Screening machine Brand: Binder Cjdpew Uqhtefx Acyshd Type: Bivitec flip flop Surface: 9500 x 1900 mm – 1 Deck Driving: E-motor 30 kW

Condition: good (used), covered conveyor Csdpexrl Eyjfx Acyehd length 8.5 m, width 80 cm FOR SALE FOR LOW PRICE.

Condition: ready for operation (used), Tail- and drivedrums: Nr.1 drivedrum: Drumlenght 750 mm- Drum Ø 650 mm- Axislenght 1370 mm- Axis Ø 80/70 mm- Bearings. Nr.2 taildrum: Drumlenght 750 mm- Drum Ø 500 mm- Axislenght 1150 mm- Axis Ø 70 mm- Bearings. Nr.3 drivedrum: Drumlenght 750 mm- Drum Ø 650 mm- Axislenght 1570 mm- Axis Ø 125 mm- Bearings. Nr.4 taildrum: Drumlenght 1150 mm- Drum Ø 520 mm- Axislenght 1550 mm- Axis Ø 100 mm- Bearings. Nr.5 taildrum: Drumlenght 950 mm- Drum Ø 630 mm- Axislenght 1290 mm- Axis Ø 100 mm- Bearings. Nr.6 drivedrum: Drumlenght 750 mm- Drum Ø 650 mm- Axislenght 1370 mm- Axis Ø 80/70 mm- Bearings. Nr.7 taildrum: Drumlenght 1300 mm- Drum Ø 630 mm- Axislenght 1870 mm- Axis Ø 160 mm- Bearings. Nr.8 taildrum: Drumlenght 950 mm- Drum Ø 650 mm- Axislenght 1350 mm- Axis Ø 110 mm- Bearings. Nr.9 taildrum: Drumlenght 750 mm- Drum Ø 600 mm- Axislenght 1150 mm- Axis Ø 110 mm- Bearings. Nr.10 taildrum: Drumlenght 1150 mm- Drum Ø 520 mm- Axislenght 1610 mm- Axis Ø 90 mm- Bearings. Nr.11 taildrum: Drumlenght 1150 mm- Drum Ø 520 mm- Axislenght 1610 mm- Axis Ø 90 mm- Bearings. Nr.12 taildrum: Drumlenght 750 mm- Drum Ø 520 mm- Axislenght 1150 mm- Axis Ø 90 mm- Bearings. Nr.13 taildrum: Drumlenght 750 mm- Drum Ø 490 mm- Axislenght 1150 mm- Axis Ø 90 mm. Nr.14 taildrum: Drumlenght 750 mm- Drum Ø 490 mm- Axislenght 1150 mm- Axis Ø 90 mm. Nr.15 taildrum: Rollengte 750 mm- Drum Ø 520 mm- Axislenght 1130 mm- Axis Ø 70 mm- Bearings. Nr.16 taildrum: Drumlenght 1100 mm- Drum Ø 650 mm- Axislenght 1700 mm- Axis Ø 130 mm- Bearings. Nr.17 drivedrum: Drumlenght 750 mm- Drum Ø 650 mm- Axislenght 1750 mm- Axis Ø 70 mm- Bearings. Nr.18 taildrum: Drumlenght 950 mm- Drum Ø 630 mm- Axislenght 1470 mm- Axis Ø 120 mm- Bearings. Nr.19 drivedrum: Drumlenght 950 mm- Drum Ø 670 mm- Axislenght 1720 mm- Axis Ø 100 mm- Bearings. Nr.20 taildrum: Drumlenght 1300 mm- Drum Ø 630 mm- Axislenght 1870 mm- Axis Ø 160 mm- Bearings. Nr.21 taildrum: Drumlenght 1150 mm- Drum Ø 600 mm- Axislenght 1650 mm- Axis Ø 125 mm- Bearings. Nr.22 taildrum: Drumlenght 1300 mm- Drum Ø 630 mm- Axislenght 1870 mm- Axis Ø 160 mm- Bearings. Nr.23 taildrum: Drumlenght 1150 mm- Drum Ø 600 mm- Axislenght 1650 mm- Axis Ø 125 mm- Bearings. Nr.24 drivedrum: Drumlenght 950 mm- Drum Ø 540 mm- Axislenght 1900 mm- Axis Ø 120 mm. Nr.25 taildrum: Drumlenght 1150 mm- Drum Ø 500 mm- Axislenght 1550 mm- Axis Ø 100 mm- Bearings. Nr.26 taildrum: Drumlenght 1300 mm- Drum Ø 630 mm- Axislenght 1870 mm- Axis Ø 160 mm- Bearings. Nr.27 taildrum: Drumlenght 1300 mm- Drum Ø 630 mm- Axislenght 1870 mm- Axis Ø 160 mm- Bearings. Nr.28 drivedrum: Drumlenght 750 mm- Drum Ø 650 mm- Axislenght 1580 mm- Axis Ø 120 mm- Bearings. Csdpfx Ajvaqzyscyehd Nr.29 drivedrum: Drumlenght 750 mm- Drum Ø 530 mm- Axislenght 1290 mm- Axis Ø 60 mm- Bearings. Nr.30 drivedrum: Drumlenght 750 mm- Drum Ø 660 mm- Axislenght 1360 mm- Axis Ø 70 mm- Bearings.

Condition: good (used), 2 pieces of conveyors for sale each 3.5 long, 1.6 m wide Cedpfexrl Emex Acyehd ready to go 1650 EUR per piece

Condition: used, Year of construction: 2006, SHREDDER TYRANNOSAURUS 9904 IN IN GOOD CONDITION FOR SALE. THE BIGGEST SINGLE-SHAFT-WASTE-SHREDDER OF THE WORLD. WEIGHT APPROX. 70 TONS. Technical Data: REXROTH-hydraulics power pack: 525 kW two hydraulic motors are installed at both ends of the rotor Codpfxoxrl Eao Acyjhd Rotor Diameter 1 000 mm Rotor Length 3 200 mm Rotor Knives 139 pieces, turnable fur multiple use Counter nnife cassettes 4 pieces, working separately Counter knives 24 pieces, turnable fur multiple use Screen 4 segments, opening separately when foreign pieces coming in the machine Hydraulic pusher Dimensions of the machine: - Length 6 550 mm - Width 6 800 mm - Height 3 610 mm Total weight approx. 70 tons This advertisement is showing photos of the machine as it is and example picture for illustration purpose. The machine is dismantled on stock. More information could be send on request.

Condition: reconditioned (used), Year of construction: 1997, operating hours: 6,429 h, JENZ AZ 50 The machine is partially refurbished and offered at an attractive price. The engine and rotor are running perfectly. Videos can be provided upon request. Full documentation is available. The following work has already been carried out: - Panels overhauled and newly painted - Minor welding work - Water cooler replaced The following work still needs to be completed: - Remaining welding work - Welding the exhaust line - New bearings for the plate conveyor - Painting of machine chassis - Complete assembly Cedoxrl D Nepfx Acyshd - Checking the radio remote control

Condition: used, SHREDDER KOMPTECH TERMINATOR 5000 E 200kW electric including control cabinet fully overhauled new knives new cooling unit Codpsxrl A Sefx Acyjhd READY TO GO

Condition: good (used), Komptech Terminator 3400 SE 160 kW full set with electrical cabinet Chodpfxoxrl A Es Acysd FOR SALE FOR LOW PRICE

Condition: good (used), functionality: fully functional, SHREDDER Type Hammel 850 E - 2 x 110 kW - with outlet conveyor and magnet Cedpoxrl Alefx Acyehd - with new belts for outlet conveyor and magnet

Condition: ready for operation (used), Year of construction: 2008, - Shredder EUREC S 20.00 D Chsdpfx Aoxrl Afecysd - year of manufacture 2008 - low hours - good working condition - with wireless remote control and spare parts

Condition: refurbished (used), operating hours: 8,000 h, FULLY OVERHAULED-----READY TO WORK GOOD MACHINE FOR LIGHT SCRAP AND NEN FERROUS METALS ONLY 6500 HOURS HAMMEL 750 E - Power 2 x 110 kW electric - with long discharge conveyor Cedoxrlz Uepfx Acyshd The following work has been done: - 2 pieces hydraulic motors were overhauled - 2 pieces hydraulic pumps were overhauled - new cooler fan installed - neu rubber belt for the conveyor installed - new drive drum for the conveyor installed - Service done with oil change The machine can be seen in working condition on our site at D-59329 Wadersloh.

Condition: ready for operation (used), Electric Trommel Screen Type NEUSON TS 5220 READY TO USE Cedpfsxrlzzox Acyshd - trommel 5150 x 2000 m - mesh size 30 x 30 mm - with feeding hopper for sale for low price

Year of construction: 2025, condition: new, WE DELIVER TROMMEL SCREENS FOR ALL KOMPTECH MODELS: - PRIMUS - MAXX - MUSTANG - NEMUS - CRIBUS Chedpfx Aexrlzuecyod - OTHERS SHORT DELIVERY TIME ASK FOR OFFERS NOW

Year of construction: 2025, condition: new, New trommel for Komptech Maxx. Chedpjxrlznsfx Acyed Mesh size square offset 25 x 25 mm. Steel thickness 8 mm. READY FOR DELIVERY.

Condition: good (used), Tromel screen in good working condition - Tromel dimensions 7000 x 2500 mm - the tromel is segmented in 2 areas for screening of fine fraction 18 x 18 mm and fraction 160 x 160 mm - the screen plates are screwed, could be changed Cedpfx Ajxrlzbscyjhd ready for delivery

Condition: used, Year of construction: 2016, For the unloading, dosing and pneumatic transportation of different bulk materials Cjdpfsxrly Djx Acyohd like RDF, SRF, wood chips, animal food etc. consisting of: - 1 piece of unloading station level sensors and volumetric dosing - hydraulics for automated unloading of moving floor trailers - chain conveyor for discharge of the material - rotary valve for pneumatic dosing - blower for pneumatic dosing More information and pictures can be sent on request.

Condition: good (used), Paper Cardboard Sorter type BRT - good condition Chjdpfx Acjxrlyweyjd FOR SALE FOR LOW PRICE

Condition: reconditioned (used), Year of construction: 2015, - complete unit - conveyor 2400 mm wide - separation hood - BLOWER FOR FILM SORTING Chodpfx Aexrlxyocyed - OVERHAULED IN OUR WORKSHOP AT D-59329 WADERSLOH - ALL MANUALS INCLUDED - YEAR OF MANUFACTURE 2015

Condition: good (used), Year of construction: 2014, CUTTING MILL TYPE PALLMANN PS-H 1000 x 1400, 132 kW Chodpsxrl Dvefx Acysd very good condition with 3 sets of rotor and stator knives with 2 sets of screens, 5 and 8 mm with electrical cabinet AVAILABLE AND READY TO WORK