Used Pottinger Novadisc 265 for sale (799)

Condition: good (used), functionality: unexamined, machine/vehicle number: VBP00065013000009, Year of construction: 2021, The PÖTTINGER TERRASEM V 6000 DZ is a modern universal seed drill designed for precise sowing of cereals and cover crops, with the option for simultaneous fertilizer application. It is part of the TERRASEM series from the manufacturer Pöttinger. Basic Information: Type: Combined seed drill (seedbed preparation + sowing combination) Production: approx. 2021 – present Redpfx Aaoy Em H Ushew Application: Conventional, minimum tillage, and no-till systems Option: Sowing + fertilizing ("DZ" version = dual hopper / dual system) Technical Specifications: Working width: 6 m Transport width: 3 m Number of rows: 48 Row spacing: 12.5 cm Press wheel diameter: approx. 380 mm Hopper capacity: up to ~5600 L (split, e.g. 40:60) Required tractor power: approx. 180 – 250 HP

Condition: used, machine/vehicle number: 22031, Vertikale Ballenpresse / Vertical Waste Baling Press Pöttinger MP 600 ASerial-No. 5110176 Einfüllhöhe / Loading High max. 1070mm Einfüllöffnung / Filling opening 700 x 500mm Presskasten / Pressing box 700 x 500 x 900mm Ballenformat / Bale format max. 700 x 500 x 500mm Ballengewicht / Bale weight 40 - 80Kg Anzahl Umreifungen / Vertical binding 2 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Rjdpfeiiv S Sex Aahsw On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2008, Quick blade change / Rjdpjt A Smxsfx Aahjw

Condition: used, Year of construction: 2013, Working width 8.76 - 9.56 m hydr. edge protection folding hydr. support pressure control / quick blade change Parking supports Operation Power Control PTO shaft / Redpjt Sr R Aefx Aahew

Condition: used, Year of construction: 2010, First registration: 07.05.2010 / _____ / PTO shaft 540 rpm / lower link pin KAT II / hydraulic reverse swing / drive speed 540 rpm / drum mower with center suspension / Rsdpfjqrruxex Aahew

Condition: used, functionality: fully functional, machine/vehicle number: 906xxxxx, Year of construction: 2022, operating hours: 265 h, load capacity: 1,400 kg, lifting height: 5,350 mm, free lift: 1,761 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, fork length: 1,150 mm, empty load weight: 1,156 kg, total length: 1,916 mm, drive type: Elektro, construction width: 800 mm, High-lift pallet truck Chassis number: 906xxxxx Load center: 600 Mast type: Triplex Transmission: AC impulse Condition: Refurbished, no warranty Technical condition: very good Front tire type: Polyurethane Front tire size: Load roller, polyurethane, single Rear tire type: Polyurethane Rear tire size: Drive wheel, polyurethane Battery voltage: 24V Battery capacity: 250Ah Rodozh Rmnepfx Aahow Battery manufacturer: Jungheinrich Battery type: PzS Battery year of manufacture: 2022 Description: Serviced, technically and visually refurbished, inspected according to UVV regulations, without warranty/liability for defects Impulse control, full free lift, CE certificate, lifting and lowering on both sides, display with discharge indicator and hour meter, ignition switch, turtle speed button, battery (04/2022) with Aquamatik, external charger included.

Condition: used, Jungheinrich EJC 14 Lifting ant no. 265 Stroke: 2900mm Rated load capacity: 1400 kg Operating hours: 3389 h Further technical data see pictures. (Changes and errors in the technical data, information Redpfsuuy Rpex Aahow are reserved) We are happy to organize a cost-effective forwarding agent for you. organize! You are welcome to come by for a viewing. You will receive a proper invoice. Foreign customers can also receive a net invoice. can also be issued. Prerequisite is a valid VAT number. Subject to prior sale. Company names and trademarks are the property of their respective owners. and serve only to identify and describe the products. The design and electrical connection of the machine / The installation and electrical connection of the machine/device must be carried out by a trained specialist. checked.

Condition: good (used), Upper support Base plate 300 x 320 mm Rsdpfx Aasb E Nw Iehsw Bolt circle 265 mm in diameter Centering flange 100 mm in diameter Distance from base plate to steel holder: 185 mm

Condition: used, Year of construction: 2010, Year of manufacture: Nov 2010 Rodsxvx Ipspfx Aahew GOODYEAR TIRES IN GOOD CONDITION FOR MEGA OR LOWLOADER.

Condition: used, Year of construction: 2024, operating hours: 1,800 h, maximum speed: 50 km/h, front tire size: 600/70 R30 | 0%, rear tire size: 710/70 R42 | 0%, tire size: 710/70 R42, number of beds: 43, Tires (front): 600/70 R30, Tires (rear): 710/70 R42, Operating hours: 1800, Initial registration: 02/02/2024. Basic equipment/technical data: Rjdpfxezdmtvs Aahjw ENGINE: Max. power: 195/265 kW/hp (ISO 14396) Max. torque: 1200 Nm Maximum power with power management: 209/285 kW/hp Max. torque with power management: 1257 Nm 6 cylinders, 7.4l AGCO Power - 74 LFNT-5D, CR, 4V Emission standard (DOC+SC+SCR) without exhaust gas recirculation, Stage 5 Electronic engine control with Vistronic fan control Engine speed memory Powercore engine air filter with coarse dirt pre-separation EasyCare cooler package Additional fuel pre-filter with water separator 500-liter fuel tank

Condition: good (used), Year of construction: 2005, Truck-mounted aerial platform – Ruthmann T 265 Manufacturer: Ruthmann Model: T 265 Year of manufacture: 2005 Technical data Working height: 26.40 m Platform height: 24.40 m Lateral reach: 17.20 m Slew range: 450° Basket arm swivel angle: 200° Total weight: 7,490 kg Length: 9.35 m Width: 2.51 m Overhead clearance: 3.55 m Working platform size: 1.70 m x 1.00 m Platform load capacity: 350 kg Outriggers: Horizontal/Vertical Outrigger spread: 4.40 m on both sides / 3.45 m on one side / 2.50 m in profile Drive: Diesel Redpfx Aogy Tu Ioahsw Special equipment 220 V connection to the working platform Water/air pressure line to the working platform Platform exchange system Platform rotation +/- 45° Cab roof protection Driver's license class: 3 / C1 Dates/Status TÜV (technical inspection): valid until 01/2027 UVV (accident prevention regulations): valid until 11/2026 Mileage: 197,268 km as of 11/2025 Price quoted plus statutory VAT. Are you interested? We are always happy to assist you! You can reach us from Monday to Friday between 7:00 a.m. and 4:00 p.m.! Subject to changes and errors.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: type plate available, PRICE REDUCED by 2,000 EUR!!! Now 17,500 EUR instead of 19,500 EUR!!!!! Taylor Hobson Talyrond 265 roundness measuring system. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. It is certainly also of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing what it looks like, except for the computer. A newer, smaller form factor HP computer is included. Max. diameter 350 mm Max. test piece height 500 mm (higher measurements are possible, up to a maximum of 1000 mm when measured in two parts, half and half...) Self-centering of the workpiece +/- 5 mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The original owner, from whom I bought it, was an implant company in Hamburg. It was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2002 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password). Accessories are included, such as the original Taylor-Hobson desk, computer, monitor, and seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets via a shipping company. It is already well secured on the pallets. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and secured with stretch film to provide extreme protection during transport. The system itself is fixed with "transport safety screws." Shipping costs within Germany are included; I will cover them! So, within Germany: FREE SHIPPING! The measurement system should definitely be set up and commissioned by a Taylor Hobson service technician, who will then also recalibrate the system on-site. This is now recommended after a few years. Mistakes can be made during setup and commissioning. For example, some locking screws are installed for transport; if you forget to remove them, the system may be damaged when it starts up. Rjdpfxjzcqy Ee Aahsw This is a truly well-maintained, very accurate system that will continue to provide excellent service for many years to come!

Condition: used, functionality: fully functional, tire size: 265/40 R22 106V, Equipment: summer tires, For sale: 4 summer tires mounted on POLESTAR alloy wheels. PIRELLI P-ZERO 365/40 R22 106V Tread depth: 5-6 mm. Redpfx Aozck E Ueahew

Condition: good (used), Clamping angle, clamping aid Redpjy Iwp Eofx Aahjw -Clamping angle: for workpiece clamping -Wall thickness: 31 mm -Dimensions: 265/150/H200 mm -Weight: 18.7 kg

Condition: used, functionality: fully functional, Lanico DT 265 Automatic can seamer 153 mm complete Rjdoxupn Rjpfx Aahow

Condition: excellent (used), axle configuration: 3 axles, first registration: 09/2008, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, total length: 14,000 mm, total width: 2,600 mm, wheelbase: 8,860 mm, color: other, Year of construction: 2008, WKESD00000412431 Cool unit brand: Carrier = More information = Empty weight: 8.800 kg Carrying capacity: 32.200 kg Rsdpfx Aajymryhjhow GVW: 41.000 kg Cooling engine: diesel and electric Technical condition: very good Visual appearance: very good Registration number: OK-72-NX = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns, with 4-digit code -Mounting: Bolt Ø 38 mm -Die stamp: see photos -Dimensions: 450/265/H305 mm Redohb N Atjpfx Aahow -Weight: 94 kg

Condition: good (used), Dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Radial fan blower, without drive -Type: Fan wheel Ø 265 x 35 mm -Drive shaft: V-belt pulley Ø 75 mm, see photos -Inlet connection: Ø 95 mm -Outlet connection: Ø 95 mm -Dimensions: 355/200/H490 mm Rjdpfjx S Einjx Aahow -Weight: 7 kg

Year of construction: 1995, condition: ready for operation (used), A placement line with three (3) Zevatech/Juki placement machines, one (1) Zevatech/Juki tray changer and one (1) DEK screen printer is available. 1) 2x Zevatech/Juki FS730, year of manufacture: 1995, max. placement capacity: 3000/h, placement modules: 4, placement accuracy: +/-0.01mm, changeover time: 0.7s-1.1s. 2) Zevatech/Juki FM740, year of manufacture: 1997, max. placement capacity: 10000/h, placement accuracy: +/-0.05mm, board dimensions X/Y: 400mm/350mm, feeder inputs: 80/8mm, placement modules: 2. 3) Tray changer Zevatech/Juki TR4NEZ, year of manufacture: 1995. 4) SMD screen printer DEK 265, year of manufacture: 1995, printing process: Stencil printing, max. PCB size: 450mm/340mm, printing accuracy at 6 Sigma: +/-12.5µm, max. PCB thickness: 6mm, dimensions X/Y/Z: approx. 1400mm/1600mm/1500mm, weight: approx. 900kg. All machines are part of a complete system and are controlled by the same PC. On the screen printer, the front squeegee axis amplifier board is defective. Documentation available. Rjdpfx Aaotz Di Nohjw

Condition: good (used), Telecentric lighting, LED lighting, telecentric lens, measuring lens, industrial camera -Manufacturer: Basler, Operator Panel from printing machine OMSO Novadisc 4 3S UV -Type: TM-6CN -Lens: Schneider XNP 1.9/35-0501 Rjdowz Ianopfx Aahjw -Dimensions: 600/80/H100 mm -Weight: 2.5 kg

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape Rodpfx Aajlw Azbehew -Manufacturer: Erge, heating tape heating sleeve -Type: Ø32 x 265 mm, see photos -Item no.: 832 597 65 -Heating power: W -Voltage: V -Number: 2x heating tape available -Price per piece -Dimensions: 270/140/H50 mm -Weight: 1.1 kg/pc.

Condition: used, Magnetic drill, hand drill Rjdpfx Aaefc R D Aehjw -Magnetic base: Magnetor type PS 32 L -Drilling machine: AEG type HBE-IV - Recording: MK2 -Max. Drill: Ø 23 mm -Connection: 265V/200Hz -Dimensions: 700/300/H670 mm -Weight: 49 kg

Condition: used, Braking resistor, charging resistor, damping resistor, filter resistor, braking chopper Redpjq Untrefx Aahjw -Manufacturer: SEW Eurodrive, braking resistor type BW 072-003 -Item number: 802 265 8 826 058 3. -Power: 75 Ohm/250W -Quantity: 1x resistors available -Dimensions: 110/80/H15 mm -Weight: 0.3 kg

Condition: used, 2 column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punching tool: 2 columns, Ø 10/14/10 mm -Punching dimensions: see photo with dimensions -Dimensions: 265/105/H150 mm Rsdpfeu I Hptsx Aahsw -Weight: 11.7 kg

Condition: used, Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 1000 x 265 mm -Total height: 70 mm -Struts: wall thickness 2/2,5 mm -Bridge height: 30/10 mm Rsdpfx Aasrrzc Ejhew -Gratings: Hot-dip galvanized -Quantity: 3x grids available -Price per piece -Weight: 7,7 kg/piece