/ year of construction: March, 2003 / CE-conform / completely cleaned and technically checked by us / pressing force: 16 tons / pressing time: ca. 22 seconds / filling opening: 56 x 113 cm / bale weight: ca. 110 - 200 kg, depending on material / bale dimensions: ca. 113 x 73 x 70-100 cm / speed: ca. 4 - 8 bales/hour (according to manufacturer)
Xzv80blz
Big baler, channel baler, garbage press, baler, paper press,
-Main drive power: 90 kW 30 kW
-Pressing force: 88 t
Ddjomkv
-fully automatic pressing
-fully automatic wire strapping
-Bale / duct cross-section: W x H 1,100 x 750 mm
-Bale length adjustable in 4 steps: 600 - 1,200 mm
-Bale weight at 1,200 mm length: approx. 500 - 800 kg
-cycle time: approx. 9.8 sec
-Throughput depending on density: 5.50 to 16.50 t / h
-Material types: PE film, PET bottles, cardboard, textiles, garbage
-In...
HSM 500.1 VL (No.C) vertical bale press, 7,5 Kw, press power 50 t, constructed in year 2001, feed channel 1.150 x 565 mm
Technical specifications
Manufacturer HSM Pressen, Germany
Type 500.1 VL
Serial No. 220123656
Int.-No.C
Year of construction 2001
Pressing power 50 t
Drive power 7,5 kW / 400 V / 50 Hz
Connection CEE 32 A / 6h
Xrvwoqr7
Feed channel 1.150 x 565 mm (w x h)
Loading height 1.090 mm
Max. bale size approx. 1.200 x 800 x 1.000 – 1.200 mm (w x d x h)
Bale weight approx. 380 – 500 kg...
baller press in good condition, for sale or to change for truck crane like Palfinger 32.000 ad up, with truck or only crane
Pvm7oq
Axles 2
size of tire 520/50-17
Gdidx7xfg
computer with terminal 1
duct size min. 1200x700 mm
allowable maximum weight 9,9 T
Horizontal Baling Press HSM HL 4010
Used machine - Maintained by an authorized service center.
Economical solutions for stores and retail chains, guaranteeing savings in space and money.
Small building area
For crushing cardboard
Large filling opening and electro-hydraulic pressure unit for large cartons
Convenient filling with the tipper
The container is fixed by a magnet and the position is monitored by a sensor
Adapted to continuous loading
E9arkrf
The hydraulic counter-plate allows for co...
/ year of construction: September, 2002 / CE-conform / completely cleaned and technically checked by us / pressing force: 16 tons / pressing time: ca. 22 seconds / filling opening: 56 x 113 cm / bale weight: ca. 110 - 200 kg, depending on material / bale dimensions: ca. 113 x 73 x 70-100 cm / speed: ca. 4 - 8 bales/hour (according to manufacturer)
Qtz0lxy
Large document shredder with hydraulic baling press and bank equipment
Bno0o2bro2
HSM 500.1 VL (No.B) vertical bale press, 7,5 Kw, press power 50 t, constructed in year 2002, feed channel 1.150 x 565 mm
Technical specifications
Hdi2i0z7u
Manufacturer HSM Pressen, Germany
Type 500.1 VL
Serial No. 230014251
Int.-No.B
Year of construction 2002
Pressing power 50 t
Drive power 7,5 kW / 400 V / 50 Hz
Connection CEE 32 A / 6h
Feed channel 1.150 x 565 mm (w x h)
Loading height 1.090 mm
Max. bale size approx. 1.200 x 800 x 1.000 – 1.200 mm (w x d x h)
Bale weight approx. 380 – 500 k...
• Fully Automatic cardboard baler
• Press power 50 t (486 kN)
O3wxt
• Hopper Openig:1.200 x 920 mm
• Channel cross section 750 x 1.000 mm
• 22kw Electric drive power pack
• Wire Tying System 4-fold vertical
• Bin Lift System for 1100 litre wheelie bins.
Also different models avaliable !
1. Bale Size : 400 mm x 400 mm x...
Cwi9qqna
2. Press Box Dimensions ( W x L x H ) : 1000 mm x 2700 mm x 900 mm
3. Loading Bunker Dimensions ( W x L x H ) : 1650 mm x 2300 mm x 800 mm
4. Feeding Opening ( W x L ) : 1000 mm x 1600 mm
5. Capacity : 4-6 ton / h ( Aluminum , 12-19 ton / h ( Copper ) , 11-17 ton / h ( Steel )
6. Cycle Time : 30 seconds
7. Preliminary Compression Thrust : 140 Tons
8. Secondary Compression Thrust : 210 Tons
9. Main Compression Thrus...
Nominal force, 630 ton.
Nominal working pressure, MPa 20
Max.strokeofhydraulicramofmain cylinder, mm
1000 Variablespeed of hydraulicramofmain cylinder, mm/sec
At idle stroke 20—30
At working stroke 1,2—2,5
Bffaet9jem
Ar return stroke 30—45
Distancebetweenhydraulicramfaceand stop transverse beam, mm 500-4000
Movementspeed of stop transverse beam, mm/sec. 70
Max.diameter of workpiece, mm 1600
Total power, kW 18,5
Overalldimension, mm
Length 11 000
Width 3000
Height 3280
Heightabove the floor, mm ...
Here we offer articles from different company resolutions, which we describe as good as possible, as well as meaningful photos. Further information about the article cannot be given.
We offer the possibility to visit Tuesday and Friday in the time between 9 and 16 o'clock after making an appointment by phone. If necessary, the article can be taken away immediately.
Due to time constraints, we can only provide answers to this article if you provide us with a telephone number when making your inqu...
The Baller is working and can be seen in full production before 31. juli.
Weight capacity: 8 - 19 t/h
Volume capacity: 350 m3/h
Feed opening l x w: 1500 x 1100 mm
Oil pressure: 265 Bar
Oil tank: 1000 liters
Electric motor: 37 Kw
Machine weight: 20 ton
Pugcvy
HSM 500.1 VL (No.A) vertical bale press, 4 Kw, press power 54 t, constructed in year 1999, feed channel 1.150 x 565 mm
Iqir7br
Technical specifications
Manufacturer HSM Pressen, Germany
Type 500.1 VL
Serial No. 200101000
Int.-No.A
Year of construction 1999
Pressing power 50 t
Drive power 4 kW / 400 V / 50 Hz
Connection CEE 32 A / 6h
Feed channel 1.150 x 565 mm (w x h)
Loading height 1.090 mm
Max. bale size approx. 1.200 x 800 x 1.000 – 1.200 mm (w x d x h)
Bale weight approx. 380 – 500 kg
Pres...
Used machine - Maintained by an authorized service center.
Technical data:
Motor kW: 7.5
Connected load V/Hz: 400 / 50
Pressing force max. kN: 600
Cycle time s: 36
Pressing time s: 16
Width cm: 189
Depth cm: 140
Height cm: 217
Weight kg: 2430
Toss-in opening
Ewcfolx
W x H cm: 116 x 55
Height above ground cm: 118
Ejected bale
W x H x D approx. cm: 120 x 80 x 110
Bale weight* kg: 340 – 500
*Depends on the pressed material
**Optionally with strap
Freight costs depend on the weight, volume and...
Also different models avaliable !
1. Bale Size: 400mm x 400mm x.
2. Container Dimensions (Width x Length x Height): 800mm x 2500mm x 800mm
3. Capacity: 3000 – 4000 kg / hour (Iron & Steel)
4. Cycle Time: 90 seconds
5. Top Cover Cylinder Thrust: 90 tons
6. Preliminary Compression Cylinder Thrust: 140 tons
7. Main Compression Ram Thrust: 210 tons
8. Maximum Working Pressure: 300 bars
9. Electric Motor: 37 kW
10. Machine Dimensions (Width x Length x Height): 3400mm x 6800mm x 3000mm
11. Machi...
• Fully Automatic cardboard baler
• Press power 50 t (486 kN)
• Hopper Openig:1.200 x 920 mm
• Channel cross section 750 x 1.000 mm
• 22kw electric drive power pack
Brd2trbcvp
• Wire Tying System 4-fold vertical
• Bin Lift System for 1100 litre wheelie bins.
Scrap baling press 40x40xvar.
Box 2500 x 2000 x 1000 mm
Bale: 400 x 400 x var./ ca. 80 - 200 kg
Power 2 x 90 kW
Output: 72 bales/h, i. e. ca. 6 - 12 t/h
Epgxhlcbc
Baling press (used machine)
Bbov2ivalw
Pressure: 35 tons
Net price: 10 800 euro’s
Technical description:
Pressure: 35 tons
Engine: 11 kW
Bale size: 100 x 70 x 120 cm
The door and the covers open automatically (hydraulic system)
First cover: 100 x 100 cm
Second cover: 100 x 150 cm
Width: 220 cm
Length: 640 cm
High: 230 cm
Weight: 5 tons
The wiring system: 4 horizontal wires
The machine works perfect, it’s ready to be sold and to work
We ensure 3 months of warranty!
If you have any quest...
HSM vertical baling press, type V-Press 1160 plus (No.16), press power ca. 54 t, motor power 7,5 kW, constructed in 2012, 2115 hours of operation
Technical specifications
Manufacturer HSM GmbH & Co. KG
Type V-Press 1160 Plus
Int.no.16
Year of construction 2012
Operation hours 2115 h
Press power approx. 54 t
Motor power 7,5 kW
Bubkxccgj9
Loading aperture 1195 x 650 mm
Bale weights Up to 550 kg (depending on material)
Max. bale size 1200 x 1100 x 1200 mm (L x W x H)
Hourly output in bales 1-2
Pre...
Bale size: 800x900mm
Belbzfncwf
Press force: 250kN
Power: 18,5 kW
Also different models avaliable !
1. Bale Size: 600mm x 400mm x ...
2. Container Dimension (Width x Length x Height): 620mm x 1300mm x 620mm
3. Capacity: 0,8 – 1,2 tons / hour ( Iron - Steel )
4. Bale Weight: 45 – 100 kg
5. Cycle Time: 90 seconds
6. Top Cover Cylinder Pressure: 63 tons
7. Main Compression Cylinder Pressure: 110 tons
8. General Working Pressure : 250 bar
9. Machine Dimensions (Width x Length x Height) : 2120mm x 4350mm x 1320mm
10. Electric Motor: 15 kW
11. Machine Weight: 6.8...
Presses with sturdy construction and fixed pressing Chamber, where the Schiebepresskopf is stored. The press force is generated by a hydraulic cylinder with pressing force regulation, which guarantees long term reliability at a high specific pressure is reached. The press room is top filled. The system of the front door and the tipping of the package allows easy removal of the compressed package from the pressing Chamber. The Chamber design allows the double strapping of the package with PE tape...
HSM vertical baling press, type V-Press 1160 plus (No.13), press power ca. 54 t, motor power 7,5 kW, constructed in 2011, 3005 hours of operation
Technical specifications
Manufacturer HSM GmbH & Co. KG
Type V-Press 1160 Plus
Int.no.13
Year of construction 2011
Operation hours 3005 h
Press power approx. 54 t
Motor power 7,5 kW
Loading aperture 1195 x 650 mm
Bale weights Up to 550 kg (depending on material)
Gnhds8zt
Max. bale size 1200 x 1100 x 1200 mm (L x W x H)
Hourly output in bales 1-2
Press...
Bale size: 300x300mm
Power: 90kW
Press force stage 1: 1500kN
Belby227ce
Press force stage 2 1500kN
Press force stage 3: 2000kN
Automatic operation
Different models are also available!
B3tzj32
1.Bale Size: 400mm x 400mm x ...
2. Printing Box Dimensions (W x L x H): 1000 mm x 2600 mm x 900 mm
3. Loading Bunker Dimensions (W x L x H): 1400 mm x 1850 mm x 500mm
4. Feed opening (W x L): 1000 mm x 1600 mm
5. Capacity: 3-4 tons / hour (Aluminum, 13-15 tons / hour (Copper), 9-10 tons / hour (Steel)
6. Cycle Time: 45 seconds
7. Pre-Compression Push Printing: 120 Ton
8. Secondary Compression Push: 120 Ton
9. Main Compression Push Printing: 220 Ton
...
The press is for the processing of waste paper, cardboard, plastic, plastic bottles, films, different container types, textiles, tin cans, etc. suitable. If you use multiple containers or one process different materials, you can effectively separate the waste. To help protect the environment and save storage space, time and money.
Maximum pressing force: 5T ± 5%
External dimensions (Lxwxh) (mm): 855 x 680 x 1950
Dimensions (Lxwxh) (mm): 600x400x(300–700)
Dmrkvn2es
Package weight (kg) maximum: 8...
HSM vertical baling press, type V-Press 1160 plus (No.12), press power ca. 54 t, motor power 7,5 kW, constructed in 2010, 2282 hours of operation
Technical specifications
Manufacturer HSM GmbH & Co. KG
Type V-Press 1160 Plus
Int.no.12
Year of construction 2010
Operation hours 2282 h
Gsemv9ifk
Press power approx. 54 t
Motor power 7,5 kW
Loading aperture 1195 x 650 mm
Bale weights Up to 550 kg (depending on material)
Max. bale size 1200 x 1100 x 1200 mm (L x W x H)
Hourly output in bales 1-2
Pres...
Bale size: 300x300mm
Force lid cylinder: 1000kN
Force maincylinder: 1000kN
Jb8ctjz0c
Power: 22kW
Capacity per hour: t/h 3 to 4
Mobile version
Incl. Atlas crane
HSM vertical baling press, type V-Press 1160 plus (No.11), press power ca. 54 t, motor power 7,5 kW, constructed in 2010, 2287 hours of operation
Technical specifications
Manufacturer HSM GmbH & Co. KG
Type V-Press 1160 Plus
Int.no.11
Year of construction 2010
Operation hours 2287 h
Press power approx. 54 t
Motor power 7,5 kW
Loading aperture 1195 x 650 mm
Bale weights Up to 550 kg (depending on material)
Max. bale size 1200 x 1100 x 1200 mm (L x W x H)
Hourly output in bales 1-2
Bubkpasone
Pre...
Bale size: 400x400mm
Force lid cylinder: 900 KN
Force maincylinder: 1200 KN
Jbyj0qzww
Power: 30 kW
ready for use, completely overhauled
Hydraulics: Rexroth
Control: PLC SMC25R
HSM vertical baling press, type V-Press 1160 plus (No.10), press power ca. 54 t, motor power 7,5 kW, constructed in 2010, 3631 hours of operation
Technical specifications
Manufacturer HSM GmbH & Co. KG
Type V-Press 1160 Plus
Int.no.10
Year of construction 2010
Operation hours 3631 h
Press power approx. 54 t
Motor power 7,5 kW
Loading aperture 1195 x 650 mm
Bale weights Up to 550 kg (depending on material)
Max. bale size 1200 x 1100 x 1200 mm (L x W x H)
Hourly output in bales 1-2
Press chamber ...
Baler Europress 6500 V5 H4, press force 120 tons, constructed 2009, drive power 75 kW, only 15,334 working hours, actually in overhauling
Bfugy77zvi
Technical data:
Manufacturer Europress
Typ 6500 V5 H4
Year of construction 2009
Hours of operation 15,334 hours, stand January
Quantity of pressed bales 138,097 bales, stand January
Press power main press 120 tons
Specific press capacity 142 kg/cm²
Feed channel 1,650 x 1,100 mm (l x w)
Filling volume 3 m³
Capacity per cycle time 1,58 m³
Bale size 7...
Presona LP 40 OH2, constructed 1997, motor 30 kW
Technical specifications
Manufacturer Presona Sweden
Type LP 40 OH2
Year of construction 1997
Feed opening 1000 x 690 mm (LxW)
Drive power 30 kW
Press power 40 t
Tying system 4-fold, horizontal
Max. volume capacity 250 m³/h
Press capacity at
bulk weight of 25-30 kg/cbm Approx. 6-7,5 t/h
bulk weight of 30-40 kg/cbm Approx. 7,5-10 t/
Bd2gwdhj3u
Press chamber volume 0,77 cbm
Bale size 750 x 850 mm (WxH), length varible
Oil tank volume 600 litres
Tr...
Here we offer extraction a Welger balers channel with bangs.
Welger channel balers RC 660
Compact and fully automatic
Variants
Press materials
Paper trim (strips and endless)
Paper & foil bags
PP foil edge trimming
Film strip
Dress protection film (PP and PE-foils)
PP / PE fiber material
Insulating and non-woven fabrics
Foam mesh
Packaging foam
TetraPak
Length mm, width 900 mm, height 2100 1755mm
RC 660
3 x 400V 50 Hz 16A
2.2 kW 5,0A
700 kg
Brück extraction
Series: KFA
Size: 60-30-3000
Air c...
Forging line INVER PRESS LECCO 100 T built in Italy. Brass forgings were made on the line from a solid rod fi 19. After swelling, we get a diameter of fi 24. Product lengths: from 25 to 50 mm.
The forging line consists of the following devices:
1. INVER PRESS LECCO 100 TON forging press, eccentric with pneumatic clutch, pressure: 100 tons
- dimensions of the eccentric press (width x length x height): 1750 x 1100 x 2100 mm
2. AMYSA WMU V-10x induction device made in Italy:
- induction heating ba...
In this offer you acquire a used 5-colour production system "Xerox 1000 Colour Press".
Item for sale:
1 x Xerox 1000 Colour Press with the following equipment:
incl. Stacker LCS-1
incl. Finisher Interface Module A-GW01
incl. Paperdeck JCF-1
incl. FreeFlow Controller
Counter readings:
Total: Approx. 5,265,956 pages
Colour: Approx. 4,754,305 pages
Black: Approx. 511,651 pages
Condition:
This is a used machine and may show signs of use (minor scratches or yellowing).
(min...
pressure:400 t
distance between columns:1100 mm
stroke:250 mm
no. of strokes:25 - 75 /min
distance table/ram, max. stroke up, adjustment up:900 mm
table surface area:1100 x 965 mm
capacity of ejector in table:30 t
ejector stroke of ejector in table:80 mm
capacity of ejector in ram:3 t
2wdpz2jj
stroke of ejector in ram:60 / 70 mm
ram surface:980 x 800 mm
column travel -side:800 mm
ram adjustment:20 mm
power capacity:80,0 + 5,5 kW
weight:47,0 t
Dimensions (WxDxH):3,5 x 3,3 x 6,0 m
weight of switch...
pressure 16 t
plate thickness 4 mm
no. of strokes 70 Hub/min
stroke speeds 1,7 sec.
working feed 2/9.8 mm/sec
return speed 20 mm/sec
piston stroke 70 mm
arm length: 160 mm
Nulov
total power requirement 2,2 kW
weight of the machine ca. 350 kg
dimensions of the machine ca. 0,8 x 0,45 x 1,43 m
pressure 60 t
stroke 380 mm
table surface area 750 x 260 mm
press capacity 588 kN
Pressure power 259 bar
working width 750 mm
pressing speed 2,07 mm/sec
feed speeds 8,69 mm/sec
Bulayr0ewk
return speed 10,79 mm/sec
Ø 210 mm
total power requirement 1,5 kW
weight of the machine ca. 0,6 t
dimensions of the machine ca. 1,3 x 0,8 x 2,1 m
This 60 ton motorized workshop press with sliding cylinder is very robustly
built and manufactured in the Netherlands. The hydraulics work extremely
precisely i...
50 mm
roll diameter 150 mm
revolutions per minute 10 U/min
voltage 400 V / 50 V
Tlvmt3hi
adjustment movement hydraulic up to 120 mm
motor speed 1400 U/min
total power requirement 1,5 kW
weight of the machine ca. 430 kg
dimensions of the machine ca. 1200 x 800 x 1750 mm
Unique Cold Hydraulic Press Specially Designed for Engineered Wood Flooring (Parquet) Production
Deck Art MK1 (first generation) Cold Press CP 250/2500 (3800)
Technical parameters:
• Max gluing width - 250 mm
• Max gluing length - 2500 (3800) mm
• Max gluing height - 850 mm
• Working height (static) - 800 mm
• No of pressing cylinders (total) - 16 (24) pcs
• No of pressing cylinders per cycle - 4 cycles x 4 cyl. (4 cycles x 4 cyl.; 4 cycles x 2 cyl.)
• No of independent pressing cycles - 4 (8...
Spindel Press Krause
Year - Serial-No. 190675
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
Eoaxjnybs
-On Stock Emskirchen / Nürnberg - Can be test-
Screw bookbinding press 50 × 40 on the base
The device is fully operational, ready to work.
Buelqd7hox
Format 500 × 400 mm
Pressure 5t
pressure 10 t
plate thickness 4 mm
no. of strokes 26,6 Hub/min
stroke speeds 1,7 sec.
Nlmbf
total power requirement 2,2 kW
weight of the machine ca. 190 kg
dimensions of the machine ca. 0,68 x 0,44 x 1,214 m
⢠Minimal footprint
⢠Height continuously adjustable
Bjfhulirbn
⢠Suitable for 2- and 4-up
Low-cost shipping The Smart Stacker XXS has been developed in order to enable CtP users in the 2- and 4-page format a space-saving and cost-effective possibility of plate stacking. On a footprint of only 640 x 658 mm, up to 100 plates are automatically stacked by that stable âlightweightâ made in Germany. Low-cost shipping due to a package size of 118 x 78 x 17 cm (L x W + H) and weight of only 1...
pressure:400 t
distance between columns:1060 mm
stroke:450 mm
no. of strokes:15 - 30 /min
Fe7ib0b
distance table/ram, max. stroke up, adjustment up:1160 mm
table surface area:1000 x 700 mm
capacity of ejector in table:2 x 16 t
ejector stroke of ejector in table:125 mm
Die cushion pressure in table:120 t
Die cushion stroke in table:2 mm
capacity of ejector in ram:2 x 4 t
stroke of ejector in ram:100 mm
ram surface:1000 x 700 mm
column travel -side:630 mm
power capacity:55,0 kW
weight:50,0 t
die c...
In this offer you will purchase a used colour production system "Xerox Colour J75 Press
Bk9ah3g8ak
Object of sale:
1 x Xerox Colour J75 Press with the following equipment:
incl. Squarefold
incl. Impose Fiery Edition
incl. booklet finisher JFN-1
incl. booklet finisher LFN-7
incl. booklet finisher ZYC-1
incl. Send Kit Fiery EX-J75
counter readings:
Total: approx. 1,611,042 pages
Colour: Approx. 793,022 pages
Black: Approx. 818,020 pages
Condition:
This offer is f...
Spindle Press Krause KgS
Year - Serial-No. KgS
Jiciqnz
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
-On Stock Emskirchen / Nürnberg - Can be test-
Used Baling press
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Machineseeker becomes biggest sponsor of the 2nd Bundesliga in Germany
How to receive 100% of our e-mails
Photo gallery: The World's 10 biggest excavators
Sell now on Machineseeker! Over 220,000 inquiries per month
Morlock Motors official partner of Machineseeker and Truckscout24
Photo gallery: the 10 strongest forklift trucks in the world
