Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, CNC Thread, Gear, and Profile Rolling Machine Model ROLLEX 1 Substructure: The substructure of the thread and profile rolling machine consists of welded steel profiles, partially covered with sheet metal. The space for the process lubricant reservoir is located in the front area of the substructure. Main drive: The main drive generates the rotary motion of the rolling tools required for gear rolling. The drive motor is flanged to the base plate of the rolling spindle bearing via the Cyclo Drive gearbox. The rotary motion is transmitted to the rolling spindle via the Schmidt coupling. The machine operates in a speed range of 0 to 30 rpm, with this range further subdivided into 0 to 20 rpm for continuous operation (S1) and 20 to 30 rpm for intermittent operation (S4). The speed is continuously adjustable using a frequency converter. Brand PROFIROLL Type ROLLEX 1 Crob Hlev Uxq Sswzfob Year of manufacture 2003 Control, Brand, Type Siemens, Sinumerik, 840D Motor power (kW): 18 kW Electrical connection: 400 V Rolling range: Max. rollable workpiece diameter: 40 mm Rolling carriage stroke: 2 x 80 mm Min. / max. center distance of rolling spindles: 160 / 320 mm Rolling spindle height above the machine bed: 160 mm Max. tool diameter: 250 mm Rolling spindle mounting diameter: 120 mm Rolling spindle mounting length: 80 mm Power & Drive Max. rolling force: 100 kN Rolling spindle speed, continuously variable 0-30 rpm Motors Rolling spindle drive: 2 x 13 Nm Hydraulics 50 Hz: 5.5 kW Process lubrication 50 Hz: 0.1 kW Central lubrication 50 Hz: 0.06 kW Temperature range: +5–+40 °C Current type/frequency: 3 N/50 Hz Nominal voltage: 400 V Control voltage: 24 V Auxiliary voltage: 24 V/230 V Connected load: 18 kW Nominal current of the machine: 39 A

Condition: good (used), thread cutting machine, pipe thread cutter -Manufacturer: Ridgid, thread cutting machine on mobile base frame -Type: 535-2B -Cutting head: 1/8 to 2" -Motor: 380 V / 1.35/1.7 kW -Accessories: including extensive accessories see photos -Transport dimensions: 1120/1120/H1290 mm -Weight: 201 kg Crjb Hjq Ei Dmslwzfob

Condition: used, Year of construction: 1968, Gewinde-Ø 52 mm threading length 500 mm Crjb Hlwzsv N N Scsfsb thread pitch entsprechend Hohlspindel -Ø 54 mm spindle turning speed range 25 - 140 U/min turning speeds: 6 Stufen voltage 380 V / 50 Hz main drive motor 3 kW total power requirement 4,5 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,0 x 1,8 x 1,4 m • with driven workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder,size: Z52/2B, + 21B • 5 sets of chaser jaws,pitch 1 - 2,5 mm Machine is in a good condition.

Condition: used, Year of construction: 1987, thread dia. 3 - 16 mm Tools speed 56 - 140 U/min Creb Hlsv T Nrdewzfeb table-size 490 x 360 mm throat 180 mm voltage 380 V threading length 60 mm total power requirement 0,55 kW weight of the machine ca. 0,25 t dimensions of the machine ca. 0,8 x 0,8 x 1,7 m

Year of construction: 1998, Condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Cjb Hlwzjfnk Ehoferb Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Condition: excellent (used), ROLLER THREADING MACHINE KING2 SET C R1/2-2. Threading machine, electric Design: sturdy, maintenance-free gearbox with special ratio for perfect power transmission, left/right handed, with thermal overload protection and emergency stop. Self-reinforcing clamping effect by diagonal adjustment of the clamping screw. Stable torque support for torque support in both directions of rotation. Easy and quick replacement of cutting heads. Unique locking of the cutting head in the ratchet lever, guaranteeing secure seating during threading. Supplied with Central cutting heads and carrying case. Cjb Hlwzsvgng Hefsrb

Condition: used, Functionality: fully functional, warranty duration: 6 months, This machine is in very good condition, ready to use with approx. 30 sets of thread rolls or without buying the rolls Csb Hsv Rpmvjlwzferb

Condition: good (used), Thread cutter, tapping machine, tapping machine Crjb Hljb A N Ihswzfjb -Integrated reversing gear: with fast reverse -Nominal consumption: 230 watts -Max. Cutting capacity: M6 -Connection: 230 volts -Weight: 2.5 kg

Condition: new, Year of construction: 2025, Functionality: fully functional, thread length: 12,000 mm, overall weight: 5,000 kg, workpiece diameter (max.): 90 mm, spindle diameter: 80 mm, type of input current: three-phase, roll diameter: 250 mm, spindle speed (max.): 50 rpm, spindle speed (min.): 20 rpm, total height: 2,000 mm, total length: 2,400 mm, total width: 2,000 mm, 60 ton hydraulic thread rolling machine with swivel spindles for infeed and thru-feed rolling Crjb Hlwzov Rb Apofsb Download PDF file for photographs

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 24 mm, Model RE16 to M16, model RE24 to M24 - ball bearing mounted wear-free parallel arm with radii of 1270 or 1800mm - Connection 230V / 1Ph - Infinitely variable speed adjustment - Digital speed display Crob Hlwjrb Akmozfjb - digital depth control with memory for 5 programs - quick-change holder according to DIN standard Options: Micro spray system for model 1800 Cast iron table Wheels for cast iron table Multifunctional head for cutting at any angle

Condition: good (used), - Pneumatic motor GAMOR - Reinforced am structure made of hard aluminum (parallelogram) - Table fixing column Crjbov Dvt Ae Hlwzfeb - Capacity: M2-M8 - Speed: 700 RPM - Working radius max: 1900mm - min: 200mm - Working air pressure: max: 7 bar - 840 lt/min - Weight: 18 kg Sold without the welding table (as seen in the pictures), only the machine, which can be mounted on a table or similar.

Year of construction: 2013, Condition: new, Various thread rolling tools Manufacturer: Fette see list all tools new ! M12-14x1,5 2/57 1K 1509925 1 M12-14x1.75 2/53 1K 1509970 2 7/16-20UNF T18-63-21.5 1538172 7 M20x1.5 T18-226-14A 1539858 8 M16x1.5 T18-33-21.5 1537459 6 M20x1 T18-158-21.5 1555189 6 11/16-14 US T27-687-31 2178650 6 M8-10x1.25 2/518 0.6K 1509550 2 M8-10x1 2/05 2K 509541 2 Creb Hljbv Tg Hswzfeb M8-10x1.5 2/772 0.3K 1 M8x1.25 T18-0.3-21.5 1536370 15 3/4-16 UNF T27-88-22A 2182703 2 M22x1.5 T27-39-14A 1544067 1 1/2x20 UNF T27-909-10A 2406829 3 3/4/16 UNF T18-67-16A 1538332 4 M12x1.5 T18-30-21.5 1536959 4 7/8-14 UNF T27-89-20A 3 M12x1.25ISO T27vB 31mm 291 5 M8x1.25 T18-03-08A 2175185 7 M8x1.25 T18-03-10A 1536316 1 M8x1 T18-17-21.5 1539787 1 11/16-14UNS T27-687-31 2178979 1 M25x1.5 T27-41-22A 2 M16-18x1 34/363 3K 1517783 4 M24x1 LH T27-29L-31 2179796 3 M24x1 ISO T27 31mm 3 M20x0.5 T18-228-16A 2177355 1 M12x1.25 T18-28-21.5 1536888 2 3/8-24 UNF T18-62-21.5 1538154 2 3/4-16 UNF T18-67-16A 1538332 2 10-32 UNF T18-286-12A 1538056 1 M12x1.5 T18-30-21.5 1536959 1 M18x0.75 T18-186-08A 1537547 3 M8x1 1223/05 1K 1508533 2 M11x0.75 T12-22-12A 2 M12x1 T12-27-15.5 531918 10 M7x0.75 T18-12-21.5 2179611 3 M7x1.0 1 M17.5x0.5 ISO T27vB 31mm 275 1 M16x1 T18-24-20A 1537379 1 M10-12x1.5 2/515 0.6K 1 M16x1 T18-24-21.5 1537388 2 M7x1.0 ISO T18 16mm FormA 5 1/2-20 UNF T27-85-16A 1545761 1 M12x1 T27 1 M18x1.5 T18-35-21.5 1537627 3 13/16x16 2 1/8-28 GAS T18 21mm

Condition: used, Year of construction: 2016, throat ca. 2000 mm total power requirement 0 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 1,3*0,8*2,2 m Cjb Hljv Da U Djwzfsrb

Year of construction: 1995, Condition: ready for operation (used), 1 brought threading machine Manufacturer: Microtap Cob Hlwzsim Iqqsferb Type: Megatap II Year of manufacture: 1995 Technical data: - Operating voltage, machine standard 230 V ± 10 % version microtap II - Frequency 50/60 Hz - Power consumption - Version G8/ 230 V 16 A / T (slow) - Compressed air unlubricated (ZAP - operation) min. 200 kPa (2 bar) max. 800 kPa (8 bar) - Compressed air unlubricated (MMS - operation) min. 400 kPa (4 bar) max. 800 kPa (8 bar) - Torque - Version G8 50 to 700 Ncm - Rotational speed - Version G8 300 up to 3.000 min-1 - Spindle stroke version Version G8 max. 85 mm - achievable thread depth version G8 max. 75 mm - achievable accuracy of depth measurement 0,1 mm (without consideration of the tolerance of the tool holder) Operating instructions Dimensions, weights - Dimensions over all approx.: (L (depth) x W x H in mm) Version G8/14/16 - with column 750 mm at max. adjustment travel 544 x 312 x 1047 - With a higher column, the height dimension increases by the difference of the column height. - Machine type Spindle Tool holder Version G8 Taper B12 SZS / Quick change system SWS1 Working ranges - Adjustment travel of the columns in Z-direction (without tool) Column type Version G5 Version G8 Version G14 /16 750 mm approx. 430 mm approx. 400 mm approx. 388 mm - Thread capacity (cutting) - Version G8 M 2.5 - M 8 (X5CrNi189) (Metric ISO standard thread; M 2.5 - M 10 (9SMn28)

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 2666, thread length: 3,000 mm, overall weight: 1,200 kg, workpiece diameter (max.): 30 mm, spindle diameter: 40 mm, type of input current: three-phase, roll diameter: 135 mm, total height: 1,500 mm, total length: 1,000 mm, total width: 1,000 mm, roll width: 70 mm, Excellent used ORT 10 ton Hydraulic Thread Rolling Machine complete with 5 sets of thread dies Cjb Hlwjuafptezforb

Condition: used, Table threading machine M1 - M10 Height adjustment via toothed rack and hand crank, motor 0,22+032 kW Ceb Hlwoda I E Djzfjrb motor rpm 1420/ 2770 spindle Upm 480 - 580 Weight 100 kg Tapping chuck with key Under table Connection cable with 16 A CEE plug

Condition: good (used), 01) BILZ , WFLK – 115 / A 79 , SK 40 7 pieces of quick-change inserts with safety slip clutch 02) BILZ , type WFLK 225 , A 82/30 8 pieces: quick-change inserts with safety slip clutch 03) NIKKEN , BT 50 – Z12 - 130 , 5 pieces: quick-change inserts with safety slip clutch Cjb Hlwzev Aud Rofjrb . .

Condition: new, Bernardo TM 16 BLO/ R 1100 Electric thread cutting machine Technical specifications Tapped holes* M3 - M16 Speed max. 120 - 325 rpm Adjustable angle 0° - 90 Max. Working radius R 1100 mm Quick change chuck DIN 371: M3 / M4 / M5-6 / M8 / M10 DIN 376: M12 / M14 / M16 Motor power 600 W Voltage 230 V weight approx. 26 kg * Material strength 400 N / mm2 Scope of delivery Operation via touch screen Digital drilling depth display Micro spray system Blow-out device Quick change chuck Quick change chuck according to DIN Ceb Hlspag Npewzfsrb Electric motor 90° angle adjustment Mounting flange Features Standard with micro-spray system for constant cooling and minimal cooling lubricant consumption Including blow-out device for removal of chips, thus optimal view of the drill hole Including quick-change chuck for the use of taps for through and blind holes Swiveling motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed right angle (90°) High productivity, significant time savings compared to manual thread cutting Quick-change chuck with integrated slip clutch prevents tap breakage Including swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base 900 x 600 mm with 2 drawers for TM series 830,00

Condition: good (used), Functionality: fully functional, UPW 12.5x70 Crsb Hlwzev Htvaofob

Condition: good (used), max. threading capacity up to M 6 with guide cartridge throat 130 mm drive power 0,55 kW dimensions L x W x H approx. 350 x 650 x 750 mm weight approx. 90 kg Accessories / special features: - Threaded guide cartridges: 1 x pitch 0.5 mm 1 x pitch 0.6 mm 1 x pitch 0.7 mm 2 x pitch 0.8 mm 1 x pitch 1.0 mm - Various adjustable working cycles such as: Automatic, foot operation Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Cjb Henyh Tnjlwzferb

Condition: new, Hydraulic tapping machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm Thread M 5 - M 24 Working range 2050 Rmax. Working height 920 mm Table surface 900 x 700 mm Oil capacity 100 l Motor power 3.0 kW Weight: 220 kg Equipment: Hydraulic tapping machine Incl. machine base with clamping disk Mobile Hydr. pressure gauge Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24 Cjb Hetbawkolwzferb

Condition: new, Bernardo TM 36 BLO/ R 1200 Electric threading machine Technical specifications Threaded holes* M5 - M36 Tool holder GT 24 Speed max. 30 - 150 rpm Adjustable angle 0° - 90 Max. Working radius R 1200 mm Quick-change chuck DIN 376: M5-6 / M8 / M10 / M12 / M14 M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36 Motor power 1200 W Voltage 230 V Weight approx. 35 kg * Material strength 400 N / mm2 Scope of delivery Operation via touchscreen Digital drilling depth display Micro spray system Blow-out device Quick-change holder Quick-change chuck according to DIN Csb Hlwzspag R Roferb Electric motor 90° angle adjustment Mounting flange features With micro-spray system as standard for constant cooling and minimum cooling lubricant consumption Includes blow-out device for removing chips, providing an optimum view of the drill hole Includes quick-change chuck for using taps for through holes and blind holes Swivel motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed to be at right angles (90°) High productivity, significant time savings compared to manual tapping Quick-change chuck with integrated slip clutch prevents the tap from breaking Includes swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base frame 900 x 600 mm with 2 drawers for TM series 830.00 € plus 19% VAT

Condition: new, Hydraulic threading machine Dyas HTM 45 Thread diameter up to M 45 Speed 0 - 100 rpm thread M 10 - M 45 Working range 2050 Rmax. working height 920 mm table surface 900 x 700 mm Crob Hlwzjkhk R Ssfsb oil capacity 100 l Engine power 5,5 kW Weight:315 kg Equipment: Hydraulic threading machine Incl. machine base with clamping disk Mobile Hydr. manometer Infinitely variable speed adjustment from 0 - 100 rpm Vertical / horizontal thread cutting possible Special accessories included / quick change inserts : M10 / M12 / M14 / M16 / M20 / M24 / M30 / M36 1 x adapter T-slot plate

Condition: new, Hydraulic threading machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm Cob Hlekhmgiowzfsrb thread M 5 - M 24 Working range 2050 Rmax. working height 920 mm table surface 900 x 700 mm oil capacity 100 l Motor power 3,0 kW Weight:220 kg Equipment: Hydraulic threading machine Incl. machine base with clamping disk Mobile Hydr. manometer Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: new, Bernardo TM 36 E / R 1700 Electric thread cutting machine Technical specifications Tapped holes* M5 - M36 Speed max. 150 rpm Adjustable angle 0° - 90 Reach R 1700 mm Quick change chuck DIN 376: M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36 Motor power 1200 W Voltage 230 V Weight approx. 53 kg * Material strength 400 N / mm2 Scope of delivery - Operation via touch screen - Digital drilling depth display - Quick-change chuck according to DIN - Quick-change chuck - electric motor Cjb Hlwzsgk Ay Ujferb - 90° angle adjustment - mounting flange - (Price is without sub company 792,00 € net ) - Including quick-change chuck for the use of taps for through and blind holes - Swivel motor unit for tapping at any desired angle between 0° and 90 - Higher accuracy compared to manual tapping, thread is guaranteed right-angled (90°) - High productivity, significant time saving compared to manual tapping - Quick-change chuck with integrated slip clutch prevents tap breakage - Optionally available magnetic base for direct use on large and heavy workpieces - Including swivel arm with large radius for easy positioning of the tap on the workpiece - High economic efficiency due to low investment and maintenance costs - For tapping in steel, stainless steel, aluminium and non-ferrous metal