Used Metalski Zavod Tito for sale (77)

Year of construction: 1990, condition: reconditioned (used), Year of renovation: 2010 Output kVa: 1375 Volt: 6300 V Dedpjini Hwjfx Afnekg Total weight: 74000 kg Other information: 1,16 MW Diesel Generator, Completely renewed

Condition: good (used), Year of construction: 1982, sheet width 2000 mm plate thickness 2 mm Dsdpow N S Eiofx Afnekg distance between columns 2080 mm total power requirement 2,2 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3,0 x 1,2 x 1,5 m Hydraulic swivel bending machine - max. dimensions of the sheet to be bent: 2000 x 2 [mm] - Power of the electric motor: 2,2 kW - Bending angle: 0 - 180 degrees

Condition: ready for operation (used), Beckhoff CP3921-0010 multitouch control panel 21.5" SN:3356351-001, used, in good condition, 100% functional, delivery as per photos. Dksdpfxox Eqv He Afnsg

Condition: good (used), Year of construction: 2006, Belt sander 75 with pedestal Dedpfxsxyqi Ts Afnokg

Condition: ready for operation (used), functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, workpiece weight (max.): 150 kg, Punching and nibbling machine with TRUMALIFT Sheetmaster! TECHNICAL DETAILS Press force: 220 kN Max. sheet thickness: 6.4 mm Travel path X-axis: 2,500 mm Travel path Y-axis: 1,270 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed simulation: 108 m/min Positioning speed rotary axis: 360°/sec Punching diameter: 76.2 mm Dksdpfx Afex I Hh Ronsg Minimum programmable increment: 0.01 mm or 0.01° Workpiece weight: 150 kg Tool stations: 15 pcs Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,400 x 5,800 x 2,100 mm Machine weight: approx. 11,050 kg EQUIPMENT Multitool control "Softpunch" function Pneumatic follow-up cylinders Small parts sensor for programmable part chute Parts box for finished parts Chip conveyor with container Scratch-reduced processing Air-cushioned mounting Additional clamping bridge Prepared for TRUMALIFT SheetMaster TRUMALIFT Sheetmaster for workpieces up to 2,500 x 1,250 mm Alignment system for loading stack with spreader magnets Manually movable scrap grid system

Condition: ready for operation (used), Year of construction: 2012, punching force: 18 t, total height: 2,252 mm, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, controller manufacturer: BOSCH, controller model: MTX CMP70, product length (max.): 6,500 mm, General Data Measurements height 2252 mm Control Unit Brand BOSCH Model MTX CMP70 Dkedpfox D Dklsx Afneg Dimensions Machine Length 6500 mm Movement X-Axis Movement 2500 mm Y-Axis Movement 1250 mm Main Drive Punching force 180 Kn Maximum sheet thickness 6.4 mm This TRUMPF TruPunch 3000 S11 was manufactured in 2012. It features a Bosch MTX CMP70 control system, with X/Y-axis travels of 2500 / 1250 mm, and can handle sheet weights up to 160 kg. The machine includes a linear tool magazine with 18 stations and offers functions like MultiTool, MultiBend, and thread forming. Consider the opportunity to buy this TRUMPF TruPunch 3000 S11 CNC punching machine. Contact us for more information about this machine. Application Types Punching

Condition: new, Year of construction: 2025, Planer-thicknesser – versatile woodworking machine A planer-thicknesser is a versatile woodworking tool that allows for flattening, thicknessing, and smoothing wood surfaces. Ideal for carpentry and furniture manufacturing, it enables precise planing, edge processing, board production, creation of joinery components, and preparation of materials for gluing. This is a stable machine equipped with a high-quality cast iron table, cutting knives for material removal, an electric motor, and convenient adjustments that make it easy to operate. Also known as a jointer, the planer-thicknesser is designed for initial processing of both rough and hard wood, as well as soft lumber. Its purpose is to level, smooth, and bring wood to the desired thickness through mechanical processes. It’s especially valuable in carpentry and furniture production, where precision and repeatability are essential. Stable construction with enhanced weight for vibration resistance The machine weighs 170 kg and features wide, ground cast iron tables (250 mm), ensuring excellent stability and safe operation. Additional rubber feet allow vibration-free operation. VERSION with a high-performance motor – Total power (S6): 2.6 kW Dedpfx Afjwt Axponekg The PT260 planer-thicknesser stands out with its exceptionally powerful motor: Total power (S6): 2.6 kW Continuous power (S1): 2.0 kW This is significantly more than what many competitor machines offer, translating into better performance and more stable operation. Stronger motor = better efficiency and easier processing of hardwoods. Hardwoods require more power to process, and this motor handles them with ease. Effortless conversion from jointer to thicknesser Switching between jointer and thicknessing functions is quick and simple. It involves unlocking the eccentric clamps, lifting the tables, and repositioning the dust extraction hood. Precision and ease of adjustment Smooth table height adjustment with scale Central column-mounted thicknessing table with handwheel for height regulation 700x150 mm aluminum tilting fence with scale strip for accurate angle settings from 90° to 45° Technical Specifications: Parameter Value Cutter block diameter 75 mm Cutter block speed 4000 rpm Dust extraction port diameter 100 mm Tilting fence angle range 90° – 45° Number of knives 3 Knife dimensions 250x30x3 mm Table dimensions 1100x250 mm Thicknessing table dimensions 600x248 mm Max. planing width (jointer) 250 mm Max. planing depth (jointer) 5 mm Max. thicknessing depth (single pass) 2.5 mm Max. cutting depth (thicknesser) 3 mm Max. workpiece height (thicknesser) 180 mm Thicknesser feed rate 6 m/min Fence dimensions 700x150 mm Machine dimensions (L x W) 1100x250 mm Weight 170 kg Motor power S1: 2.0 kW / S6: 2.6 kW Power supply 400 V

Condition: new, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: automatic, color: white, number of seats: 23, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, 517 Sprinter Lord Comfort low-floor vehicle available for immediate delivery. Equipped with GSR2 systems, which have been mandatory since July 8, 2024. Many competitors offer vehicles without these features! Stock vehicles with flat floor. Base Vehicle: - 125 kW Euro 6e engine - 9-speed automatic transmission - Front air conditioning - Auxiliary heater - Driver's air suspension seat with seat heating - Roof-mounted beacon lights - Driver comfort package - Length: 7,336 mm - Reversing camera and parking sensors front and rear (Parking package) with front camera - Blind spot assist - Turning assistant - MBUX 10-inch (radio with Bluetooth, CarPlay, touchscreen) - Tire pressure sensors - Attention assist - Active lane keeping assist - Start-off information assistant - Intelligent speed assist Dedsx Ru Rxjpfx Afnskg - Distance assist - Rain sensor - Electrically adjustable exterior mirrors - Cruise control Conversion: - Thermal and acoustic insulation - Rear extension by 500 mm, resulting in a total length of 7,886 mm - Electrically operated exterior swing door with recessed entry - 22 +1 +1 passenger seats / sleeper seats - Total capacity: 22 + tour guide + driver; reduction to 19+1 available upon request - VIP tinted double glazing - Convector heating in passenger compartment - Roof hatch - Simple luggage racks left and right - USB ports at each row of seats - Webasto air conditioning in passenger area (second compressor) - Interior lighting in white / orange in passenger compartment - Curtains - Add-on parts painted in vehicle color Net export possible.

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 47,000 h, laser power: 2,000 W, punching force: 76 t, workpiece weight (max.): 120 kg, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Special features: + Thread forming function with thread breakage detection + MultiTool function + Marking/Fast beading function + Repositioning cylinder + Sensor for part chute Standard features: - Stable C-frame - Coordinate guide with integrated linear magazine - 21 pockets for tools and clamps - 2 clamps - Drives: maintenance-free three-phase servo motors - Brush tables - TCF1 laser (2000W) - HI-LAS high-pressure cutting - Fast machining with SprintLas - Programmable Cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Cutting head quick-change device - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotating tool holder - Automatic repositioning device with hold-down clamp - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamps - Good parts container - Spray lubrication for punches - 2nd lubricant container - Punch slug extraction system - Chip bucket - Hydraulic quick shut-off system - External control panel - 15" TFT touch color screen Dodswcq Hgjpfx Afnskg - USB stick interface - 3.5" floppy disk drive - Safety features - RJ45 network connection - Network connection - Detailed operating instructions - Remote diagnostics system

Condition: new, The sustainability of the blimatic bk 3 Oeco-Skin packaging machine is impressive, as it consumes 90% less electricity compared to its competitors. This leads to a significant reduction in energy consumption, making it both cost-efficient and environmentally friendly. The core of the oeco version is the "just-in-time" film heating system. The heating element is only activated when actually needed. During loading, the machine remains in standby mode. The use of the heating element can be controlled to the second. Advantages Sustainability and cost efficiency already during production No unnecessary kilowatt-hours 90% reduction in power consumption No heat radiation into the working environment or onto the packaged products "Just-in-time" at the start of operation—no waiting times Dedpfxox Rdkuj Afnjkg Proven system Product specifications Semi-automatic skin packaging machine Working area: 350 x 500 mm Maximum product height: 100 mm Also available as a larger model with a 500 x 700 mm working area

Condition: new, functionality: unexamined, Control: Bosch CC 220S Punching Force: 165 kN Max Positioning Speed: 97 m/min Max. Sheet Thickness: 6.4 mm Tool Change Time (sec.): 1.5-6.5 Number of Tool Stations: 15 tool stations with 2 clamps Dkodpfsx Rc N Nex Afneg Multitool (total capacity 90) 15 cartridges complete with die rings Max. Workpiece Weight (kg): 150 Max. Stroke Rate (1/min): 500 Machine Weight: 8000 kg Power: 14 kVA Dimensions | Width: 6000 mm x Depth: 5600 mm Delivery, installation, programming system, consumable tool package, training, warranty

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,700 h, machine/vehicle number: 0126427-027, Equipment: type plate available, LVD STRIPPIT GLOBAL 30 1225 Turret Press Machine in very good technical condition, used at Alsanit. Regularly serviced only by the manufacturer's service. Service parts used in the service - only new and original. The turret press is in continuous production use. If you are interested, we encourage you to make an appointment to confirm the technical condition and technological capabilities of the offered machine. It is possible to provide a video presenting the operation of the turret press, please send an inquiry with a request for sharing. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of production of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine mileage: 83700rh Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC :GE FANUC 180 IP Maximum travel in the X axis: 2,576 mm Maximum travel in the Y axis: 1,337 mm Maximum table load (even): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per min (die fi 25 mm); ±2% 400 min-1 Number of strokes per min ("nibbling" function - 2 mm): 1000 min-1 Number of strokes per min (marking/0.5 mm): 1700 min-1 Maximum feed rate (speed) in the X axis: 83 m/min Maximum feed rate (speed) in the Y axis: 73 m/min Number of tool sockets (stations) in the turret: 30 pcs. Station A – max. diameter 12.7 mm: 8 pcs. Station B – max. diameter 31.7 mm: 16 pcs. Station C – max. diameter 50.8 mm: 2 pcs. Station D – max. diameter 88.9 mm: 4 pcs. Number of indexed (rotary) stations in the revolver: 4 pcs. (D stations) Note: A multitool can be placed in each D station (1 multitool has 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Working sheet size: 1,250 x 2,500 mm Dsdpfswptduox Afnokg Number of sheet metal clamps (individually programmable): 3 pcs. Tilting work chute for cut parts: 450 x 500 mm Electric power supply 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Waste conveyor; Brush table The LVD Strippit Global 30 punching machine has 4 programmable rotary stations (size D). Each station can be equipped with a multitool head with automatic rotation. Using a servo drive, as well as CNC control - both the rotary stations and the entire turret have the possibility of bidirectional rotation with an accuracy of 0.01 degrees. The Auto Index rotary stations of the LVD Strippit Global 30 punching machine operate on the principle of direct drives, which are located directly above the station, constituting part of the turret mechanism. In the rotary stations with a diameter of 88.9 mm, a multitool tool holder can be mounted, thus increasing the machine's capabilities and the number of tools. The multitool holders allow for the installation of 3 or 8 punches and dies with a diameter of 12.7 mm or 31.7 mm, respectively. We issue a VAT invoice The price given is a net price!

Condition: new, total height: 3,300 mm, cutting width (max.): 1,200 mm, overall weight: 15,000 kg, power: 37 kW (50.31 HP), saw blade length: 7,750 mm, blade width: 160 mm, The PLUS are Mebor’s most advanced horizontal sawmills, with the latest innovations. PLUS band saws bring more production and speed, as well as versatility. The HTZ 1200 PLUS is performing with unmatched productivity in the price range. It is relied on by sawmills on all continents, from soft wood sawmills to quality oriented hardwood sawmills. Key features: • Fast return speed & servo controlled blade positioning, • Fast automatic control preventing operator delays, • High speed hydraulic log manoeuvring functions, • Precision made machine with top quality components. Mebor System® is our own system of horizontal band saws, which sets us apart from our competitors. With a Mebor band saw you will increase your productivity and yield, as well as decrease labour costs. Wood is unpredictable and for this reason Mebor band saws have a strong and robust construction. It guarantees reliability of functioning and minimises maintenance costs. Band saws adapted for your needs – for small and big sawmills.Every Mebor band saw is custom made ; therefore we supply each customer an optimal band saw for his needs. We will advise which model is most suitable for your needs and requirements. We will also adjust the configuration of the band saw; for example the distances between clamps according to the lengths of logs, equipment etc. Dedericwqepfx Afnjkg Automatic board removing (Mebor System® ) We were the first to introduce the board removing system, which saves your time. After the band saw cuts a board, the board pusher pushes it off the band saw bed during the return of the band saw head. Simple and automatic, with no manual work. Automatic functioning - Mebor System®. It leads the operator during cutting. It provides important information, which helps him choose the optimal cutting for best output. Manual control is also available for less demanding users. Full log manoeuvring equipment is available for fast and effortless work. Precision of cutting is ensured by the solid construction and wide blades. All Mebor band saws are using wide blades (80-210 mm wide). The fact is that wide blades provide higher sawing speed, as well as better sawing precision. The high quality of your products will increase the satisfaction of your customers.

Year of construction: 2023, condition: new, Fully automatic depowdering machine for AM (3-D printed) components -- directly from the manufacturer, inc. 1 yr guarantee -- Less than 50% of cost of closest competitor 500 x 500 x 500 mm process chamber Dksdpfxjk Tai Re Afnjg Fully programmable part movements (offline and per touch-panel) 120 kg part weight Patented vortex suction system Fully Programmable shake paths Inert gas protected Pneumatic vibrator with infinitely variable vibration with infinitely variable vibration strength Pallet mounting system with zero-clamping options Unbeatable economics

Condition: good (used), functionality: fully functional, Year of construction: 2013, laser power: 2,700 W, X working area max.: 2500 mm Y working area max.: 1250 mm Control system: Rexroth IndraMotion MTX (basic version) Laser power: 2700 Watt Standard Equipment Machine - Sturdy, easily accessible C-frame - Coordinate guide system for high-precision machining - Linear magazine with 23 tool stations and 2 clamps - Maintenance-free three-phase drive motors - Repositioning unit with programmable hold-down device - Foot pedal for clamp closing - Alignment pin (right inside) - Ball tables - 2 parts flaps 500 x 500 mm incl. sensor for parts ejection - Two good parts containers - NitroLine - Focus Line - FastLine Dkedpfxex Aq Axo Afnog - FlyLine - Slag cone detection - Ejector cylinder for laser parts TRUMPF Laser - TruFlow 2000 laser with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control - Enclosed beam guidance - Fine filtration of compressed air for beam tube ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change system UTI with bus connection - ControlLine Punching Station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down device with manually adjustable holding force - Stroke counter for punch and thread-forming - Punch spray lubrication - Punch slug extraction - Measurement of fill level in punching console - Level monitoring for thread-forming and tool lubrication Control - TRUMPF control based on Rexroth IndraMotion MTX - Operating panel with 17" touch screen - Integrated technology data - Teleservice via internet - Programmable cutting gas pressure - Automatic shutdown incl. wake-up mode - Program management - Production scheduling Data Transfer - Network connection RJ45 and USB interface Safety - CE marking - Two-beam light curtain - Monitoring system for gas pressure, temperature, and cooling water - Emergency stop - Protection against stray radiation - Compact extraction unit + Brush tables + Lowerable die + MultiTool function + Softpunch function + Marking function + Chip conveyor with tilting container + Roll technology functions: roll knurling, roll deburring, roll shearing, roll offsetting, roll bead forming, roll cutting + Die spray lubrication + Blow-off device for small parts + 1 pc. additional clamp + Smart Punch Monitoring (punch breakage monitoring) + Vibration-damped installation + Repositioning cylinder + Warping detection + Parts conveyor belt in punching area + Parts conveyor belt in laser area + GripMaster (2500x1250) + Scissor lift table + Scrap grid pallet + SheetMaster (2500x1250) (AK04) + Peeling system + Automatic clamp closing + HZP loading/unloading + TwinCarts loading station with toothed belt drive + TwinCarts unloading station with toothed belt drive

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 7,900 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 7,850 h, laser power: 3,200 W, punching diameter: 76 mm, Equipment: centralized greasing system, cooling unit, dust extraction, emergency stop, foot remote control, fume extraction, nozzle changer, quick-change device, safety light barrier, Laser TruFlow 3200, including LensLine with optimized standby Nozzle changing device Multitool drive system "Multishear" function "Multibend" function Tapping function High-speed "Marking" / "Ribbing" function Engraving function Rolling and deburring function Softpunch function Active Die Stripline Repositioning with pneumatic cylinders Vibration-dampened installation Chip conveyor with container Ball table work surface with brush inserts Blowing device SheetMaster (3000 x 1500) Automatic sheet separation system with lateral air blast Additional positioning guides for sheet size (2500 x 1250) Dodjx N Hyvspfx Afnokg Additional positioning guides for sheet size (2000 x 1000) Discharge control device GripMaster (3000 x 1500) Double trolleys with toothed belt drive (3000 x 1500) Loading and unloading unit Good part conveyor on punching side Good part conveyor on laser side Warehouse interface No. 21 RTC toolboxes incl. die holder plate

Condition: used, Year of construction: 2001, gebraucht 2001 9647 prompt, Zwischenverkauf v Italien 24400 € 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm 40 m/Min 30 m/Min 50 m/Min 30 mm 730 1/Min 300 1/Min 980 mm 4 kW 115 l Dksdpfx Afowirkgjnsg 4000 mm 2780 mm 1900 mm 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm

Year of construction: 2013, operating hours: 84,545 h, condition: ready for operation (used), General Data Machine weight 17500 kg Main Drive Punching force 220 kN This TRUMPF TRUPUNCH 5000 S10 was manufactured in 2013. It features a Siemens Sinumerik 840D control system, a working area of 3050x1550 mm, and a punching press of 220 kN. Capable of handling sheet weights up to 280 kg and thicknesses up to 8 mm, it includes a Linear ATC for 21 tools and additional options like MULTITOOL and ENGRAVING. Regularly maintained and in good condition. Contact us for more information about this machine. Dsdpfx Afjx D Nwwonokg Application Types Punching

Condition: used, Applicable material: Concrete Cargo space capacity: 60.000 l Dkodpfx Afjx Dzb Ienjg Polygonmach single shaft mixers has been designed for ready mix concrete nad other type of concrete types prodcution from c10 to c40. Its robust helical design enables its low problematic, low maintenance necessity, low abbrasion rate, longlife span. Paddles, pallets and helical arms made from ni-hard 25mm width, body and side wearing plates made from 10mm hardox 400 plates. Discharge covers are controlled by pneumatic or hydraulic which can be managed by Scada-PLC software. From 0,5 to 2 m3 capacity is available. Polygonmach single shaft mixers offers its customers with automatic lubrication systems, easy lubrication bar to multiple points, top cover for several applications. Polygonmach in contrast to competitors gives you %100 flexible design and customer based projectsü, multiple hopper and mixer design is available. Motor type: hydraulic Mobility: truck-mounted Other characteristics: automatic, single-shaft Capacity: Max.: 2 m³(70.6 ft³)Min.: 0.5 m³(17.7 ft³) concrete plant

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: A0045A0406, sheet thickness (max.): 6 mm, total length: 2,000 mm, A TruPunch 1000 in mint condition. Can be seen running in our building in Bruges. The machine has the following options: MultiTool, Threadcutting, Detection of sheet Dkedpfx Asx Hi Evjfnsg

Condition: good (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function Djdpfx Afswld Suenjkg - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: used, Applicable material: Concrete Cargo space capacity: 60.000 l Polygonmach single shaft mixers has been designed for ready mix concrete nad other type of concrete types prodcution from c10 to c40. Its robust helical design enables its low problematic, low maintenance necessity, low abbrasion rate, longlife span. Paddles, pallets and helical arms made from ni-hard 25mm width, body and side wearing plates made from 10mm hardox 400 plates. Discharge covers are controlled by pneumatic or hydraulic which can be managed by Scada-PLC software. From 0,5 to 2 m3 capacity is available. Polygonmach single shaft mixers offers its customers with automatic lubrication systems, easy lubrication bar to multiple points, top cover for several applications. Djdpfxex A R Eme Afnekg Polygonmach in contrast to competitors gives you %100 flexible design and customer based projectsü, multiple hopper and mixer design is available. Motor type: hydraulic Mobility: truck-mounted Other characteristics: automatic, single-shaft Capacity: Max.: 2 m³(70.6 ft³)Min.: 0.5 m³(17.7 ft³)

Condition: good (used), Year of construction: 2009, operating hours: 44,287 h, functionality: fully functional, X Working area max.: 2500 mm Y Working area max.: 1250 mm Operating hours: 44,287 hours Control system: Bosch PNC-P Standard equipment: Machine - Stable, easily accessible C-frame - Coordinate guide for high-precision machining - Linear magazine with 18 tool positions including 2 clamps - Drives with maintenance-free three-phase motors - Reloading device with programmable hold-down device - Ball tables - Part chute 180 x 150 mm - Automatic shut-off Dkodpfx Aewlifmofnjg Punching head - Hydraulic punching head - Rotatable mono-tool holder - Programmable hold-down device - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming Control system - Open control system based on Bosch PNC-P - Control panel with 15" TFT color screen - Program management - Integrated Technology Data - Teleservice Data Transfer - USB Interface and Network Connection Safety - CE Marking - Multi-Beam Light Barriers - Hydraulic Quick Shutdown + Multitool Function + MultiShear Function + MultiBend Function + Thread Forming Function + Marking/Fast Beading Function + Deburring and Rolling Technology Function + Soft Punch Function + Movable Support Table + Part Slide Sensor + Vibration-Dampened Installation + 2nd Stop Pin + Bow Detection

Condition: good (used), Year of construction: 2023, operating hours: 5,001 h, functionality: fully functional, X working area max.: 3000 mm Y working area max.: 1500 mm Control: TRUMPF Control based on Rexroth IndraMotion MTX Machine: - Closed machine frame - Hybrid axis system - Linear magazine with 24 slots for clamps and tools - Hydraulic clamps (3 pieces) - Drives with maintenance-free three-phase motors - Repositioning with programmable hold-down device - Foot pedal for clamp closing - Parts chute on the right Punching Head: - Delta Drive - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch lubrication spray system - Punch slug extraction - Forming function - Stroke counter for punches Control: - TRUMPF Control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Programmable cutting gas pressure - Automatic shut-off - Remote support interface - Program management - Production planning Data Transmission: - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Dual-beam safety light curtain Extended Standard Equipment: - 1st positioning pin (inside right) + Brush tables Dsdpjxxbwxefx Afnekg + MultiTool + Thread forming with thread counter + Thread-former breakage monitoring + Lubricant level monitoring + Marking/rapid beading + Deburring and rolling technology + Adaptive stroke calibration + Die lubrication spray system + Smart Punch Monitoring + Parts flap on the left + Parts conveyor belt for parts flap left + Collection tray for parts conveyor left + Sensor for parts chute + Parts conveyor for parts chute right + Additional clamp + 4x individually openable clamps + 4x height-adjustable clamps + Automatic clamp closing loading sensor system + Optical loading sensor + Automatic repositioning movement to compensate for loading tolerance + Repositioning device for DeltaDrive + Vibration-dampened installation + Chip conveyor with tilting bin + Machine status light + Warpage detection + Wireless Operation Point SheetMaster Compact 3000 x 1500 (AK05): - Loading station with spreading magnet for sheet separation - Suction frame - Vacuum sensors - Double sheet detection - Unloading cart for residual grids and microjoint sheets - Second operator station for loading and unloading + Compact setup for light grid and reference point system + Peeling system SortMaster Compact: - Machine-integrated automated small part removal - Suction frame for unloading good parts up to 600 x 400 mm (X x Y) - 2 suction bars (each suction cup individually controllable) - Unloading area 600 x 800 mm - Vacuum sensors for the suction circuits + X-axis extension - Extension of the unloading area to 1200 x 800 mm

Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm Y working area max.: 1270 mm Control: Bosch Type 3 Basic Standard equipment: - Robust C-frame Dkodpfx Aoxxbdlsfnjg - Safety light barriers - Coordinate guide with integrated linear magazine - 2 clamping claws - Automatic tool changer - Automatic repositioning - Tool length compensation - Forming capability - Mono tool holder with 360° rotation for all tools - Programmable hold-down device - Multitool drive - Punch slug extraction - Brush tables - Part chute 200 x 200 mm, sorting of parts into 2 containers - NC-controlled, digital, maintenance-free three-phase drives - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphical programming - Online diagnostics via modem - Operating manual + Vibration-damped installation + Multitool + Thread forming + Start post