Used thickness planer for sale (207)

Condition: excellent (used), CATALOGUE NUMBER 7618 TECHNICAL DATA - Shaft width: 500mm - Number of knives: 4 pcs - Max. thickness of workpiece: 230mm From above: - Pawls - Toothed, pulling, twisting, sequential infeed shaft - Pressure rollers - Surfacing shaft - Pressure roller - Smooth, pulling outfeed shaft From below: - 2 sliding rollers on the table - Motor: 5.5kW - Manual table lifting - 2 feed speed settings: 7.5; 13 m/min - Diameter of dust extraction port: 160mm - Dimensions (L/W/H): 1100x1000x1200mm - Weight: 600kg Csdsztxdfjpfx Aatshd ADVANTAGES - Made in Italy - Unpainted - Used thicknesser, very good condition Net price: 15900 PLN Net price: 3698 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: excellent (used), Thickness planer SCM S520 Max. planing width: 520 mm, Max. planing height: 250 mm, 4 classic knives (so-called wedge type), electric height adjustment, 4 feed speeds, 2 adjustable table rollers, electronic height readout, Extraction port: 150 mm, Motor: 5.5 kW, Chjdpfx Aasy N Uc Ested quiet operation, machine in very good condition.

Condition: excellent (used), Planer width 510 mm Min/Max. working height 3 - 240 mm Motor power 4.0 kW, 400 V, 50 Hz Speed of planing shaft 4500 rpm Diameter of planing shaft 120 mm Planer knives 4 pcs Dimensions of thickness table 510 x 850 mm Feed speed 6.5 / 10 / 13 / 17 m/min Dust extraction diameter 120 mm Electric height adjustment Handwheel for fine adjustment of thickness table height Articulated pressure bar 2 pcs under-table rollers Low-voltage release Emergency stop switch Knife setting gauge Test report for conformity with Section 4 of the Machinery Ordinance 1 set of spare planer knives Dimensions approx. L x W x H = 1000 x 900 x 1450 mm Weight approx. 900 kg Note regarding used machines: • Subject to errors in technical specifications and prior sale. • Stated prices are ex-works and include free loading. • The machine has been cleaned and function-tested. Cedpfx As Aaw H Neatohd • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machines at the location. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address and telephone number!)

Condition: good (used), Jaroma Thicknesser Max. planing width: 530mm, Csdpfx Aajztaktjtohd Max. planing height: 200mm, 2 feed speeds, 3 conventional knives (wedge-type), Electric table adjustment (up-down). 2 rollers in the table. 7.5KW motor 130mm dust extraction port Machine ready for operation.

Condition: used, Bauerle Planer Max. planing width: 630 mm, Max. planing height: 220 mm, 4 conventional knives, 2 speeds in the gearbox, 2 speeds via belt drive, 5.5 kW motor. Chodpfx Aajznaftstsd

Condition: used, Year of construction: 2019, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 120 mm, number of blades: 96, actuation type: electric, Equipment: CE marking, - Year of manufacture: 2019. - Condition: very good. TECHNICAL SPECIFICATIONS: - Planing width: 630 mm - Planing height: 3-300 mm - Digital control of table height with display - Motor: 7.35 kW - Maximum chip thickness: up to 8 mm - Minimum workpiece length: 250 mm - Diameter of planing shaft: 120 mm - Silent-Power spiral shaft, i.e., very quiet with four-sided knives - Self-aligning planing knives, i.e., no adjustment required after rotation - Additionally, 2 rollers in the table for processing wet or resinous wood Codjzim Rropfx Aatshd - Smooth feed speed adjustment from 4-16 m/min - Power supply: 3 x 400 V - Diameter of dust extraction port: 160 mm - Weight: 845 kg - Dimensions (L / W / H): 125 x 115 x 114 cm

Condition: used, Bäuerle DM63 thickness planer for the precise thickness machining of solid timber and wood-based materials. The machine is suitable for use in joinery workshops and industrial settings, and its robust construction ensures low-vibration, dimensionally accurate planing. Ideal for the uniform calibration of workpieces in both batch and custom production, fitted with a Leitz CentroFix reversible-blade planing shaft. Includes original shaft for strip planing blades Technical data: Cedpezrxz Iefx Aatehd - Working width: 630 - Clearance height: 220 - Feed rate: 7 / 9 / 14 / 18 m/min - Blades: CentroFix Z4

Condition: excellent (used), Catalog number: 7734 TECHNICAL SPECIFICATIONS - Shaft width: 630mm - Max thickness of workpiece: 230mm - 4-knife planing shaft * Top: - Ratchets - Toothed infeed shaft, pulling - Pressure roller - Planing shaft - Pressure roller - 2 smooth, pulling outfeed shafts * Bottom: - Adjustable roller in the lower bed - Motor approx. 7.5kW Chjdpfxoztxg Tj Aatsd - Smooth feed speed adjustment - Diameter of dust extraction nozzle: 145mm - Dimensions L/W/H: 1250x1300x1300mm - Weight: 908kg ADVANTAGES - Made in Italy - Very good condition - Used thickness planer Net price: 19900 PLN Net price: 4630 EUR, depending on the exchange rate of 4.3 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: used, Year of construction: 2023, Working width 630 mm Working height 3-300 mm Motor output 7,5 kW Number of knives 4 St. Feed speed 0-16 m/min. Dimensions (L/W/H) 1200x1100x1160 mm Csdpfeyk H S Hsx Aatshd weight of the machine ca. 950 kg

Condition: good (used), Code: 0503 Brand: SAC - ITALY Model: RS 53 - CE Standard Automatic thickness planer for joinery workshops, furniture factories, custom furniture, sawmills, wood, composite materials, plastics - CE Standard Technical data Working width mm 530 Max working height mm 240 Min working height mm 3 Max depth of cut mm 8 N° 4 knives Feed speed mt/min 5 - 7,5 - 10 - 15 Motor Hp 5,5 Diameter of suction connection mm 140 Overall dimensions mm 930 x 1050 x 1100 h Chodpfx Ao Aa Ayzsated Weight kg 970

Condition: excellent (used), SCM S52 thickness planer Max. planing width: 520 mm, Max. planing height: 240 mm, 4 classic knives (wedge-type), Chsdsza Dg Hopfx Aatsd electric lifting + manual lifting, feed speed infinitely adjustable, metal infeed roller, 2 rollers in the table, adjustable, digital height display, 160mm dust extraction port, 5.5KW motor, quiet operation, machine in good condition.

Condition: ready for operation (used), Casadei R63h3 Thickness Planer Maximum planing height: 300 mm Minimum planing height: 4 mm Cjdpfezv Dnzjx Aatjhd Feed speed: 5-25 m/min, stepless Planer cutterhead diameter: 120 mm Table dimensions: 1000 mm, mounted on 4 columns 4 cutterblocks with insertable knives, including setting gauge 2 feed rollers Electric height adjustment Weight: 1000 kg

Condition: used, Casadei R51h3 Planer Max. planing width: 510 mm, Max. planing height: 300 mm, Feed roller on the table, Chsdpfezlr Rvox Aatod 4 planing knives, Electric lifting, 4 feed speeds, 5.5 kW motor.

Condition: excellent (used), Year of construction: 2018, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 630 mm, overall weight: 1,100 kg, Felder Format-4 Thicknesser, model Exact63 – featuring Silent-Power spiral cutterblock and Digi-Drive. A high-quality industrial thicknesser from Austria, engineered for high precision, efficiency, and continuous operation. The machine combines robust construction with advanced technology and excellent ease of use—ideal for professional joinery workshops and industrial woodworking. Equipment and features: *Silent-Power spiral cutterblock – for efficient planing and a superior surface finish. *Digi-Drive digital table height adjustment – ​​simply enter the desired dimension, press start, and the table automatically adjusts to the exact height. *LED display – shows the set value and current table height. *4 programmable settings – for smooth and efficient operation. Chsdez R I Saopfx Aatsd *Variable feed speed, 5–20 m/min – adjust the speed to suit the desired result, ranging from a fine finish to rapid material removal. *Table extension – provides better support when handling longer workpieces. *Segmented infeed roller. *Additional outfeed table. Benefits: High precision and consistent planing results. Robust construction with high-quality components. High productivity during continuous operation. Advanced technology and user-friendly operation. Specifications: Working width: 630 mm Maximum planing height: 3–300 mm Motor power: 10 hp Feed speed: 5–20 m/min Year of manufacture: 2018 Premium machine in near-new condition. Transport across Europe can be arranged at a good price.

Condition: excellent (used), CATALOGUE NUMBER 7186 Chjdpfxoztalqj Aated TECHNICAL DATA - max. planing width 510mm - max. planing height, two-sided 170mm - max. planing height, four-sided 100mm *from above: - toothed infeed roller - pawls - toothed feed roller - pressure roller - planing roller 510mm, 4-knife (2 knives installed) 4kW - smooth feed roller, outfeed *from below: - guide strip - slip roller – adjustable table with roller, up/down - planing roller 510mm, 2-knife 4kW - 2 smooth, slip rollers, adjustable *from the rear: - 2 side spindles + pressure roller - 1) vertical right spindle 100mm 2.35kW - 2) vertical left spindle 100mm 2.35kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual planing thickness adjustment - 4 feed speed settings - feed motor 1.5kW - dimensions L/W/H 1940x1320x1140mm - weight 1330kg ADVANTAGES – ideal for processing logs, flooring, etc. – manufactured by the German brand KUPFERMUHLE – used planer, very good condition Net price: 32900 PLN Net price: 7651 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: repair required (used), Thickness planer Chjdpfx Aeyh Ut Roatjd Manufacturer: SCM Model: S63 B Year of construction: N.A. Working width: 630 mm Max. workpiece height: 240 mm Min. workpiece height: 3 mm Max. stock removal: 8 mm Table size: 630 x 1,000 mm Power: 5.5 kW Knife type: Tersa Number of knives: 4 Outfeed roller: Steel 1x table roller, driven Height adjustment: Electric - Manual Feed speed: 6 - 18 m/min; infinitely variable Speed: 4,500 rpm Dimensions: 1,250 x 1,050 x 805 mm Weight: 825 kg

Condition: used, functionality: fully functional, planing width: 540 mm, Thickness planer Steton Chedpfxey Epz Sj Aatod

Condition: used, Technical specifications: Max. planing width: 520 mm Cutterhead diameter: 120 mm Number of knives: 4 Total length of tables: 2965 mm Electric table height adjustment Tilting feed table Safety switch Power supply: 400 V Motor power: 4 kW Codpfxjzia E Nj Aatehd Overall dimensions: Length: 2965 mm Width: 1400 mm Height: 1150 mm

Condition: ready for operation (used), Schelling D66 Planer width 650 mm Maximum planing height 220 mm Number of knives 4 Table length 1,100 mm Number of feed rollers 1 Main motor 5.5 kW Table rollers Knife shaft with strip planing knives Material transport via steel roller Weight approx. 1,085 kg Space required, length 1.2 m Cjdpfjzcutpsx Aatshd Space required, width 1.4 m Space required, height 1.1 m Condition: Functionality tested

Condition: used, total width: 900 mm, total height: 1,250 mm, Year of manufacture: 2018 Colour: Grey Weight: 800 kg Dimensions (LxBxH): 130 x 90 x 125 cm - Details: - └ Description: New engine installed - Year: 2018 - CE marking present: Yes - Serial number: 63CE00007-8 - Main motor power [kW]: 7.5 - Max. planing width [mm]: 630 - Min. planing height [mm]: 2 - Max. planing height [mm]: 288 - Planing shaft speed [rpm]: 4500 - Worktable length [mm]: 860 - Worktable width [mm]: 630 - Planer block diameter [mm]: 100 - Cutter type: Tersa - Number of cutters [pcs.]: 4 - Number of cylinders height adjustment [pcs]: 4 - Extraction nozzle diameter [mm]: 160 - Max. feed speed [m/min]: 18 - Height adjustment: Manual - Options: Digital readout, Braked motor - Min. feed speed [m/min]: 6 - Max. feed speed [m/min]: 18 - Voltage [V]: 400 - Current consumption [A]: 17.5 Chsdpfxsz Rzkbj Aated - Fuse [A]: 32 - Power [kW]: 7.5 - Transport dimensions: 1300mm x 900mm x 1250mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Thickness planer Casolin Topstar 530 Max. planing width: 530 mm, Max. planing height: 300 mm, 4 feed speeds, 4 traditional knives (wedge type), Electric table height adjustment with electronic display, Chodpfeyv A Atex Aatjd 3 top feed rollers, including 2 rear rubber outfeed rollers. 5.5 kW motor Extraction port: 160 mm Machine weight: 1100 kg Machine ready for operation.

Condition: used, Year of construction: 1990, used, in good condition with Tersa cutterblock and infinitely variable feed Make: SCM Model: S63B Year of manufacture: 1990 Machine no.: 47015 GS-certified Motor: 5.5 kW Planing width approx. 630 mm Planing height approx. 3–240 mm Segment pressure beam 2 steel feed rollers Feed rate: 18 m/min Number of knives: 4 pcs Knife system: Tersa reversible knives Digital height display Electric fine adjustment of height Extraction port D 160 mm Space requirement approx. 1250 x 800 x 1100 mm Weight approx. 750 kg Location: 97447 Gerolzhofen, freely loaded, unpacked Delivery in current inspected condition, without warranty or guarantee Chedsyztzqspfx Aated

Condition: excellent (used), CATALOGUE NUMBER: 8023 TECHNICAL DATA - shaft width: 610mm - number of knives: 4 pieces - maximum thickness of the workpiece: 200mm Csdoztqvgspfx Aatshd - from above: - pawls - toothed infeed shaft, pull type - pressure roller - planing shaft - pressure roller - smooth outfeed shaft, pull type - from below: - 2 smooth sliding shafts - adjustable rollers in the lower table - motor: 4kW - stepless feed speed adjustment: 7-14 m/min - diameter of dust extraction port: 170mm - dimensions (length/width/height): 1380x1100x1500mm - weight: 970kg ADVANTAGES - German-made - robust construction - used thickness planer, very good condition Net price: 9500 PLN Net price: 2209 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to fluctuations in the exchange rate)

Condition: used, Thickness planer SAC 530 Max. planing width: 530 mm Codpfjyt Hpwex Aatshd Max. planing height: 300 mm 4 classic knives clamped with wedges Electric height adjustment Feed speed adjustable via inverter from 4 to 16 m/min Segmented metal infeed roller 2 outfeed rollers after the planing shaft Digital height display 5.5 kW motor Quiet operation, works smoothly and efficiently

Condition: excellent (used), functionality: fully functional, thickness planer SCM S 63 + surface planer SCM F52 + spindle moulder SCM T160 second hand machines in Excellent working conditions NOT separate sale thickness planer model SCM S 63 L'Invincibile useful working width mm. 630 maximum (minimum) working height mm. 240 (3) maximum removal mm. 8 variable feed speed mt./min. 6 ÷ 18 motorized table positioning with reading n.4 knives "Tersa" main motor power Hp 7,5 volt. 380/50 spindle moulder with tilting spindle model SCM T160 L’Invincibile spindle tilting by electric -5 ° / + 45 ° spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 volt. 380/50 net weigth kgs. 1000 surface planer model SCM F 52 L'Invincibile working width mm. 520 tables length mm. 3000 ground cast iron tops n.4 knives tilting guide up to 45° Cjdpjvamvyofx Aatehd motor power Hp 5,5 volt. 380/50