Used Bench Planer for sale (4,451)

Year of construction: 2025, condition: as good as new (ex-display), Workbenches in Pro version Precise and careful processing Completely made of steamed, solid beech All important edges are rounded Environmentally friendly oiled surfaces Standard with tool drawer The two cylinder rods of the collets are precise and stable in a casting With smooth trapezoidal threaded spindle French front caliper with German rear caliper with linear Guide, two round bench dogs short, long, two round bench dogs drawer and loading in Finger hot dip galvanizing in rear caliper and by charging back 1915 mm long work surface without pliers Width/depth work surface without pliers 615 mm Working height 870 mm Length 520 mm front caliper Length 450 mm rear caliper Wide front caliper 70 mm Wide rear pliers 140 mm Span front pliers 190 mm Span back pliers 180 mm Podpfx Adec Uydaonegw Span front clamp until the Middle Hook 225 mm Span back pliers until the Middle Hook 265 mm Plate thickness 50 mm Length 2120 mm (product) Width/depth (product) 790 mm Height 870 mm (product) Weight 91 kg (net) Location: Off the shelf 54634 Bitburg

Condition: excellent (used), Double bench grinder Podpfok Iwx Eex Adnsgw

Condition: new, Year of construction: 2023, functionality: fully functional, CHILLER UNIT 290 kW – 2 separate refrigeration circuits, shell-and-tube heat exchanger, R32 Pgedpfju Au I Tox Adnjw Cooling capacity: 290 kW at 7/12°C and 35°C ambient temperature Shell-and-tube evaporator for efficient heat transfer and compact design Low-GWP refrigerant R32 Four compressors in two separate refrigeration circuits for high operational reliability and flexible load distribution Low-noise design thanks to optimized sound insulation Completely framed compressor enclosure for efficient protection, easy maintenance, and reduced noise emission Winter package allowing operation at ambient temperatures down to -20°C Ideally suited for industrial processes.

Condition: used, Capacity: 80 m/min Planer feed table, tested. At speeds up to 80 m/min. Pgedeg S Dm Nspfx Adnow

Year of construction: 1994, condition: excellent (used), 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm. Pgodpfx Ajl Dw Nxsdnow

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: - max width of the workpiece 23 cm Pgsdpfx Asi Apuhodnew - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: ready for operation (used), Butler Planer With Flott linisher attachment Vast amount of planning tools 6000mm x 2440mm table Pgjdpfjwwk Rbsx Adnow 3000mm between columns 2440mm under the bridge (vertical) New electrics and motor

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 107402, spindle diameter: 40 mm, number of spindles: 4, Equipment: CE marking, TECHNICAL DETAILS Pgedpfx Aoxw R Rlednjw Number of spindles: 4 pcs. Spindle diameter: 40 mm Infeed table length: 1,780 mm MACHINE DETAILS Dimensions (L x W x H): 2,170 x 4,600 x 1,830 mm Feed motor: 5.2 kW Feed drive: Cardan shaft drive Extraction nozzle diameter: 140 mm Voltage: 400 V EQUIPMENT CE marking Note: The machine’s bearings are in poor condition.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, workpiece height (max.): 120 mm, rotational speed (max.): 18,000 rpm, workpiece width (max.): 410 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum workpiece width: 410 mm Maximum cutting height: 120 mm Maximum speed: 18,000 rpm MACHINE DETAILS Pgedpfx Ajxw U Nxjdnow Installed total power: 5 kW Motor power: 4 kW Saw spindle: bottom EQUIPMENT CE marking

Condition: used, Year of construction: 2001, with air cushion table, chamfering unit Maximum working width: 260 mm Maximum working height: 160 mm Number of spindles: 6 units 1st spindle: bottom Spindle diameter: 40 mm Clamping length: 270 mm Rotational speed: 6000 rpm Motor power: 11.0 kW 2nd spindle: right Spindle diameter: 40 mm Clamping length: 170 mm Rotational speed: 6000 rpm Motor power: 11.0 kW 3rd spindle: left Spindle diameter: 40 mm Clamping length: 170 mm Rotational speed: 6000 rpm Shared motor with right spindle, with ATS/M system (automatic positioning control) 4th spindle: top Spindle diameter: 40 mm Clamping length: 270 mm Rotational speed: 6000 rpm Motor power: 11.0 kW With ATS/M system (automatic positioning control) 5th spindle: top, chamfering unit 6th spindle: bottom Spindle diameter: 40 mm Clamping length: 270 mm Rotational speed: 6000 rpm Pgsdpfx Adoxr A Npenow Motor power: 11.0 kW Motor brakes: mechanical Electrical hood interlock: Yes Height adjustment of top spindle: electric with feed Feed brake system: Yes Feed speed steplessly adjustable up to: 3 - 26 m/min Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: cardan shaft Lubrication pump: automatic Max. jointing cutting depth: 10 mm Jointing cutter on jointer: Yes Driven rollers in table: 1 unit Control type: PLC control Spindle measurement display: digital readout Infeed rollers before jointer: Yes Air cushion table: two-lane Central lubrication point: Yes Description: Jointer table with jointing fence 1.0 m, pneumatic pressure Infeed roller before jointer driven rollers in table Total connected load: 52 kW Location: supplier

Condition: like new (used), Year of construction: 2022, x-travel 2500 mm y-travel 3500 mm z-travel 1500 mm Control HEIDENHAIN TNC 640 c-axis +-360 ° milling head -swivable ° milling head swivable ca. +-360 ° table dimension - longitudinal 2500 mm table dimension - cross 3500 mm table load 6 t/m² coolant IKZ 70 bar Feed speed 60 m/min. spindle turning speed range 24000 U/min tool taper HSK-A63 milling spindle motor S6 (40% / 2 min) 41 kW max. torque on the spindle S6 (40% / 2 min) 49 Nm milling spindle motor S1 (100% / 2 min) 34 kW Psdpevwgtyefx Adnsgw max. torque on the spindle S1 (100% / 2 min) 39 kW tool change unit 60 Pos. weight of the machine ca. 74 t dimensions of the machine ca. 4 x 7.5 x 5.4 m This thermosymmetrical, ergonomic, universal ZIMMERMANN FZU32 portal milling machine is in mint condition and available immediately. DESCRIPTION: The FZU32 is a remarkably compact 5-axis portal milling machine for machining aluminium machining of aluminium, fibre composites, plastics, ureol and steel. steel. Thanks to the particularly rigid, newly developed centre-guiding gantry, we can meet the increasing requirements in model, tool and mould making. mould making. This thermo-symmetrical design makes the FZU32 less susceptible to adverse environmental conditions.

Condition: excellent (used), CATALOG NUMBER 7616 TECHNICAL DATA - Shaft width: 510 mm - 4-knife shaft - Table length: 2640 mm - Shaft guard - Cast iron tables - Both tables adjustable - Original cast iron fence adjustable for angle - Motor: 4 kW - Extraction port diameter: 160 mm - Dimensions (L/W/H): 2640x1000x980 mm - Weight: 970 kg ADVANTAGES – German manufacture – Not repainted – Long tables – Used jointer – Very good condition Net price: 9900 PLN Net price: 2350 EUR at an exchange rate of 4.2 EUR (Prices may change with significant fluctuations) Pgsdpfx Adswbdn Usnjw

Condition: new, Year of construction: 2025, functionality: fully functional, Material feed unit for four-sided planer IF-100 Maximum and minimum length of workpiece: 1050 – 6100 mm Maximum and minimum width of workpiece: 50 – 247 mm Maximum and minimum thickness of workpiece: 12 – 100 mm Feed speed controlled by frequency inverter: 20–100 m/min Pedpfsxz Ax Nsx Adnsgw Main motor power: 5 kW Accelerating upper feed rollers: 2 pcs Accelerating lower feed rollers: 2 pcs Driven feed rollers: 3 pcs Feed roller dimensions: 180 × 100 mm Feed motor power with flat chain: 0.37 kW Number of flat feed chains: 5 pcs

Condition: good (used), Year of construction: 1978, Working width 520 mm Length of the planing table 2.800 mm Pedpfxoxzuw Ds Adnogw Number of knives 2 St.

Condition: like new (used), Year of construction: 2022, DEMONSTRATION MACHINE!!! For sale is a used Felder thickness planer D9-51 with a thickness capacity of up to 254 mm. The machine is in like-new condition and has been refurbished and inspected by our professional technicians. (fully functional) Technical data: - Planing width: 504 mm - 4-knife cutter block (replaceable knives system) - Electric thickness table adjustment with LED display - Planing thickness: 4–254 mm - Variable feed rate: 4–16 m/min - Max. chip removal: 8 mm - 7.5 HP (5.5 kW) motor, 400 Volt Pgsdpsxzph Dsfx Adnow - Year of manufacture: 2022 The planer is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: planer, thicknesser, thicknessing machine, Felder Reference: R-D1618

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: - Motor power: 3 kW - Spindle speed: 5,000 rpm - Spindle diameter: 120 mm - 4-knife shaft - Feed speed: 8 + 14 m/min - Maximum planing height: 230 mm - Extraction port: Ø 150 mm - Planer table: two-piece, foldable, synchronized on both sides Pgodpfx Adexzl Adjnjw - Planer fence: tiltable, inclination with magnifier display - Table height adjustment: via double universal joints, handwheel with digital readout - Thickness planer: with outfeed roller, spring-mounted, feed rollers driven synchronously Dimensions: 2,040 × 1,180 mm Weight: 560 kg Availability: short-term Location: Baden-Württemberg

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm throat 260 mm bore stroke 120 mm number of spindle speeds 80-1400 min-1 table surface area 410 x 390 mm total power requirement 0,8/1,5 kW weight of the machine ca. 250 kg dimensions of the machine ca. 0,75 x 0,6 x 1,15 m Podpfxeuhhzhe Adnjgw

Condition: excellent (used), Catalogue Number: 7641 ADVANTAGES – The best wide planer for wet and dry wood – Ideal for machining logs, floorboards, etc. – 3 planing shafts + 3 spindles – Manufactured by German brand KUPFERMUHLE – Used planer, in very good condition TECHNICAL DATA Max planing width: 800 mm Max planing height: 200 mm From above: - Feed-in roller, toothed, powered - Anti-kickback fingers - Pressure unit - 2 toothed feed rollers - Pressure unit - Planer shaft 800 mm, 4-knife, 7.5 kW - Pressure units - Profiling shaft 800 mm, 4-knife (equipped with 3 straight knives, 1 profile knife) - Pressure unit - Smooth outfeed roller From below: - Guide rail - Infeed table - Smooth feed roller - Planer shaft 800 mm, 4-knife, 7.5 kW - 2 smooth feed rollers - Split smooth sliding roller - Side pressure at outfeed From the rear: 2 side spindles + pressure units: 1) Right vertical 90 mm – 4 kW 2) Left vertical 90 mm – 4 kW - Spindle diameter: 35 mm - Alternately adjustable spindles - Spindles adjustable up/down, right/left 3) Additional horizontal bottom spindle 350 mm, adjustable up/down & right/left – 5.5 kW - Spindle diameter: 40 mm On outfeed: 4 upper metal sliding rollers, 2 lower powered rubber rollers Pgsdpfx Adswfti Ajnow - Adjustable rollers in the lower table - 6 feed speeds: 7/14/9/18/11.5/23 m/min - Feed motor: 2.2 kW - Extraction port diameters: 3×180, 130 mm - Dimensions (LxWxH): 3100x2000x1900 mm - Weight: approx. 3500 kg Net price: 64,900 PLN Net price: 15,450 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: good (used), functionality: fully functional, spindle diameter: 30 mm, milling spindle length: 140 mm, height adjustment type: electric, type of input current: three-phase, rotational speed (min.): 3,000 rpm, rotational speed (max.): 10,000 rpm, SCM T130E Spindle Moulder Spindle diameter: 30 mm Spindle length: 140 mm Pgsdpfx Aoxzyltednsw Variable spindle speed: 3000/4500/6000/7000/10000 RPM Main motor power: 7.5 kW Electronic spindle height adjustment via switch 4-roller feed unit Feed speed adjustment via variator CE certificate DTR technical documentation

Condition: used, Year of construction: 2021, Working width: 410 mm Planer shaft: Strip knives Number of knives: 4 Pgsdpfx Aoxnhpgsdnew Planer table length: 2360 mm Planer table adjustment: Lever Chip removal display: Scale Hollow/pointed joint display: - Planer fence angle adjustable: Yes Motor power: 4.4 kW Machine length: 2360 mm Machine width: 860 mm Weight: 475 kg

Condition: excellent (used), CATALOG NUMBER 7556 Technical specifications: - Min / max working width: 20 / 240 mm Pgsdpjvyzn Rsfx Adnow - Min / max working height: 8 / 160 mm - Number of spindles: 4 1) Bottom horizontal, 240 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 240 mm, 7.5 kW - All heads adjustable vertically and horizontally - Spindle diameter: 40 mm – Top: - 6 powered infeed rollers, toothed (including 2 double rollers) - 2 powered outfeed rollers, smooth rubber – Bottom: - Lateral pressure before and after the roller on the lower table - Powered infeed toothed roller, swiveling, on the lower table before the first spindle - 2 pneumatic lateral pressure units - Powered outfeed roller, smooth metal - All rollers pneumatically loaded - Infeed table length: 2180 mm - Table adjustable vertically - Centralized lubrication - Electric thickness adjustment - Lifting motor: 0.75 kW - Stepless feed speed adjustment via inverter: 6–30 m/min - Feed motor: 3 kW - Feed through Cardan shafts - Enclosed in a cabin + - Extraction outlet diameter: 4 x 150 mm - Dimensions (L x W x H): 3750 x 1750 x 1800 mm - Weight: 3300 kg ADVANTAGES – Four-head configuration – Ideal for wet and dry wood – Used machine, excellent condition Net price: 75,900 PLN Net price: 18,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with significant exchange rate fluctuations)

Condition: new, Year of construction: 2025, Working width: 410 mm Planing shaft: Tersa Number of knives: 4 Planer table length: 2000 mm Dressing fence angle adjustable: yes 45° to 90 Maximum passage thickness of thickness planer: 250 mm Height adjustment of thicknessing table: electric Planer thickness display: digital display Feed speed: 6/12 m/min Infeed roller: Steel Pgsdpfx Adel D Rwtonow Pull-out roller: steel Table rollers: no Motor power: 4.5 kW Motor brake: yes, automatic Suction connection: 120mm Machine length: 2000 mm Machine width: 882 mm weight: 615 kg

Condition: excellent (used), Catalogue number 6338 TECHNICAL DATA - Maximum working width: 230 mm - Maximum working height: 160 mm 7 spindles: 1) Bottom horizontal, 230 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 230 mm, 7.5 kW 5) Top horizontal, 230 mm, 7.5 kW 6) Bottom horizontal, 230 mm, 7.5 kW 7) Universal 360°, 230 mm, 7.5 kW - All spindles adjustable up/down and right/left - Spindle diameter: 40 mm - All spindles equipped with brake - Spindle speed: 6,000 rpm From above: - 6 geared, steel infeed rollers including 2 double rollers - 4 rubber outfeed rollers including 1 double roller - 3 outfeed pressure rollers From below: - Side pressure roller at infeed - Geared, swiveling, steel infeed roller in lower table - 3 smooth steel feed rollers - Pneumatically adjustable rollers - Length of infeed table: 1,190 mm - Centralized table lubrication - Electric planer thickness adjustment - Lifting motor: 0.56 kW - Stepless feed rate adjustment via inverter: 6–24 m/min - Feed motor: 3.7 kW - Cardan shaft roller feed - Enclosed in cabin - Extraction port diameter: 7 x 125 mm - Dimensions (L x W x H): 5,100 x 2,070 x 1,900 mm - Approximate weight: 5,000 kg ADVANTAGES - 7 heads - Universal spindle - Ideal for both wet and dry wood - Spindles equipped with brakes Podehp N R Iepfx Adnegw - Full technical documentation (DTR) - Used planer, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR at an exchange rate of 4.2 EUR (Prices may vary with larger fluctuations)

Condition: used, Year of construction: 2022, Working width: 410 mm Planing shaft: Tersa Number of knives: 4 Dressing table length: 2000 mm Dressing fence angle adjustable: yes 45° to 90 maximum passage thickness thickness planer: 250 mm height adjustment thicknessing table: electric display of planing thickness: mechanical digital display Feeding speed: 6 m/min Feed roller: steel Extraction roller: steel table rollers: no Engine power: 4.5 kW Motor brake: yes, automatic Suction connection: 120mm Pgodogqwxuepfx Adnjw Machine length: 2000 mm Machine width: 882 mm Weight: 615kg

Condition: excellent (used), Catalogue number 7832 TECHNICAL DATA - shaft width: 640mm - number of knives: 4 pcs - max. thickness of processed element: 300mm - digital planing thickness display – from above: - kickback fingers - sequential infeed roller - planing shaft - 2 smooth, driven, metal outfeed rollers – from below: - adjustable rollers in the lower table: 2 pcs - table on 4 screws - motor: 7.5kW - brake - electric table lifting - 2 feed speeds: 7/14m/min - feed motor: 0.75/1.1kW - extraction nozzle diameter: 160mm - dimensions (L/W/H): 1540x1220x1230mm - weight: 1300kg ADVANTAGES – Polish manufacture – electric table lift – sectional feed roller – used thickness planer, very good condition Net price: 32,900 PLN Net price: 7,840 EUR based on 4.2 EUR rate Psdpfxexzhxnj Adnjgw (Prices may change with significant variations in exchange rates)